Metachain failed with status 'X'.

Hi experts,
I have an issue with the meta chain which has been canceled with the status 'X'.And some of the local process chains are not getting triggered.
Please help me.
Regards
Sam

Hi Sam,
Could you please explain your issue in detail. At what step your process chain got failed.
open the chain in RSPC1 --> goto logs view ---> right click on step which got failed --> select display messages
here check the log, you will find the error or post the log here.
You told you local chain have not triggered, is the above step got completed. make sure your local chains start condition is immediate.
check you have enough back ground processes in SM50 and SM51.
Regards,
Venkatesh.

Similar Messages

Windows Server 2008 SP2 randomly reboots due to lsass.exe failed with status code 255

Hello,
Any help on this issue would be greatly appreciated. I have an older Windows Server 2008 SP2 (I don't believe it is R2) (running SQL Server 2008 and SSRS 2008 on the machine) that is crashing randomly
during business hours. Looking into the event logs, I have found the following:
Faulting application lsass.exe, version 6.0.6002.18541, time stamp 0x4ec3ca01, faulting module msvcrt.dll, version 7.0.6002.18551, time stamp 0x4ee8d118, exception code 0xc0000005, fault offset 0x00000000000011ad, process id 0x284, application start
time 0x01d066d9669a3e1c.
A critical system process, C:\Windows\system32\lsass.exe, failed with status code 255. The machine must now be restarted.
The process wininit.exe has initiated the restart of computer RIDEDB02 on behalf of user for the following reason: No title for this reason could be found
Reason Code: 0x50006
Shutdown Type: restart
Comment: The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code 255. The system will now shut down and restart.
I found a Hot Fix for a similar issue (https://support.microsoft.com/en-us/kb/2732595?wa=wsignin1.0), but it appeared to only be applicable to Windows Server 2008 R2 and Windows 7.
A few hours later, the crash happened again, with a slightly different error:
The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code -1073741819. The system will now shut down and restart.
Faulting application lsass.exe, version 6.0.6002.18541, time stamp 0x4ec3ca01, faulting module msvcrt.dll, version 7.0.6002.18551, time stamp 0x4ee8d118, exception code 0xc0000005, fault offset 0x00000000000011ad, process id 0x284, application start
time 0x01d066fa9d74c5d7.
A critical system process, C:\Windows\system32\lsass.exe, failed with status code c0000005. The machine must now be restarted.
The security package Kerberos generated an exception. The exception information is the data
I have been unable to find a reason for these exceptions and the server rebooting. Any thoughts or ideas on how I can correct this error so it doesn't reboot our server again? .
Thank you,
Ben

Hello,
Any help on this issue would be greatly appreciated. I have an older Windows Server 2008 SP2 (I don't believe it is R2) (running SQL Server 2008 and SSRS 2008 on the machine) that is crashing randomly
during business hours. Looking into the event logs, I have found the following:
Faulting application lsass.exe, version 6.0.6002.18541, time stamp 0x4ec3ca01, faulting module msvcrt.dll, version 7.0.6002.18551, time stamp 0x4ee8d118, exception code 0xc0000005, fault offset 0x00000000000011ad, process id 0x284, application start
time 0x01d066d9669a3e1c.
A critical system process, C:\Windows\system32\lsass.exe, failed with status code 255. The machine must now be restarted.
The process wininit.exe has initiated the restart of computer RIDEDB02 on behalf of user for the following reason: No title for this reason could be found
Reason Code: 0x50006
Shutdown Type: restart
Comment: The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code 255. The system will now shut down and restart.
I found a Hot Fix for a similar issue (https://support.microsoft.com/en-us/kb/2732595?wa=wsignin1.0), but it appeared to only be applicable to Windows Server 2008 R2 and Windows 7.
A few hours later, the crash happened again, with a slightly different error:
The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code -1073741819. The system will now shut down and restart.
Faulting application lsass.exe, version 6.0.6002.18541, time stamp 0x4ec3ca01, faulting module msvcrt.dll, version 7.0.6002.18551, time stamp 0x4ee8d118, exception code 0xc0000005, fault offset 0x00000000000011ad, process id 0x284, application start
time 0x01d066fa9d74c5d7.
A critical system process, C:\Windows\system32\lsass.exe, failed with status code c0000005. The machine must now be restarted.
The security package Kerberos generated an exception. The exception information is the data
I have been unable to find a reason for these exceptions and the server rebooting. Any thoughts or ideas on how I can correct this error so it doesn't reboot our server again? .
Thank you,
Ben

CMPControlManager::PublishInDNS: DnsReplaceRecordsInSet() failed with status 9005 in MPControl.log and MP is showing in critical state

CMPControlManager::PublishInDNS: DnsReplaceRecordsInSet() failed with status 9005 error message in mpcontrol.log and management point showing critical state in Monitoring-Site status
Please help to resolve the same.

