Metadata Management Setup connection error

I'm trying to install BO Metadata Management (3.0) over a BO XI R3.1, to try it's features and testing.
After the setup launch of "Metadata Management" I fill my credentials to log on to BO CMS, but the setup fails with "Test connection failed" error, without giving any further error details. The BO is functioning, I can logon with the same credentials to CMC, InfoView and so on.
As a result the setup program aborts.
Can anyone give some help on installing Metadata Management  with BO XI R3.1, or had the same error?
Thanks in advance.

It seems that I am facing the same problem when I am trying to install BOMM XI 3.1 (12.1) on top of BOE XI 3.1 SP3.?  I am sure that the connection information is correct. Who can help out here?
MKA

Similar Messages

  • Metadata Manager Repository Configuration Error

    I'm trying to install XI 3.1 Metadata Manager FP1, and run into the following error:
    "Metadata Management Repository Configuration
    Metadata Management Repository configuration failed with the following error.
    The plugin CrystalEnterprise.MM.Repository does not exist in the CMS (FWM 0217)
    IDL:img.seagatesoftware.com/OCA/oca_abuse:3.2
    InfoObject CrystalEnterprise.MM.Repository was not found.
    Unable to initialize Metadata Management Core.
    Utility failed with code 3.
    You need to re-run the installer again."
    I ran it again and got the same error. I have a SQL Server database set up, ODBC connections test successfully. Anyone know how to resolve this issue?

    I ran into the same error, and a colleague was able to figure it out. I thought I'd share that in case someone else runs into this.
    We have two CMS servers. When I was installing MM's CMS components on the first server, it failed late in the install because it couldn't find an object that was installed earlier. It must have been accessing the second server, even though I entered "localhost" as the CMS location. By disabling and stopping the second server in the CMC, I was able to complete the install.
    Regards,
    Sean

  • HP Web Services Setup - Connection error. Check Internet connection.

    I am trying to enable HP Web Services but Connection error. Check Internet connection. .
    I use static ip with Preferred DNS Address: 8.8.8.8 and 8.8.4.4 and it does not work.
    I changed to DHCP also it does not work.
    I have a ZTE home modem router connected to the printer.
    This question was solved.
    View Solution.

    Hi MaBek,
    Can you check if your printers IP address is valid.
    If you have a laptop or PC connected to the same network, open a browser and type the IP address in the address bar and hit enter. 
    This should open a Embedded web Server page if the IP address is valid.
    Here you can navigate to Web Services tab and click on enable to enable web services.
    Regards,
    Oliver
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"--Please mark the post that solves your problem as "Accepted Solution"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.

  • Errors in the metadata manager

    Hi Experts,
    Periodically we're seeing Error Event ID's 18 and 19 on our SSAS server (SQL Server 2008 R2) hosting SCSM Data Warehouse DB's.
    The cube's appear to be processing OK from what I can tell, but everything I can find online relating to these errors indicates some corruption in the Data directory.  We get these errors in two different, separate SCSM environments (SCSM 2012 SP1 UR4). 
    Has anyone ever experienced these Errors before?
    Below are the details for these Errors.
    Log Name:      Application
    Source:        MSSQLServerOLAPService
    Date:          1/9/2014 3:07:12 AM
    Event ID:      19
    Task Category: (289)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      SCSMP06SQL.wcbbc.wcbmain.com
    Description:
    Errors in the metadata manager. An error occurred when loading the ReviewActivityCreatedByUser partition, from the file, '\\?\H:\OLAP\Data\DWASDataBase2.0.db\SystemCenterChangeAndActivityManagementCube.0.cub\ReviewActivityCreatedByUser.0.det\ReviewActivityCreatedByUser.223.prt.xml'.
    Log Name:      Application
    Source:        MSSQLServerOLAPService
    Date:          1/9/2014 3:33:08 AM
    Event ID:      18
    Task Category: (289)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      SCSMP06SQL.wcbbc.wcbmain.com
    Description:
    Errors in the metadata manager. An error occurred when instantiating a metadata object from the file, '\\?\H:\OLAP\Data\DWASDataBase2.0.db\SystemCenterWorkItemsCube.0.cub\BillableTimeBilledByUser.1830.det.xml'.

