Metadata from Onlocation not showing up in Bridge

This might be a question better suited to the Bridge forum, but I've posted there with no reply.   I want my onLocation 'comment' and 'description' metadata to be viewable in Bridge, in one of the file columns.    I realize it is visible in the 'metadata panel', but I have to search 1000's of files based on their metadata content, and I want to put that next to the filename in bridge instead of in its own panel... if that makes any sense.
Thx in advance,
David

Go to Tools and delete cache for the folder in question.

Similar Messages

  • Shot mark metadata from C300 not showing up

    I would love to see my "shot marks" that I set while recording with the Canon C300 show up on the clips in the timeline.  Is this possible?  Premiere Pro does not seem to recognize this data.  It does recognize the "Good Take" data but not the shot marks within clips.  Am I missing something here?

    Just out of curiousity, (I have an XF305 and 105). If you open them in the Canon XF Utility, can you see them in that? If so, then it sounds like a bug in Premiere. The reason I ask the question in the post above, is that there are two ways to export in the utility. One is to copy the whole card, structure and all. The second is to choose "export to MXF" which strips out the folder structure, and I believe, the markers you set in camera. (this added for the sake of future readers of this post). I find that exporting to MXF is much more useful in viewing the files when editing in Pr. I never use markers in camera though. Let us know what you find out if in fact it is a bug, and I'll also check today with my 305.

  • Contacts from 2010 not showing info in 2013

    I recently upgraded from 2010 to 2013.  When the contacts moved over i cannot find all of the information like anniversary date that was in the details tab of 2010.  Is there an icon or setting that i am missing to see all of this previous information?

    Hi
    As per the information and details provided by you, Contacts from 2010 not showing info in 2013, then please follow these steps: -
    After switch from Outlook 2010 to 2013, simply press
    CTRL+3 to see an overview of all your Contacts folders. If the folder is there and holds your contacts, then either the folder has not been set as an
    Outlook Address Book or Outlook Address Book Service is broken in your mail profile.
    If the contacts are not in the contact folder, then you either forgot to select the folder when creating an export, or didn’t select the folder when importing the
    PST-File. You can take a fresh copy of your backup or the pst-file that you imported from.
    Then connect to the pst-file in Outlook via:
    File > Open > Open Outlook Data File
    Now, check the contacts folder again. If you did not find your Contacts in that pst-file, you can select them all
    (CTRL+A) and move them (CTRL+SHIFT+V) or copy them
    (CTRL+SHIFT+Y) to your main contact folder.
    I hope this information will be helpful for you.
    Thanks and regards
    Shweta@G 

  • Importing songs from CDs - not showing up in my Library

    I am aving trouble importing songs from CDs.  I completed the process as instructed - using the "import this CD" button (I have done this many times successfully).
    The import process ran OK.  When the Import process completed, I looked in my music Library and the songs were not there.
    I repeated the process - same result.  Nothing in my music library.
    What should I do?

    Re: [iPod classic] - Re: Importing songs from CDs - not showing up in my Library
    Thu, Feb 09, 2012 08:01 PM
    When I load the CD, iTunes recognizes it and asks me if I want to Import the CD.
    When I click on "Import CD", the song titles are retreived and show up.  The iTunes bar at the top of the screen shows "Importing track 1" or "Importing  the song by title".  Each song is imported, and I can see each song being impotrted via the iTunes bar at the top of the screen.  iTunes shows that the CD has been imported, and the system dings when the import is done.
    This is exactly the same as every other time I've imported CDs.  The only difference is that the songs do not show up in the library.
    Thanks