Based on this thread ---> http://social.technet.microsoft.com/Forums/systemcenter/en-US/f66a8f0f-31df-49b1-b385-450c522aac0f/cmpcontrolmanagerpublishindns-dnsreplacerecordsinset-failed-with-status-9005-getting-this?forum=configmgrinventory
a possible workaround is:
1. Start DNS
2. Navigate to following DNS SRV record: _mssms_mp_<SMS_SiteCode>._tcp.AD_FQDN
3. Right click on this record; and add all MP Machines Account and provide Full Control permissions on this DNS SRV Record.
4. Restart "SMS_EXECUTIVE" service on all MPs
You will then see that each MP will successfully register each DNS SRV records successfully.

Function module ZBAPI_DELV_HU_DETAILS is failing with status TARGET_METHOD_

Hi,
Function module ZBAPI_DELV_HU_DETAILS is failing with status TARGET_METHOD_EXCEPTION external server. What could be the reason for this?
This Function Module will be called within program ZMWXO011. This program will be configured in the output determination for HU's. It will be triggered whenever a relevant HU is created. The BAPI will extract Delivery & HU level data that is required by Exacta & Scan code and send to a predefined TRFC Queue.
Thanks & Regards,
Srinivas Reddy.

Hi Efren,
Go to transaction ST22 and check for any dump.
The work item is in process, so there will be a dump in the system.
The Function module parameters could be a problem.
ST22 transaction will give you details about the dump.
Thanks,
Viji.

Sharepoint 2013 webDAV PROPPATCH fails with status code 409 error every time when trying to set custom property.

Sharepoint 2013 webDAV PROPPATCH fails with status code 409 error every time, when trying to set custom property.
anyone have any idea

Hi
Stumbled upon the resolution myself. The Bean Area item needs to be set to Visible=Yes in the property palette for the bean within Forms Builder, and also the implementation class also in the bean's properties must match exactly the package & class name specified in the PJC (my full implementation class string had to be set to oracle.forms.demos.runApplication).
As this bean has no user interface component, and since the Visible property has to be set to Yes, to avoid having a random square shape for the bean sitting on the form's canvas, I also set the Width and Height properties for the bean to 0.001. This does show a very small dot on the form, but that will be acceptable.
So in summary there has been a change for PJC / Bean Areas between 6i and 10g Forms, in 6i you could have the Bean Item to be set Visible=No, and the SET_CUSTOM_ PROPERTY built-in would work, however in 10g Forms the Bean Item must be set to Visible=Yes for the SET_CUSTOM_PROPERTY built-in to work.
Daryl

Profile Manager: Service has failed with status 500?

I am getting a "Service has failed with status 500" error when trying to enroll a device with profile manager. Does anyone have a resolution for this?

In OS X Server 2.1.1 there seems to be an error, according to: https://discussions.apple.com/thread/4365626?start=0&tstart=0

Idoc failed with status 51 for Warning/Information messages

Hi All,
We are trying to create some Sales Orders with the help of Idocs. We are facing some problem as mentioned below.
1.There are some warning messages/information messages written in standard Sales Order User Exit USEREXIT_SAVE_DOCUMENT_PREPARE
2.As soon as the Idoc processing reaches any of these messages, it considers them as ERROR message and Idoc fails with the status as 51 which is not expected.
3.Also, I see that the Sales Order is saved with the data that has been passed in the Idoc.
Is this the standard behavior ?? (Or) Is there any EDI related configuration setting which can be used to suppress these kind of messages in Idoc Processing ??
Any help on this would be highly appreciated.
Thanks,
Babu Kilari

if your IDOC has status 51 then it is not posted, hence your sales order cannot be created from this IDOC. of course this error behaviour can be originated by the user exit.
please read OSS note Note 747631 - Some tips when testing idoc_input_orders

Failed with status 400 creating new room.

Hi,
I am using the server API to create a new room, but I fail with a response code of 400. Can you tell me what I am doing wrong?
I'm using the sample Java server integration code to do this.
Thanks.

Hi Raff,
Here are the logs when I set Utils.DEBUG = true;
http_get: http://connectnow.acrobat.com/xoomxo?mode=xml&accountonly=true&
Redirecting to https://na2.connectnow.acrobat.com/xoomxo?mode=xml&accountonly=true&
http_get: https://na2.connectnow.acrobat.com/xoomxo?mode=xml&accountonly=true&
Content-Type: text/xml;charset=UTF-8
Content-Length: 177
http_post: https://services.acrobat.com/account/wsapi/auth/v1 <request><username>[email protected]</username><password>bizzybaz1</password></request>
{Content-Type=text/xml}
Content-Type: text/xml;charset=UTF-8
Content-Length: 127
http_get: https://na2.connectnow.acrobat.com:443/xoomxo?mode=xml&accountonly=true&gak=cmVuZ2EqbmExci oxMjcwYzUwMDgyMipFQ1E5WjdHMkpENUE1NDlLUFpDUVA4UU1OUg==
Content-Type: text/xml;charset=UTF-8
Content-Length: 323
http_post: https://na2.connectnow.acrobat.com:443/xoomxo mode=xml&room=xoomxoroom2.15_Room&template=dateroomtemplate&gak=cmVuZ2EqbmExcioxMjcwYzUwM DgyMipFQ1E5WjdHMkpENUE1NDlLUFpDUVA4UU1OUg==
HTTP error 400
Does this show what might be causing the error?
Thanks,
Barry

