Metadata Repository Creation Assistant fails with ORA-01119
<!--[if gte mso 9]><xml>
Normal
0
</xml><![endif]-->
Hi All,
My DB version is 10.1.0.2 and I've upgraded the same to
10.1.0.4.2
In order to install B2B, I started off by installing the
Metadata Repository Creation Assistant.
After the initial steps, I got the following message:
<h5>
OracleAS RepCA was not able to find the Oracle Text Supplied
Knowledge Base in the database specified. </h5>
<h5>If you are planning to use this repository for installing
OracleAS Portal, you have to install Oracle Text Supplied Knowledge Base.
Oracle Text Supplied Knowledge Base can be installed in the database using
Oracle Database 10g Companion CD.</h5>
<h5>
If you are not planning to use this repository for
installing OracleAS Portal, you may continue further. Continue? Yes/No?</h5>
I continued with "Yes" and I chose the storage option as
"Regular or Cluster File system". In the next step -<strong>Specify Tablespace
information</strong>, I chose to install it in the C:\ , where there was approx 18GB
of free space. Yet, I encountered the following error:
<h5>
Unable to create tablespace. Please see the OracleAS RepCA
log file for more details.</h5>
<h5>ORA-01119 error in creating database file 'string'</h5>
<h5>Cause: Insufficient space on device or invalid database file
path.</h5>
<h5>Action:</h5>
<h5>a) Verify the database file path specified.</h5>
<h5>b) Decrease the size of the requested file or allocate a
file on another device with more available space. If a file size was not
specified in the statement, then specify a file size smaller than the available
space on the device.</h5>I have verified the database file path. I also tried
decreasing the size. I further tried using another directory where there was
11GB of free space. It still didn't work.
Please HELP!
-Suhas.
Hi Suhas,
Can you please do the following?
1. Please try pointing to C:\b2b.dbf file during installation and see if the installation goes fine or not.
Regards
Vipin R.S
Similar Messages
-
I am trying to Install Portal Forms Reports 11, so I had to Install all prerequisites
My Machine Specifications:-
1- Oracle Enterprise Linux 5.5 x86-64
2- DB 11g R2
3- WebLogic 10.3.3 (X64)
4- Oracle Identity Management 11.1.1.2.0
I was executed the inspre11.pl with -op1
than I was trying to Install SSO Metadata Repository Creation Assistant (10.1.4.3.1)
in the last step (Step 7 - Loading Repository)
http://lh3.ggpht.com/_bMH90GEkTL4/SwW1jlNHzFI/AAAAAAAABjE/ZZm55usPKu0/s1600-h/clip_image054%5B3%5D.jpg
I encountered this error :-
ERROR - Unable to connect to the database. See the log file for details. Check that you have provided the proper service name for the database, that the database is running, the database connection information is valid, and that the database is set up for password file authentication. For more information, click the Help button.:ORA-06550: line 1, column 7:
PLS-00201: identifier 'DBMS_IAS_VERSION.SET_COMPONENT_LOADING' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
what can I do ? my Database is start up and the connection is OK !!!!!!!!!!!
I followed the oracle documentation:-
Installation Guide for Oracle Identity Management 11g Release 1 (11.1.1) E12002-02 October 2009
now we are going to 2011 !!!!!!!!!!!!!!!!!!!
Is there another newer Installation guide from oracle?
thank youGood question, rozester.
I encountered this problem also, while trying to install the SSO MRCA 10.1.4.3.1 on 64-bit RHEL5 (though it's at version 5.7 but I'm positive that won't make any difference to the result).