    Hi David,
    Did you end up resolving this? I've just come across the same error this morning (different cube reference though) and am beginning to look at the issue.
    Cheers,
    Lain

  • Repository Connection Error

    Hi All,
    Recently we upgraded OS from Windows 32 Bit to Linux 64 Bit and we installed OWB 11g R2 and we exporeted metadata of OWB 11g R1 and imported to OWB 11g R2. Every thing is working fine.
    But weekly twice we are facing issue as follows: When we are trying to redeploy the few objects at Control Centre Manager:
    REPOSITORY CONNECTION ERROR:+
    The connection to the Repository was Lost, becasue of the following Database Error : Closed Connection+
    Exit OWB without coming+
    Let us know how can we avoid the above error?
    Regards,
    Ava

    Good afternoon,
    What is the exact version of the database that you're trying OWB on?
    If it's a 10gR2 database, at present there is no production OWB version that is certified to work on that.
    Cheers, Patrick

  • SSIS 2012: SSIS Error Code "Excel Connection Manager" failed with error code 0xC0202009.

    Hi,
    This is kind of weird issue that I am experiencing with excel connection manager in SSIS 2012. This issue occurs sometimes but when I close and re-open SSDT (SQL Server Data Tools - newer BIDS) then this issues goes off temporarily.
    Just FYI, through SSDT environment I executed the package successfully with both settings Run64bit runtime setting to Yes and No when error does not occur.
    So far I have installed
    http://www.microsoft.com/en-us/download/details.aspx?id=13255 (Microsoft Access Database Engine 2010 Redistributable).
    I still remember for older versions of SQL Server (2005 & 2008) that I have executed Excel connection SSIS packages with Run64bit runtime = false i.e. in 32-bit mode. As far as I know I think Excel 64-bit issue has been resolved with SQL Server
    2012 release.
    Here is the detail of error message:
    TITLE: Package Validation Error
    Package Validation Error
    ADDITIONAL INFORMATION:
    Error at Data Flow Task [Excel Source [2]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager "Excel Connection
    Manager" failed with error code 0xC0202009.  There may be error messages posted before this with more information on why the AcquireConnection method call failed.
    Error at Data Flow Task [SSIS.Pipeline]: Excel Source failed validation and returned error code 0xC020801C.
    Error at Data Flow Task [SSIS.Pipeline]: One or more component failed validation.
    Error at Data Flow Task: There were errors during task validation.
    Error at Package [Connection manager "Excel Connection Manager"]: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
    An OLE DB record is available.  Source: "Microsoft Access Database Engine"  Hresult: 0x80004005  Description: "Unspecified error".
     (Microsoft.DataTransformationServices.VsIntegration)
    Here are my environment details:
    SQL Server 2012 {Microsoft SQL Server 2012 (SP1) - 11.0.3368.0 (X64) } , Excel 2010 (32-bit). I am developing SSIS code on Virtual desktops with Windows 7 32-bit OS.
    Also it occurred to me that since Virtual Desktops are on Shared Infrastructure, the source files and SSIS packages (code) can be on Shared drives for e.g. \\<Corpnet>\userdata\<Corp_Users_Grp>\<Username>\Visual Studio 2010\Projects\Integration
    Services Project2\Integration Services Project2\Package.dtsx.
    Does this kind of Shared drives have any impact to give this issue?
    Thanks in advance!
    Ketan
    P.S.: I had look at this forum question -->
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/903bbe1d-e070-4c43-9d3b-0a5193550029/64bit-error-in-excel-connection-manager-in-ssis

