Metadata contains a reference that cannot be resolved:

Also check this:-
https://social.microsoft.com/Forums/en-US/96aece54-081d-40b2-b1c9-f55b55a06a72/metadata-contains-a-reference-that-cannot-be-resolved-crm-2011?forum=crmdevelopment
Regards Faisal

Similar Messages

Palm Pre crazy symptoms: "phone offline", will not charge battery, will not start, error message "an error has occured that cannot be resolved"

This is a long description of a series of problems with my new Palm Pre. You may wish to search the text to find your specific issue(s). There is no solution in my post. Look for possible answers in the responses to come.
I bought my Palm Pre 4 days ago and it arrived 2 days ago. Phone worked great. Last night I plugged in the phone and updated the OS. After completion, I selected "Done" and went to bed.
- First Series of Issues: "Phone Offline", will not charge battery -
In upper lefthand corner of the phone there is the message "phone offline". Although the phone has been charging all night it reads "26% battery". I called the general Sprint tech support number and we tried the following things:
1) Restart phone (press and hold power button, then select "turn off". after power down, press and hold power button to power on.)
2) Reset the phone (several different ways - call tech support so that you do this correctly)
The individual at Sprint then sent me to another tech support person, presumably 2nd tier.
- Second Series of Issues: Error message "an error has occured that cannot be resolved" -
Sprint tech support person #2 also had me restart and reset the phone in a number of ways. In her words "we've tried every palm pre trick I know" and each time the phone was unresponsive. Often we received the error message "phone is offline". We did a full erase and after that the phone would no longer restart. At this point the error message came up saying "an error has occured that cannot be resolved" which referred me to www.palm.com for assistance. I think it's important to note here that this was not the typical error message (black screen with white letters) but rather the blue sky background with a semitransparent box over it with white text.
Sprint tech support person #2 then connected me with Palm support and the dance continued. Again we tried a whole bunch of resetting and restarting and erasing options. Palm support instructed me to go to: www.palm.com/rom to download WebOS Doctor, which I did. I downloaded the file. While that was happening he had me hold the "volume up" button and plug the phone into the charger. This caused a USB symbol to appear on the phone. When the file was complete I received an error message that the file couldn't run. Palm tech support person seemed surprised. I mentioned that I was on a Mac and he said he couldn't help me. He then transferred me to another Palm support person who works with Mac users.
Palms tech support person #2 then informed me that I should have selected the "mac" download option on www.palm.com/rom. I verbally walked her through the whole series of webpages, telling her that it says that you need Windows (version whatever) or Mac (version whatever) but that at no time was there an option to download a different WebOS Doctor for different operating systems. After some more discussion she told me she would have to have someone call me back tomorrow.
- Third Series of Issues: phone stuck on USB symbol -
So at the moment the phone is completely useless. Not fantastic. I booted up the mac in Windows 7 and downloaded WebOS Doc and received the same error. I also ran Windows Vista virtually and received the same error. Later this afternoon I'm heading into work to try the same thing on Windows XP.
In the meantime, I got onto this forum and located a thread that provided a direct link to the necessary file:
palm.cdnetworks.net/staging/rom/webosdoctorp100ewwsprint.jar
After downloading that file, which I realized could totally be a virus, I was able to get WebOS Doc working on my computer. It required that I recharge the phone completely before beginning and now it's on the screen that says "Don't disconnect your phone" and the file is at 3% complete. Only... it's been at 3% complete for almost 30 minutes.
I am hoping that Palm will follow up with me tomorrow, but I'm leaving at 7am on a business trip and would love to have the thing working. Any suggestions are welcome, even if you can just tell me how to get the think disconnected safely before my flight tomorrow. I don't fancy getting through security with my phone wired to my laptop.
Thanks.
Post relates to: Pre p100eww (Sprint)
This question was solved.
View Solution.