This may or may not match your situation, but when I looked in the log file $ORACLE_HOME/assistants/repca/log/repca_<datestamp>.log, I saw what was probably the reason behind the error:
<$ORACLE_HOME>/bin/sqlplus: error while loading shared libraries: libclntsh.so.9.0: cannot open shared object file: No such file or directory
I think I remember seeing that the link operation during installation had failed, but I hoped it would be OK. And it possibly would have been, if I'd remembered to specify the destination database Oracle home rather than the SSO MRCA Oracle home when prompted (on the page where it asks for database home and log file path). Perhaps then it would have used the sqlplus binary from the database oracle home, and since that one definitely works, it might have worked. But before I thought of that, I did a workaround; I installed the SSO MRCA on a 32-bit RHEL5 box (using the same directory paths) and copied the shared library files to the 64-bit box's shared library directory via scp as follows:
cd $ORACLE_HOME/lib; scp -pr * oracle@rhel64box:$PWD/
When I re-ran $ORACLE_HOME/runRepca, it then worked without error. Another thing I could have tried is just running runRepca on the 32-bit RHEL5 box, and that probably would have worked too, but it probably would have been a lot slower compared to running it locally on the destination server; it's takes quite a while as it is.
Hope this helps. I'm sure it'll help me if next time I do this I forget what I did before and go searching again ;-) -
Invalid log directory in Metadata Repository Creation Assistant
Hi all,
I have on my laptop with OS Vista 64bit installed database version 10.2.0.3.0 and standalone AS (resp. whole SOA Suite) version 10.1.3.3. I wanted to install and configure OID not to separate, but to existing database. At first, I downloaded and successfuly installed Metadata Repository Creation Assistant (as_windows_x86_mrca_101401_disk1/2.zip). But when I run Oracle RepCA, in step 1 of 2: Specify Oracle Home Path, I get error Invalid log directory.
As Oracle Home Path I typed D:\oracle\product\10.2.0\db_1 (as it is in registry)
As Log File Directory I tried D:\product\mrca\assistants\repca\log, D:\log etc.
Could you help me, how to solve it?
Thanks,
PeterThere is a Patch for Windows Server 2008.
-->
Patch 7497474
Description: 10.1.4REPCA ON WIN 2008: NOT ABLE TO LOAD SCHEMAS USING REPCA INTO THE DB
For me it was the solution. Install the patch (follow the instruction in the readme.txt)
After that the RepCA accepts the Log File Directory. -
CD2 of Metadata Repository Creation Assistant (10.1.2.0.3) bad
Top Url of Page reads: http://www.oracle.com/technology/software/products/ias/htdocs/101202.html
CD2 of the Metadata Repository Creation Assistant (10.1.2.0.3) downloads fine and my cksumm of the file matches what I see on the download site of:
688884944 104409600 as_hp_risc_mrca_101203_disk2.cpio
However when I try to cpio in the file, I get the following error:
Disk2/stage/Patches/oracle.rdbms.hybrid/9.2.0.6.0/1/DataFiles/group.jar
End of volume
errno: 25, Can't read input
So if I could have you send me the correct cpio file at [email protected] it would be most helpful.
Thanks,
RonI ended up ordering the full HP 10gAS R2 disk set to get this. Would be nice if someone from Oracle would respond about the bad file though.
-Ron -
OAS 10g metadata repository creation assistant & database version issue
Hi,
I have to install Oracle Application Server 10.1.2.0.2 on a server which already has an Oracle database 11g running on it and I dont want to install another database due to the load factor. I am not sure if I could use that database
(version 11g) for the metadata repository. I know that we can use an existing database for the creation of metadata repository using the metadata creation assistant but I am a bit worried about the version of the database which is 11g whereas the application server and the metadata creation assistant both are 10.1.2.x.
Your help is highly appreciated.
Cheers,
OmerMRCA 10.1.2.0.2 cannot be used to install a repository in an 11g database. If you want to use MRCA 10.1.2.0.2 with an 11g database, you will need to install a 10g database first, create the metadata repository and then upgrade the database to 11g. Not applicable in your environment as you already have a 11g database.
Regards,
EJ -
Metadata Repository Creation Assistant cannot connect SYS
Hi!
I have Oracle10.2.0.1.0 running on Oracle EL4. ORACLE_HOME is /opt/app/oracle/product/10.2.0/db_1 and ORACLE_SID is "orcl".