    Hi Arthur,
    Thanks for your response.
    Yes, it looks like SSIS still has bunch of issues with Excel files like as follows:
    1) Some times excel source files cannot be parsed by excel source connection manager.
    2) For derive column conversion, we can't replace the existing column. rather, we have to add the derived column as " add as new column" which is tough to manage  while destination mapping.
    3) If an column in excel contains a data which is not of the data type assigned for the column in excel, the excel source reads that data as "null". For the same, we can't validate the data and redirect the erroneous data in reject file.  <-- For
    this we tried IMEX setting also
    4) In multi-tab/sheet excel file, excel source is unable to detect a tab and identify the metadata of the excel.
    I am also checking Microsoft connect for Excel issues with SSIS 2012(https://connect.microsoft.com/SQLServer/SearchResults.aspx?SearchQuery=excel#&&PageIndex=22
    As worst case scenario, I am thinking of converting Excel to CSV file or Flat text file. (http://www.mssqltips.com/sqlservertip/2772/importing-data-from-excel-using-ssis--part-2/).
    Do you think it is advisable to convert Excel into CSV or Flat file.
    Thanks,
    Ketan

  • The Managed Metadata Service or Connection is currently not available.

    I've been trying to create new Managed Metadata services but get this error when trying to manage them:
    The Managed Metadata Service or Connection is currently not available. The Application Pool or Managed Metadata Web Service may not have been started. Please Contact your Administrator.
    I've checked that the application pool that the Metadata service uses is running and that the account it's running under is in the farm administrators group. I've checked that the WCF hotfix is applied on the system by re-downloading KB971831 (I have Windows 2K8 SP2) and trying to run it again but it says it doesn't apply to my system (as I had installed it before installing SharePOint)
    I'm not sure what else to do - can anyone give any pointers?
    Thanks

    I've got the default one working again now, the new one "TM Metadata" has been added but shows the same error on the management page.
    I have some info from the logs:
    Failed to get term store during cache check for changes.  Proxy 'TM Metadata'. Exception: System.ServiceModel.ServerTooBusyException: The HTTP service located at https://localhost:32844/SecurityTokenServiceApplication/securitytoken.svc is too busy.  ---> System.Net.WebException: The remote server returned an error: (503) Server Unavailable.     at System.Net.HttpWebRequest.GetResponse()     at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)     --- End of inner exception stack trace ---    Server stack trace:      at System.ServiceModel.Channels.HttpChannelUtilities.ProcessGetResponseWebException(WebException webException, HttpWebRequest request, HttpAbortReason abortReason)     at System.ServiceModel.Channels.HttpChannel...     
    01/06/2010 15:38:18.98*    w3wp.exe (0x123C)                           0x079C    Office Server                     Taxonomy                          ch90    Monitorable    ...Factory.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)     at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)     at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout)     at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)     at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)     at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)    Exception rethrown at [0]:      at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)     at Syst...     
    01/06/2010 15:38:18.98*    w3wp.exe (0x123C)                           0x079C    Office Server                     Taxonomy                          ch90    Monitorable    ...em.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)     at Microsoft.IdentityModel.Protocols.WSTrust.IWSTrustContract.Issue(Message message)     at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustClient.Issue(Message message)     at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustClient.Issue(RequestSecurityToken rst, RequestSecurityTokenResponse& rstr)     at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustClient.Issue(RequestSecurityToken rst)     at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context, Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs)     at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForLegacyLoginContext(Uri context)     at Microsoft.SharePoint.SPChannelFactoryOperations.InternalCreat...     
    01/06/2010 15:38:18.98*    w3wp.exe (0x123C)                           0x079C    Office Server                     Taxonomy                          ch90    Monitorable    ...eChannelActingAsLoggedOnUser[TChannel](ChannelFactory`1 factory, EndpointAddress address, Uri via)     at Microsoft.SharePoint.SPChannelFactoryOperations.CreateChannelActingAsLoggedOnUser[TChannel](ChannelFactory`1 factory, EndpointAddress address)     at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.GetChannel(Uri address, Boolean& cachedChannel)     at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2c.<RunOnChannel>b__2b()     at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()     at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)     at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)     at Microsoft.SharePo...     
    01/06/2010 15:38:18.98*    w3wp.exe (0x123C)                           0x079C    Office Server                     Taxonomy                          ch90    Monitorable    ...int.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode)     at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2c.<RunOnChannel>b__2a()     at Microsoft.Office.Server.Utilities.MonitoredScopeWrapper.RunWithMonitoredScope(Action code)     at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.RunOnChannel(CodeToRun codeToRun)     at Microsoft.SharePoint.Taxonomy.Internal.TaxonomyProxyAccess.GetChanges(Nullable`1 rawPartitionId, DateTime sinceTime, Nullable`1 groupId, Nullable`1 termSetId, Nullable`1 changedItemType, Nullable`1 changedOperationType)     at Microsoft.SharePoint.Taxonomy.Internal.DataAccessManager.GetChanges(Boolean forAllPartitions, DateTime sinceTime, Nullable`1 groupId, Nullable`1 termSetId, Nullable`1 changedIte...     
    01/06/2010 15:38:18.98*    w3wp.exe (0x123C)                           0x079C    Office Server                     Taxonomy                          ch90    Monitorable    ...mType, Nullable`1 changedOperationType)     at Microsoft.SharePoint.Taxonomy.Internal.TaxonomyCache.CheckForChanges()   
    UPDATE : I've just gone back to IIS to check the pools and it looks like adding the 2nd metadata store has knocked out the app pool that the SecurityTokenService runs in.