  • White Balance Metadata not showing in Adobe Bridge CS6

    Hi there, I am running Bridge CS6 on a Mac, and use Canon 5D and 5DMark 111 cameras. I have an issue with Bridge which I can not seem to figure out. Whether I shoot Raw or JPG and I am trying to do some testing for white balance, once I open the images in Bridge, in the little icon panel just below the folders/favourites panel etc I can see the f stop info, speed, metering , ISO etc, but the only icons I get for WB are if use auto - then I see AUTO.  But when I do a manual WB like 'cloudy', 'tungsten', or 'shade' etc all I get are the symbols for 'Custom" or "Manual".  How do I get the actual symbols for what type of WB i've chosen to show up? 
    I have purged the Cache - both in the individual folder and the overall Cache in preferences.  I have checked that all the boxes are ticked in the preferences panel for the Metadata.  So not sure what else to do.
    Cheers D

    Ok thanks for that, at least I wont be chasing my tail.
    I did install the DNG converter 8.3 but I still NEF files as a NEF icon. Any clues to what I may not be doing right there?

  • Cannot get Sample Metadata UI Extensions to Show in Adobe Bridge

    In the Adobe XMP Metadata UI Developer's Guide it shows:
    Viewing the sample panels
    To see the results of these definitions in an Adobe application, install the Metadata UI Extension package
    in one of the user-specific or general shared resource folders:
    MAC OS: [user]/Library/Application Support/Adobe/XMP/Metadata Extensions
    /Library/Application Support/Adobe/XMP/Metadata Extensions
    When I place the "Sample Extension" files in /Library/Application Support/Adobe/XMP/Metadata Extensions, none of the sample panels appear in Adobe Bridge.
    What am I doing wrong?
    Help!

    Hi David,
        You are using Bridge CC not Bridge CC 2014. The document you are referring will not work for CC.
        You need to follow the earlier documentation (hope you will find on devnet). For your reference I am putting the following code, save it in file name "sample.xml". Put this file on the path where you have installed bridge\Custom File Info Panels\4.0\custom. Restart bridge if it is not visible, check in bridge preferences and check the checkbox.
    Code for sample.xml is
    <?xml version='1.0' encoding='UTF-8'?>
    <xmp_definitions>
      <xmp_schema prefix='mypanel' namespace='http://ns.adobe.com/mypanel/' label='$$$/my/FileInfoLib/Panels/Name=mypanel'>
             <!-- simple properties -->
            <xmp_property name="Text" category="external" label="$$$/Custom/Panel/Document Title=Property 1 Name:" type="text"/>
            <xmp_property name="Text2" category="external" label="$$$/Custom/Panel/Credit=Property 2 Name:" type="text"/>
            <xmp_property name="Bool1" category='external' label="$$$/Custom/Property/BooleanInput_Label=Check Box Input:" type='boolean'/>
            <xmp_property name="Bool2" category='external' label="$$$/Custom/Property/BooleanInput_Label2=Check Box Input2:" type='boolean'/>
      </xmp_schema>
    </xmp_definitions>

  • LR adjustments not showing up in Bridge CS2

    When working with .DNG files in LR, it seems that Develop settings show up in Bridge CS3 (beta), but only some show up in Bridge CS2; the same is true for metadata, but only sometimes -- keywords tend to show up, Location, City, etc. don't. Using the "Export XMP Metadata to File" doesn't seem to make a difference.
    For example: if I adjust the contrast, then export xmp, I can see the difference in Bridge CS3, but not CS2. But if I change the white balance, the change shows up in both versions of Bridge.
    Any thoughts?
    Thanks,
    Martin

    Brilliant, Geoff! I had downloaded ACR 3.7 for the DNG converter, but apparently hadn't installed it for Bridge/Photoshop CS2, which were still using 3.6. I used "updates" in the Help menu, and 3.7 was installed automatically. All of the LR adjustments now show up in Bridge CS2.
    Thanks!
    Martin

  • Music from iPod not showing up on new computer

    I recently purchased a MacBook after using iTunes with an HP laptop. Once I hooked my iPod up to my new Mac, many songs that I downloaded from sources other than iTunes and from CDs I had burned onto my iPod did not show up in my new iTunes.
    Also, any new music I purchase from iTunes, if I want to put them onto my iPod, iTunes tells me that I must erase all other files before adding my new purchases.
    Ideally I would like to keep all of the existing music from my old iPod and have it transfered to my new iTunes library.
    What do I do?!

