Metadata Host Name
Hi All.
I need to extract mapping information from the OWB respository. I have managed to extract everything I need except one small piece (of fairly critical) data: the host name. I figured it would be stored in the locations view or the modules view but it's not in either.
If you look in Project->Database->Oracle->DB Name and then right-click->open editor, you get the module editor. Under the metadata location tab is database information like username, host, port, service and schema. What I need is the host name.
I did find the database link information in the information systems view but that turned out not to be the info I needed.
Any ideas where this might be stored? It's go to be in there somewhere. I'm going blind digging through these views. ;-)
Thanks in advance.
LewisC
Try the view cmpstringpropertyvalue_v. For example, to list all the properties of a location
SELECT val.logicalname, val.value
FROM
cmpstringpropertyvalue_v val,
cmplocation_v loc
WHERE val.propertyowner=loc.elementid
AND loc.name = '<location name>';
Nigel.
Similar Messages
-
Changing host name of OID repository... Where do I need to make changes?
We are moving our OID metadata repository to a different host and Im curious where I need to make the modifications in our OID installation to accommodate the new host name.
Things we have already done:
1) Modified and pushed out the new tnsnames.ora file.
2) ODM -> Entry Management -> Oracle Context Made changes to a) orclnetdescstring b) cn=OID -> cn=Description_0 -> cn=Address_List_0 -> cn=Address_0 -> orclnetaddressstring
3) Updated the %ORACLE_HOME%\OraHome\sysman\emd\targets.xml
After these changes were made, completed rebooted the system. OID seems to be working, however if I open a command prompt and 'tnsping OID' I still get the old host name, however if I fully qualify it, 'tnsping OID.xxx.local' it finds the correct host name....
Am I missing an update somewhere that causes tnsping to not find the correct host for the repository? Can I update the current repository registration via oracle tool?
ThanksIf you need to purchase Snow Leopard you can still purchase a copy from Apple's online store's telesales agents.[1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775.] Ask for a Sales Representative.
Third-party sources for Snow Leopard are:
Snow Leopard from Amazon.com
Snow Leopard from eBay
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. -
How can I get the host name from Email address?
hi
When I using socket to develope an email-sending servlet,I don't know how to get the host name from emial address.can you help me,thanksStripping off the user name will give you the domain of from field in the message. This is not the same as the host. Take a look at:
http://www.stopspam.org/email/headers/headers.html
Theres a pretty good discussion about email headers and how to use the information. You probably want to check the information here against the RFC.
Sean -
Hello All,
we have created shared folder on multiple client machine in domain environment on different 2 OS like-XP,Vista, etc.
from some day's When we facing problem when we are access from host name that shared folder is accessible but same time same computer when we are trying to access the share folder with IP it asking for credentials i have type again and again
correct credential but unable to access that. If i re-share the folder then we are access it but when we are restarted the system then same problem is occurring.
I have checked IP,DNS,Gateway and more each & everything is well.
Pls suggest us.
Pankaj KumarHi,
According to your description, my understanding is that the same shared folder can be accessed by name, but can’t be accessed be IP address and asks for credentials.
Please try to enable the option below on the device which has shared folder:
Besides, check the Advanced Shring settings of shared folder and confrim that if there is any limitation settings.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Hi all,
I have a 2013 farm set up with the App model
1 web application for path based site collection using host name
1 web application with SSL (no host name)
1 web application for mysite
My business request is that I need to migrate SSL enabled 2007 content to this farm and use host name site collections. I tried to create one more web application for this without any luck (the 443 IIS folder is already used by another web application).
I thought I bind the previous 443 web application with another IP address should be fine. Seems like the IIS site is taken (https://server name:443) so it will not let me create one more. How can I solve this problem so I can create the web application
to host those host name site collections? Any suggestion is greatly appreciated.
Thanks in advance.
SallyHi Trevor,
Thanks again for your quick reply. I try the option 2 right after your post. I use my front end server name for public URL (https://WFEName:443) and it fails again. The error message is:
The directory C:\inetpub\wwwroot\wss\VirtualDirectories\443 is already being used by another IIS Web Site. Choose a different root directory for your new Web application.
After reading more, I saw mix Hosted Name Site collection and Path-based site collection aren't recommended. Unfortunately I already have Path-based site collection created with App model web application
(the web application without host name) in my farm. In my Option 2, that web application without host name is used for App routing. This takes the root folder 443 which will not allow any other web application to use the same name again.
Does that mean we can't create Host Named Site collection in the same farm? Is there any configuration I need to check?