  • The Managed Metadata Service or Connection is currently not available. The Application Pool or Managed Metadata Web Service may not have been started. Please Contact your Administrator.

    Hi,
    I'm not able to access the term store. I get an below mentioned error.
    "The Managed Metadata Service or Connection is currently not available. The Application Pool or Managed Metadata Web Service may not have been started. Please Contact your Administrator. "
    Since this is happening on my local machine (Dev environment). I have full control on the term store and the all the site collections.
    Hence, this is not a permission issue.
    I have checked, the Metadata service is active on the machine. All the application pools in IIS is running.
    After reading one of the recommendation on internet, I created a new Managed Metadata Service.
    After which I was able access both (old and new) MMS from Central Admin only (highlight the MMS from manage service applications and click Manage ) and not from the site collection (term store management).
    Now again its not working after I did an IISRESET.
    The managed metadata service (Managed Metadata Service Connection) is grayed out.
    ULS Error says:
    Failed to create ManageLink for service proxy 'Managed Metadata Service'. Exception: System.TimeoutException: The request channel timed out attempting to send after 00:00:09.9999999. Increase the timeout value passed to the call to Request or increase the SendTimeout
    value on the Binding. The time allotted to this operation may have been a portion of a longer timeout. ---> System.TimeoutException: The HTTP request to 'http://mitkar4:32843/7a91ec90b46843e995c144be48d804f0/MetadataWebService.svc' has exceeded the allotted
    timeout of 00:00:09.9990000. The time allotted to this operation may have been a portion of a longer timeout. ---> System.Net.WebException: The operation has timed out 
    Please let me know if you need more information.

