Metalink Note: 1011729.6 ?
Hi All,
Can any one please see the metalink note: 1011729.6 and let me know is it right note?
I did not find the 'Report Set' form as mentioned in the note
If that note is right please tell me the process.
We are using 11.5.10.I did not find the 'Report Set' form in the application.
How To Specify the Number of Copies to Print by Report for only reprint/republish?
Thanks,
Raju
Duplicate thread (please post only once):
Metalink Note: 1011729.6 ?
Re: Metalink Note: 1011729.6 ?
Similar Messages
-
Questions on Metalink note 392673.1 (bug 5458753)
I have a few questions on Metalink note 392673.1. This note states that if two schema have objects with similar names and these two schema issue identical statements, it is possible that the statement will run against the wrong schema's object if "a cursor gets reloaded in a certain manner".
Does anyone know any more details? What manner of reloading? Will synonyms prevent the problem? Is there a test case?
Also, the note states that it applies to versions 10.1.0.2 to 10.2.0.3, while the bug claims that it is fixed in 10.2.0.3. Is 10.2.0.3 affected or not?
Paul MullerHi,
It seems that bug is solved in 10.2.0.3 patchset, and interim patch for 10.2.0.2.
Anyway, if you have any question on metalink note, you might have more chance to get a valid answer by asking it into metalink forum, or send an email to the author of the note.
Nicolas. -
How to view all the metalink notes in a single window?
Friends,
I have metalink access...i want to view all the metalink notes in a single shot.
now i am searching the metalink notes by entering the artical id...is there any way to get all the documents in one shot ...
like how we are seeing the forum threads here...
thanksDo you also as a librarian for an overview of all the books? :-)
Have you any idea how much information, knowledge, bug-reports, questions, patch-lists, documentation etc..etc. is on Metalink?
That would give you a list of millions of rows. And how do you want them sorted, by version, by OS, by what??
FJFranken -
Metalink note 399737.1: Is there a 10.2.0.3.0 client?
Metalink Note 399737.1 says that the fix is provided in 10.2.0.3.0 client and further recommends applying a server patch of 10.2.0.2.0 to a client installation.
This is intended to solve "Login With SQLDriverConnect Fails With ORA-00022 Using Oracle10g 10.2 ODBC Driver".
Cause This is a Windows platform only problem.
This has been identified to be caused by
Bug 4991478 COM application not able to connect when using Oracle10g Client 10.2 if using Neutral Threading or Free-Threaded Marshaller, Fails With ORA-21561 / ORA-00022
With fix for
Bug 4937225 ORA-22 from OCIStmtExecute after OCISessionBegin (Not published externally)
the application fails with ORA-21561.
Solution This is fixed in Oracle10g Client 10.2.0.3.
For Oracle10g 10.2.0.2, apply Server patch 10.2.0.2 patch 1 on Client, Patch 5140461 .
References
Bug 4991478 - ORA-21561 / ORA-22 WHEN USING COM NEUTRAL THREADING OR FREETHREADED MARSHALLER
Patch 5140461 - ORACLE 10G 10.2.0.2 PLACE HOLDER BUG FOR PATCH 1 ON WINDOWS 32 BIT
My current client version is 10.2.0.1.0. On applying the patch, I get an error while launching SQL*Plus:
The procedure entry point LpxStreamParseWithDTD could not be located in the dynamic link library oraxml10.
Is there such a client released by Oracle, and is the second option correct?Note that if you are applying 10.2.0.3 patch set and your apps are odbc, then consider applying also the patch for bug 5699495 (sqoras32 error: unsupported operation).
-
How to install Oracle 10g CRS on a cluster.
can anybody share metalink note-280589 ?..
Edited by: user3234 on Jan 6, 2009 10:56 AMSharing metalink content over here on forums is violation of the support contract.
Get in touch with your Oracle vendor to obtain the metalink login credentials. -
Oracle Clusterware managing Metalink Notes#
Any body suggest impressive metalink notes# for managing Oracle Clusterware....
Hi,
I suggest to you read official documentation on http://tahiti.oracle.com/
Choose your release and search docs about RAC.
