Metadata for LOIPRO01 missing

Hi,
When i am trying to send process order IDOC's to xMII system i am getting the following error in RFC log.
UUID: ab_rfccheck_uuid compare uuid's {48ADD4D3-C48E-07F5-E100-000097A31462}
The meta data for the IDoc type "LOIPRO01" is unavailable.
Can any one tell me if this is because of some missing customization in SAP ? If so, how to create meta data for LOIPRO01 ?
Thanks,
Srini.
Edited by: Srini Rapaka on Aug 22, 2008 11:24 AM
However, if i check the status of IDOC using WE05 it is '03' which means successfully dispatched to the receiver system. But i cant see the IDOC in the receiver system .

Hi
See the below thread it was discussed on the same issue
[LOIPRO01 missing|xMII - iDoc The meta data for the IDoc type "LOIPRO01" is unavailable.");
[Stater Guide|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b7c79bd4-0a01-0010-4caf-bfb68ab98517]
Regards
Pavan

Similar Messages

Read metadata for a file without Photoshop or Bridge

Hi
Suppose I have a file in desktop called "test.jpg". So I create this variable:
var myFile = new File ("~/Desktop/test.jpg");
This file has some keywords and instructions I need to read. And if the reading process finds the correct keyword, then it copies the file to the appropriated folder. Well, in resume, I could do everything directlly using #target estoolkit. I´d not like to involve (opening) Photoshop or Bridge.
Is it possible to read the metadata of a file without targetting Bridge or Photoshop? Reading the reference I did not find any method or property for this, expect for the metadata library. BUT
If I try to load the metadata library using:
if (ExternalObject.AdobeXMPScript == undefined) {
ExternalObject.AdobeXMPScript = new ExternalObject('lib:AdobeXMPScript');
then it sure will returns an error file or folder does not exists..
Any idea how I could proceed to load this library and read the metadata of a file directlly?
Thank you very much
Best Regards
Gustavo.

Hi friends
Thank you very much for your inputs. Muppet....what do you mean when you write The modified date gets bumped and can be a PITA? What means "PITA"?
So, if it´s impossible to invoke [directly] the default library without targetting Bridge or Photoshop...I´ll simplify the things and use Bridge to house the script. No problem.
So, look at what I´m doing:
#target bridge
if (ExternalObject.AdobeXMPScript == undefined) {
ExternalObject.AdobeXMPScript = new ExternalObject('lib:AdobeXMPScript');
var test = new File ("~/Desktop/Test.jpg");
var xmp = test.metadata;
alert(xmp);
...But, the alert in Adobe Bridge is returning nothing (""). And I know this image exists and it has metadata.
I remember to use metadata for reading the currently selected image in Content panel of Bridge (and it worked), but never tried direrctly declaring a file and reading this way.
Am I missing anything obvious?
Thank you very much
Gustavo.
Message was edited by: Gustavo Del Vechio

GPS Metadata for Managed Images Bug

Alright this is really dumb. Aperture strips the GPS metadata for managed images on a version export, but does not for referenced files.
It just took me 4 hours to figure that out, ug. Metadata is sacred! Always preserve it.