    Hi Victoria,
    Thanks for your reply
    I tried making all the changes you had recommended and which are mentioned in the link you have provided.
    I tried making all possible combination of changes to the web.config and client.config files but it does not make any difference to the environment.
    One thing is that, my error in ULS logs has changed.
    Error 1: 
    Exception returned from back end service. System.TimeoutException: The request channel timed out attempting to send after 00:00:09.9999999. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time allotted
    to this operation may have been a portion of a longer timeout. ---> System.TimeoutException: The HTTP request to 'http://mitkar4:32843/b1640facdf8b49b0886fea1bd37b8eb3/MetadataWebService.svc' has exceeded the allotted timeout of 00:00:09.9990000. The time
    allotted to this operation may have been a portion of a longer timeout. ---> System.Net.WebException: The operation has timed out 
        at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context) 
        at System.Net.HttpWebRequest.GetRequestStream() 
        at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()     --- End of inner exception stack trace --- 
        at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream() 
        at System.ServiceModel.Channels.HttpOutput.Send(TimeSpan timeout) 
        at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.SendRequest(Message message, TimeSpan timeout) 
        at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)     --- End of inner exception stack trace ---    Server stack trace:  
        at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout) 
        at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout)     at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout) 
        at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout) 
        at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation) 
        at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)    Exception rethrown at [0]:  
        at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) 
        at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) 
        at Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication.GetServiceSettings(Guid rawPartitionId) 
        at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2f.<ReadApplicationSettings>b__2e(IMetadataWebServiceApplication serviceApplication) 
        at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2c.<RunOnChannel>b__2b()
    Error 2:
    Error encountered in background cache check System.TimeoutException: The request channel timed out attempting to send after 00:00:09.9999999. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time
    allotted to this operation may have been a portion of a longer timeout. ---> System.TimeoutException: The HTTP request to 'http://mitkar4:32843/b1640facdf8b49b0886fea1bd37b8eb3/MetadataWebService.svc' has exceeded the allotted timeout of 00:00:09.9990000.
    The time allotted to this operation may have been a portion of a longer timeout. ---> System.Net.WebException: The operation has timed out 
        at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context) 
        at System.Net.HttpWebRequest.GetRequestStream() 
        at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()     --- End of inner exception stack trace --- 
        at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream() 
        at System.ServiceModel.Channels.HttpOutput.Send(TimeSpan timeout) 
        at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.SendRequest(Message message, TimeSpan timeout) 
        at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)     --- End of inner exception stack trace ---    Server stack trace:  
        at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout) 
        at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout)     at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout) 
        at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout) 
        at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation) 
        at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)    Exception rethrown at [0]:  
        at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) 
        at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) 
        at Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication.GetServiceSettings(Guid rawPartitionId) 
        at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2f.<ReadApplicationSettings>b__2e(IMetadataWebServiceApplication serviceApplication) 
        at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2c.<RunOnChannel>b__2b() 
        at Microsoft.Office.Server.Security.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) 
        at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2c.<RunOnChannel>b__2a() 
        at Microsoft.Office.Server.Utilities.MonitoredScopeWrapper.RunWithMonitoredScope(Action code) 
        at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.RunOnChannel(CodeToRun codeToRun, Double operationTimeoutFactor) 
        at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.ReadApplicationSettings(Guid rawPartitionId) 
        at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.get_ServiceApplicationSettings() 
        at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.TimeToCheckForUpdates() 
        at Microsoft.SharePoint.Taxonomy.Internal.TaxonomyCache.CheckForChanges() 
        at Microsoft.SharePoint.Taxonomy.Internal.TaxonomyCache.<LoopForChanges>b__0().

  • HANA Studio Import- Manage connection error.

    Hi
    In HANA studio, while import, Manage connection is giving error.
    In BO Dataservice4.0, i have created Data store and gave ERP connection details to connect ERP system.I am able to import tables from ERP in Datastore.
    Also I gave input to Server address(DS IP) and Repository name(Local repository) in Configure import server at Studio.
    Import click gives below error in Manage connections
    Error while opening the connection DS_XXX. Use "Manage Connections" to check the connection details.
    Any settings has to be done? pls advice.
    Regards
    Magalingam

    Hi Chandra,
    We have solved the problem.
    We have completed the following steps of the master guide of HANA:
    Configuring Data Services for Metadata Import:
    1. Setting the Passphrase
    1.1. Log into the Central Management Console of SAP BusinessObjects Enterprise (BOE).
    1.2. Choose Manage > Applications
    1.3. Choose Data Services Application.
    1.4. Choose Settings.
    1.5. Enter the Encryption Passphrase.
    1.6. Choose Save.
    Note: The passphrase you set here should be the same as the one you set in the SAP In_Memory Computing
    studio.
    Postrequisite: Restart the TOMCAT and BOE services.
    Regards,
    Enrique.

