Metadata replication popup when installing BI content in 7.4

When I select an object to install with grouping "Data Flow Before", I am constantly presented with the attached window, which I either have to cancel or accept, during the object collection process. This occurs multiple times (up to 20, 30, or more) depending on the complexity of the data flow of the object, regardless of whether I accept, cancel, or accept with different options. My guess is that I'm being prompted for each DataSource that is encountered in the collection process, but the window only indicates the source system. Is there some setting or note I need to apply so that I can just accept once - it is making the content installation process take a lot longer than I had expected. Just to emphasize, this is on the object collection step and not the actual installation.
I am on BW 7.4 SP7 with BI Content 757 installed. I have replicated all datasources from my ECC source system (content and active).
Any tips or suggestions are appreciated.

Hi Nathan,
Even i faced this issue and searched online but did not get the answer so for others who face same issue, try out below process to resolve it.
The metadata from SAP source systems is independent of BW metadata. There is no implicit assignment of objects using same names. In the source system, information is only retained if it is required for data extraction. Replication allows you to make the relevant metadata known in BW so that data can be read more quickly. The assignment of source system objects to BW objects takes place exclusively and centrally in BW.
While creating Sap Src system connection in BW a popup would be encountered whether to replicate Metadata or only activate the connection.In your case the replication was not chosen and only activation was done hence encountering the error.The solution would be, under sap src system context menu, choose activate and when the same popup appears choose replicate as well. This will resolve the issue.

Similar Messages

Error when Installing Business Content BW 3.5

Hello Everyone,
When I "Drag n Drop" the infocube 0PS_C021, it shows following errors :
Object 0EMPLOYEE_EDUCATION (InfoSource,ISTD) could not be collected for object PA-PA-IO (Application,APCO)
Message no. RSO296
Diagnosis
You have collected objects in the BW Metadata Repository. Associated objects for the object PA-PA-IO of type Application,APCO have also been collected. Object 0EMPLOYEE_EDUCATION of type InfoSource,ISTD was among these objects. This object 0EMPLOYEE_EDUCATION of type InfoSource,ISTD, is not, however, available in the Metadata Repository.
Object '0EMPLOYEE_EDUCATION' (ISTD) of type 'InfoSource' is not available in version 'D'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name '0EMPLOYEE_EDUCATION' (in transport request ISTD) of type 'InfoSource' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version D. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
Please help me to solve these problems.
Regards
Sanjiv

Hi Sanjiv,
Check the below thread:
Error when Installing Business Content BW 3.5
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fbabd936493ee7e10000000a1553f7/content.htm
Reg
Pra

Error occurs when installing bi content

Hi Guru's
Can any one help me to find the solution for this error when installing bi content.
We started with installing the required info objects for the query 0QM_C12_Q0001 (Inspection Results: Stability Study), but unfortunately the installation process fails with the error message u201CCannot access file /usr/sap/trans/tmp/TRAHASCK.LOSu201C. Please help
Thanks in advance

Hi ,
If you double click on the error message "/usr/sap/trans/tmp/TRAHASCK.LOSu201C there should be an error code given, can you
let us know what the error code is?
Best Regards,
Des.

Datasources Missing when Installing Technical Content for BI Admin Cockpit

Hi,
I have installed the Technical Content for BI Admin Cockpit in our QA systems, for BI7, using SPRO, and it seems that there are some missing datasources, transfer rules, etc.,
The one's that are missing are:
=> 0TCTPRCSVAR_TEXT
=> 0TCTPRCSVAR_ATTR
=> 0TCTBWOBJCT_TEXT
=> 0TCTBWOBJCT_ATTR
Does anyone know if this is a known issue, that these are not available?
Please let me know if they're required, and if there's a fix to get them back.
Thanks,
John

Hi John,
In my system the symptom is the same. So I just installed them myself in RSA1->BI Content.
I don't think it's a big problem because the queries on the MultiProviders can run without these master data. For example, you may find the text of query is missing but you can see query's technical name.
I remember when I activate 0TCTBWOBJCT_TEXT and 0TCTPRCSVAR_TEXT, these datasources are in BI 7 version but there's no transformation. So I create myself.
Please let us know if you have other questions.
Regards,
Frank