Hello and welcome to the forums;
Our phone support is open every day Monday through Sunday, although there are different hours of operation for the weekend. If after a webOS Doctor reset you are still experiencing the same problems, I would likely recommend replacement, either in a local store for your carrier or through our technical support department.
There may be additional technical support offered or suggested over the phone, this would need to be done first before a replacement could be issued.
Hope this helps,
TreoAide

Handling unit 1000001227 contains an item that cannot be assigned

THE HANDLING UNITS ARE CREATED WITH THE BATCH MANAGED MATERIAL HU02.
AT THE TIME OF CREATING DELIVERY,WHEN I GO TO SELECT THE HANDLING UNITS IN EDIT>PACK THE SYSTEM GIVES ME FOLLOWING WARNING,
Items subject to batch handling w/o batch assignment could not be packed
AND AFTER ENTERING THE SYSTEM TAKES ME TO THAT PACKING SCREEN AND WHEN I SELECT MY HANDLING UNIT THE SYSTEM GIVES ME THE FOLLOWING MESSAGE AND DOESN'T SELECT THE HANDLING UNIT,
Handling unit 1000001227 contains an item that cannot be assigned
ALTHOUGH THE SYSTEM SELECT THE HANDLING ONLY WHEN I MENTION THE ALL BATCHES,QUANTITY AND WAREHOUSE OF THE ITEM IN BATCH SPLIT.
ANY ANYONE TELL ME THAT HOW CAN I SELECT THE HANDLING UNITS WITH OUT MENTIONING ITS BATCHES IN THE BATCH SPLIT.
REGARDS:VIJAY KUMAR

Hi Vijay,
Based on the below error Items subject to batch handling w/o batch assignment could not be packed.
I think while creating the delivery check whether the system allocated the correct batch or not. If not created the batch then click on Batch split and Batch determination.
Then from the menu Batch determination -> W/o classification. Then system will show the all batches. Then select the coorect batch and copy the Qty.
Then try to do packing edit - > pack.
I think it will work fine.
Regards,
SK

Help about the phone contain modified softwere that cannot be update

hi i can;t update my phone (j10) give me this erorr the phone contain modified softwere that cannot be update ? help me

You can try to use EMMA to flash software:
http://developer.sonymobile.com/services/flash-tool/use-the-flash-tool-for-xperia-devices/
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Some class that cannot be resolved to a type

Hello, I?m trying to use the[b] itext API for PDF creating from Java.
In order to do this you must include the package .jar in your classpath and import com.logawie.text.* in your java file. All this steps are obviusly, and work correctly, in JAVA, but i?m trying to develope a web application, using JSP.
Usually when I try to import a package from a JAR file that are allocated in the C:\j2sdk1.4.2_12\lib directory it doesn?t work. I solved this problem with some classes including it directly to the src.zip file. But with the itext package it doesn?t work, I don?t know if my solution is too bad, but with another classes it works, but with the itext package it says that all classes references "cannot be resolved to a type".
Anyone can help me? Thanks in advance.

when i try to depooy it then error comes
user cannot be resolved to a type
can any body help me
and tell me about classpath
//UserData.java
package user;
public class UserData {
String username;
String email;
int age;
public void setUsername( String value )
username = value;
public void setEmail( String value )
email = value;
public void setAge( int value )
age = value;
public String getUsername() { return username; }
public String getEmail() { return email; }
public int getAge() { return age; }
//GetName.jsp
<HTML>
<BODY>
<FORM METHOD=POST ACTION="SaveName.jsp">
What's your name? <INPUT TYPE=TEXT NAME=username SIZE=20><BR>
What's your e-mail address? <INPUT TYPE=TEXT NAME=email SIZE=20><BR>
What's your age? <INPUT TYPE=TEXT NAME=age SIZE=4>
<P><INPUT TYPE=SUBMIT>
</FORM>
</BODY>
</HTML>
//NextPage.jsp
<jsp:useBean id="user" class="user.UserData" scope="session"/>
<HTML>
<BODY>
You entered<BR>
Name: <%= user.getUsername() %><BR>
Email: <%= user.getEmail() %><BR>
Age: <%= user.getAge() %><BR>
</BODY>
</HTML>
//SaveName.jsp
<jsp:useBean id="user" class="user.UserData" scope="session"/>
<jsp:setProperty name="user" property="*"/>
<HTML>
<BODY>
Continue<font face="Arial"> </font>
</BODY>
</HTML>

Context binding of property value cannot be resolved. not contain any eleme

I have a binding of a inputelment to a context element. the context can be empty. when it is empty it throws the error only when i have that binding. I thougt its not interesting for an inputfield to have a value or?
Following error occurs: The following error text was processed in the system DBW : Adapter error in &VIEW_ELEMENT_TYPE& "ZPM_PROJ" of view "ZPM_MD_PMON.STARTVIEW": Context binding of property VALUE cannot be resolved: Node STARTVIEW.1.PROJ does not contain any elements

Hi,
The thing is that you're trying to access node which might be from 0 to 1 or n records (cardinality). And at runtime point you have 0 records with 0 elements. That's why you have problem.
There might be something wrong with logic how you trying to display some data in your text fields.
At runtime there is no context element from which system could take values.
Or you have to change parent node cardinality to 1..1 if that meets logic or review your logic.