My Aperture library uses managed masters.
I too discovered that if I performed *version exports* of geotagged masters the exported images did not retain the GPS data. The problem was the same regardless of whether the masters were .jpgs or RAW files. (Geotagging was performed with Maperture and Maperture Pro; the bug symptoms are the same regardless of which tool was used.)
Additionally, I discovered that if I performed *master exports*, then not only were the geotags retained in the exported files, but that +reimporting those same exports resulted in new masters whose versions would subsequently retain their geotags on version export+.
synonym wrote:
If you Relocate Masters... BEFORE you add GPS metadata using Maperture you don't lose any IPTC metadata. If you then Consolidate Masters... you can then apply GPS metadata to these images within your Aperture library and you will not lose IPTC or the GPS data on exporting the versions.
If I'm reading this correctly it sounds like you can "scrub" your library of the problem by relocating masters and then consolidating them again, and that subsequently applied geotags (and by inference IPTC metadata) will be retained on new version exports. Did I get that right?
However if you already have loads of images in your Aperture library that you have added GPS data to with Maperture and you also have loads of IPTC metadata on them and adjustments what do you do?
I did a backup of the library at this point to a vault. I then restored the vault and GPS data and IPTC metadata was all retained and was also all retained on exporting versions!
And if I'm reading the last sentence of your post correctly, it seems like the consistent behavior between our two situations is that if *images are brought into the library with geotags already in them* - in your case by library restoration and in my case by re-importation of previously geotagged masters - *then the geotags will be retained on subsequent master and version exports*.
Is that a valid conclusion to draw? If so, it sounds like I could workaround the problem of geotags missing from my version exports by either A) relocating and then consolidating my masters, or B) by the three-step process of:
1) geotagging my images,
2) updating the vault, and then
3) restoring my library from the vault.

Editing SharePoint metadata for Visio files

When I am editing Visio files metadata in SharePoint 2007, it opens a web dialog page to enter the metadata for the SharePoint library, but, when a column field is type: choice-drop down menu. It doesn't take current metadata for those fields, so, the current
metadata has to be chosen again. Is there any technical document that explains this?
It also takes too much time to open Visio templates in SharePoint, it doesn't happen with Visio standard files, the solution was to uncheck automatically detect settings, but is there any other solution?
I am using Windows 7, Office 2010, Visio 2010 and Internet Explorer v8.

Hi Javi,
thank for the reply,
after some discussion, trial and research, seems there is a process that is missed.
as i know, when we check out the document the metadata itself cannot be edited. so then while we already saved the metadata, as by design the web file properties will be out and the metadata needs to be re-input again, as they will not be passed on check
in process.
so, this behavior is most likely by design, if you need to customize this then i think you need to open a ticket to us.
"By default you cannot edit MetaData in case the document is checked-out - which is by design and acceptable. But if you open up a checked-out document from a WSS doclib and edit it in Word and click File > Save As - in order to save the document back
into WSS - you are prompted for typing in MetaData (Web File Properties). In case you change or fill out some of them and in order to see them reflected on the WSS page you have to check-in the document again - which you will be ask for to do while closing
the office application btw.
If you keep the document checked-out the metadata are not reflected on the WSS page and are hidden (stored somewhere...) to the user. Users are confused because they cannot see the Metadata they typed in until they check-in the document. This wasn´t necassary
with SPS2001 where we could see the changes we made to metadata immediately on the dashboard. And as Joerg also mentioned bad user experience - we create unnecessary versions as we have to check-in the document which creates an additional version.
Solution here would be: either to reflect the changed MetaData immediately without the need to check-in the document or to avoid the Web File Properties Dialog box while performing a Save As of a checked-out document. "
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

BCExeption: The IDOC metadata for null is not available in SID

<h3>Hello Guys,</h3>
we need some information about the error message:
com.wm.pkg.sap.BCExeption: The IDOC metadata for null is not available in <SID>
We use a Business Connector 4.8 and the backend is an ECC 6.0, we have an inbound xml scenario with FTP.
We pick up the ORDRSP from the vendors ftp-server and we would like to drop it to our backend system.
We can read the xml file into a string, but not send to the backend system, we use following steps:
- bytesToString
- stringToDocument
- documentToRecord
- recordToIDOC
- lockSession
- createTID
so far works perfekt
- sendIDoc
- releaseSession
On the step "sendIDoc" we see the described error message, but what is the message from the message?
Any Ideas?
Thank you and regards,
Michael

Hello Michal,
thank you for your quick answer!
In my opinion, i don't need any input for this service, because we pick up all data from the vendors ftp - server in a definied time interval.
All needed fields are available in the xml file. In the result tab is the IDocList filled correct, but no sending to the backend system because the error is displayed.
Is it a problem with my concept?
Regards,
Michael

