Meta device open error

I have configured mirror on root hard disk on intel machine solaris 2.9.
Configured RAID5 (d50) on single disk on 03 partition(s0, s1 and s3).
My RAID 5 hard disk is faulty. I want to clear the d50 configuration from system. I gave a command
" metaclear -f d50 "
It gave me error saying "meta device open error".
How to clear the configuration?
Thanks in advance.

from another doc:
unmount the filesystem
metadetach mirror submirror
metaclear -r mirror
edit the vfstab to change mount

Similar Messages

Can't load ASIO driver / device could not be opened error in Audition CC but not Audition CS6

I have a M-Audio Fast Track Ultra USB 2.0 that I use for audio. I installed Audition CC and it wont let me use the ASIO driver for it. I get the device could not be opened error. On the same system I have Audition CS6 which works with the ASIO driver fine. Also have Vegas, Premiere, etc - all on the same machine and no problems with the M-Audio driver. I can load the Blackmagic ASIO driver but don't use that for audio mixing. Changing Use Machine Specific Device Defaults and Force Hardware to Sample Rate does nothing. Running Windows 7 64 bit.

M-Audio 64-bit driver is apparently troublesome, but the 32-bit one works fine - which explains why CS6 works and CC doesn't. As far as I can find out, you aren't the only person with this problem - have a look at this Reaper forum thread - you may get some useful information from it (no promises!)
http://forum.cockos.com/showthread.php?t=127129

Open Error 6: Device not configured

I recently had my hard drive replaced and restored to factory settings. I then used a time machine backup and the Migration Assistant to get everything I had back to where it belonged.
Things worked for a day or so, but with a few crashes here and there. Yesterday, I tried to use iTunes and kept getting an error message about the database (-50, unable to mount database). The problem is that the whole system would freeze and I had to shut down and restart every time. Sometimes I could load the OS, sometimes not. This morning I ran Disk Utility to verify the disk (it passed) and the permissions. When I tried to repair permissions, I got hundreds of messages like this : "Open Error 6: Device not configured on" and then a list of paths, such as "System/Library/Perl/5.10.0/darwin-thread-multi-2level/auto/POSIX/getgrgld.al", and "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/....." etc. Literally hundreds of those messages.
Does anyone know what this means? And how should I fix it?!?
Thanks!

I'm going to suggest that you ask in the Snow Leopard forums here:
http://discussions.apple.com/category.jspa?categoryID=263
This is likely a system software error, and the SL gurus that hang out over there might have suggestions for you.
Good luck!

Error message on reading device saying error dialog user not activated

error message on reading device saying error dialog user not activated. unable to open book to read

I had Adobe upgraded to from 1.2. to 4.1 on my Glow Light Nock at Barnes and Noble yesterday. I use a MacBook Pro 2011 upgraded to 10.10.1. I have never had a problem download a book from the library to my nook in the past. By the time I get this issue resolved, my 2 week book will be overdue and my book club discussion 1/21. I have been to the genius bar at Apple store--not their problem. Two trips to B&N and
the tech guy said he could fix the problem on a PC but not a Mac. It is not a Mac or Nook world.

Iphoto not opening. error message sent to Apple automatically but no reaction so far. has anyone a similar problem?

iphoto not opening. error message sent to Apple automatically but no reaction so far. has anyone a similar problem?
All screen sabvers using Iphoto dossier stopped working and meade me aware of a problem with iphoto (from ilife 11).
I reinstalled ilife 11, but it was not successful.
Anyone got a good tip on this?
Thanks, Michael