The item contains one or more busy items that cannot be changed

We have a Windows 2003 file server and we are having issues with Macs retrieving files/folders from it. There is a folder on the Windows share named "dropbin" that UserA has full permissions on. UserB has the following NTFS permissions on the dropbin folder.
Traverse Folder / Execute File Allow
List Folder / Read Data Allow
Create Files / Write Data Allow
Create Folders / Append Data Allow
Write Attributes Allow
Write Extended Attributes Allow
This gives UserB the ability to look inside the dropbin folder and place content in there. This same user cannot delete or pull down anything that a different user (UserC) has put in there. UserA (the person with full permissions) should be able to pull down anything put in there.
This works fine from an XP box if an XP user (UserB) puts content in there UserA from a Mac or a PC can get and manipulate the data. If a Mac user (UserB) puts a file up there (it seems to happen with a .txt file, a .cp file, or a .zip file) UserA from a Mac gets the following error when trying to download the file:
"You may need to enter the name and password for an administrator on this computer to change the item named item.txt"
When you hit continue you get the following error:
"The item item.txt contains one or more busy items that cannot be changed"
If you proceed to enter in the admin credentials, the file doesn't copy down to the local Mac and fails without an error.
A couple of things we noticed....
1. If Mac UserB puts up a Word document or a .dmg file then UserA from a Mac can pull it down fine without errors.
2. On the Windows 2003 server we noticed that for each file we tried to upload it creates a ._ corresponding hidden file. For example, item.txt also has ._item.txt. If we go up on the server and remove the hidden file, Mac UserA can pull down the file fine.
3. We tried zipping the files (or files and folders) locally on Mac UserB's desktop then putting the .zip file up there but since it creates a ._file.zip Mac UserA still can't pull it down.
4. The fix we found for this is to have Mac UserB place the files they want to upload into a folder on the desktop, then upload that folder. When Mac UserA comes by they can pull down that folder's worth of stuff.
We are accessing the Windows 2003 file share by going to the finder and using the "Go" menu and entering in:
smb://servername/sharename
and they use their Windows domain credentials to log in.

We may have figured this out but it requires some more testing. The reason why the file upload creates the ._ files in the dropbin folder when UserB puts content in there is because UserB does not have the "Delete" permission in that folder. My guess is that it creates the ._ file when the file is in transit but then deletes that file after it has completed the transfer (but without the delete permission it couldn't remove the ._ file). What we did was added another user to the NTFS permissions for that folder, we added the built in "CREATOR OWNER" account and gave that user the "Delete" permission, now the ._ files do not appear under there and UserA can come along and manage the uploaded file okay.
Hope this helps someone else out.

Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....

Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....is there some trick I am missing or do I need to make an appointment with a genius...

I have the MacIntosh volume and the Boot Camp partition only. I know that when I installed Lion, I had to go through a whole back-up and recovery of Windows and then re-format the drive.
The tech at the Apple Store had a previous life as a MSCE and was very helpful. I believe he even said that I should not have htis problem with Mountain Lion which is why they gave me the flash with it onboard. I was in the process of starting a new job when I went to Lion, so I have waited to do this next and probably last upgrade to this old MBP since I doubt Apple will support this MBP in Maverick.
I do not have another installation, so that is not an option. I will try to create an external, I have plenty of hard drives around and see if I can get it done that way. It might take me a week or two to get back to it, but I will comment back upon completion of that effort. Thanks for your help....Dave Iverson

TS5168 some of my pictures say that the necessary data reference could not be resolved. help

some of my pictures say that the necessary data reference could not be resolved. help

It means iPhoto can't find the file.
There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

Host reference in workflow cannot be resolved.