Exception on creation of service metadata for WSDL URL

Hi expert,
im consuming a wsdl file in my wdj dc , and on trying to execute im getting exception as follows .
WsdlApp--com.sap.tc.webdynpro.model.webservice.exception.WSModelRuntimeException: Exception on creation of service metadata for WSDL URL 'E:\***********\MIOS_*********_********.wsdl' and service factory configuration 'null'
at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:422)
at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.readOperationsFromWSDL(WSModelInfo.java:372)
at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.importMetadataInternal(WSModelInfo.java:342)
at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.importMetadata(WSModelInfo.java:326)
at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo$Cache.getModelInfo(WSModelInfo.java:199)
at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getModelInfoFromCacheOrCreate(WSModelInfo.java:1035)
at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getModelInfoFromCacheOrCreate(WSModelInfo.java:248)
at com.sap.tc.webdynpro.model.webservice.gci.WSTypedModel.<init>(WSTypedModel.java:41)
at com.*****.wsdlwdj.batch.****************Batch.<init>(******************Batch.java:51)
at com.*****.wsdlwdj.comp.*************Component.test**********Auth(************Component.java:266)
at com.*****.wsdlwdj.comp.wdp.Internal****Component.test****Auth(Internal********Component.java:331)
at com.*****.wsdlwdj.comp.WsdlView.wdDoInit(WsdlView.java:97)
at com.*****.wsdlwdj.comp.wdp.InternalWsdlView.wdDoInit(InternalWsdlView.java:129)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:445)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.doOpen(WebDynproWindow.java:295)
at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.show(ApplicationWindow.java:182)
at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.open(ApplicationWindow.java:177)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:364)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:783)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:303)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:185)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.setSpnegoParameter(RequestManager.java:963)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:157)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1064)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.WebserviceClientException: GenericServiceFactory initialization problem. Could not load web service model. See nested exception for details.
at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DGenericServiceImpl.generateProxyFiles(DGenericServiceImpl.java:158)
at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DGenericServiceImpl.<init>(DGenericServiceImpl.java:56)
at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.createService(GenericServiceFactory.java:92)
at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.createService(GenericServiceFactory.java:114)
at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:420)
... 55 more
Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.ProxyGeneratorException: Proxy Generator Error. Problem with WSDL file parsing. See nested message.
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.ProxyGenerator.generateProxy(ProxyGenerator.java:182)
at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DGenericServiceImpl.generateProxyFiles(DGenericServiceImpl.java:155)
... 59 more
Caused by: com.sap.engine.lib.xml.util.NestedException: IO Exception occurred while parsing file:/usr/sap/*****/JC**/j2ee/cluster/server1/E:/****/FolderName/WSDLNAME.wsdl (No such file or directory) -> java.io.FileNotFoundException: /usr/sap/***/JC**/j2ee/cluster/server1/E:/WSDL FILE/FolderName/wsdlname.wsdl (No such file or directory)
at com.sap.engine.services.webservices.wsdl.WSDLDOMLoader.loadDOMDocument(WSDLDOMLoader.java:1039)
at com.sap.engine.services.webservices.wsdl.WSDLDOMLoader.loadWSDLDocument(WSDLDOMLoader.java:1126)
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.ProxyGenerator.generateProxy(ProxyGenerator.java:178)
... 60 more
Caused by: java.io.FileNotFoundException: /usr/sap/***/JC**/j2ee/cluster/server1/E:/WSDL FILE/FolderName/wsdlname.wsdl (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at java.io.FileInputStream.<init>(FileInputStream.java:66)
at sun.net.www.protocol.file.FileURLConnection.connect(FileURLConnection.java:69)
at sun.net.www.protocol.file.FileURLConnection.getInputStream(FileURLConnection.java:156)
at java.net.URL.openStream(URL.java:913)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:201)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:263)
at com.sap.engine.lib.xml.parser.Parser.parse_DTDValidation(Parser.java:260)
at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:271)
at com.sap.engine.lib.xml.parser.DOMParser.parse(DOMParser.java:101)
at com.sap.engine.lib.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:127)
at com.sap.engine.services.webservices.wsdl.WSDLDOMLoader.loadDOMDocument(WSDLDOMLoader.java:1023)
... 62 more
Regards
Govardan