If your version is 10g, start with this http://download.oracle.com/docs/cd/B19306_01/rac.102/b28759/toc.htm
And
http://download.oracle.com/docs/cd/B19306_01/rac.102/b14197/admcon.htm#RACAD1111
Cheers,
Rodrigo Mufalani
http://mufalani.blogspot.com -
Need Metalink note 60545.1
Hi,
I am unable to find the Metalink note 60545.1 in Oracle Metalink, Could please any one update me this note or any other notes( latest if any) through which I can find recovery of database without the Controlfile or Recovery catalog.
regardsHi,
Correct me if an wrong here..When I take a full backup of the database automaticatly current controlfile will be included right..(when a system datafile is backed up then also controlfile will be backed up ) I mean
RMAN> backup database format 'd:\testbkp\mybackp_%u.bkp'
so now i have only d:\testbkp\mybackp_%u.bkp backup with me and dont have any other backup even autobackup of controlfile
now if i loose every thing(datafiles/controlfile/s) except the backup (d:\testbkp\mybackp_%u.bkp) I can extract the controlfile from the available backup, one way which I know is..
RMAN> restore controlfile to <'path'> from 'd:\testbkp\mybackp_%u.bkp';
or use the method URL u gave me..
Further; mount the controlfile. Then what ?.. I mean here the controlfile dont have the metadata abt the backup (d:\testbkp\mybackp_%u.bkp) but u have "mybackp_%u.bkp" which contains all datafile required for the database to recover; Am I correct, so how to recover using the PL/SQL package DBMS_BACKUP_RESTORE this what i am looking at..
Thanks for the URL
cheers
Mustafa -
Step by step 10g Dataguard , physical standby database setup metalink notes
On metalink i saw this note, but unable to find now if someone can help....
Note:248382.1 Creating a 10g Data Guard Physical Standby on Linux
-
Hi,
I am working in one of Oracle partner's companies.
I have access to Oracle Metalink but when I want to
raise a tar in oracle classic metalink it tells me that
Not VALID CSI FOUND in Support Identifier section.
What is the problem?Thanks for your quick reply,
In my profile as you can see in below I have all Privileges.
Privileges
Open, update and close SRs Yes
Read SRs Yes
Forum Access Yes
Configure "My Headlines" Yes
Access Patch Download Yes
Software Configuration Manager - Create, Update, Delete Yes
What's the problem.
Thanks. -
Best Practices for Securing Oracle e-Business Suite -Metalink Note 189367.1
Ok we have reviewed our financials setup against the title metalink document. But we want to focus on security and configuration specific to the Accounts Payable module of Oracle Financialos. Can you point me in the direction of any useful documents for this or give me some pointers??
Ok we have reviewed our financials setup against the title metalink document. But we want to focus on security and configuration specific to the Accounts Payable module of Oracle Financialos. Can you point me in the direction of any useful documents for this or give me some pointers??
-
RAC + dataguard architecture/setup metalink notes
Looking for RAC & dataguard configuration for one db ...
Hi,
I think it is rather worth to look around on the [Oracle Maximum Availability Architecture site|http://www.oracle.com/technology/deploy/availability/htdocs/maa.htm] for whitepapers than checking the Metalink (Well, at least I like MAA much better the Metalink)
Hope this helps.
Regards,
Jozsef -
Metalink Note for Warehouse Management System Testcase Repository
Hi Friends,
Please share the meatilink note id for Warehouse Management System Testcase/ Testscripts Repository.
Thanks and Regards,
Aif you have open transactions, such as deliveries, then you may not be able to process them further.
But do you really close all transactions in a test system?
It will not have any harm to new created documents -
11g on OELinx 4.7 Installation: metalink notes
Anybody know this Notes #?
have you tried this.....
http://www.oracle.com/technology/obe/11gr1_db/install/dbinst/dbinst.htm -
Hi,
I am refering to note
Open Account Ap Balance Listing Shows No Xml Template [ID 808571.1]
In step 7, where do i find "sub template" please
ThanksPlease see "Oracle XML Publisher User's Guide" -- Page 2-116, Using Subtemplates
Oracle XML Publisher User's Guide
http://download.oracle.com/docs/cd/B25516_18/current/acrobat/115xdoug.zip
Thanks,
Hussein -
Metalink note 823586.1 - EBS Migration of 11i to RAC with 11gR2.
Has anyone managed to decipher this note relating to the setup for Autoconfig - I am specifically interested in Section 3.7 Step 7 thru 9 - if we follow the steps given we are unable to get the adbldxml.pl to connect to the database.
It seems to relate to the setup of the listeners - but the documentation provided is extremely poor to say the least. Or has anyone produced a set of documentation that actually works ??
Environment is:
11.5.10.2 - AutoConfig enabled single instance converted to RAC/ASM using rconfig (this all worked great).