  • Error on Loading Credit Management Setups using iSetup in target instance

    Hi All,
         I am trying to migrate Oracle credit management functional setups(Scoring model, Checklist, Automation rules) from source instance to target instance. I am trying to achieve this by the usage of iSetup. Once the Load is done, I am getting the following error and the setups are not migrated. This error comes up only for Credit management Setups. Not for other functionalities. Please help me out on this.
    +---------------------------------------------------------------------------+
    Application Implementation: Version : 12.0.0
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    AZR12LOADER module: iSetup R12 Loader
    +---------------------------------------------------------------------------+
    Current system time is 09-OCT-2013 03:15:18
    +---------------------------------------------------------------------------+
    Concurrent Request Parameters
    RELOAD_REQUEST_ID=
    DBC_FILE_NAME=DEVF.dbc
    SNAPSHOT_REQUEST_TYPE=E
    SNAPSHOT_NAME=RAC Credit Management Test
    RELOAD_METHOD=
    REQUEST_TYPE=L
    IS_REMOTE=Y
    JOB_NAME=RAC Credit Management Test1
    USER_NAME=DEPPS
    Downloading the extract from central instance
    Successfully copied the Extract
    Time taken to download Extract and write as zip file = 0 seconds
    Validating Primary Extract...
    Parsing driver.xml
    Time taken to parse the Driver file and construct setup objects:6 milliseconds
    Sorting Apis based on their dependency...
    Time taken to sort the Apis=12 milliseconds
    Printing sorted Apis
      Load Sequence 1
      1)AR_CMGT_Scores
    Oct 9, 2013 3:15:48 AM oracle.adf.share.config.ADFConfigFactory findOrCreateADFConfig
    INFO: oracle.adf.share.config.ADFConfigFactory No META-INF/adf-config.xml found
    Name: AR_CMGT_Scores
    Type: BC4J
    Path: oracle.apps.ar.ispeed.creditmgt.scores.server.ScoresAM
    Time Taken(seconds): 2.0
    Importing rows from xml file, and validating rows ......
    Message not found. Application: AZ, Message Name: AZW_FWK_USER_ROW_EXCEPTION. Tokens: VONAME = Scores; KEY = Score Model Id = 'null'
    ; EXCEPTION = oracle.jbo.RowCreateException: JBO-25017: Error while creating a new entity row for ScoresEO.
    java.lang.Integer incompatible with java.lang.Long
    Message not found. Application: AZ, Message Name: AZW_FWK_USER_ROW_EXCEPTION. Tokens: VONAME = Scores; KEY = Score Model Id = 'null'
    ; EXCEPTION = oracle.jbo.RowCreateException: JBO-25017: Error while creating a new entity row for ScoresEO.
    java.lang.Integer incompatible with java.lang.Long
    Message not found. Application: AZ, Message Name: AZW_FWK_USER_ROW_EXCEPTION. Tokens: VONAME = Scores; KEY = Score Model Id = 'null'
    ; EXCEPTION = oracle.jbo.RowCreateException: JBO-25017: Error while creating a new entity row for ScoresEO.
    java.lang.Integer incompatible with java.lang.Long
    Message not found. Application: AZ, Message Name: AZW_FWK_USER_ROW_EXCEPTION. Tokens: VONAME = Scores; KEY = Score Model Id = 'null'
    ; EXCEPTION = oracle.jbo.RowCreateException: JBO-25017: Error while creating a new entity row for ScoresEO.
    java.lang.Integer incompatible with java.lang.Long
    Message not found. Application: AZ, Message Name: AZW_FWK_USER_ROW_EXCEPTION. Tokens: VONAME = Scores; KEY = Score Model Id = 'null'
    ; EXCEPTION = oracle.jbo.RowCreateException: JBO-25017: Error while creating a new entity row for ScoresEO.
    java.lang.Integer incompatible with java.lang.Long
    Message not found. Application: AZ, Message Name: AZW_FWK_USER_ROW_EXCEPTION. Tokens: VONAME = Scores; KEY = Score Model Id = 'null'
    ; EXCEPTION = oracle.jbo.RowCreateException: JBO-25017: Error while creating a new entity row for ScoresEO.
    java.lang.Integer incompatible with java.lang.Long
    Message not found. Application: AZ, Message Name: AZW_FWK_USER_ROW_EXCEPTION. Tokens: VONAME = Scores; KEY = Score Model Id = 'null'
    ; EXCEPTION = oracle.jbo.RowCreateException: JBO-25017: Error while creating a new entity row for ScoresEO.
    java.lang.Integer incompatible with java.lang.Long
    Message not found. Application: AZ, Message Name: AZW_FWK_USER_ROW_EXCEPTION. Tokens: VONAME = Scores; KEY = Score Model Id = 'null'
    ; EXCEPTION = Updates are not supported by this API.
    74 rows processed, now posting changes to the database ......
    Transaction committed.
    Processed API:AR_CMGT_Scores
    Status: WARNING
    Concurrent program completed.
    +---------------------------------------------------------------------------+
    Start of log messages from FND_FILE
    +---------------------------------------------------------------------------+
    +---------------------------------------------------------------------------+
    End of log messages from FND_FILE
    +---------------------------------------------------------------------------+
    +---------------------------------------------------------------------------+
    Executing request completion options...
    Finished executing request completion options.
    +---------------------------------------------------------------------------+
    Concurrent request completed
    Current system time is 09-OCT-2013 03:15:50
    +---------------------------------------------------------------------------+