im using 7.01 and here we have options to use No Logical Destinations , but now i created destinations at visual admin at Server>Services>Web Service Security>WebService Clients>Sap.com-->Dynamic WS Proxies., as WS_METADATA_DEST and WS_MODELDATA_DEST and have filled in other details too like url , user name , password etc
now im getting another error like as shown below please help
com.****.wsdlwdj.applicaiton.WsdlApp
[EXCEPTION]
com.sap.tc.webdynpro.model.webservice.exception.WSModelRuntimeException: Exception on creation of service metadata for WS metadata destination 'WS_METADATA_DEST' and WS interface '{http://****.com/****}MIOS_Matrix***********'. One possible reason is that the metadata destination 'WS_METADATA_DEST' has not been properly configured; check configuration.
at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:440)
at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.readOperationsFromWSDL(WSModelInfo.java:372)
at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.importMetadataInternal(WSModelInfo.java:342)
at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.importMetadata(WSModelInfo.java:326)
at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo$Cache.getModelInfo(WSModelInfo.java:199)
at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getModelInfoFromCacheOrCreate(WSModelInfo.java:1035)
at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getModelInfoFromCacheOrCreate(WSModelInfo.java:248)
at com.sap.tc.webdynpro.model.webservice.gci.WSTypedModel.<init>(WSTypedModel.java:41)
at com.****.wsdlwdj.model.test.TestModel.<init>(TestModel.java:51)
at com.****.wsdlwdj.comp.VcWsdlComponent.matrixAuthExecut(VcWsdlComponent.java:448)
at com.****.wsdlwdj.comp.wdp.InternalVcWsdlComponent.matrixAuthExecut(InternalVcWsdlComponent.java:280)
at com.****.wsdlwdj.comp.VcWsdlComponent.wdDoInit(VcWsdlComponent.java:132)
at com.****.wsdlwdj.comp.wdp.InternalVcWsdlComponent.wdDoInit(InternalVcWsdlComponent.java:225)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:783)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:303)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:185)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.setSpnegoParameter(RequestManager.java:963)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:157)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1064)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Caused by: com.sap.engine.services.webservices.espbase.discovery.BaseIOException: Invalid Response Code 500 while accessing URL: http://devpid:8000/sap/xi/engine?type=entry&version=3.0&Sender.Service=BS_****_PORTAL&Interface=http%3A%2F%2F****.com%2Fbank_report%5EMIOS_Authorizers_List_Portal&sap-user=xi_portal&sap-password=****1234. Response Message: Empty HTTP request received. Content Type: text/xml. Body Content: <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Header>
</SOAP:Header>
<SOAP:Body>
<SOAP:Fault xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"><faultcode>SOAP:Client</faultcode><faultstring>Empty HTTP request received</faultstring><faultactor>http://sap.com/xi/XI/Message/30</faultactor><detail><SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Category>XIProtocol</SAP:Category><SAP:Code area="MESSAGE">EMPTY_HTTP_REQUEST_RECEIVED</SAP:Code><SAP:P1/><SAP:P2/><SAP:P3/><SAP:P4/><SAP:AdditionalText/><SAP:ApplicationFaultMessage namespace=""/><SAP:Stack>Empty HTTP query received; message processing not possible
</SAP:Stack></SAP:Error></detail></SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>
at com.sap.engine.services.webservices.server.management.discovery.DestinationsResolver.resolveURL(DestinationsResolver.java:246)
at com.sap.engine.services.webservices.server.management.discovery.DestinationsResolver.resolveEntity(DestinationsResolver.java:130)
at com.sap.engine.services.webservices.espbase.query.WSQueryImpl.initialize(WSQueryImpl.java:184)
at com.sap.engine.services.webservices.espbase.query.WSQueryImpl.findWSInterfaces(WSQueryImpl.java:151)
at com.sap.engine.services.webservices.server.management.discovery.ServiceDiscoveryImpl.getWSDLUrl(ServiceDiscoveryImpl.java:71)
at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.createService(GenericServiceFactory.java:134)
at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:429)
... 49 more