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • DNG files exported from LR4 not showing changes made when opened in PSE10?

    I have LR4, and once I make some develop changes I've been exporting the files I want to use as DNG.  I then open them in PSE10 to make final edits.  It's been working fine, actually I had an older version of Adobe Raw in my PSE on my other computer.  So when I opened in PSE it would ask if I wanted to conver to compatible version to edit in camera raw.  I always said no b/c I didn't need to do anymore raw edits.  Now that I have installed PSE on my new computer, it has the new ACR version I guess.  When I open the DNGs to edit now I no longer get this error message, but it's showing my contrast, etc. as a standard raw setting instead of the changes I made in LR.  Some are showing....like vibrance, but "recovery" which I know is "highlights" in LR, and other things are not showing correctly.  I know that the options are different, but I don't want to use the ACR settings that it's using when I open the file, or have to go through them again.  I'm sure there's something I'm missing but can't figure it out.  Thanks for any help!

    I quite simply did not comment on the issue of "it is supposed to be better to keep DNG files as opposed to NEF files now, right?"
    The issue you raised in your original post, and the issue of choosing DNG versus NEF, are completely separate and independent.
    The issue of transferring photos to PSE would cause the exact same problems in your case whether or not you use DNG or NEF.
    On the issue of converting photos from NEF to DNG, there are advantages and disadvantages, some people do and some people don't. If you'd like to know more, I suggest you search this forum, there are plenty of discussions on this topic.

  • ACR adjustments not showing up in Bridge

    I've done some searching but have not found an answer to my ?  So hope it isn't a repeat.  I'm on a iMac with 16 gig of RAM and updated graphics card running the latest version of Lion.
    After downloading the beta of CS6/ACR7 I have noticed that if I'm working on a photo in ACR and click "done" (not save image), the ACR adjustments don't always show up in Bridge.  Sometimes it might show the adjustments and other times it doesn't.  Doesn't seem to matter if the raw file is NEF or DNG.  It is very hit and miss.
    I did an update on CS5 before I downloaded the beta of CS6 and I've noticed that it does the same thing.  Went to my lap top with none of the latest updates and all adjustments in ACR show up in Bridge.  I compared ACR and Bridge Preferences and all was the same between the machines.  (Lap top is a MacBook Pro 15").
    Anyone have any idea what needs to be changed so all adjustments in ACR show up in Bridge?  If the adjustments in ACR are all I need to do, it is frustrating to have to do a "save image" and make a duplicate just to get the adjustments to show up.  I can use LR and have it work this way, but I prefer ACR.
    Thanks,
    Sue

    Thank you Ann!!!!!  That was the problem.  I sure appreciate your help.
    Sue

  • White Boxes from EPS Not Showing Up in INDD CS5

    this is kind of lame, but I'm still curious...
    I have an Illustrator eps file (CS4) that had black and white shapes, text, etc (very simple), however when I placed the eps file into InDesign (CS5), the white box did not show up. There is a black stroke around the box that appears, however the white does not appear. I went back and drew a new white box, resaved it and the new white box appeared. Any idea why the original file would not have come through properly?
    (PS...I'm using Windows)
    Thanks!

    White set to overprint?
    And stop using EPS...it's an archaic file format. Use native AI or PDF from Illustrator for best results.
    Bob

  • Preinstalled filters from CS5 not showing up in CS6 upgrade

    I just installed CS6 upgrade from CS5 but the Nik and Topaz software filters are not showing up.  How do I get CS6 to recognize them without having to reinstall all of them again.