IDOC Posting To XI Failed With Status Text "::000" in SM58

Hello Gurus
Can u please suggest me how to overcome the problem with Custom Idocs while trying to send from SAP R/3 to SAP PI(XI).
The status text is displaying as "::000" with no other details, in SM58 of the sender system i.e. SAP R/3.
The Idocs status in the sender system is showing as 03 with the message "Idoc sent to sap system" in transaction BD87.
So I am getting confused where I missed the configuration.
Please suggest how I can troubleshoot the above.
<<Text removed>>
Regards,
Rk.K
Thanks in advance .
Edited by: Matt on Jun 24, 2011 9:58 AM

Thanks a lot for your support.
I have tried all the suggested solutions......but my problem was not solved.
The Metadata should be automatically created when the IDOCS successfully received by the XI server.
If it is not created then we should clear the SLD Cache in XI and try to create a new Metadata by giving the Custom IDOC Name and Port.
Even I tried with a Standard Idoc ORDERS05 , but I failed to do so.
After doing the above step I am getting the Information pop-up message "I::000".
Regarding RFC, I have created 2 users in both the systems with the same name(ALEREMOTE) of type "System".But,I am unable to Remote Login from XI to R/3 whereas the vice -versa is successful.
Are there any chances for this being the reason for failure of Idoc processing?
Such information message"I::000" is completely inexplainable.
Kindly, suggest a solution for it.
Thanks.

SM13 Update Request Failed entries with status "Enqueques deleted"

Hi Experts,
I viewed transaction SM13 and there are entries whereas the updated request is failed and the status is "Enqueque deleted". Unlike with other updated request failed with status "Error", error message is provided. However for those with "Enqueque deleted" there's NO error. Do you have any idea what went wrong having such status? Thanks in advance!
Best Regards,
Kurtt

Hi Royit,
Thank you very much for your response. are there any means of tracing who deleted/released it? Thanks in advance!
Best Regards,
Kurtt

GetItemsRequest failed with HTTP status 400

At one of our customers we've got a strange error.
The Login/Logout request works fine, but the getItemsRequest fails with status 400.
Here is the soap request:
------- SoapRequest at 13:29:22 -------
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><soap:Header><session xmlns="http://schemas.novell.com/2005/01/GroupWise/types">BbOOBFebTkAxSffn</session></soap:Header><soap:Body><getItemsRequest xmlns="http://schemas.novell.com/2005/01/GroupWise/methods"><view>default id container @type message subject startDate endDate attachments recipients status</view><filter><element xsi:type="FilterGroup" xmlns="http://schemas.novell.com/2005/01/GroupWise/types"><op>and</op><element xsi:type="FilterEntry"><op>contains</op><field>subject</field><value>*</value></element></element></filter><items><item xmlns="http://schemas.novell.com/2005/01/GroupWise/types">4ECE5BEE.GWDOMNM.GWPOSTNM.100.1333466.1.16E BA.1</item></items><count>-1</count></getItemsRequest></soap:Body></soap:Envelope>
POA is 8.0.2, any suggestions?

There is not enough information.
You could check the POA log file.
You can turn on logging the soap requests in the POA log file
to see if that shows the error around the time on the soap
request.
If you get an 8.0.x build after 98083, we put the engine
error in an HTTP header line:
X-GWError-Code: xxxx
Preston
>>> On Wednesday, January 04, 2012 at 6:26 AM,
hkunze<[email protected]> wrote:
> At one of our customers we've got a strange error.
> The Login/Logout request works fine, but the getItemsRequest fails with
> status 400.
>
> Here is the soap request:
>
> ‑‑‑‑‑‑‑ SoapRequest at 13:29:22 ‑‑‑‑‑‑‑
>
> <?xml version="1.0" encoding="utf‑8"?>
> <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"
> xmlns:xsi="http://www.w3.org/2001/XMLSchema‑instance"
> xmlns:xsd="http://www.w3.org/2001/XMLSchema"><soap:Header><session
> xmlns="http://schemas.novell.com/2005/01/GroupWise/types">BbOOBFebTkAxSff
> n</session></soap:Header><soap:Body><getItemsRequest
> xmlns="http://schemas.novell.com/2005/01/GroupWise/methods"><view>default
> id container @type message subject startDate endDate attachments
> recipients status</view><filter><element xsi:type="FilterGroup"
>
xmlns="http://schemas.novell.com/2005/01/GroupWise/types"><op>and</op><eleme
nt
>
xsi:type="FilterEntry"><op>contains</op><field>subject</field><value>*</valu
e></elemen
> t></element></filter><items><item
> xmlns="http://schemas.novell.com/2005/01/GroupWise/types">4ECE5BEE.GWDOMN
>
M.GWPOSTNM.100.1333466.1.16EBA.1</item></items><count>‑1</count></getItems
Request></s
> oap:Body></soap:Envelope>
>
> POA is 8.0.2, any suggestions?