I've been having the exact same problem. It started 4-5 days ago
This is the error message i've been getting:-
Process:         iPhoto [509]
Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier:      com.apple.iPhoto
Version:         9.2.1 (9.2.1)
Build Info:      iPhotoProject-628000000000000~3
Code Type:       X86 (Native)
Parent Process: launchd [167]
Date/Time:       2011-11-16 21:55:44.487 +0530
OS Version:      Mac OS X 10.7.2 (11C74)
Report Version: 9
Interval Since Last Report:          186902 sec
Crashes Since Last Report:           9
Per-App Crashes Since Last Report:   7
Anonymous UUID:                      4A4FE4E1-35CB-46CA-962E-309E30C781D3
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: /Library/Frameworks/iLifeFaceRecognition.framework/Versions/A/iLifeFaceRecognit ion
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: image not found
Binary Images:
    0x1000 -   0xd1afeb com.apple.iPhoto (9.2.1 - 9.2.1) <68601E93-E4CF-3B4C-AFFD-4781A92DD58B> /Applications/iPhoto.app/Contents/MacOS/iPhoto
0xe83000 -   0xf63fe7 org.python.python (2.6.7 - 2.6.7) <61DBA92A-C39A-3A52-86F2-59CF9D310CB4> /System/Library/Frameworks/Python.framework/Versions/2.6/Python
0xfae000 - 0x114effb com.apple.geode (1.5 - 151.51) <28D29759-F356-3608-B9CF-3031F3299B1B> /Applications/iPhoto.app/Contents/Frameworks/Geode.framework/Versions/A/Geode
0x11ee000 - 0x11f0fff com.apple.iLifePhotoStreamConfiguration (2.2 - 2.2) <4FA61CE9-1718-3E07-9896-0023A2A49699> /Applications/iPhoto.app/Contents/Frameworks/iLifePhotoStreamConfiguration.fram ework/Versions/A/iLifePhotoStreamConfiguration
0x11f6000 - 0x1205fff com.apple.iLifeAssetManagement (2.0 - 2.33) <8346DE35-5F86-3338-9913-B035B3EE5435> /Applications/iPhoto.app/Contents/Frameworks/iLifeAssetManagement.framework/Ver sions/A/iLifeAssetManagement
0x1212000 - 0x123affb com.apple.iPhoto.Tessera (1.1 - 60.10) <7BA9184E-0A00-3083-8322-772ECBDD30C9> /Applications/iPhoto.app/Contents/Frameworks/Tessera.framework/Versions/A/Tesse ra
0x124b000 - 0x1272ffb com.apple.iPhoto.Tellus (1.3 - 60.10) <4AABB0BC-AC97-3EE4-BF0F-D8499DDB57C0> /Applications/iPhoto.app/Contents/Frameworks/Tellus.framework/Versions/A/Tellus
0x1287000 - 0x1291fff com.apple.iphoto.AccountConfigurationPlugin (1.2 - 1.2) <3B68F126-D783-3F86-AF04-A0F6A459BE67> /Applications/iPhoto.app/Contents/Frameworks/AccountConfigurationPlugin.framewo rk/Versions/A/AccountConfigurationPlugin
0x8fea2000 - 0x8fed49c7 dyld (195.5 - ???) <134323A7-49DC-3A9D-ACFD-32FAD0FD6BA2> /usr/lib/dyld
Model: MacBookPro4,1, BootROM MBP41.00C1.B03, 2 processors, Intel Core 2 Duo, 2.5 GHz, 2 GB, SMC 1.27f3
Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz, 0xCE00000000000000, 0x4D342037305432393533455A332D43453620
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz, 0xCE00000000000000, 0x4D342037305432393533455A332D43453620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.131.36.11)
Bluetooth: Version 4.0.1f4, 2 service, 11 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: Hitachi HTS542525K9SA00, 250.06 GB
Parallel ATA Device: HL-DT-ST DVDRW GSA-S10N
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd400000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0230, 0x5d200000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x820f, 0x1a110000 / 5            "
help would be much appreciated.
Regards,
Thimayya

Device Removal Error Notification

I accidentally stepped on the USB cable of my external hard drive and my computer showed a device removal error notification and that data might have been lost. I know properly ejecting the hard drive clears out the cache, but how can you tell what data was lost. Is it obvious like an entire folder/file would be missing, or would just pieces of data from a file be missing?
Also, it said data MIGHT have been lost or damaged. Is it possible that nothing happened at all?