    How do I get CS6 to recognize them without having to reinstall all of them again.
    You don't. The behavior is as it always has been - Adobe apps never migrate legacy plug-ins and content to avoid compatibility issues. and you will probably need updated vertsions for CS6, anyway.
    Mylenium

  • Emails sent from device not show in "Sent Box" and "BIS" issue

    Dear All and Rim: 
    New to BB world, needed following help...
    AOL mail box had connect with "Tour" successfully, service provided by Verizon.
    Mails sent from device are not show in AOL "Sent Box" nor Outlook Express's "IMAP" / "POP" server's Outgoing "SMTP" folder.
    Truly need copies to "Sent Box", Thanks for help!!
    Also try to set up "BIS" accout, error message said:
    "Your Account is not accessible via HTML Browser..
    Please use your device to access Black Berry Internet Service"
    I used this link:
    https://bis.na.blackberry.com/html?brand=vzw
    Thanks you,
    Jan
    Solved!
    Go to Solution.

    So for the mail issue seems sending myself a copy is the only way to go, right?
    That would be a solution.
    And about the BIS, my try was on a PC, it didnt work...  Anyway, i was going to log on to the BIS to work on my issue above, but seems it doesnt help now, so it doesnt matter if i can sign up or not.
    Well, that's entirely odd...I just used that link myself (from a PC) and get into my BIS account just fine. You can, however, use the device interface to BIS -- watch that demo I provided you above for instructions on that. BIS is merely a service, provided by your carrier. The PC/website method and the device interface -- those are simply two different interfaces into the same service, so using one or the other doesn't matter...they result in the same thing.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Importing from DVD not showing full video

    I'm trying to import a video (VOB file) from a DVD, but the full frame of the video is not showing. The frame size that is importing seems to be importing as a different frame size than the video is and I can't seem to change it. The import seems to be cropping it. If I adjust the size in the Program Sequence window, it is showing the cropped version of the video.
    Can any of the other files on the DVD be imported such as the IFO file?

    ... What other formats can iMovie & iDVD use? What do you recommend? ...just dv. and for stills jpeg, tifff.. and for music aiff, mp3... but that was not your question any other video-codec gets converted/has to be converted...
    ... which are apparently very, very big - one half-hour folder was 6 GB...rule: 1h video = ~13Gb... that is the amount of data on tape... iM uses a digital copy of that. many other codecs do a much better compression, BUT lossy!
    ... many times bigger than it needs to be...no, a video-DVD is meant for playback only...the compression codec just stores the delta(=difference) from frame to frame... for edit purposes, you need the info of EVERY frame on tape...
    ... How should I adjust the settings if I want to get an hour's worth of video & audio on a standard 4.7 GB blank DVD-R?
    ...you don't do settings using iDVD. this app needs a dv stream to work in the highest possible quality. use the export to iDVD feature of iM.
    in case, you spend a few k$, you can buy DVDSP, including a tool called Compressor... after learning a few years to handle it, you can result smaller files with higher quality.....

  • Music purchased from iTunes not showing up on Purchased playlist on iPhone

    The last few song purchases that I've made on iTunes are not showing on my Purchased playlist on my iPhone.  I do have Automatica Downloads turned on under the iTunes & App Stores settings on my iPhone.  I've tried signing out and signing in again on both my iPhone and computer.  I've also tried manually dragging the songs from my iTunes library to my iPhone through iTunes, but I'm when I click and drag the files from iTunes to the devices list, iTunes does not allow the songs to be moved to my iPhone.  Any suggestions?

    I had the same issue.  Try this:  go into iTunes, select your iPhone, go to Ringtones tab, check the Sync seclected Ringtones, deselect the ringtones that you pruchansed from iTunes Store.  Now Apply/Sync the phone.  When it's done, Go back to the Ringtones tab and select Sync all Ringtones.  Apply/Sync the phone again.  Now go to a contact and set a ringtone, you should see all the purchased ringtones.  Good luck.

Maybe you are looking for