Creating Open Directory Replica fails with Server Admin Error Value 1127

Hallo,
I have seen a lot of similar threads here and they were helpful up to a certain point, but in the end, they did not solve my problem.
Currently, it comes down to this. The Server Admin Error message ist really meaningless and I could not find a single for the error value on the whole wide web. As such, I switched to the command line versions of the tools involved to geht more meaningful results. It worked. Specifically, creating a replica of an openldap master means using slapconfig.
When executing
slapconfig -createreplica master.ourdomain.com diradmin
as root on the prospective replica machine, I get the following error message:
ssh command failed with status 127
That command is not allowed with the root account via public key authentication.
That makes perfect sense to me, but how is it meant to work then?
Executing slapconfig as admin tells me that this tool is to be executed as root. On the other hand, root login via ssh is not allowed in Mac OS X by default, which seems fine to me. I even changed /etc/sshd_config on the Open Directory Master machine to "PermitRootLogin yes". However, neither reloading ssh using launchctl nor restarting the whole server made this setting operational. Trying to login from command line as root still tells me:
root login is not permitted to this machine via public key authentication.
While this is the current state where I need help urgently, I changed some other things before. I tell about to exclude these issues as possible reason of failure. I got this message for quite a while:
Replica Setup failed : This machine does not have a valid computer name
I was sure, this machine meant the target machine, the open directory master, because the domain had changed there once before I had taken over responsibility as an admin in this environment. And in fact, changeip disguised an issue there. The command proposed by changeip to fix the situation did not seem appropriate because this machine is multihomed with a public and a private IP adress. Proper name resolution is available for both interfaces including reverse lookup. I dont like this setup, but it was the only way to get mail service running smoothly. Running changeip on the machine itself using these arguments
changeip /LDAPv3/127.0.0.1 internalIP internalIP old.ours.com current.ours.com
reported success in updating password server, open directory, both interfaces, hostconfig (which in fact did not change) and samba. It reported an issue with kadmin which is related to Kerberos (we dont use Kerberos yet).
Changing the hostname of the server using changeip did not solve the issue. I then found the hint to check with scutil. This showed that the Hostname was not set on the prospective replica machine. (A question aside: in how many place is the hostname stored? The traditional /etc/hostname has gone, but seems to be replaces with several other configuration files and databases. I cant see this as an advantage). Setting the hostname using scutil worked fine. However, it did not solve the problem either. At least, slapconfig now started to complain about not being able to log in as root instead of failing from the start.
I also checked all log files on bboth machines that might have to do with openldap, as there are /var/log/slapd.log, /var/log/system.log and /Library/Log/slapconfig.log. I also checked the log of th layer on top of openldap which is /Library/Log/DirectoryService.server.log. None of them revealed anything noticeable beside a lot of of entries that I have googled in the last few hours and which all dont seem to be associated with the problem in question.
I will take a break now, but I have to fix this until tomorrow and I hope to get the ultimate hint from you, dear reader.
Thanks and bye, Christian Völker

ssh command failed with status 127
That command is not allowed with the root account via public key authentication.
Initial OD replication takes place via 'ssh'. If you have 'sshd' configured on the OD Master to authenticate with public keys then the OD replica will not be able to communicate with the OD Master via 'ssh'. You must configure the OD Master to use 'ssh' with password authentication and root login enabled.
Demote the replica back to standalone. Stop any services that you may have running on the primary network interface. Then stop any services that you may have running on the secondary network interface. In the 'Network' System Prefpane remove the IP number from the secondary interface then deactivate the secondary network interface.
Assign the private IP address and hostname that you wish to use for the replica to the primary network interface. Assign the 'public' IP number to the secondary interface. Check the DNS to see that the IP address and hostname for the primary network interface resolve both forward and reverse for the hostname of the replica that you have chosen. If it does not, fix your DNS before proceeding.
In the 'Sharing' System Prefpane, change the name of the machine to the hostname (server.domain.tld) of the replica that you have chosen. Then use 'changeip -checkhostname' to see if the IP/hostname matches. Fix it if it doesn't.
Then configure the /etc/sshd_config file on the OD master like this:
\# Authentication:
PermitRootLogin yes
PasswordAuthentication yes
PubkeyAuthentication no
and the /etc/ssh_config file on the OD replica like this:
PasswordAuthentication yes
PubkeyAuthentication no
Then from the OD replica as the 'root' user issue:
slapconfig -createreplica <ODMasterIPorFQDN> <diradmin user>
Make sure that the 'diradmin' user's password contains only alpha-numeric characters -no 'option-characters' or symbols, change it first if it does. Once the process completes, reactivate the secondary interface for the 'public' IP and check the configuration of services that will be using that IP, then start your other services. Secure the 'ssh' service on both machines to disable password authentication and 'root' logins.