Thanks again.
Sally -
HOW TO DEFINE VIRTUAL HOST NAME IN HPIA64 + SAP R/3 ENTERPRISES 4.7
Hi all,
I am trying to install sap r/3 enterprises 4.7 with OS as HP-UX and Database as Oracle in a cluster environment.
In cluster environment sap installation should be done on virtual hostname ( package id ). I'm using the env variable SAPINST_USE_HOSTNAME=<VIRTUAL HOSTNAME>.
My cluster is running and I'm able to ping it from network, but at the time of SAP Installation my sapinst starts with the physical host name not with the virtual host name.
What can be the solution ..?
Thanks,
Chandresh Pranami.Hi Chandresh,
Try executing sapinst with virtual hostname.
eg. ./sapinst SAPINST_USE_HOSTNAME=<VIRTUAL HOSTNAME>.
This should work.
-Pinkle -
Domain name/"primary DNS" name/mail host name/mail server name/mx name
Hi,
I have registered my domain name (N.com) with an external dns server and created an MX record (mail.N.com) for it as well. My server sits behind a router and internet traffic is port(80)-forwarded to my server's fixed internal ip address (I can access my webpages from the internet just fine). When I initially setup the server I was asked to give it a "primary DNS name." I naturally assumed that N.com was supposed to be entered here, but that just caused all kinds of problems (though I still do not understand why). So I reinstalled and currently have server.N.com as the primary DNS name of the server (although it shows up in Server Admin and Workgroup Manager as server.local--why is that?)
I have had no luck getting any email from the internet with the default settings in mail services (domain name of N.com and host name of server.N.com). Having no luck with the defaults, I assumed that maybe I needed to change the host name to "mail.N.com" so that it matched the MX record. I also changed the user preferences in Workgroup Manager to receive mail from mail.N.com--but still no luck. Could someone tell me what I am doing wrong and how come none of the Mail Service literature mentions anything about what a mail "host name" is supposed to be? Is it supposed to be the same as the "Mail Server" name that Workgroup Manager asks each user for? and is it the same as the MX record name?
I am just needing some help to connect all these variously named, but undefined, dots.
Also, how come I can access webmail from the internet using www.N.com/webmail but can't do it from any computers within my physical network (I have to use IPaddress/webmail or server.local/webmail)?
Also, should my user email addresses be [email protected] or [email protected] (which is the current default)?
Thanks in advance and good luck!
JohnI had been told by a friend that ... regular email coming in from the internet would go through port 80
Unfortunately you were misinformed.
My MX record needs the extra subname (such as "mail") in front of the domain name, right?
Not at all. A MX record for 'N.com' is entirely valid (expected, in fact).
An MX record tells remote mail servers where to send mail for any domain/subdomain. If you think about it, let's say you worked for Apple and you wanted people to be able to send email to [email protected], well then you need an MX record for 'apple.com'.
You can see if you dig MX apple.com that they actually have 9 MX records, but the point still stands.
Now, you might also have MX records for subdomains so that you can have [email protected], [email protected], [email protected], etc. Each of these subdomains would need a separate MX record.
So, in general, for any set of email addresses @[anything.]domain.com you have a MX record telling remote mail servers where to send that mail.
Of course the MX record name is mail.N.com, but I think you are implying that the in the Mail settings of Server Admin where it asks for domain name all I need to put there is the N.com, right?
What I mean is that you need to set the domain name to whatever domain name you expect to receive mail at.
If you want users to have email addresses in the form of [email protected], then you enter 'N.com'.
If you want users to have email addresses in the form of [email protected] then you enter 'mail.N.com'.
If you want both forms, enter one in the main domain and add the other(s) in the Advanced -> Hosting -> Local Host Aliases section.
Is there anything in the Mail settings that needs to have the full MX record name (mail.N.com)?
Yes. Either the 'domain name' or the 'Local Host Aliases' needs to contain the same thing as your MX record. That's because the MX record tells remote servers to send mail to this machine, but the machine won't accept the mail unless it is configured to do so.
What is the "host name" supposed to be?
This should be the name that remote servers see when this machine tries to send outgoing mail.
Ideally this should match the reverse DNS of your IP address, that way when it connects to a remote server it says "Hi, I'm $hostname" and the remote server can lookup the machine's IP address and see the same result. This will reduce the problem of remote servers thinking you're sending them spam.
If you only have a single IP address then this probably needs to be something like 'N.com'. If you don't have control over your reverse DNS then you're going to run into a problem.