Hi,
I am authoring a SNMP MP for my devices and I am finding difficulty in creating Perf View. I have all the discovery working and but in my performance view, I am getting data in micro seconds but I want to display it in milli seconds so I am using:
<DataSource ID="DS" TypeID="NetworkMonitoring!System.NetworkManagement.ComputedPerfProvider.Division">
in my Rule but I am getting following error in Event View and my workflow gets unloaded everytime:
Host reference in workflow "MyCluster.NetworkDevice.ClusterLatency.Rule", running for instance "QTFCE522600663-1" with id:"{82890687-8C36-D008-0CED-329BBBE7091E}" cannot be resolved. Workflow will not be loaded. Management group
"SCOMLAB01"
I have also tried with "System.NetworkManagement.ComputedPerfProvider" but result remains the same. I am referring these links:
http://msdn.microsoft.com/en-us/library/jj130485.aspx
http://msdn.microsoft.com/en-us/library/jj129798.aspx
My rule definition:
<Rule ID="Cluster.NetworkDevice.StoragePoolLatency.Rule" Target=".NetworkDevice.StoragePool" Enabled="true" ConfirmDelivery="false" Remotable="true" Priority="Normal" DiscardLevel="100">
<Category>PerformanceCollection</Category>
<DataSources>
<DataSource ID="DS" TypeID="NetworkMonitoring!System.NetworkManagement.ComputedPerfProvider.Division">
<Interval>300</Interval>
<NoOfRetries>3</NoOfRetries>
<Timeout>500</Timeout>
<SnmpVarBinds>
<SnmpVarBind>
<OID>.1.3.6.1.4.1.41263.7.1.7.$Target/Property[Type='SNL!System.NetworkManagement.LogicalDevice']/Index$</OID>
<Syntax>0</Syntax>
<Value VariantType="8" />
</SnmpVarBind>
</SnmpVarBinds>
<Numerator>
<XPathQuery Type="Double">SnmpVarBinds/SnmpVarBind[OID=".1.3.6.1.4.1.41263.7.1.7.$Target/Property[Type='SNL!System.NetworkManagement.LogicalDevice']/Index$"]/Value</XPathQuery>
</Numerator>
<Denominator>
<Value>1000</Value>
</Denominator>
<DefaultValue>0.0</DefaultValue>
<ObjectName>$Target/Property[Type='.NetworkDevice.StoragePool']/StoragePoolName$</ObjectName>
<CounterName>Storage Pool Latency-$Target/Property[Type="SNL!System.NetworkManagement.LogicalDevice"]/Index$</CounterName>
</DataSource>
</DataSources>
<ConditionDetection ID="CD" TypeID="Perf!System.Performance.OptimizedCollectionFilter">
<Tolerance>10</Tolerance>
<ToleranceType>Percentage</ToleranceType>
<MaximumSampleSeparation>6</MaximumSampleSeparation>
<SamplingPeriodInSeconds>300</SamplingPeriodInSeconds>
</ConditionDetection>
<WriteActions>
<WriteAction ID="CollectToDB" TypeID="SC!Microsoft.SystemCenter.CollectPerformanceData" />
<WriteAction ID="CollectToDW" TypeID="MSDL!Microsoft.SystemCenter.DataWarehouse.PublishPerformanceData" />
</WriteActions>
</Rule>
Any suggestions?
Regards,
Ravi

Hi,
The custom rule created may have issues with a target either a wrong or typo
in the target . Check the blog which talks about the error you are seeing.
http://blogs.msdn.com/b/davidlai/archive/2008/08/27/host-or-property-references.aspx
Regards,
Yan Li
Regards, Yan Li

My ipad new was hang, theres an aplication that cannot be downloaded how to resolve it?

How can I resolve my hang ipad3 there's an aplication that cannot be downloaded?

Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy... Download the App to your computer and then Sync your iPad...

Cannot open project. Just got an error message that says: ' project contained a sequence that coul

Cannot open project. Just got an error message that says: ' project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated witht his sequence type. " how do I navigate this and reopen my project. ( note: I recently transitioned from the 30 day free trial to 'buying in' to the license cloud application; if that has relevance....)

FAQ: Why are some codecs and sequence presets missing from my installation of Premiere Pro?