Email on Idoc Failure with Status 56 64 68 69 70

We have standard inbound idoc processing for Basic Type : DELVRY01 and Message Type : DESADV using the function module IDOC_INPUT_DESADV1.
We currently have a requirement to send an email, when any of these type of Idocs fail with status 56, 64, 68, 69 and 70.
Where would be best place to provide this solution to send an email to a particular user when the Idoc fails with the above status?

Hello Saleem,
One approach would be to consider workflow based on object type IDOCAPPL. The start condition for the workflow could be the triggering of the event errorProcessCompleted. You could filter further by status and your message type (DESADV ) to only start the workflow for the errors that you mentioned. The workflow could then send an email.
You will need to verify the details for your own scenario.
Good luck,
Greg Kern

Printing on HP Designjet 5500 with foomativ exits with status 9

Printing on HP Designjet 5500 over TCP/IP or Bonjour using Foomatic-RIP fails with status 9. Trying to use other drivers (HP Designjet 750C (gimp-print)) works for page sizes smaller that DIN A3 but crashs the printer for bigger sizes.
For Foomatic-RIP I get following messages in /var/log/cups/error_log:
I \[08/Jul/2009:19:18:29 \+0200] Job 10 queued on '129_247_20514' by ''.
I \[08/Jul/2009:19:18:29 \+0200] Started filter /usr/libexec/cups/filter/pstopdffilter (PID 14639) for job 10.
I \[08/Jul/2009:19:18:29 \+0200] Started filter /usr/libexec/cups/filter/cgpdftopdf (PID 14640) for job 10.
I \[08/Jul/2009:19:18:29 \+0200] Started filter /usr/libexec/cups/filter/foomatic-rip (PID 14641) for job 10.
I \[08/Jul/2009:19:18:29 \+0200] Started backend /usr/libexec/cups/backend/lpd (PID 14642) for job 10.
E \[08/Jul/2009:19:18:30 \+0200] PID 14641 stopped with status 9!
I \[08/Jul/2009:19:18:30 \+0200] Hint: Try setting the LogLevel to "debug" to find out more.
I have the following configuration:
OS-X 10.4.11, gs 8.6.4, pxlmono 1.2, Foomatic-RIP 4.0.2.211, HP DesignJet_5500-cdnj500.ppd
The printer is connected on Ethernet and is in the same network segement (it is visible in AppleTalk and Bonjour. A connection with TCP/IP (lpd) is also possible.
Message was edited by: Lefti