I have installed MRCA in /opt/app/oracle/product/10.1.4.0.1/mrca. After installation, I run MRCA with /opt/app/oracle/product/10.1.4.0.1/mrca/runRepca. When I get to the section to enter connection information, I enter the SYS password but it fails to connect.
I can go into sqplus and do sqlplus /nolog , and then do connect / as sysdba (as user oracle). That works. However, I have the administrator client software installed in /opt/app/oracle/product/10.2.0/client_1, and when I launch "oemapp control" I cannot connect sys as sysdba (I get an insufficient privileges error).
Please help!there are prerequisits to RepCA, did you check all of them?<<To be honest with you, no.
The OAS MRCA User's Guide has over 25 pages of install requirements (Sections 1.3, 1.5 and 1.6, and surprisingly, the section for installing RepCA, 1.4 comes before the requirement sections for the database and OID), with lots of rabbit trails to follow (for steps here, go here; this stuff is discussed over there, etc) to follow before you can get the whole picture.
In all fairness to Oracle, there's plenty of information there in the docs, not just in a well organized manner, IMHO. Of course, complexity helps Oracle University fill up training sessions. :) For someone who simply wants a cookbook to get up and running in as short a timeframe as possible so that s(he) can start doing work with these technologies (for example, a Java developer that doesn't need/care to know about Oracle DB administration but that needs access to a DB or Portal instance to work on his/her projects but has no access to a DBA resource) following a long trail of docs, release notes, addendums, and interspersed bits of knowledge is just running out of luck.
So what I did is, since RepCA runs its own requisites check when you launch the installer, and my intended install met all of them (except shmmax being like 4GB; my system only has 3GB) I went with that. With help from this forum I was able to figure out how to proceed with the install... now the message about RepCA not supporting Oracle DB 10g 10.2.0.1.0... on Oracle EL4... if it doesn't work I don't know yet what I'm going to do. I've spent significant time working through the matrix to identify a set of components that can happily live with each other and allow me to do some work!
Thanks for your input. I'll follow the link and be more patient and read more (on the prerequisites) and hopefully I'll be able to navigate the maze in order to help out another newbie tomorrow.
Thx! -
Installing of Grid Control failed at Repository Creation Assistant
I have a "clean" Windows Server 2003 machine (formatted hard disk, installed the OS and applied all service pack and critical system updates). I was trying to install Oracle Grid Control 10.1 for Windows.
Everything went OK until it reached the "Configuration Assistants" step. The "Enterprise Manager Repository Creation Assistant" step was failed. I looked into the log file and saw messages like this:
-------------------- (start) -------------------------
"'stty' is not recognized as an internal or external command,
operable program or batch file."
Getting temporary tablespace from database...
Could not connect to SYS/(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=76.44.2.169)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=emrep.44.2.169))): ORA-12541: TNS:no listener (DBD ERROR: OCIServerAttach)
Repository Creation Failed
Repository Creation Assistant Failed
-------------------- (end) -------------------------
This got me puzzled. What problem could this be?
I realized that I was using DHCP, and I am now in the process of installing a loopback network adapter. But is there any other area I should check too?
DeecayThis ierror mean listener is not running ,start the listener and try again.
-
Oem 12.1.0.3 installer fails with ora-01017
Greetings,
I am attempting to upgrade my OEM 12.1.0.1 installation to 12.1.0.3. I am following the instructions in the Oracle Enterprise Manager Cloud Control Upgrade Guide and Oracle Support Note 1568143.1. I have verified that all prerequisites are met and have installed patch 11061801 to the repository. The repository and OMS are on different machines. The 12.1.0.1 installation is able to connect to the repository, it has been running successfully for some time now. On the OMS server I stopped the OMS and the Agent and I invoke the 12.1.0.3 installer. I follow the steps and when it gets to the connection page it fails with ORA-01017. The messages are shown -
1. Verify if the SYS password you entered is valid.
2. Verify if the database initialization parameter REMOTE_LOGIN_PASSWORDFILE is set to either Shared or Exclusive.
3. Verify if a password file with the file name orapw<SID> exists in the <ORACLE_HOME>/dbs directory.
All conditions are met:
-bash-3.2$ echo $ORACLE_SID
oemrepos
SQL> connect sys as sysdba
Enter password:
Connected.