It could potentially damage multiple files, but I would consider it unlikely. More likely it would damage the disk directory, affecting the entire drive, rather than damage more than the file being written. Again, though, I won't say it's impossible.
I've also tried to run Disk Utility on it to verify the disk, but it says the disk could not be unmounted
Got any software accessing the drive, such as iTunes, iPhoto, or anything else that might have a file open on the drive?
As to your query, what you're seeing seems normal. It's telling you how many files it sees (and "files" do not necessarily equal "documents"; it's what a computer considers to be a file, which can include all sorts of invisible items). As to what "clusters" are, there's a good explanation here:
http://www.dewassoc.com/kbase/hard_drives/clusters.htm
Regards.
Message was edited by: Dave Sawyer

POL 3012 device write error on windows mobile 6 and lite 10.2.0.1

Hi all,
This was an issue even some times ago and still appearing on and off for some clients and I did not find any recovery process which could be done remotely via the web to go admin.
1. When the device write error occurs we cannot initiate sync or any other from client or server and it just gives pol 3012.
2. If this happens to a client in far away area , how can we re configure the device from remotely (still device management is up and running).
3. If there is any mechanism to do a complete database refresh and re-create at client device from the admin functions in web to go device management.
4. Even the complete refresh sync has no use when this occurs and If we can delete and recreate the odb files only on the device it will be very convinient.
5. Currently only way i can see is just to uninstall the client and do a complete installation with deleting the odb files that arfe in the storage card.
Any help on this is highly appreciated.
Thanks
Paninie.

greetings:P
well in our client it doesnt work to "and then asked the user to ..." users usually dont know how to use the handheld , some times they are very old and we never ask the users to do something like deleting the files manually because that normally causes them to start complaining and say stuff like "your app sucks etc etc":(:(
my proposal is much simplier and will work i think for your purpose. you simply create a small c sharp application. you asked
"How to create it to stop DMAgent."
well thats very simple in c sharp and in most languages i think,
OpenNETCF.Diagnostics.Process is the namespace you need to work with, you simply kill the process with name dmagent.exe. this is the simplest way to close the dmagent in 5-6lines of code.(use the OpenNETCF.Diagnostics.Process class, from the OpenNETCF
library, which you can download from http://www.opennetcf.org)
then you use the normal file.delete to delete the files of the database, and then you want to do the sync, that can be easilly done through c sharp as you already do i guess.
the cab file i mentioned is simply the way to distribute the small c sharp app to all clients. it can be created with simply cab files generators which are freeware or through visual studio.
you can distribute the small app to all clients simply through the packaging wizard. so when a user has a problem you dont need to "ask the user to .." you just tell him ok, leave the the handheld alone for 15 minutes and it will get fixxed by itself, you send the command i described in my previous reply and the handheld's small app fixxes the problem. the user doesnt need to get involved. the cab file is sent to all clients (actually it is downloaded through oracle lite) . of course you dont wait for the problem to happen and then send the cab file. all users will have the cab file's small application preinstalled . it will be on the mobile device waiting for the command. so even if in some point this error occurs you can handle it. you dont wait for a user to call and say i have a problem and then send the cab file.
btw if you want to distribute your cab file you open the packaging wizard, edit your application..go in the file selection tab and select your cab file. the next time all users sync they will be asked to install the cab file. this is how we install our cab files, and this is how we install our application upgraded versions, we do not copy the cab files in a flash disk or send them with email or stuff like that. all application cab files are distributed through oracle lite remotely when ( i love olite for this, in other systems like mobilink you need to buy a second program to do that or else send your cab files through email.... ) .
code for stopping dmagent should look like about this
using OpenNETCF.ToolHelp;
ProcessEntry[] processes= ProcessEntry.GetProcesses();
foreach(ProcessEntry pe in processes){
if(pe.ExeFile.Equals("dmagent.exe")){
pe.Kill();
break;
stopping the dmagent is like stopping any other running process on the windows mobile.
so you have 5-6 lines of code for stopping the dmagent+1-2 lines for the file.delete (for the database files)+1 line for the c sharp olite synchronization . your app shouldnt be more than 10 lines of code i think.
we have used this cab file tactic which was proposed from an oracle lite representative actually after our request for creating a server side initiated synchronization which syncs a specific set ot tables with push only. we wanted the guy on the office to have a small java app which will have a button that sends a specific command on the handheld that forces it without the user concent to sync some specific tables with push only , the normal synchronize databases command can not do this job, so we created our own small c sharp app, which is distributed as a second cab file (the first is the main app) and the users now in the office have a small java util where they select the user and then send the command (using the java apis). so this second cab file+command tactic can help in solving a lot of problems. give it a try.