I've built foomatic against the ghostscript install as your instructions say; compilation and installation all seems to be fine with no errors but prints still do not appear on the printer.
Is there anything else I can try?
Many Thanks and apologies for the huge length of this post...
Sam
GPL Ghostscript 8.70 (2009-07-31)
gs -h | grep 'cdnj500': cdj550 cdj670 cdj850 cdj880 cdj890 cdj970 cdjcolor cdjmono cdnj500 cfax
foomatic rip version 4.0.2.211
One thing that I have noticed is that the cups error log has a lot of authentication entries, though they all seem to result in OK;
D [18/Aug/2009:14:17:00 +0100] cupsdReadClient: 15 POST / HTTP/1.1
D [18/Aug/2009:14:17:00 +0100] cupsdAuthorize: No authentication data provided.
D [18/Aug/2009:14:17:00 +0100] Get-Printer-Attributes ipp://localhost/printers/designjet5500__Q1251A___00306ECA2FB9
D [18/Aug/2009:14:17:00 +0100] cupsdProcessIPPRequest: 15 status_code=0 (successful-ok)
This is the output from the foomatic log:
foomatic-rip version 4.0.2.211 running...
called with arguments: '3', 'sam', 'testprint.ps', '1', 'APDInputSlot= pserrorhandler-requested=standard nocollate com.apple.print.PrintSettings.PMColorMatchingMode..n.=0 com.apple.print.JobInfo.PMJobName=testprint.ps APColorMatchingMode=APApplicationColorMatching job-uuid=urn:uuid:1ef0b25d-dd27-3022-64ab-19ebcf88a67f'
Getting input from file
Parsing PPD file ...
Added option PageSize
Added option ImageableArea
Added option PaperDimension
Added option InputSlot
Added option Quality
Added option Font
Parameter Summary
Spooler: cups
Printer: 43_194_241139
Shell: /bin/bash
PPD file: /private/etc/cups/ppd/43_194_241139.ppd
ATTR file:
Printer model: HP DesignJet 5500 Foomatic/cdnj500 (recommended)
Options: APDInputSlot= pserrorhandler-requested=standard nocollate com.apple.print.PrintSettings.PMColorMatchingMode..n.=0 com.apple.print.JobInfo.PMJobName=testprint.ps APColorMatchingMode=APApplicationColorMatching job-uuid=urn:uuid:1ef0b25d-dd27-3022-64ab-19ebcf88a67f
Job title: testprint.ps
File(s) to be printed:
<STDIN>
Ghostscript extra search path ('GS_LIB'): /usr/share/cups/fonts
Printing system options:
Pondering option 'APDInputSlot='
Unknown option APDInputSlot=.
Pondering option 'pserrorhandler-requested=standard'
Unknown option pserrorhandler-requested=standard.
Pondering option 'nocollate'
Unknown boolean option "nocollate".
Pondering option 'com.apple.print.PrintSettings.PMColorMatchingMode..n.=0'
Unknown option com.apple.print.PrintSettings.PMColorMatchingMode..n.=0.
Pondering option 'com.apple.print.JobInfo.PMJobName=testprint.ps'
Unknown option com.apple.print.JobInfo.PMJobName=testprint.ps.
Pondering option 'APColorMatchingMode=APApplicationColorMatching'
Unknown option APColorMatchingMode=APApplicationColorMatching.
Pondering option 'job-uuid=urn:uuid:1ef0b25d-dd27-3022-64ab-19ebcf88a67f'
Unknown option job-uuid=urn:uuid:1ef0b25d-dd27-3022-64ab-19ebcf88a67f.
Options from the PPD file:
Starting process "reset-file" (generation 1)
reset-file exited with status 0
================================================
File: <STDIN>
================================================
Filetype: PostScript
Reading PostScript input ...
--> This document is DSC-conforming!
Found RBINumCopies: 1
Found: %%BeginProlog
Found: %%EndProlog
Found: %%BeginSetup
Found: %%BeginFeature: *PageSize Letter
Option: PageSize=Letter
Setting option
Found: %% FoomaticRIPOptionSetting: PageSize=Letter
Option: PageSize=Letter
Setting option
Found: %%BeginFeature: *Quality normal
Option: Quality=normal
Setting option
Found: %% FoomaticRIPOptionSetting: Quality=normal
Option: Quality=normal
Setting option
Found: %%EndSetup
Inserting PostScript code for CUPS' page accounting
New page: %%Page: 1 1
Found: %%BeginPageSetup
Inserting option code into "PageSetup" section.
Flushing FIFO.
Starting renderer with command: "/usr/local/bin/gs -sstdout=%stderr -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=cdnj500 -dDEVICEWIDTHPOINTS=612 -dDEVICEHEIGHTPOINTS=792 -dQuality=0 -sOutputFile=%stdout -_"
Starting process "kid3" (generation 1)
Closing renderer
Starting process "kid4" (generation 2)
Starting process "renderer" (generation 2)
JCL: -12345X@PJL
@PJL SET MEDIASOURCE=AUTOSELECT
@PJL SET CUTTER=OFF
<job data> -12345X@PJL RESET
PAGE: 1 1
renderer exited with status 0
kid4 exited with status 0
kid3 finished
kid3 exited with status 0
Closing foomatic-rip.
And the output from CUPS error_log (trimmed to remove duplicates etc.):
D [18/Aug/2009:14:17:00 +0100] Print-Job ipp://localhost/printers/designjet5500__Q1251A___00306ECA2FB9
D [18/Aug/2009:14:17:00 +0100] [Job ???] Auto-typing file...
I [18/Aug/2009:14:17:00 +0100] [Job ???] Request file type is application/postscript.
D [18/Aug/2009:14:17:00 +0100] add_job: requesting-user-name="sam"
D [18/Aug/2009:14:17:00 +0100] Adding default job-sheets values "none,none"...
I [18/Aug/2009:14:17:00 +0100] [Job 2] Adding start banner page "none".
D [18/Aug/2009:14:17:00 +0100] Discarding unused job-created event...
I [18/Aug/2009:14:17:00 +0100] [Job 2] Adding end banner page "none".
I [18/Aug/2009:14:17:00 +0100] [Job 2] File of type application/postscript queued by "sam".
D [18/Aug/2009:14:17:00 +0100] [Job 2] hold_until=0
D [18/Aug/2009:14:17:00 +0100] Discarding unused printer-state-changed event...
D [18/Aug/2009:14:17:00 +0100] [Job 2] job-sheets=none,none
D [18/Aug/2009:14:17:00 +0100] [Job 2] banner_page = 0
D [18/Aug/2009:14:17:00 +0100] [Job 2] argv[0]="designjet5500__Q1251A___00306ECA2FB9"
D [18/Aug/2009:14:17:00 +0100] [Job 2] argv[1]="2"
D [18/Aug/2009:14:17:00 +0100] [Job 2] argv[2]="sam"
D [18/Aug/2009:14:17:00 +0100] [Job 2] argv[3]="testprint.ps"
D [18/Aug/2009:14:17:00 +0100] [Job 2] argv[4]="1"