Errors when installing business content

hi gurus,
when i am trying to install cube 0fiap_c03 i am facing these errors.i trying in simultion mode
the errors r
1.Object DataStore Object 0FIAP_O03: Merge with the Content Version
InfoObject 0FI_DSBITEM is not available in version A
2.Installation (simulation mode) of: InfoCube (CUBE)
InfoObject 0CLEAR_DATE is not available in active version
like this it is giving 32 objetswhich r not available in content version
3.Key figure 0GLACCEXT is not available in version D
Error while reading InfoProvider 0FIAP_O03
how to sort this out.
thanks
sridhar

Dear Sri
I hope You have selected the option "Data Flow Before".
I used to get these errors and I just ignored it.
If at the time of extraction if you find any problem then you have to go to SAP site and you can find the correct Content.
Try to activate the Transfer Rules and Update Rules and if you find any problem then you can look back.
Regs
Gopi.
Message was edited by: Gopi
Message was edited by: Gopi

Missing datasources when installing Business Content

Hi All
We have a requirement for a number of SBC infoproviders (BI7/ECC6) which are new to us.
The majority we have installed successfully but we are having problems with 0SLL_C01 / C02 and C03 which relate to Customs and 0BVTSD02 which is a Telephones Sales Acitivity DSO from the Beverage Industries area.
We have 'successfully' installed all the data flows down to the infosource level but none of the datasources were installed.
On re-checking in our source system RSA5/RSA6 we realised there were no datasources available for these infosources.
How do you add business content datasources to your source system so they are available? or have we missed a process?
Thanks
Jerry

Hi Jerry,
The Datasource you are talking about is related to release of SAP GTS 3.0 pack.
So please check with you basis team whether they have installed this plug-in in your source system.
If these release /plug-in are not installed in your sourcce system you wont be able to finf it in the RSA5/RSA6.
Thanks and Regards
Arun

Error when installing Integration content- Could not create java

Hi all,
when i been installing the integration comp. in a server win 2005 32 bits, the installer give the next error: coul not create java virtual machine.
i try desintaling and installing jvm 1.5 like manual, and i dont know why happens this error.
help please-
is bussines one 8.8 pl 19
regards
Humberto

Humberto,
Try downloading the latest version of the Business One framework for 8.8 or the latest version of B1iSN 8.8 which will load Tomcat 6 and well as Java 6 and see if that helps.
Eddy

Get red error when installing Vendor number (purchasing view) - 0VEN_PURORG

On BW 3.5, when installing Business Content of the InfoObject 0VEN_PURORG (Vendor number (purchasing view)), get the following red error:
"Mapping between 0BPARTNER_ATTR R3_System_Name 0BPARTNER_ATTR is inconsistent"
What does that mean and how to have it fixed? Even if the red error shows up during the installing, but I can still use RSD1 to modify it though.
Thanks

Kevin,
Try using 'Only Necessary objects' option and try. If the '0BPARTNER' attribute is not directly related to
'0VEN_PURORG' Info object, you should be fine.
Thanks

Error when installing "contents of this disk cannot be changed".

I'm getting this error when installing Snow Leopard, 'The contents of this disk cannot be changed'.
Any ideas?

Install 10.5.8 COMBO update, then try SL.

Error when installing issue in Content Viewer

Hi,
I have a strange error in my Content Viewer.
When downloading it stalls and a message says "Could not install issue, relaunch app and download your purchase again" (my translation from swedish).
It sometimes stalls when downloading and sometimes when installing issue.
Anyone got a solution or having the same problem?
Br
Henrik

Henrik, this can be either or. The internal Acrobat.com servers seem to have download issues once a week or so.
The best way I think you can determine this is if the download is failing at the same point during the download. If it is, it's a problem with the folio. If it's not, then it's a temporary problems with the servers.
If it is a problem with the folio, there's no straightforward answer -- but if you were able to download that folio recently, delete or update the articles you've added since.
If you have no idea what's causing it, you can either start deleting articles, or try updating them first.

When installing maverick mailboxes disappeared, only have current emails. All the folders and content missing. Could anyone be of help. I do have Time Machine for backup.

When installing maverick mailboxes disappeared, only have current emails. All the folders and content missing. Could anyone be of help. I do have Time Machine for backup.