Podcasts - File Open Error N97 mini

I have successfully downloaded podcasts with my N97 mini, but when I go to open/play the podcast I keep getting a "File Open Error" ???

Podcast Library Refresh - General Error
1. Connect your 5800 to you PC in Mass Storage Mode OR connect the microSD to your PC via a Memory card reader.
2. Open Windows Explorer and browse to your memory card drive ..
- To remove and start fresh start go to E:\Private\10281e17 There you should see 4 files 2 are Mp3 files other are Podcast files. Delete the whole 10281e17 folder, its not harm since our device will automatically create a new structure of the folder.
TQ
I'm an Xploit - Please feel free to post your issues, feedbacks in this discussion forum and I'll do my level best to help, otherwise my knowledged friends whom are around willing to help you. Thank you !

Adobe reader met with unexpected error

Hi all,
I've been bombed with this problem for so long, I'd greatly appreciate it if anyone can give any suggestion. The problem is: My adobe reader 7.0.8 or 8.0 are constantly met with unexpected errors. It just doesn't work, I can't open any files with it. Did anyone have similar problems before? Is there any hidden files I have to delete before installing a newer version or something else?
thanks!!

Here are more details:
I had adobe reader 6.0, the only version that was working on my mac, in my application library. I tried to upgrade it to version 8.0. I downloaded and installed adobe reader 8.0 alright, no problems there. But after installation was complete, the Reader restarted itself and crashed, showing me the message "The adobe reader met with unexpected error." and could not even function, not to mention opening any files. It happened with 7.0.8 before as well. I had no other way but to change it back to 6.0. But it's really bugging me because compared to the latest versions, 6.0 isn't really that good. So please help! thanks
I'm using powerpc G4 ibook tiger 10.4.8

Meta device question

How can I find out how much space I have left on a meta device? I am using solaris 9.

Hi.
You have mirror d10 with configureger only one submirror d11.
What reason configure mirror withot real mirror ? You only lose performance.
After somthing error LVM do not have access to device c3txxxxxxxxxxxx037F0000d0s0 and mark this device as neeaded maintance.
Becouse it was last work submirror in mirror configuration, this device mark as Last erred.
This flag used in dual submirror confgiguration for found device with latest information whan both submirrors failed.
What You can do at this state.
On your choice:
1. Ignore this problem. Becouse clear this error don't increase availability of this device.
2. Stop application. Umout device d10
   metaclear d10
   metaclear d11
Change /dev/md/dsk/d10 (/dev/md/rdsk/d10) on /dev/dsk/c3txxxxxxxxxxxx037F0000d0s0.
Remount used FS, start application.
After this you will use direct device instead middle mirror.
3. Recreate Mirror/Submirror.
   metaclear d10
   metaclear d11
   metainit d11 1 1 c3txxxxxxxxxxxx037F0000d0s0
   metainit d10 -m d11
Remount used FS, start application.
I write commands with default values of some parameters. Current miror specific parameters you can see:
   metastat -p d10
   metastat -p d11
Of course you need do it before metaclear.
Output of this commands you can use for recreate device.
For trubleshuting what happens with device and why d11 change status to "Needs maintenance" You need analyze files /var/adm/messages* and find all errors/ warning messages about disk device.
Regards.

ITunes wont open Error -200

yep
well there i was opening iTunes
and BLAMMO !
ITunes wont open
error -200
what am i doing wrong now
also coincedently my sound output aint working

Also, I have not moved any files since updating. Still won't do anything.