D [18/Aug/2009:14:17:00 +0100] [Job 2] argv[5]="APDInputSlot= pserrorhandler-requested=standard nocollate com.apple.print.PrintSettings.PMColorMatchingMode..n.=0 com.apple.print.JobInfo.PMJobName=testprint.ps APColorMatchingMode=APApplicationColorMatching job-uuid=urn:uuid:b5be6143-9e7f-3cd7-6719-7df9ce42aa47"
D [18/Aug/2009:14:17:00 +0100] [Job 2] argv[6]="/private/var/spool/cups/d00002-001"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[0]="<CFProcessPath>"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[1]="CUPS_CACHEDIR=/private/var/spool/cups/cache"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[2]="CUPS_DATADIR=/usr/share/cups"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[3]="CUPS_DOCROOT=/usr/share/doc/cups"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[4]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[5]="CUPS_REQUESTROOT=/private/var/spool/cups"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[6]="CUPS_SERVERBIN=/usr/libexec/cups"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[7]="CUPS_SERVERROOT=/private/etc/cups"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[8]="CUPS_STATEDIR=/private/var/run/cups"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[9]="PATH=/usr/libexec/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[10]="[email protected]"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[11]="SOFTWARE=CUPS/1.3.8"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[12]="TMPDIR=/private/var/spool/cups/tmp"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[13]="USER=root"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[14]="CUPS_SERVER=/private/var/run/cupsd"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[15]="CUPS_ENCRYPTION=IfRequested"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[16]="IPP_PORT=631"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[17]="CHARSET=utf-8"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[18]="LANG=en_US.UTF8"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[19]="APPLE_LANGUAGE=en-US"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[20]="PPD=/private/etc/cups/ppd/designjet5500__Q1251A___00306ECA2FB9.ppd"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[21]="RIPMAXCACHE=8m"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[22]="CONTENT_TYPE=application/postscript"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[23]="DEVICEURI=mdns://designjet%205500%20%28Q1251A%29%20%2800306ECA2FB9%29._pdl-datastream.tcp.local./?bidi"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[24]="PRINTER=designjet5500__Q1251A___00306ECA2FB9"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[25]="FINALCONTENT_TYPE=printer/designjet_5500__Q1251A___00306ECA2FB9"
I [18/Aug/2009:14:17:00 +0100] [Job 2] Started filter /usr/libexec/cups/filter/pstops (PID 71849)
I [18/Aug/2009:14:17:00 +0100] [Job 2] Started filter /usr/libexec/cups/filter/foomatic-rip (PID 71850)
I [18/Aug/2009:14:17:00 +0100] [Job 2] Started backend /usr/libexec/cups/backend/mdns (PID 71851)
D [18/Aug/2009:14:17:00 +0100] Discarding unused job-state-changed event...
D [18/Aug/2009:14:17:00 +0100] [Job 2] mdns backend exec'ing /usr/libexec/cups/backend/socket to connect to socket://NPICA2FB9.local.:9100/?bidi
D [18/Aug/2009:14:17:02 +0100] [Job 2] Connected to 43.194.241.139:9100 (IPv4)...
D [18/Aug/2009:14:17:02 +0100] [Job 2] backendRunLoop(print_fd=0, device_fd=5, use_bc=1, side_cb=0x765bb388)
D [18/Aug/2009:14:17:02 +0100] Discarding unused printer-state-changed event...
D [18/Aug/2009:14:17:07 +0100] [Job 2] Page = 612x792; 14,34 to 598,778
D [18/Aug/2009:14:17:07 +0100] [Job 2] slow_collate=0, slow_duplex=0, slow_order=0
D [18/Aug/2009:14:17:07 +0100] [Job 2] Before copy_comments - %!PS-Adobe-3.0
D [18/Aug/2009:14:17:07 +0100] [Job 2] %!PS-Adobe-3.0
D [18/Aug/2009:14:17:07 +0100] [Job 2] %%BoundingBox: 0 0 612 792
D [18/Aug/2009:14:17:07 +0100] [Job 2] %%Pages: 1
D [18/Aug/2009:14:17:07 +0100] [Job 2] %%LanguageLevel: 1
D [18/Aug/2009:14:17:07 +0100] [Job 2] %%DocumentData: Clean7Bit
D [18/Aug/2009:14:17:07 +0100] [Job 2] %%DocumentSuppliedResources: procset testprint/1.3
D [18/Aug/2009:14:17:07 +0100] [Job 2] %%DocumentNeededResources: font Helvetica Helvetica-Bold Times-Roman
D [18/Aug/2009:14:17:07 +0100] [Job 2] %%Creator: Michael Sweet, Apple Inc.
D [18/Aug/2009:14:17:07 +0100] [Job 2] %%CreationDate: D:20070606214000+0500
D [18/Aug/2009:14:17:07 +0100] [Job 2] %%Title: Test Page
D [18/Aug/2009:14:17:07 +0100] [Job 2] %%EndComments
D [18/Aug/2009:14:17:07 +0100] [Job 2] Before copy_prolog - %%BeginProlog
D [18/Aug/2009:14:17:07 +0100] [Job 2] Before copy_setup - %%Page: 1 1
D [18/Aug/2009:14:17:07 +0100] [Job 2] Before page loop - %%Page: 1 1
D [18/Aug/2009:14:17:07 +0100] [Job 2] Copying page 1...
D [18/Aug/2009:14:17:07 +0100] [Job 2] pagew = 583.7, pagel = 743.8
D [18/Aug/2009:14:17:07 +0100] [Job 2] bboxx = 0, bboxy = 0, bboxw = 612, bboxl = 792
D [18/Aug/2009:14:17:07 +0100] [Job 2] PageLeft = 14.2, PageRight = 597.8
D [18/Aug/2009:14:17:07 +0100] [Job 2] PageTop = 777.8, PageBottom = 34.0
D [18/Aug/2009:14:17:07 +0100] [Job 2] PageWidth = 612.0, PageLength = 792.0
D [18/Aug/2009:14:17:07 +0100] [Job 2] Wrote 1 pages...
D [18/Aug/2009:14:17:07 +0100] PID 71849 (/usr/libexec/cups/filter/pstops) exited with no errors.
D [18/Aug/2009:14:17:09 +0100] [Job 2] Read 8192 bytes of print data...
D [18/Aug/2009:14:17:09 +0100] [Job 2] Wrote 8192 bytes of print data...
D [18/Aug/2009:14:17:09 +0100] PID 71850 (/usr/libexec/cups/filter/foomatic-rip) exited with no errors.
D [18/Aug/2009:14:17:14 +0100] PID 71851 (/usr/libexec/cups/backend/mdns) exited with no errors.
D [18/Aug/2009:14:17:14 +0100] [Job 2] File 0 is complete.
I [18/Aug/2009:14:17:14 +0100] [Job 2] Completed successfully.
D [18/Aug/2009:14:17:15 +0100] [Job 2] Unloading...