SAML 2.0 Security Token Reference cannot be resolved

Hi,
I am trying to send a SAML 2.0 token to SAP Portal 7.3 EHP 2 using the sender-vouches confirmation method.
My message is signed by my client application. The signature references 3 parts:
1) a security token reference which in turn points to my SAML assertion (using STR transform)
2) the bdoy (using c14n transform)
3) the timestamp (using c14n transform)
Collecting some WS-Security trace, I can see the following:
Exception : Security Token Reference transform could not resolve token: <yq1:SecurityTokenReference yq2:Id='wssecurity_signature_id_23' xmlns:yq2='http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd' xmlns:yq1='http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd'><yq1:KeyIdentifier ValueType='http://docs.oasis-open.org/wss/oasis-wss-saml-token-profile-1.1#SAMLID'>Assertion-uuida9c3e36a-0131-11fd-bfea-f4ca184fc662</yq1:KeyIdentifier></yq1:SecurityTokenReference>
java.lang.Exception
at com.sap.exception.BaseExceptionInfo.traceAutomatically(BaseExceptionInfo.java:1230)
at com.sap.exception.BaseExceptionInfo.<init>(BaseExceptionInfo.java:147)
at com.sap.exception.io.SAPIOException.<init>(SAPIOException.java:63)
at com.sap.engine.services.wssec.wsse.STRCanonicalizationWriter.doSTRTransform(STRCanonicalizationWriter.java:228)
at com.sap.engine.services.wssec.wsse.STRCanonicalizationWriter.leave(STRCanonicalizationWriter.java:152)
at com.sap.engine.services.wssec.xmlsecurity.signature.verification.ReferenceDispatcherReader.handleCode(ReferenceDispatcherReader.java:315)
at com.sap.engine.services.wssec.xmlsecurity.signature.verification.ReferenceDispatcherReader.next(ReferenceDispatcherReader.java:186)
at com.sap.engine.services.wssec.xmlsecurity.signature.verification.VerifyTokenReaderImpl.next(VerifyTokenReaderImpl.java:501)
at com.sap.engine.services.wssec.wsse.WSSecurityContext.init(WSSecurityContext.java:429)
Assertion-uuida9c3e36a-0131-11fd-bfea-f4ca184fc662 is the ID of my SAML assertion.
Using the same configuration in my client app, but sending a SAML 1.1 token passes this step.
Is there any trace I can enable to further debug this issue?
Has anybody encountered the same issue before?
Thanks
Jens

Hi Jens,
Have you tried collecting traces using SAP Note [Troubleshooting Wizard|https://service.sap.com/sap/support/notes/1332726] with incident "WebServices Security"? You may find more information.
Best regards,
Desislava

I cannot access my videos anymore in Iphoto. ' A necessary data reference could not be resolved '

Hi, I can no longer access the videos in my iphoto library. It still shows the screenshot and the duration of the video, but when i open, i get the following message ' A necessary data reference could not be resolved'. What can i do ?
Tried also to export, but to no avail.
Thx for suggestions,
Oscar

With the amount of information you've provided it's impossible to offer a solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
Did you apply any updates or upgrades to iPhoto or the system between the time you last were able to view the video files and now?
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?

Getting error message "invalid formaula that cannot be compiled"

Hi,
I have installed SAP Crystal Report Viewer 2008, when tries to open output file that has RPT extension, getting error message "this report contains invalid Crystal Reports formulas that cannot be compile".
It seems it requires some DLL files that we already have but we dont know where to place it on SAP Crystal Report Viewer program files folder.
Please help me in resolving this error.
Thank you in advance.
Regards,
Manish Gupta

Manish,
If the report contains formulae that reference UFLs then it will Not work in the CR Viewer.
Following are the kind of reports that don't work with the free (standalone) CR Viewer per this SAP Note:
1. Reports that have no saved data, unless they are being accessed online from BusinessObjects Enterprise and you have the appropriate rights.
2. Reports that use Business Views as a data source.
3. Reports that use universes as a data source. (Static instances of reports that use universes will open if these reports are downloaded from BusinessObjects Enterprise.)
4. Reports that use Crystal Dictionaries as a data source.
5. Reports that use Crystal Queries as a data source.
6. Reports that depend on UFLs
7. Reports that are successfully using "Perform Grouping on Server". (That is, the generated report SQL contains a "group by" clause.)
If you want UFLs to work with the Viewer, please have a look at the 3rd-party Crystal report viewers listed at: http://www.kenhamady.com/bookmarks.html
-Abhilash

Metadata contains a reference that cannot be resolved:

Similar Messages

Maybe you are looking for