Metafile failed

is anyone else having trouble downloading Flash?

Download the Adobe Flash Player installer directly by clicking one of the following links.
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)
For Mac: Flash Player for Mac OS X

Similar Messages

Flash player metafile file download fails

I keep getting 'Metafile fails to download' message when trying to install Flash player

Download the Adobe Flash Player installer directly by clicking one of the following links.
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)

Users with "metafile download failed" error message

Hello,
I am an Adobe employee working on the issues surrounding the download manager to download Adobe Reader.
The team is aware that some users are having difficulty downloading Adobe Reader due to an error message, "metafile download failed".
If you are one of the users having the problem of "metafile download failed" error message, please send me a private message with your email address so we can contact you.
Thanks,
-Yuko C.
NOTE: to send a private message, click on the User Name to go to their profile page and then use the link to send a private message in the Action panel there.

This is a copy of what was in the other area, I did not see this new post started, sorry.
Week 4 july 2011 reader, flash, shockwave downloaded ok from the download page.
Last week 18 july 2011 when I tried to download, that part of adobe site was down.
Later on in week and today, I am just getting the 'Metafile download failed' message at 33%.
Same new pc's on both occasions ( ie 7, windows xp sp3 behind corporate firewall )
Shockwave seem to download ok.
Reader and flash, instead of coming up with the DLM as previously, is trying to download a file ending .........gtbd_Aih.exe
Has Adobe changed something??
HELP
Jim

Metafile download failed - Flash 11.6.602.180

I have x2 systems that I am trying to install this onto since yesterday morning both with IE9:
Windows 7 Enterprise x86 SP1
Windows 7 64-bit
I select that I do not want Chrome or automatic updates and it just will not install.
I noticed that if I select download the file it is 994kb (which looks like it may only be the installer) not the 15.1mb file that I was hoping for. Would it be possible to have access to the full .exe or .msi please?

Hello,
Welcome to Adobe Forums
You can download Offline installer for Adobe Flash Player from here : http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header
Thanks,
Vikram

Jpeg-export - metafile error - errorcode 2 or errorcode 0

Hello,
i want to export my Report-Sheet as an jpeg from an serial analysis for every step. After the first step the jpeg-export fails with following error message: (in german) "Es befindet sich keinMetafile in der Zwischenablage. Fehlercode 2" or in english: "there are no metafile at the clipboard. error code 2" the failing command looks like this:
for i = 1 to 12
Call PICEXPORT("D:\MFriedrich\" & messname & "Kraftanzeige_" & k & "0kmh.JPG","JPEG",1,1024,,"RGB 24 YUV 444",100,"JPEG",0)
next
The files and folders do exist.
What can i do? I seems, that a temporary picture will not be create at the clipboard.
DIAdem 9.10.2345 ServicePack 2b
WinXP
Modul: Diadem-Script

Hello!
I tried by my computer and could export in a for loop the Report in a JPEG without any error.
Could you post the whole code you are doing in the loop?
So I can try do reproduce the problem
Regards
Ken

HT5655 Feb 2013 Adobe Flash Player Upgrade Install Does not work - metafile issue

I tried uploading the Feb 2013 update without success. Adobe troubleshooting suggested uninstalling existing version of AFP - which I did - still get "Metafile Instalation failed" - now have NO AFP. Adobe says they are aware of the issue and working on it. Any ideas as to how to reupload my old AFP version??

That's great to hear that you were able to find a solution.
I've been trying to fix this issue with Adobe for 5 days now and no one is coming back to me (tried the terminal cd solution and it doesn't work).
Luigi could you expand on where you were directed to find a solution? Running
sudo ./Install\ Adobe\ Flash\ Player.app/Contents/MacOS/Install\ Adobe\ Flash\ Player
has only given me a "command no found" message.
Thanks

Restore Address Book via time machine failed (10.7.3)

Tried to restore my address book (10.7.3), but I terribly failed. What files do I actually have to restore? Tried the all the metafiles (library) and both com.apple.addressbook.plist, but no success. Any help welcome. Cheers, K.

Does it show with the default set to On my Mac? If it got "knocked out" by settng it to "iCloud", it would appear that you have a dataset On my Mac.
If you do find a dataset, it is as well to do a File>Export>iCal Archive to produce a .abbu file and keep it safe. This can be used to import during the procedure I described, to renew the iCloud data. But restoring the folder from TM should work, if you are signed out of iCloud.
If you have since done a TM backup, you may need to look further back for a valid dataset.
You could also try logging in to iCloud.com and see if, in fact, there is a dataset there already.