SQL> connect sysman
Enter password:
Connected.
SQL> show parameter remote_login_passwordfile
NAME TYPE VALUE
remote_login_passwordfile string EXCLUSIVE
-bash-3.2$ ls -l $ORACLE_HOME/dbs/orapwoemrepos
-rw-r----- 1 oracle dba 1536 Jan 30 2013 /usr/local/oracle/app/oracle/product/11.2.0/dbhome_1/dbs/orapwoemrepos
I am able to connect remotely from another machine. sqlplus is not installed on the OMS server.
I am completely stumped and in need of assistance. Searching the web only indicates that I need to insure that the above listed conditions should be met, they are. If anyone has any suggestions I would appreciate the help.
Thank you.
Bill WagmanOn repository server , can you login as sys user ?
Try to connect through listener and share the result.
sqlplus sys/<password>@<connectstring> as sysdba
Thanks
Rajesh -
Hi Folks
Application cloning is failing with "ORA-12505: TNS:listener does not currently know of SID given in connect"
Database cloning is completed successfuly . database cloned in two nodes node1 and node2
Now cloning applicatino tier with above cloned database nodes but faicing above issue .
ThanksThere are many reasons why an ORA-12505 might be raised at applications cloning. For anyone on this board to assist, you will have to post the log file detail or list the clone execution file which raises this exception.
Thanks,
Arif. -
Financial Statement Generators fail with ORA-01722
We upgaded from 11.5.10.2 to R12.1.3. Since then we have FGSs fail with ora-01722
*+<Moderator edit - deleted MOS Doc content - pl do NOT post such content - it is a violation of your Support agreement>+*
Please refer:
R12: FSG: PERF0005 Error Detected In GET_DEF_LDGS – ORA-01403: No Data Found Common Issues [ID 1368691.1]
R12: RGRARG FSG Completes with Error, rgrsap.rgrsxp: ORA-01722: Invalid Number [ID 579655.1] -
Adcfgclone fails with ORA-04063: view "SYS.DBA_NETWORK_ACLS" error
Hi all,
While running adcfgclone on dbtier if fails with following error
ORA-04063: view "SYS.DBA_NETWORK_ACLS" error
here is the scene:
we are trying to clone a production instance for doing some patching
while running adcfgclone on target (test instance) it fails
our current environment is
application:R12.1.3
db:11.1.0.7
os: rhel 5.6
here is output from
autoconfig file:
SQLPLUS Executable : /u02/testoba/db/tech_st/11.1.0/bin/sqlplus
SQL*Plus: Release 11.1.0.7.0 - Production on Thu Apr 18 09:28:32 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Enter value for 1: Enter value for 2: Enter value for 3: Connected.
PL/SQL procedure successfully completed.
Commit complete.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
adcrobj.sh exiting with status 0
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Services Phase
Running Service Process 2 of 4 for AppsUtil
Executing script in InstantiateFile:
/u02/testoba/db/tech_st/11.1.0/appsutil/install/TESTOBA_testsrv/addbperms.sh
script returned:
addbperms.sh started at Thu Apr 18 09:28:32 IST 2013
The environment settings are as follows ...
ORACLE_HOME : /u02/testoba/db/tech_st/11.1.0
ORACLE_SID : TESTOBA
TWO_TASK :
PATH : /u02/testoba/db/tech_st/11.1.0/perl/bin:/u02/testoba/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/u02/testoba/db/tech_st/11.1.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/u02/testoba/db/tech_st/11.1.0/appsutil/clone/bin/../jre/bin:/u02/testoba/db/tech_st/11.1.0/appsutil/clone/bin/../jre/bin:/usr/lib64/qt-3.3/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oratest/bin:.