Solved the problem by clicking the gray triangle next to "On My Mac" and drilled down!

How do I stop in constant popups to install flash play when I already have the latest version?

How do I stop the constant popups to install flash player on my computer? I mean constant. I already have the latest version.

http://forums.adobe.com/thread/1195540

Source System Assignment while Installing Business Content

Hi,
I have a new R/3 source system in BW (one R/3 system already exists). When I'm installing business content for say an Infosource and before, even with a succesful install , the new source system assignment is not taking place in the infosource and neither are the packages (for the new source system) being installed. The datasource (for the new source system) remains unassigned.
Please Advice
Thanks

Hi Shurobhi
with your new R/3 source system are you able to see the datasources - using right clik on source system & then select datasources overview. IF not then you need to check if the source system connection is done with metadata repository replication or not. If that is also done then ensure that you have installed all business content datasources using RSA5 in your R/3 system.
On BW side, while installing transfer rules and infopackages, make sure that this new R/3 source system is checked on in source system Box - X icon on business content screen. Then only you would be able to see transfer rules and infopackages & install them.
Hope this helps
Regards
Pradip

Errors installing BI Content for LES (Logistic Execution System)

I am on BI 7.0 SP17 and BI Content 703 level 09.
I am trying to install BI Content for LES - cube 0LES_C01. However there are no updated components for Datasources, DTP etc. Only 3.x infosources etc.
Does this mean that none of the BI Content for LES is upgraded for BI 7.0?
When I try the simulation, I get errors relating to the update rules - 'Error installing update rules'. These are 3.x rules anyway, should I ignore these errors?
Any advice appreciated.

hi,
Make sure KEY1 Infoobject is available in your metadata repository or in RSD1.The transfer structure is looking for this field.
First install KEY1 and then try to install other business content.
Please see the link below,
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/content.htm
Thank you
Arun

Error installing Business Content: InfoObject Catalogs

hi all,
just new in this community and hope you can help with my encountered problem regarding Installation in BI content.
I'm trying to activate:
InfoObject Catalog (technical name) : 0CHANOTASSIGNED
InfoObject Catalog(description)        : Unassigned characteristics
upon installation here is the job log that i got:
Message text | Message class | Message no. | Message type
Replication completed successfully | RSAOLTP | 33 | S
Replication completed successfully | RSAOLTP | 33 | S
The object R3TR ISTS 0CUST_CLASS_TEXT_BA does not exist | TK | 233 | S
Assign a package | TR | 709 | S
Specify the package or flag it as a local object | TR | 742 | E
Job cancelled after system exception ERROR_MESSAGE | 00 | 564 | A
what seems to be the error here?
thanks and regards,
karl

hi chintamanim,
thanks for the response.
i verified the objects included on the BI content objects window and noticed that the object 0CUST_CLASS_TEXT "active version" is not available and i tried finding 0CUST_CLASS_TEXT_BA and cannot find it.
does this have an effect on the error i got from activating and receiving the error upon activation?
The object R3TR ISTS 0CUST_CLASS_TEXT_BA does not exist
I did follow a document for Building Block Configuration Guide:
B03: General Settings for BI Integration
and the step is included here:
Activating Business Content: InfoObject Catalogs:
1.     On the Data Warehousing Workbench: Business Content screen:
a.     At the top of the right hand frame, choose Grouping and select In Data Flow Before.
b.     At the top of the right hand frame, choose Collection mode and select collect automatically.
c.     In the left hand frame, select Object Types.
d.     In the middle frame, expand InfoObject Catalog and make a double-click on Select Objects.
2.     In the Selection of Query Objects dialog box.
a.     Select the following InfoObject catalog:
0CHANOTASSIGNED
b.     Choose Transfer Selections.
c.     If a dialog box Remote Activation in the Source System <> occurs, choose OK and log on to the source system on the following screen.
d.     If a dialog box appears Exceeded runtime when collecting objects choose Continue.
3.     At the top of the right frame, choose Install and select Install in Background.
4.     In the Install Business Content in the Background dialog box choose Yes.
5.     In the Information dialog box choose Continue.
6.     Choose Exit.
please advise on how to continue.
thanks and regards

Metadata replication popup when installing BI content in 7.4

Similar Messages

Maybe you are looking for