Also in the user accounts (in Workgroup Manager) what should the "mail server name" be? Is it the host name or the domain name?
Off hand, I don't know.
Also, why are all the default user email addresses [email protected] (the name I gave the server at setup)? Why doesn't the user accounts create [email protected] as the default address?
Presumably because the mail server says it is 'server.N.com' and therefore any accounts on that machine would be [email protected]. Changing the domain name (as above) should fix that. -
Clearing Host Name from Dynamic DNS set up - Home ...
I changed my DNS provider due to poor performance. Since then I have been trying to change the host name and it stays with the original. Do I have to rest teh home hub back to default settings and set it up again?
If so this is very poor...!Oh and that is "reset the hub"
-
How to resolve a host name from IP using JNDI/DNS service provider
Hi
I got two questions on JNDI/DNS service provider:
1) How to resolve a host name when i got an IP
I understand How I do it inverse.
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY, "com.sun.jndi.dns.DnsContextFactory");
env.put(Context.PROVIDER_URL, "dns://"+server+"/"+domain);
DirContext ictx = new InitialDirContext(env);
Attributes attrs1 = ictx.getAttributes(host, new String[] {"A"});
2) This example above works when I specify the domain in the provider url.
If I am not specifing a domain but only the dns server I got an NameNotFoundException.
What should I do if I don't got the domain?
get the availible domains and loop on them?Hi,
if your DNS server supports that, you can do a reverse DNS lookup. This works as follows:
String server = "your.dns.server";
String domain = "in-addr.arpa";
String ip = "4.3.2.1";
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY, "com.sun.jndi.dns.DnsContextFactory");
env.put(Context.PROVIDER_URL, "dns://" + server + "/" + domain);
DirContext ictx = new InitialDirContext(env);
Attributes attrs1 = ictx.getAttributes(ip, new String[] {"PTR"});1: Use the pseudo-domain in-addr.arpa
2: Use the reverse IP address for lookup, i.e. if your host has 1.2.3.4, use 4.3.2.1!!
3: Request the PTR attribute
see also [http://en.wikipedia.org/wiki/Reverse_DNS_lookup|http://en.wikipedia.org/wiki/Reverse_DNS_lookup]
Martin -
Multiple machines with the same host name
Has anyone tried it? Is it supported? We have this policy around here that all db servers are called db2 with different domain names. When I tested it, one host registered with GC properly although without domain name (ie db2 only), but agents on the remaining db2 hosts keep dying and never show up in GC. I'm gonna play with it some more, just wanted to ask if anyone has heard of such problem ...
Thanks,
JuliusActually, if you see the emd.properties file in the $AGENT_HOME/sysman/config directory, you should be able to specify fully qualified host name (e.g. db2.domainname) in the agent url.
If the agent has secure communication setup with OMS, then you will have to re-secure the agent after changing agent url in emd.properties.
Hope this helps. -
Web Dynpro Application URL Host Name Not Correct
Hello,
I am developing a web dynpro application in our development system but when I activate the application it gets a URL that points to our test system. When I test the application in HTTP Service (SICF) the URL for the development system is passed to the browser. WHere do you maintain the host that is being used to build the URL for the web dynpro application when it is activated.
Thanks,
Jim N.Hello,
To configure the FQDN (host name full), please take a look at these:
[http://help.sap.com/saphelp_nw2004s/helpdata/en/67/be9442572e1231e10000000a1550b0/content.htm] and
[http://help.sap.com/saphelp_nw2004s/helpdata/en/43/e86de5008b4d9ae10000000a155369/frameset.htm].
Regards, -
I get a pop-up message saying "A server with the specified host name could not be found", whenever I try to access any streaming websites/apps or even WhatApp over Wi-Fi and I cannot access the specific THING for that moment, and I've tried switching Wi-Fi On and Off both in my Phone and also in the Router. I got an internet connection and a Wi-Fi router just before two days, and it's happening since. I got the internet speed around 80kbps and i can easily stream YouTube videos except sometimes, I receive that annoying message. I can't even browse the internet in Safari, which says "No Internet Connection"(Even though the Wi-Fi is connected), and I can access it after somewhile (say 10 minutes, it'll be perfectly alright). I use iPhone 4s. And everything about the internet connection is totally fine in my Computer, but not in my iPhone, as I've explained the issues, above. If there are any technical settings that I should change/modify, either on my computer(Windows 7 OS) or in my iPhone(iOS 7.0.4), PLEASE let me know
I hope I've provided enough information for the reader to understand my point. (I apologize for my verbal mistakes, if there are )
THANKSHello Paneesh,
Thank you for the details of the issue you are experiencing with Wi-Fi on your iPhone 4s. I recommend the following steps:
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
If the issue is still unresolved Wi-Fi disconnects or signal strength is less than expected
Move closer to the Wi-Fi router (access point).