Failed to export image in image export (ix-8-5-1-linux-x86-64)

Hi,
I am trying to use Oracle OIT Image Export to convert EMF/WMF files to png. And I am trying to run the example "ixsample" in the downloaed SDK.
I got "No valid fonts" error while running the example as below:
./ixsample "../samplefiles/black_shapes.wmf" "../result/test.png"
Creating file: "test.jpg"
EXRunExport() failed: No valid fonts found (0x0B03)
It works if the sample file is "jpg", such as "oivt.jpg" provided in the SDK samplefiles. Anything else should I do to make "wmf/emf" work?
OS: Red Hat Enterprise Linux Server release 6.3 (Santiago)
Thank you.

Hi
This error is arising out of library issue. As per the OI documentation https://docs.oracle.com/outsidein/851/supportdocs/ds_oitfiles_8_4_1.pdf these formats are supported. I have not worked these conversions before; but, searched a bit and found that these fonts are very machine dependent.
Approach 1: Identify the fonts required for WMF and EMF, Find linux compatible version of those and then run the conversions
Approach 2: Run the IBR instance on those windows machine where these fonts are available
Or you can go with other converter's like ImageMagick for conversions
Installing GraphicsMagick
ImageMagick: Advanced Unix Source Installation
You can try these installations
EMF: libEMF: Enhanced Metafile Library
http://www.csn.ul.ie/~caolan/Packages/libwmf.html
This might provide you some pointer
http://www.rohde-schwarz.com/en/faq/fsiq-fonts-for-wmf-files-faq_78704-30023.html

Metafile error

Everytime I try to install flashplayer, it fails to install with the error metafile download failed. What do I need to do?

Download the offline installer from http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header

Bit locker drive encryption failed due to power failer and hard disk corrupted

I ran Bitlocker drive ecryption drive D. My pc is windows 7 ultimate, while it was in progress of 1% due to power failer the encryption failed, when power resume the drive didn't showed the file format nor the size but it shows the size in disk management.
It showed like this in My computer
I do Have the recovery code password and back of recovery password so I ran the "manage-bde-_unlock D:-rp[my code ]
and my pc got hang no other option rather than to press the restart button.
then I used commang "repair-bde -force D:I:-rp[my rp] and following info showed but it stucked in 1% about 8 hours, and there was no increase in the pecentage
I also connected the hardisk to mac but all othe partation showed but didn't showed the encrypted one.
I had lots of memorable picture and other backups so any one kindly help me to get out of this problem. Thanks for help

Hi,
The BitLocker encryption and decryption processes can be interrupted by turning the computer off, and it will resume where it left off the next time Windows starts. This is true even if the power is suddenly unavailable.
Bitlocker-repair (repair-bde) tool
can't repair a drive that failed during the encryption or decryption process.
In addition, could you please explain a bit for what drive you are trying to deal with? external one?
When you first restart your PC, have you seen any signs that indicate that the encryption is in process?
Regarding your scenario, please take a look to see if the following articles could help here:
Scenario 11: Recovering Data Protected by BitLocker Drive Encryption (Windows 7)
Besides, when running manage-bde command, did we followed the steps mentioned in the below article?
Scenario 14: Using a Data Recovery Agent to Recover BitLocker-Protected Drives (Windows 7)
Best regards
Michael Shao
TechNet Community Support

Cannot send email from my Touch (connection to smtp server fails)

Hello,
I have a new iPod Touch with 1.1.4 and the January apps. I am having a problem setting the Mail application.
I am trying to connect to the IMAP/SMTP servers at my university. I am using the exact same settings and passwords I use on my laptop, which works fine. I can receive email fine on my Touch, but every time I try to send one it fails tellings me "the connection to the outgoing server smtp.myuniversity.edu failed".
If I on purpose write a wrong password for the outgoing mail, the error message I get is different ("check the account settings for the outgoing server smtp.myuniversity.edu").
The university IT people confirmed my settings, and told me that there is nothing blocking any handheld device from using the server.
Does anyone know why this would happen?
Thanks,
Marcelo

Thank you very much for your responses
1) the link to mail setup is (sorry, it's quite long)
http://www.knowledgepak.com/kpaksonline/kpol.asp?PiAlias=kpolpi17&k2dockey=04096 3251575739@kpol17&ViewLink=true&SkipHeader=false&printformat=true
2) I am indeed using SSL, as instructed by IT
3) I do use port 587 instead of 25 (25 does not work either)
Any ideas? Thanks again.
MC