Exception on creation of service metadata for WSDL

trying to access webservice (generated on Oracle applic. Server) as Adaptive WebServiceModel i get the following error:
Exception on creation of service metadata for WSDL
Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.WebserviceClientException: GenericServiceFactory
Initialization problem. Could not load web service model. See nested exception for details.
     at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DGenericServiceImpl.generateProxyFiles(DGenericServiceImpl.java:150)
     at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DGenericServiceImpl.<init>(DGenericServiceImpl.java:50)
     at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.createService(GenericServiceFactory.java:88)
     at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:412)
     ... 53 more
Caused by: java.lang.UnsupportedOperationException: Type {http://schemas.xmlsoap.org/soap/encoding/}Array is not supported!
     at com.sap.engine.services.webservices.espbase.client.dynamic.types.impl.MetadataLoader.loadMetadata(MetadataLoader.java:129)
So, the code in WSDL is like:
targetNamespace="http://com.rwe.lis.webservices/IWSFidLis.xsd"
         xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns="http://www.w3.org/2001/XMLSchema">
<complexType name="ArrayOfcom_rwe_lis_model_Flurstueck" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
            <complexContent>
               <restriction base="SOAP-ENC:Array">
                  <attribute ref="SOAP-ENC:arrayType" wsdl:arrayType="ns1:com_rwe_lis_model_Flurstueck[]"/>
               </restriction>
            </complexContent>
         </complexType>
generated by JDeveloper on Ora Server.
So - how to get access to this WebService?!?
Bernhard

Hi,
   The use of SOAP-ENC:Array is not supported in NW because it is not WS-I compliant. For a possible solution check [this|Re: unknown namespace error when generating a client proxy; link.
Regards,
Satyajit

Exception on creation of service metadata for WS metadata destination

Hi,
I have imported a webservice from the backend to the model in webdynpro and i have also configured the destination for the metadata in the CE server but when i execute it its giving me error as
Exceptioncom.sap.tc.webdynpro.model.webservice.exception.WSModelRuntimeException: Exception on creation of service metadata for WS metadata destination FLIGHT_GETLIST and WS interface ZBapi_Flight_Getlist. One possible reason is that the metadata destination FLIGHT_GETLIST has not been properly configured; check configuration.
and during deployment i am getting the following warning
local/SampleFlightList : References Test: There are no matching deploy time references (described in META-INF/SAP_MANIFEST.MF) for the following runtime references [sap.com/tcwdapi, sap.com/tcwdwslib~api] (described in the META-INF/application-j2ee-engine.xml)., file: SampleFlightList.ear, column 0, line 0, severity: warning
can any one please help me to solve this issue.
Thanks&Regards,
Hamsa Shree

Hi Hamsa,
Did you also create and configure an "Execution Destination"?
You can test the Metadata destination configuration on Web Service Navigator.
On the web service navigator (http://hostname:portnumber/wsnavigator) search in the metatda destination you have created for the service you imported in web dynpro as a model. If you can find it there test it on the ws navigator.
Best regards,
Yasar

Getting metadata for RFCs using RFC SDK (with position of parameters)

Hi!
I'm currently using the RFC SDK Function "RfcGetFunctionInfoAsTable" to retrieve metadata for RFCs from SAP. What i see is that the "Position" field in the RFC_FIELDS_U structure contains arbitrary values, and so I am not able to determine what is the actual ordering of the parameters.
What can I do to determine the exact ordering of the parameters of an RFC? (ordering as in - I want to obtain the parameters in the same order as they appear in SAP GUI).
Thanks,
Mustansir