Check for sources of potential interference.
Remove any case, stand, or other accessories from your iOS device and see if signal strength improves.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
You can find the full article here:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thank you for using Apple Support Communities.
Best,
Sheila M. -
When attempting to print with an HP P2015 cabled to an AirPort Extreme, the network won't connect to printer. The Print Que message is "Network host (name) is busy; will retry in (number) seconds." When I delete the file to be printed, the Print Queue screen says "Printer Ready".
More Information:
The printer's Queue Name is Hewlett-Packard HP LaserJet P2015 Series
The Location is "(my name) AirPort Extreme"
URL is "Hewlett_Packard%20%HP%20LaserJet%20P2015%20Series._pdl-datastream._tcp.local./ ?bidi" (for whatever that means)
Driver Version is 18.4
Printer Software is HP LaserJet P2015 Series
The printer is listed as a printer on System Preferences/Print&Fax screen
If I connect the printer cable directly to the iMac, the printer works fine.
Any helpful directions would be greatly appreciated.I came across an Apple article last modified 6/2/08 (Printer troubleshooting for AirPort Base Stations and Time Capsule). It suggested the old standby, i.e., disconnect the AirPort Extreme Base Station from its power source, turn off the printer, turn on the printer, and reconnect the AirPort to its power source. It worked. I guess disconnecting the AirPort cleared out the network host. Yea.
-
Database host name changed, what needs to be configured in obiee 11g
Hi,
we recently changed database Hostname. What are the next steps to configure in obiee? when i login to oracle enterprise manager, all the services are down?
Please any help is appreciated .
Thanks,
Ashwini KCheck this Rittman Mead Consulting &raquo; Blog Archive &raquo; Oracle BI EE 11g – Managing Host Name Changes
-
How to get client IP or machine Host name of connected user?
I'm running my Web app on tomcat 6
I want to find out the ips/Host name (any information about the user) of the user that logging into my web app... i tryed the following :
.getRemoteAddr() and getRemoteHost() from the request and even getHeader("x-forwarded-for") but all this return nothing...
the web app is inside the company and users connects from inside the comp's also....
all user connect from Windows machines
how can i get the information of the user?
Thanks ahead.
Edited by: vedmack on Jan 27, 2009 9:28 PMhere it is:
i replaced several string with the following : companyname, servername, WebAppName this three names are the same for all users that are doing the log in ... so its irrelevant anyway.... so there is not helpfull information in this headers....
via=1.0 companyname-PRX
cookie=JSESSIONID=326E2E62678C8B55063F60A432C8A306
content-type=application/x-www-form-urlencoded
user-agent=Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 2.0.50727; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; .NET CLR 1.1.4322)
host=servername.companyname.com:9080
accept=image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, application/x-silverlight, application/x-ms-application, application/x-ms-xbap, application/vnd.ms-xpsdocument, application/xaml+xml, application/x-shockwave-flash, */*
referer=http://servername.companyname.com:9080/WebAppName/
accept-language=he
pragma=no-cache
x-novinet=v1.2
connection=Keep-Alive
content-length=158
Maybe you are looking for
-
How to load an exteranl html file in a div
All- Im sure this has been covered but I can't find what I'm looking for. How do I load content from an external html file into a div in Edge? I want my client to have the option of updating the html files so i don't have to edit them in edge The fil
-
Apparently you can have 5 computers registered for iTunes. I have 3 active computers but I guess I have other computers that are still activated that I no longer use and I no longer have as they crashed. Is there a way to delete or see what the oth
-
Why Custom EL Functions are not supported in ADF Faces??
Im using jdev 10.1.3 1.- I declare a java class, with a static function for concatenation purposes. 2.- I create my tld. 3.- I call the function in my jsp. a) If I use the $ prefix, works PERFECT. b) If I try to call this in an outputText (i.e) - If
-
Hi Friends, Can anybody please let me know the settings required to convert the PO output into PDF format? After giving final output the system has to save simultaneously to PDF file If i got to PO display and select Messages>>EDIT display originals
-
i have a sequence shot on the 550d/rebel T2i, I converted it to prores 422 in MPEG Streamclip and edited in fcp. What is the best export that i can do to preserve quality and prevent pixelation. Rite now, i have been just clicking on the export to qu