Library Path : /u02/testoba/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/u02/testoba/db/tech_st/11.1.0/lib:/usr/dt/lib:/u02/testoba/db/tech_st/11.1.0/ctx/lib
SQLPLUS Executable : /u02/testoba/db/tech_st/11.1.0/bin/sqlplus
Changing permissions for file sqlplus.
Changing permissions for file extproc.
Changing permissions for file tkprof.
addbperms.sh exiting with status 0
.end std out.
.end err out.
AutoConfig Services Phase
Running Service Process 3 of 4 for AppsUtil
Executing script in InstantiateFile:
/u02/testoba/db/tech_st/11.1.0/perl/bin/perl -I /u02/testoba/db/tech_st/11.1.0/perl/lib/5.8.3 -I /u02/testoba/db/tech_st/11.1.0/perl/lib/site_perl/5.8.3 -I /u02/testoba/db/tech_st/11.1.0/appsutil/perl /u02/testoba/db/tech_st/11.1.0/appsutil/install/TESTOBA_testsrv/txkConfigDbOcm.pl
script returned:
Configuring OCM on the Database Tier....
Testing database connection...
Database connection test passed.
Response file /u02/testoba/db/tech_st/11.1.0/appsutil/clone/adclnocm.res required to configure OCM does not exists
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Services Phase
Running Service Process 4 of 4 for AppsUtil
Executing script in InstantiateFile:
/u02/testoba/db/tech_st/11.1.0/appsutil/install/TESTOBA_testsrv/txkcreateACL.sh
script returned:
You are running txkcreateACL.sh version 120.1
The environment settings are as follows ...
ORACLE_HOME : /u02/testoba/db/tech_st/11.1.0
ORACLE_SID : TESTOBA
PATH : /u02/testoba/db/tech_st/11.1.0/perl/bin:/u02/testoba/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/u02/testoba/db/tech_st/11.1.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/u02/testoba/db/tech_st/11.1.0/appsutil/clone/bin/../jre/bin:/u02/testoba/db/tech_st/11.1.0/appsutil/clone/bin/../jre/bin:/usr/lib64/qt-3.3/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oratest/bin:.
Executable : /u02/testoba/db/tech_st/11.1.0/bin/sqlplus
Executing txkcreateACL.sql ...
SQL*Plus: Release 11.1.0.7.0 - Production on Thu Apr 18 09:28:33 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected.
FROM DBA_NETWORK_ACLS
ERROR at line 17:
ORA-06550: line 17, column 8:
PL/SQL: ORA-04063: view "SYS.DBA_NETWORK_ACLS" has errors
ORA-06550: line 16, column 3:
PL/SQL: SQL Statement ignored
Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
txkcreateACL.sh: exiting with status 1
.end std out.
.end err out.