Hi,
I think you can use the code similar to the one below...
some of the things not covered in this are
1. all types for which   CALL FUNCTION 'RFC_GET_NAMETAB' is not returning result, you can call CALL FUNCTION 'RFC_GET_STRUCTURE_DEFINITION' directly. I have not covered that in this code. Hope this is helps in resolving your issue.
Also, the code is not optimized. So there is some scope for optimization of this code.
REPORT ZTEST_GET_SREUCTURE.
DATA : PARAMS     type table of     RFC_FUNINT,
      ls_params like line of params.
data: NAMETAB     type table of     X031L,
      ls_NAMETAB like line of NAMETAB.
data: FIELDS type table of RFC_FIELDS,
      ls_fields like line of fields.
CALL FUNCTION 'RFC_GET_FUNCTION_INTERFACE'
EXPORTING
    FUNCNAME                      = 'fm_test_fm'
TABLES
    PARAMS                        = PARAMS
IF SY-SUBRC <> 0.
ENDIF.
loop at params into ls_params.
CALL FUNCTION 'RFC_GET_NAMETAB'
    EXPORTING
      TABNAME                     = LS_PARAMS-TABNAME
    TABLES
      NAMETAB                     = NAMETAB
IF SY-SUBRC <> 0.
ENDIF.
loop at NAMETAB into ls_NAMETAB.
    CALL FUNCTION 'RFC_GET_STRUCTURE_DEFINITION'
EXPORTING
    TABNAME                     = LS_NAMETAB-ROLLNAME
TABLES
    FIELDS                      = FIELDS
    loop at fields into ls_fields.
      write: ls_fields-FIELDNAME.
    endloop.
endloop.
endloop.

Is there a workaround for the missing global track chords?

Is there a workaround for the missing global track chords? i.e. will Apple loops follow the chord progression in a track?

I found sort of a work around. I still have Logic Pro 9. It turns out that if you go into global tracks, analyze the chords then go back to logic pro x the chord progression is preserved. So the information is preserved there just seems no way to create it in X.

Exporting Metadate for multiple images

Hi, I can't find a way of easily exporting the metadata for a number of images into a csv file. The "Export Metadata" function in Aperture 1.5 only exports the file name and the keywords, with a number of blank columns, and there are no column headings for useful information like shutter speed and aperture!
I've looked at tools like "exiftool" but they are quite difficult to run and seem to only do one image at a time. I also tried using Automator to extract metadata, but couldn't make it work
It would be very useful if I could (a) enter comments in a metadata field and (b) extract technical metadata to a csv file for a number of images
any suggestions welcomed!
Richard

You should be able to do it using AppleScript. It is not straightforward, unfortunately, but the information seems to be there.
http://homepage.mac.com/jlarson7/metadata/index.html

HT1926 I keep getting the following message after attempting to download and install the latest update for iTunes: missing MSVCR80.dll. error 7 (windows error 126)

I keep getting the following message after attempting to download and install the latest update for iTunes: missing MSVCR80.dll. error 7 (windows error 126). Anyone else having this issue? How do I get iTunes back in working order?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Batch Listing Metadata for Offline Files

Hello all -
I'm using Premiere CC 2014 on OSX. I'm trying to do a batch list export of the metadata for a few dozen offline clips in my project.
Here are the details:
I need the filenames and video ins and outs (NOT the media start and end) for all of my media files to put in a spreadsheet for archival purposes. I don't actually have access to the media itself - just to the project file.
When I do a batch export by highlighting all of the files and going to File>Export>Batch List, the only three columns that export are the filename and the media start and end. I'm hoping to get an export with all of the columns of metadata so that I can narrow it down to just the data I need. Basically, this is the info that I want to be able to put in a spreadsheet:
And this is what I'm getting when I do the batch list export:
Does anyone know if this is possible?
Thanks!

Welcome to Apple Discussions:
You might consider
mdls
in a terminal.
If this is a server-specific issue, you might post in the server forum here:
http://discussions.apple.com/category.jspa?categoryID=236

FatalInternalException The metadata for type "XYZ" did not come from a file,.....