BSI ConnectToDataSet...failed

Hi
We have a problem with the BSI, we had been getting a dump "RFC_ERROR_SYSTEM_FAILURE", I followed the SAP Note 1068271 for the debug, and the result is:
=Thu Jan 22 11:53:37 2009
=SAP AG, Walldorf - Business API for BSI TaxFactory 8.0
=RfcAccept called
=Mapping ABAP RFC_PAYROLL_TAX_CALC_US_80 to C function srv_Payroll_Tax_Calc_US_80
=Mapping ABAP RFC_HR_TAXLOCATOR_US_80 to C function srv_hr_taxlocator_us_80
=Waiting for ABAP function calls
=Running function srv_Payroll_Tax_Calc_US_80
=Loading import parameters
=Loading export parameters
=Loading internal tables
=Calling Payroll_Tax_Calc_US
=Running Connect_DB_Payroll_Tax_Calc_US
BSI dataset -> 110
ConnectToDataSource...Succeeded
ConnectToDataSet...failed
Error String -> 7777 - [Oracle][ODBC][Ora]ORA-00933: SQL command not properly ended
=RFC error
operation/code Connect_DB_Payroll_Tax_Calc_US
key RFC_ERROR_SYSTEM_FAILURE
status
message See RFC trace file or SAP system log for more details
internal status
The RFC under sm59 is working fine, the error is on the connection to the Dataset according to the Debug log "ConnectToDataSet...failed".
I don't know what to check about the Dataset, could you please help me?
Best Regards

Yes, it's correct.
I checked it's 8.0.
I think is a problem with the parameters under tf80server.bat.
SET
TF80_CONNECT_STRING=DSN=;UID=;PW
D=;
SET TF80_SCHEMA_NAME=.TF80
REM for SAP trace debugging, uncomment below & see file
errors.txt in gateway working directory
REM C:\BSI\TAXFACTORY\tf80serverdebug.exe %*
REM else for usual operation
C:\BSI\TAXFACTORY\tf80server.exe %*
I don't know what is the "ODBC_DSN_NAME"
I have the user, password, the database name...
Best Regards

Installation of IPC AP 7.0 Jar is getting Failed when uploading in CRM

Hello Experts,
we did some changes in the previosly uploded version of IPC AP 7.0 customer user exit Jar file in eclipse.
While uploading the new modified jar through transaction /SAPCND/UE_DEV in CRM we are getting error :" installation of module <Jar file name > has failed ".
when we checked the logs in SM 53 we seen the below mentioned error:
Message: Exception of type com.sap.sql.log.OpenSQLException caught: Exception of type com.sap.sql.sqlparser.CommonSQLParserException: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE ^ (reason: Modification of ABAP tables is not permit ted)" is not supported
caught: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE ^ (reason: Modification of ABAP tables is not permitted)" is not supported
--> com.sap.sql.log.OpenSQLException: Exception of type com.sap.sql.sqlparser.CommonSQLParserException: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE '^' (reason: Modification of ABAP tables is n" is not suppor ted
caught: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE '^' (reason: Modification of ABAP tables is not permitted)" is not supported
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Ljava/lang/Class;Ljava/lang/String;[Ljava/lang/Object;)Lcom/sap/sql/log/OpenSQLException;(Syslog.java:85)
at
if required i can post the complete stack trace.
any inputs/suggestions are most welcome.
Thanks & regards,
Siddharth

Hi Mark,
Yesterday after Posting the thread we found the same Note ,Issue occured because of JAVA write access was not enabled on the table ,After enabling it as mentioned in SAP Note, Jar file get successfully uploaded.
Thanks for your Help also.
Regards,
Siddharth

Upgrade to ERp6 phase STARTSAP_NBAS error: DDIC login fails

Hi
During an upgrade from 4.7 to ERP6 I get the following error
message in phase STARTSAP_NBAS:
SYSTEM START failed, code -2
-2: the test rfc did not work.
Try to log on to the system with user DDIC
When I try to log on to the system as user DDIC, I get the following
error message:
DB-Error -0
SAP* can log in .The password I submit is correct. I have not changed this password at
any time.
Any ideas are most welcome

Hi,
DB-Error -0 indicate problem with kernel, try to upgrade kernel.
check Note 760175 - 6.20: Logon not possible (after DB export or system copy)
regards,
kaushal

Running workbook from .bat fails to start application missing CORE40 dll

I have been running several workbook via windows task scheduler / vbscript &/or bat files.
I now have a new box which I access thru Remote Desktop Connection, so I can run all these automated updates without having my screen blinking everytime a shedule workbook starts.
If I click on the actual Discoverer icon, or the discoverer workbook shortuct, all works well.
If I click on the .bat file, or try to run the workbook via the cmd , it gives me the following error:
DIS4USR.EXE – Unable To Locate Component
“this application has failed to start because CORE40.DLL was not found. Re-installing the application may fix this problem.”
The dll is under c/orant/bin/core40.dll, which is where I've read it should be, and it works fine in my regular box...
Please help! URGENT :)
Thanks!

Hello
Check the PATH environment variables for the machine you are on and the one you are connecting to.
You might not have Discoverer's objects in the PATH.
Another possibility is that you have more than one piece of ORACLE software on the machine and you may need to also set the ORACLE_HOME within the BAT file.
Best wishes
Michael

Metafile failed

Similar Messages

Maybe you are looking for