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[APPLY PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /u02/testoba/db/tech_st/11.1.0/appsutil/install/TESTOBA_testsrv
txkcreateACL.sh INSTE8_APPLY 1
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: RC-50014: Fatal: Execution of AutoConfig was failed
at oracle.apps.ad.clone.ApplyDatabase.checkAutoConfigErr(ApplyDatabase.java:3192)
at oracle.apps.ad.clone.ApplyDatabase.runCVMAndAutoConfig(ApplyDatabase.java:3010)
at oracle.apps.ad.clone.ApplyDatabase.doConf(ApplyDatabase.java:649)
at oracle.apps.ad.clone.ApplyDatabase.doApply(ApplyDatabase.java:473)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:366)
at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:110)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:67)
at java.lang.Thread.run(Unknown Source)
please provide any suitable link or doc id or any workaround
thanks
ZaviHi;
Please review:
Adautocfg.Sh Fails With "ORA-01422: " While Executing Txkcreateacl.sh [ID 854746.1]
Database Cloning Failed With txkcreateACL.sh[36]: sqlplus [ID 603297.1]
R12 : Autoconfig script txkcreateACL.sh fails with error ORA-31003: Parent /sys/acls/ already contains child entry OracleEBS.xml [ID 1328458.1]
Regard
Helios -
EXPDP fails with ORA-39125: Worker unexpected fatal error in KUPW $
Hi Friends,
Oracle 10.2.0.4.0 on Sun OS
Im trying to do metadata_only export using EXPDP
Facing the below error
ORA-39125: Worker unexpected fatal error in KUPW $ WORKER.UNLOAD_METADATA while calling DBMS_METADATA.FETCH_XML_CLOB []
ORA-31642: The following SQL statement fails:
BEGIN "SYS". "DBMS_RULE_EXP_RULES." SCHEMA_CALLOUT (1,1,1, '10 .02.00.04.00 ') END;
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.DBMS_METADATA", line 907
ORA-00942: table or view does not exist
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPW $ WORKER", line 6307
PL / SQL Call Stack
object line object
handle number name
51bf5dc20 15032 package body SYS.KUPW $ WORKER
51bf5dc20 6372 package body SYS.KUPW $ WORKER
51bf5dc20 2396 package body SYS.KUPW $ WORKER
51bf5dc20 6944 package body SYS.KUPW $ WORKER
51bf5dc20 1314 package body SYS.KUPW $ WORKER
51c7e8650 2 anonymous block
====================================
Findings:
I check the status of DBMS_RULE_EXP_RULES
OWNER OBJECT_NAME OBJECT_TYPE STATUS
SYS DBMS_RULE_EXP_RULES PACKAGE BODY VALID
SYS DBMS_RULE_EXP_RULES PACKAGE VALID
PUBLIC DBMS_RULE_EXP_RULES SYNONYM VALID
DBMS_METADATA & DBMS_SYS_ERROR packages are valid.
======================================================
Error in the alert:
The value (30) of MAXTRANS parameter ignored.
kupprdp: master process DM00 started with pid=25, OS id=6506
to execute - SYS.KUPM$MCP.MAIN('SYS_EXPORT_SCHEMA_01', 'SYS', 'KUPC$C_1_20120908075037', 'KUPC$S_1_20120908075037', 0);
kupprdp: worker process DW01 started with worker id=1, pid=26, OS id=6633
to execute - SYS.KUPW$WORKER.MAIN('SYS_EXPORT_SCHEMA_01', 'SYS');
when i check the trace file, find the below error
ORA-04063: package body "SCH.COLLECTION" has errors
But when I check the status of the package, it's valid.
Thanks for your help
KSGHi;
Is it full exp? Of yes please review:
DataPump Export Fails With Errors ORA-39125 ORA-31642 ORA-1422 [ID 790988.1]
Full And Schema DataPump Exports Fail With Errors ORA-39125 ORA-31642 During DBMS_SCHED_EXPORT_CALLOUTS.SCHEMA_CALLOUT [ID 1109045.1]
EXPDP FAILS WITH ORA-39125 ORA-31642 DBMS_SCHED_EXPORT_CALLOUTS [ID 445291.1]
Full Database DataPump Export (EXPDP) Fails With Errors ORA-39125 ORA-4045 ORA-1031 On XDB.XDB_PI_TRIG [ID 1102434.1]
Errors ORA-39125 ORA-1801 When Running DataPump Export (EXPDP) [ID 815683.1]
Regard
Helios -
Repository Creation Assistant installation problem
I am following the steps in http://download.oracle.com/docs/cd/E14571_01/install.1111/e12002/sso_das002.htm to install Oracle SSO for OID 11g. In step 3, it require to use RepCA (repository creation assistant) to load SSO so I go ahead to install RepCA but it got a linkage error during the installation. I check the install log and it indicate a missing shrept.lst file. Where does the file come from?
Start output from spawned process:
+/u01/app/oracle/product/10.1.4.3.1/RepCA/bin/genclntsh+
genclntsh: Could not locate /u01/app/oracle/product/10.1.4.3.1/RepCA/ldap/admin/shrept.lst
genclntsh: exiting ...