    Vivek,
    Thanks for the update.
    Regards,
    Hussein

  • [Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messa

    Error
    [Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009.  There
    may be error message
    I am using BIDS Microsoft Visual Studio 2008 and running the package to load the data from excel .
    My machine has 32 bit excel hence have set property to RUN64BITRUNTIME AS FALSE.
    But the error still occurs .
    I checked on Google and  many have used Delay validation property at Data flow task level to true but even using it at both excel connection manager and DFT level it doesnt work
    Mudassar

    Thats my connection string
    Provider=Microsoft.ACE.OLEDB.12.0;Data Source=E:\SrcData\Feeds\Utilization.xlsx;Extended Properties="Excel 12.0;HDR=NO";
    Excel 2010 installed and its 32 bit edition
    Are you referring to install this component -AccessDatabaseEngine_x64.exe?
    http://www.microsoft.com/en-us/download/details.aspx?id=13255
    Mudassar
    You can try an OLEDB provider in that case
    see
    http://dataintegrity.wordpress.com/2009/10/16/xlsx/
    you might need to download and install ms access redistributable
    http://www.microsoft.com/en-in/download/details.aspx?id=13255
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • BPC Installation :Errors in the metadata manager

    Hi All,
    We are trying to install BPC MS 10 and getting an error message during the installation: 'Errors in the metadata manager. Either the database role with the ID of 'EnvironmentShell Role' does not exist in the database with the ID of 'EnvironmentShell', or the user does not have permissions to access the object.'
    Here is Logs:
    ==============[System Error Tracing]==============  [System  Name] : OLAPServerHandler  [Message Type] : ErrorMessage  [Job Name]     : Olap9Manager : DeleteRole  [DateTime]     : 6/11/2014 5:07:07 PM  [UserId]       :   [Exception]       DetailMsg  : {Microsoft.AnalysisServices.OperationException: Errors in the metadata manager. Either the database role with the ID of 'EnvironmentShell Role' does not exist in the database with the ID of 'EnvironmentShell', or the user does not have permissions to access the object.      at Microsoft.AnalysisServices.XmlaClient.CheckForSoapFault(XmlReader reader, XmlaResult xmlaResult, Boolean throwIfError)     at Microsoft.AnalysisServices.XmlaClient.CheckForError(XmlReader reader, XmlaResult xmlaResult, Boolean throwIfError)     at Microsoft.AnalysisServices.XmlaClient.SendMessage(Boolean endReceivalIfException, Boolean readSession, Boolean readNamespaceCompatibility)     at Microsoft.AnalysisServices.AnalysisServicesClient.SendExecuteAndReadResponse(ImpactDetailCollection impacts, Boolean expectEmptyResults, Boolean throwIfError)     at Microsoft.AnalysisServices.AnalysisServicesClient.Delete(IMajorObject obj, ImpactDetailCollection impact, Boolean ignoreFailures)     at Microsoft.AnalysisServices.Server.Delete(IMajorObject obj, ImpactDetailCollection impactResult, Boolean ignoreFailures)     at Microsoft.AnalysisServices.MajorObject.DropPrivate(DropOptions options, XmlaWarningCollection warnings, ImpactDetailCollection impactResult, Boolean analyzeImpactOnly)     at Microsoft.AnalysisServices.MajorObject.Drop(DropOptions options)     at Osoft.Services.Platform.YukonAdmin.Olap9Manager.DeleteAllRoles(String strDBName, String& strMsg)}  ==============[System Error Tracing  End ]==============
