Metadata - Issue Can You Customize Apertures Metadata to work with Bridge

I am a photographer and my workflow is to import all my images into Aperture library and add metadata. When exporting image is it possible to integrate the data with Bridge? This is important feature as most people do not import images with Aperture. The issue is that many of the field names are different or non existent between the two programs. For example Location in Bridge is Sub location in Aperture. Can you add contact info such as URL, email that are included within Bridge?
Is there a way to customize the metadata fields to work with CS3?
Any advise is greatly appreciated
Message was edited by: Keith254
Message was edited by: Keith254

Hello Dhruser1,
I think that the DAQmx Perform Bridge Offset Nulling Calibration should work for the SCC-SG24 module.  Take a look at this article:  Removing Large Initial Offset for Load Cell or Strain Measurements with SCXI-1520 or PXI-4220 in particular it mentions that using this VI in addition to the auto zero can introduce an offset.  If you're doing both these is likely the cause.
Also, when you specify specific channels using the channels input are you also setting the "skip unsupported channels to false?  If not this may be why it affects other channels.
I hope this helps, and if not please feel free to post back with an update after trying these things.
Cheers,
Brooks

Similar Messages

  • Can you have 2 apple tvs working with one computer - both active at the same time?

    Can 2 Apple TVs - Generation 3 - work off the same computer?
    I can't seem to get the 2nd Apple TV to find the network yet I have full signal and the Network name is correct.
    Can they work at the same time using different content?

    Hi SwedelostinAmerica,
    Welcome to the Apple Support Communities!
    The iPhone can maintain multiple pairing records, but it can only connect to one headset or hands-free device at a time. However, in your situation there may be a solution. You can connect the iPhone via Bluetooth for calls and use the 3.5mm jack on your iPhone and car radio to connect for music.
    The following article explains Bluetooth pairing and usage. Please use it as a reference.
    iOS: Third-party Bluetooth accessories
    http://support.apple.com/kb/HT1664
    Have a great day,
    Joe

  • Can you get multiple phone socket working with BT ...

    Hi,
    So I recently had a BT engineer visit, he connected the phone line on the main socket then left. A week later they turned my BT infinity on.
    It works great but the main socket is in a different room to my office. I have a phone socket in my office right next ot my pc. But when i plug my router into this socket it fails to produce an internet connection. 
    Is there a way to get multiple phone sockets working? I would like to move my hub so it is in my office but the socket isnt giving off internet.
    Any help is much appreciated.
    Thanks.

    You need to identify the cables connected to the removable faceplate beside the red arrow - these are the extension cables to other sockets in the house. 
    Connected from here you will get voice only - not data. 
    If there is more than 1 cable you need to identify the one to your office, remove it and fit the cables to the yellow arrow connections. 
    You only need to connect the cables connected to 2 & 5 (there may be more connected to the faceplate)
    guide on this link  although it does not tell you the 2/5 connection order - I don't think polarity matters - but someone with more knowledge can advise. 
    A potential problem you may have is if there are other extension sockets connected to your office socket you use (and not the faceplate) as these then are not suitable  for phone - only data. 
    With DECT phones and the need for just one basestaion not really a probem nowadays but you need to know where each socket in your house is connected from, and what you want to use it for. 
    If you have any BB problems, BT will also insits you plug the router/modem back into the master socket for all testing. 
    EDited to add - a krone insertion tool is best for inserting the cables to the socket and has a nice pick to disconnect also. They are easy to use - search you tube for a video. 

  • Can you build Flash elements to work with responsive websites?

    Hey everybody,
    Just a quick question ...
    The company I work for is now starting to develop responsive websites and portals. We have several websites that utilize Flash and will continue to do so in the future.
    My concern is that the Flash components will not resize when the screen size shifts. Is this correct? Is there a way I can develop these portals/sites/components to behave responsively as the screen sizes change?
    Any and all advice is very welcome!!! Thank you in advance!!!

    If interested on moving to HTML5 from Flash,check out  this http://www.adobe.com/products/flash/flash-to-html5.html

  • Can you customize what folder MAIL goes to when adding attachments?

    Can you customize what folder MAIL goes to when adding attachments?
    My friend has 2 email addresses for businesses.
    He has invoices in folders for both, and wants to set up the Mac like this:
    When he writes from one email address and attaches documents - he want the Mac always to go to the corresponding folder for that company of his. Same for the other email address...
    Make sense?
    Can this be done?
    Thanks in advance....

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether your problem is caused by third-party system modifications that load automatically at startup or login. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click  Log in.
    *Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • How much can you customize Professional level storefronts?

    I know that you need to be an Enterprise user to have completely customized storefronts, but how much can you customize Professional user storefronts? What do they look like? Most magazines I've seen are Enterprise level

    With a Professional account, you cannot customize the storefront. If you create a subscription app, you can specify subscription tiles and indicate with subscription durations are available, but that's about it.

  • My macbook pro 2010 extremely noisy and a warning flashed on the screen about a power or battery issue- can you help please?

    My macbook pro 2010 has started getting extremely noisy in the last few months and I had a strange warning flash up on the screen a month or so ago about a power or battery issue… can you help please?