+make: *** [client_sharedlib] Error 1+
End output from spawned process.
Many thanks
Edited by: user3637555 on Jan 6, 2011 10:50 AMI am following the steps in http://download.oracle.com/docs/cd/E14571_01/install.1111/e12002/sso_das002.htm to install Oracle SSO for OID 11g. In step 3, it require to use RepCA (repository creation assistant) to load SSO so I go ahead to install RepCA but it got a linkage error during the installation. I check the install log and it indicate a missing shrept.lst file. Where does the file come from?
Start output from spawned process:
+/u01/app/oracle/product/10.1.4.3.1/RepCA/bin/genclntsh+
genclntsh: Could not locate /u01/app/oracle/product/10.1.4.3.1/RepCA/ldap/admin/shrept.lst
genclntsh: exiting ...
+make: *** [client_sharedlib] Error 1+
End output from spawned process.
Many thanks
Edited by: user3637555 on Jan 6, 2011 10:50 AM -
CSSCAN for database character set conversion failing with ORA-01578
Hi ,
CSSCAN for database character set conversion failing with ORA-01578: ORACLE data block corrupted (file # 84, block # 23930). please help me out in this regard.
Thanks,
Sravan.Hi Anand,
Thanks for your update. The segment is a table not an index in my case. And i got this error while running CSSCAN on Apps database for character set conversion to UTF8 from WE8ISO8859P1. Please find the snapshot below for your reference.
SQL> select segment_name, segment_type, owner from dba_extents where file_id = 84 and 23930 between block_id and block_id + blocks - 1;
SEGMENT_NAME
SEGMENT_TYPE OWNER
EDW_LOOKUP_M
TABLE POA
SQL> ANALYZE TABLE POA.EDW_LOOKUP_M VALIDATE STRUCTURE CASCADE;
ANALYZE TABLE POA.EDW_LOOKUP_M VALIDATE STRUCTURE CASCADE
ERROR at line 1:
ORA-01578: ORACLE data block corrupted (file # 84, block # 23930)
ORA-01110: data file 84: '/d911/oracle/dbcondata/poad01.dbf'
Thanks,
Sravan. -
SRVCTL START DATABASE FAILS WITH ORA-00119
Hi,
My DB version is 11.2.0.2.3
I am able to start the DB thorough sqlplus as conventional way.But when I am trying to start using SRVCTL it gives the following errors:
CRS-5017: The resource action "ora.****.db start" encountered the following error:
SRVCTL START DATABASE FAILS WITH ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER_local'
Can you please suggest for any workaround.
ThanksDid you check the TNS_ADMIN? Where does it point to?
Also check if you have all the network files placed under the directory pointed to by TNS_ADMIN.
sqlnet.ora
listener.ora
tnsnames.ora
Maybe you are looking for
-
What is diff b/w valuated and non valuated
hi can anybody tell me what is difference between valuated salesorder and nonvaluated saled order stock thanks prasad
-
Transferring data from water-damaged iphone to replacement iphone
Will/Can Apple download picture, apps, etc. from your water-damaged iphone onto the replacement iphone?
-
Benefit Enrollment (HRBEN0001) Showing Annual instead of PayPeriod Costs
HCM: In the Benefits Enrollment screen, when selecting a particular benefit plan, the Employee and Employer costs for that plan are supposed to display the cost amount defined in the cost rule for that plan and adjusted to the employee's pay period.
-
Trying to find expiration date of my GCU
Hi mods, I read the post that explained it was lost as part of the web shake up for the holidays, but since it isn't back yet, can this be checked by you? I was considering adding another 2 years with the promo on now, but didn't want to extend it t
-
I got an iphone 3g recently and I noticed that a few rows of unused pixels on all sides of the viewing area, more rows of unused pixels on the left than the right. Everything is still functional, but the screen isn't being fully utilized. Any comment