Connection with Advanced - custom JDBC URL fails with some valid JDBC-URLs

Hi,
I am trying to create a connection with a custom JDBC connection string, but SQL*Developer throws the error message:
Status : Failure -Test failed: Required property 'hostname' is not set on the DatabaseProvider my tests are:
<li> with connection via Connection Type set to TNS and a proper alias - it works fine
<li> with connection via Connection Type set to Advanced and exactly the same values from tns in the url: jdbc:oracle:thin:@(DESCRIPTION=(enable=broken)(ADDRESS=(PROTOCOL=tcp)(HOST=172.24.32.113)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=RESTSVP_SITE1))) - it fails with Status : Failure -Test failed: Required property 'hostname' is not set on the DatabaseProvider<li> with JDBC URL set to jdbc:oracle:thin:@172.24.32.113:1521/RESTSVP_SITE1 - it works fine
As my jdbc url is quite close to the example in [url http://docs.oracle.com/cd/E11882_01/java.112/e16548/apxtblsh.htm#CHDBBDDA]Using JDBC with Firewalls maybe someone can help me to fix it?
Martin
Edited by: berx on Oct 12, 2012 11:32 AM - fixed typos

Hi Martin,
1/oci/thick
2/RAC options
3/TNS connection
1/oci/thick
OCI driver has a slightly different set of features than thin:
-try oci/thick (requires Oracle Client, server or instant client) (It requires SQLDeveloper java and .dll, .so libraries to match)Re: SQL developer 3.1 shows error Incompatible version of libocijdbc
jdbc:oracle:oci:@(DESCRIPTION=(enable=broken)(ADDRESS=(PROTOCOL=tcp)(HOST=your_host_name)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=your_service_name)))
2/RAC options
More speculatively:
-Try sid instead of service name (will disable some networking features on that connection), try switching load balancing off.
From: Unable to access RAC from SQL Developer!
In general and especially for RAC database you should use SERVICE_NAME to connect and not SID (because only SERVICE_NAME can use load balancing and failover features):
3/TNS connection
with connection via Connection Type set to TNS and a proper alias - it works fine(Which Connection Type TNS did you use? TNS Connect Identifier = oci/thick, TNS Network alias (can be thin (I should check, might depend on oci/thick checkbox))
Is this issue stopping your work i.e. is this workaround unacceptable?
-Turloch
SQLDeveloper team

Metachain failed with status 'X'.

Similar Messages

Maybe you are looking for