Windows 7 64bit has an MTP USB Device Failed error message when I attach my Ipad1

I keep getting an MTP USB Device Failed error message when I plug in my USB cable into my Ipad1. Can someone help?

This is NOT resolved. The "Upper..."Key in the registry editor doesn't exist as you can see below in the image I am providing. This is still an OUTSTANDING issue, can someone please help with resolving this issue, super frustrating.
This is not just an iPAD issue, I get the same problem with my iPhone as well, both (iPhone and iPad) have the latest iOS 6.1.3 installed as well.

HT1420 Cant get itunes to open.Error message:"its on a locked Cant get itunes to

Cant get itunes to open.Error message:"its on a locked disk." What does this mean??!!

ok heres what u gotta do
yes i know its alot of steps but if you do them right it will work.
1.remove all active versions of itunes
2.then restart as it asks you to do, if it doesnt ask do it your self
3.unplug ipod
4.remove ipod software
5. restart
6.install the cd the ipod came w/
7.when it asks you if you want to upgrade itunes say yes
8.download the file
9.intall the newest version
10.restart
if you have done exactly these steps(exactly in this order)then itunes should be working now

Cursor open error SQLSTT - 72000, SQL code - 969

We have purchased a product called Access Manager for DB2 and installed it on our AS400. This gives us the connectivitiy to Oracle server with which we do the Warehouse management software interface using our legacy system on AS400.
I have written several programs in SQLRPGLE and not quite sure as to how I can handle errors coming out of Oracle server.
As per my knowledge in my programs, I do
declare cursor
open cursor
fetch
dow look for sqlstate
fetch next row
enddo
close cursor
I am also new to this much of SQL.
Now, my programs are running in production and works just fine if we don;t have any issues with oracle server (database server down etc.).
My question is if the database server goes down for any reason, my SQLRPGLE progam starts giving me cursor not open errors, the actual error is as follows:
Connection to relational database HJAWCD1 already exists.
ARDUPAR: ARDUPAR: rc=-1(OCI_ERROR) from OCIStmtExecute when asking for
Describe-Info
ARDUPAR(1): ORA-03114: not connected to ORACLE
ARDAROC: rc = -1 from parse
SQLSTATE class unknown - SQLSTATE 72000, SQLCODE -969.
Cursor SEHOST not open.
Cursor SEHOST not open.
Cursor SEHOST not open.
So although, the connection exist between the AS400 and Oracle server as suggested from first statement, but then the cursor is giving me problems of not opening.
what I would like to know is how do I check in my SQL statement the error and somehow reconnect and open the cursor again.
Please help in this regard, since I am not finding any help from iseries world becuase no one seems to have knowledge about this product that we have installed and I don;t have too mcuh of documentation on the product nor do I have any sample handling messages program using RPGLE between oracle and AS400 using the product.
Regards
Farhan Qadri

It's been over a decade since I worked on an AS/400 (iSeries), but I've seen an ORA-03114 is thrown from the OCI when you've attempted an illegal statement. That error typically means you are no longer connected to the database. I'd guess that your new application has a defective RPG error management routine.
Good luck, Michael

My Microsoft Word is not opening - error 1712

my Microsoft Word is not opening - error 1712 - Mac OSX version 10.6.8 - processor 2GHz Intel Core 2 Duo - Memory 2 GB667 MHzDDR2 SDRAM
my memory is been nearly used up, I have withdrawn 2 GB of archives so that I can continue using my machine, as I am down in Brasil and yet could not find more memory, so I have asked a friend of mine who lives in London to buy me 5 GB more. But as I have done that, once I tried to open an archive, it didn't do so, & I got the 1712 message - I thought of re-iniciating the PC, but I just have a big work document down at the dock, which I cannot loose. I am afraid that if I re-start the Pc I wil loose the document. So I need a way to get the document out of the dock to a file, before I re-start my machine.

Following thread could help you resolve the issue.
Word is not opening error -1712 ,can anyone help please

Meta device open error

Similar Messages

Maybe you are looking for