    Calibrating a 2010 MBP is not required.  All it will achieve is putting an unnecessary cycle on it and shortening its life:
    http://support.apple.com/kb/ht1490
    You may try a SMC reset:
    http://support.apple.com/kb/HT3964
    Open System Information>Power and post the following from your MBP:
    (Make certain that the charger is connected)
    Ciao.

  • Can you please put me in touch with the support  for the trial copy of adobe acrobat XI pro which I had tried out on March 15 for 30 days. I have  been trying to cancel since the cost is too much and Acrobat Reader is OK for me. I can't find uninstaller.

    Can you please put me in touch with the support  for the trial copy of adobe acrobat XI pro which I had tried out on March 15 for 30 days. I have  been trying to cancel since the cost is too much and Acrobat Reader is OK for me. I can't find uninstaller.
    I have had to erase my disk since then with trouble with Apple Store not recognising my machine and the reload from Time Machine has given complications . Can you please cancel my trial and return my Trial money.

    If you paid for what you used then it was not a trial.
    Look thru the following links and use the chat option if required for your situation:
    Cancel your membership or subscription | Creative Cloud
    https://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
    https://forums.adobe.com/thread/1703848
    Chat support - For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Creative Cloud support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )
    Phone support | Orders, returns exchanges
    http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • How can I make Aperture share on Flickr with sRGB?

    Since I upgraded to 3.3, all photos I share on Flickr have an embedded Adobe RGB profile. Changing Web Export presets has no effect; neither does any other setting I can find. How can I make Aperture share the images with sRGB instead of Adobe RGB?

    If it is possible you do it by changing the print product country in the iPhoto preferences
    LN

  • HT204655 How can I get an Aperture version that works with 10.10.3?

    Photos seems to be a minimal improvement to iPhotos and a terribly inadequate replacement for Aperture.  Aperture is working with 10.10.2 on my new MAC, but when I installed 10.10.3 on my macbook, Aperture is crossed out.  When I open it, I get a message "this version of Aperture does not work with OS X Yosemite".  It also says I can get the correct version from the App store for free.  when I look for Aperture on the App store it is not listed.  What has Apple done?

    I Called Apple and they walked me through the process of getting Aperture to work on OSX 10.10.3:
    Find Aperture in your Applications folder then
    Drag it to Trash and empty Trash (your Aperture library is not affected by this).
    Restart your computer
    Log on to App Store, and find your Purchases
    locate The Aperture application.
    It should show Install, and not Upgrade at this point.
    click on that to download Aperture 3.6
    instal that in your Applications folder.
    Of course, this only works if you purchased Aperture from Apple, and registered it with them.
    This is worked for me and I now have Aperture 3.6 running on Yosemite. The drawback here is that there is no further support will be offered for Aperture, so another alternative will eventually be required. I took advantage of an offer from Adobe, and downloaded Lightroom CC and Bridge CC (Creative Cloud). I already had Photoshop CC, but they bundled it all together for me at a very reasonable price. All these applications will use your Aperture and iPhoto libraries should you wish to import them into the application, so there will be no duplication of Libraries.  Hope this helps you like it did me.
    Thank you for posting your solution. I'm sure it will help others in the future.
    You know, many people continue to use discontinued software for years without problems. There are millions of people out there still using iMovie HD 06 and iDVD because there is nothing better.

  • How can you use iMessage between 3 iPads with 3 different users but only one Apple ID?

    how can you use iMessage between 3 iPads with 3 different users but only one Apple ID?

    No you do not need separate Apple ID's in order to use 3 devices with one Apple ID. I use 4 devices to Message and FaceTime and all use the same Apple ID. You do need to add additional email addresses for the other devices.
    Look at this very informative video for the instructions.
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l

  • HT1420 Can you have more than one device with a different Apple ID authourized to the same computer

    Can you have more than one device with a different Apple ID authourized to the same computer

    I think you are using the same Composition Class on both project. On the properties tab, you can change this number (e.g.: EDGE-1637270).

  • Can you help I was having problems with my iPod so I restored it but I accidentally set it up as a new iPod is there any way to restore it from an old  backup when I right click iPod in iTunes there isn't one anyway to recover one or find it on computer

    Hi can you help I was having problems with my iPod so I restored it but I
    accidentally set it up as a new iPod is there any way to restore it from an old
    backup when I right click iPod in iTunes there isn't one anyway to recover one
    or find it on computer

    The following says how to restore from backup.
    iOS: How to back up
    If you go to iTunes>Preferences>Devices you can see if you have an iTunes backup. You need one dated before or the exact time you started the restore.

  • HT201343 Can you AirPlay to an Apple TV with the MacBook closed? I have a late 2011 MacBook Pro.

    Can you AirPlay to an Apple TV with the MacBook closed? I have a late 2011 MacBook Pro.

    If you are using airplay then that should be fine once the content is playing. You can't use home-sharing in this manner however.

  • Can you share books purchased from itunes with different itunes accounts

    can you share books purchased from itunes with a different itunes accounts

    See if this will work for books as well as music: http://support.apple.com/kb/HT1203

Maybe you are looking for