    Did you have any idea?
    Thank you in advance.
    Regards,
    Wafa

    Hi Roberto,
    Thank you for your answer.
    I can complete the installation by clicking on the 'OK' button. As if the error is ignored by the system during the installation.
    But, after the installation is completed, the deployment of the OLAP cube with (with restore) is not working. we get an error message. I think it is related to the first one.
    Is it mandatory to restart the Send Governor after the installation?
    Thank you very much for your help!
    Regards,
    Wafa

  • PowerView Errors in the metadata manager. The current model can only be expressed when the client is requesting tabular view metadata with VERSION restriction of 2.0 or later

    SQL 2012 SP 1 CU4 applied. Now getting " Errors in the metadata manager. The current model can only be expressed when the client is requesting tabular view metadata with VERSION restriction of 2.0 or later"
    Any ideas what could be causing it to send the incorrect version?

    amaltsev1,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Setup WIzard error. Unable to connect to the Router.

    All the connections are correct.  I am able to connect to IE and FireFox with ethernet and connected my nook via 'Linksys'.  I opened using ISP address and set up security.  Is there more in the setup that I need to do?
    Solved!
    Go to Solution.

    Hi. Are you still getting that error after you setup everything on the router? Is wired internet working already? Are you replacing an old router? If you still encounter that error, you can download the updated software version for your router. It is best to wire your computer directly to the modem for that and run it from there. You may have to reset the router back to defaults by pressing its reset button down for 15 seconds so that you can start afresh with the setup. I have here a link for you that might help you regarding the software:
    Cisco Connect error codes
    http://homekb.cisco.com/Cisco2/ukp.aspx?vw=1&docid=8c48ffab84714adb992ca2bf5dd9a529_Cisco_Connect_Er...

  • Installation and Connection Error with Desktop Manager and Curve 3G

    I just installed Desktop Manager 6.01 and then tried connecting my Curve 3G to the system using the accompanying USB cable.. But there was a connection error.. so i did a bit searching on the net and went to (http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB00125)  which gave me a solution to install m\y driver.. But when i try to manually install my driver, it shows an error   "THE SERVICE CANNOT BE STARTED, EITHER BECAUSE IT IS DISABLED OR IT HAS NO ENABLED DEVICES ASSOCIATED WITH IT"  now the USB is working because my phone is being recognised by the laptop and moreover in the device manager od my Vista, Blackberry is being shown... I cn see in drivers that Drivers have been installed but the drive Information such as Version, date is not available and the driver is unsigned...  
     Can someone tell me what exactly might the problem?? any reply will be appreciated..

    I encountered the same issue, Not sure if you'll have the same results, but all i did was enable windows updates, and did an automatic driver update from the web (as in from windows updates) and after a reboot, all was back to normal.
    hope that helps,

Maybe you are looking for