Database: 11.2.0.1
Oracle Clusterware 11.2.0.1
Platform Solaris 10.
Thanks - JonathanStarting context file generation for db tier..
Using JVM from /u01/oracle/acoserv/ACOSERVrac/11.2.0/jdk/bin/java to execute java programs..
The log file for this adbldxml session is located at:
/u01/oracle/acoserv/ACOSERVrac/11.2.0/appsutil/log/adbldxml_05181254.log
AC-20010: Error: File - listener.ora could not be found at the location:
/u01/oracle/acoserv/ACOSERVrac/11.2.0/network/admin/ACOSERV1_finsdb137/listener.ora
indicated by TNS_ADMIN. Context file can not be generated.
Could not Connect to the Database with the above parameters, Please answer the Questions below
Enter Hostname of Database server: finsdb137
Enter Port of Database server: 1521
Enter SID of Database server: ACOSERV1
Could not Connect to the Database : Got minus one from a read call
When I do a check of the listener status - we are using clusterware so at this stage in the migration document the only listener we have running is the standard listener on 1521:
lsnrctl status LISTENER
LSNRCTL for Solaris: Version 11.2.0.1.0 - Production on 19-MAY-2010 06:00:39
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Solaris: Version 11.2.0.1.0 - Production
Start Date 12-MAY-2010 12:00:43
Uptime 6 days 17 hr. 59 min. 55 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/oracle/oragrid/ASMdb/11.2.0/network/admin/listener.ora
Listener Log File /u01/oracle/base/diag/tnslsnr/finsdb137/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=host2-vip)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=host2-vip)(PORT=1521)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM1", status READY, has 1 handler(s) for this service...
Service "ACOCRP1" has 1 instance(s).
Instance "ACOCRP1", status READY, has 1 handler(s) for this service...
Service "ACOCRP1_XPT" has 1 instance(s).
Instance "ACOCRP1", status READY, has 1 handler(s) for this service...
Service "ACOCRP2" has 1 instance(s).
Instance "ACOCRP2", status READY, has 1 handler(s) for this service...
Service "ACOCRP3" has 1 instance(s).
Instance "ACOCRP3", status READY, has 1 handler(s) for this service...
Service "ACODEV" has 1 instance(s).
Instance "ACODEV", status READY, has 1 handler(s) for this service...
Service "ACOMST" has 1 instance(s).
Instance "ACOMST", status READY, has 1 handler(s) for this service...
Service "ACOSERV" has 1 instance(s).
Instance "ACOSERV1", status READY, has 1 handler(s) for this service...
Service "ACOTRNG" has 1 instance(s).
Instance "ACOTRNG", status READY, has 1 handler(s) for this service...
The command completed successfully
We think we have found a workaround - which is to shutdown the original EBS listener ACOSERV, copy the listener.ora file to the new $TNS_ADMIN directory for RAC, edit it and change the SID_LIST to include ACOSERV1 and then start this new listener ACOSERV from this new location - this allows us to connect to the db - but there is nothing in the document about doing any of these steps, so we think it is a bit of a hack - want to know if anyone else has come across a final solution.
Thanks - Jonathan
Maybe you are looking for
-
Port Forward and IP address question
I am configuring my father's computer so that I can "see" his screen. He's on a different network, using a mac with a wireless router. He enables remote desktop login, I use Chicken of the VNC software on my mac to see and control his computer. Here'
-
Hi: Would some one tell me which database I should be on when run {backup database;} (on catalog database or on target database)? And also in "allocate channel ch1 device type disk format 'C:\Rman_backup\%d_%u_%s_%p';" what is 'C:\....'? Is it the lo
-
JTabbedPane single event handling class.
I have a list of proxyNames which are stored in a Vector. These proxy names are then displayed as Tabs accordingly. For every tab there is a specific action to be performed. I want to write a single event handling class for handling all events. What
-
Optimize a data parser that converts CLOB into table
I am importing complex array data from Cold Fusion into ORACLE using a stored procedure. What I've done is convert the data into a CLOB, pass it into ORACLE, then parse it into a temporary table using a pipelined function. Unfortunately the array is
-
Will it Crash again..??
Thought i was stable before but appears not. !!! Corrupted os and Had to do a Re install. , I dont know if it was memory timings or overcloked to far.? was @ 2.2 / 220.... So after a Hundred Passes of Memtest i can say for sure ma mem is ok @ 3-6-3-