Hy !
Did KODO have Problems if there is a mix of jdo metadata files in
build.dir and in external jar's while registering a Schema with the
MappingToolTask ?
We extracting all *.jdo files from additional jars to a metadata dir and
also copying all *.jdo files from the current build.dir, because KODO
only supports a single Fileset for the Metadatafiles.
The Ant Schema Task looks like:
<target name="schema-create-kodo" depends="init-kodo-schematool">
     <echo message="Schema Create for KODO"/>
     <taskdef name="kodo-schematool"
          classname="kodo.jdbc.ant.MappingToolTask"
          classpathRef="jdo.schematool.class.path"/>
     <kodo-schematool action="refresh">
     <config propertiesFile="${zeus.persistence.jdo.properties}"/>
     <fileset dir="${jdo.metadata.dir}">
          <include name="**/*.jdo" />
     </fileset>
     <classpath>
          <pathelement path="${compile.project.class.path}"/>
     </classpath>
     </kodo-schematool>
</target>
jdo.schematool.class.path: is the Path for the KODO Schematool
zeus.persistence.jdo.properties: ist the kodo.properties file
jdo.metadata.dir: is the dir with all metadatafiles
compile.project.class.path: is the classpath including a build.dir with
class files + metadatfiles and differnet additional jar files containing
also enhanced classes with corresponding metadata files
and that fails with:
[kodo-schematool] kodo.util.FatalInternalException: The metadata for
type "class com.wuerth.phoenix.bcserver.base.versan
t.PCapacityStruct" did not come from a file, and therefore we cannot
determine where to place the corresponding mapping
information. If you are using metadata from a jar or other resource,
you should use one of the other available mapping
factories.
com.wuerth.phoenix.bcserver.base.versant.PCapacityStruct comes from a
jar which also contains a metadatafile.
We are wondering because if we exlicit give a different metadata file
via a fileset the Schematool should ignore the other Metadata files
inside the jar + build.dir !?
mfg
Christian

The only Apple computers that have a Mag Safe connector are MacBook laptops (MacBook, MacBook Pro and MacBook Air).
The Mac mini 2010 and 2011 models have a standard power connector, I believe it is called an IEC C7 connector. You can see a picture of the back of the Mac mini here http://www.apple.com/macmini/design.html
Older Mac mini models prior to 2010 have a proprietary connector. While the following page is for a very old PowerPC Mac mini the connector is the same on early Intel Mac mini models as well. See http://support.apple.com/kb/HT3019

How can I read out metadata for captions from a Canon photo

I have to tried to find an answer via Adobe and Google. Still not able to figure out on how to read out XMP metadata for captions out of my photos. Checking the XMP data in InDesign shows info on Camera Make, Exposure etc. But if I use metadata fields from "Caption Setup" like "Camera" the caption shows <No data from link>. Fields where the XMP field name matches (e.g. "Lens") are ok. I need following fields for the caption: Camera Make, Exposure (aperture and speed) and ISO.

Lets keep it simple then.
If I take my utf file generated and open and view it in notepad I can see the accented characters. But if I open it in Wordpad , the accented characetrs are corrupted.
If I then save the file specifiying type Ascii, then the characters are written out correctly.
What I want to do is to be able to write out the file in ascii format without having to open it in utf-mode and then having to save it in ascii.
Ie I want the file to be opened in ascii format
All the characters to be written in Ascii format
But the source is still a unicode database.
I have gone through using convert and characters get lost. In fact, at this stage, I'm not sure its possible to do What I need to do.
Remember I am using an 8 bit character set which is why I have values above 127.
So basically if you take the word 'Annulé'
if I view it in wordpad it displays as
AnnulÃ©
But if I view it in notepad it displays as
'Annulé' which is because notepad detects that the file has a utf-8 character in it.
When I save it as type ascii I can then open it correctly in wordpad.
So I basically want to open this file in Wordpad and have it display Annulé rather than the garbled characters,
without having to go through the process of opening and saving the file as type ansi.

Metadata for LOIPRO01 missing

Similar Messages

Maybe you are looking for