Metalink note 399737.1: Is there a 10.2.0.3.0 client?
Metalink Note 399737.1 says that the fix is provided in 10.2.0.3.0 client and further recommends applying a server patch of 10.2.0.2.0 to a client installation.
This is intended to solve "Login With SQLDriverConnect Fails With ORA-00022 Using Oracle10g 10.2 ODBC Driver".
Cause This is a Windows platform only problem.
This has been identified to be caused by
Bug 4991478 COM application not able to connect when using Oracle10g Client 10.2 if using Neutral Threading or Free-Threaded Marshaller, Fails With ORA-21561 / ORA-00022
With fix for
Bug 4937225 ORA-22 from OCIStmtExecute after OCISessionBegin (Not published externally)
the application fails with ORA-21561.
Solution This is fixed in Oracle10g Client 10.2.0.3.
For Oracle10g 10.2.0.2, apply Server patch 10.2.0.2 patch 1 on Client, Patch 5140461 .
References
Bug 4991478 - ORA-21561 / ORA-22 WHEN USING COM NEUTRAL THREADING OR FREETHREADED MARSHALLER
Patch 5140461 - ORACLE 10G 10.2.0.2 PLACE HOLDER BUG FOR PATCH 1 ON WINDOWS 32 BIT
My current client version is 10.2.0.1.0. On applying the patch, I get an error while launching SQL*Plus:
The procedure entry point LpxStreamParseWithDTD could not be located in the dynamic link library oraxml10.
Is there such a client released by Oracle, and is the second option correct?
Note that if you are applying 10.2.0.3 patch set and your apps are odbc, then consider applying also the patch for bug 5699495 (sqoras32 error: unsupported operation).
Similar Messages
-
Questions on Metalink note 392673.1 (bug 5458753)
I have a few questions on Metalink note 392673.1. This note states that if two schema have objects with similar names and these two schema issue identical statements, it is possible that the statement will run against the wrong schema's object if "a cursor gets reloaded in a certain manner".
Does anyone know any more details? What manner of reloading? Will synonyms prevent the problem? Is there a test case?
Also, the note states that it applies to versions 10.1.0.2 to 10.2.0.3, while the bug claims that it is fixed in 10.2.0.3. Is 10.2.0.3 affected or not?
Paul MullerHi,
It seems that bug is solved in 10.2.0.3 patchset, and interim patch for 10.2.0.2.
Anyway, if you have any question on metalink note, you might have more chance to get a valid answer by asking it into metalink forum, or send an email to the author of the note.
Nicolas. -
How to view all the metalink notes in a single window?
Friends,
I have metalink access...i want to view all the metalink notes in a single shot.
now i am searching the metalink notes by entering the artical id...is there any way to get all the documents in one shot ...
like how we are seeing the forum threads here...
thanksDo you also as a librarian for an overview of all the books? :-)
Have you any idea how much information, knowledge, bug-reports, questions, patch-lists, documentation etc..etc. is on Metalink?
That would give you a list of millions of rows. And how do you want them sorted, by version, by OS, by what??
FJFranken -
Capture Error- Operation could not be completed as there is no video.
Hi. I'm using Final Cut Express HD 3.5.1 and I seem to have a problem importing video. I successfully imported one DV tape (out of several for a film project I'm working on) using the DV-NTSC Easy Setup.
I use a Canon Optura 40 camera connected via a Fire Wire 400 cable. The cord runs straight from the camera (where it has a 4-pin connector) to the computer. As a longtime iMovie user I followed all the proper procedures - the camera is in VTR mode the tape is ready to go.
Now, Device Control says "VTR" OK and the playback controls in the program actually control the tape. Everything seems right so far. But when I click "Capture Now" in FCEHD it says, "This operation could not be completed as there is no video." What's more is that FCE freezes up (processing cursor) until I take the camera out of VTR mode.
Apple reccomends using the Fire Wire Basic Easy Setup. I've tried that. It still doesn't work.
Another curios note - iMovie seems to have the same problem, which I've never encountered until I've tried to use the camera with this computer - I'm running on a recently purchased MacBook Pro (2.33 GHz, 2 GB RAM) off of an external hard drive (G-Drive 7200 RPM 500 GB).
I am stumped.
Can anyone lend a hand?So, I tried sending the camera into the FireWire 400 Port on the back of my external HD and I still got the same problem in FCE.
Here's what's really interesting - it will import into iMovie with the new setup.
Whenever my camera is in VTR mode and the Capture Screen is even just OPEN in FCE, the computer freezes until I take the camera out of VTR mode.
I'm really stumped. If I would have to install new components inside of my laptop I might just vie for loading the footage into iMovie and transferring it (if there's no loss of quality. Is there?) but I'm still hopeful for a simple solution to getting FCE to recognize the camera.
I can't really load the footage into my Mac's HD because it's not big enough. I have a video project with about 12 DV tapes of footage, and my internal HD definetely couldn't hold that. -
I have created a PDF and password protected it for view. However, when reading the PDF in Adobe Reader app on the iPad the commenting and annotation options are not available. Is there a way to allow commenting and annotation in the app while password protecting the document?
Is there a setting that needs to be set to allow the annotation features? I set password protection to open and then password for editing and set it to Any except page extraction, but it still did not give the annotation option
-
my ipad is having trouble with my music... i had recently gotten a new one when i signed into my icloud the music that i had on the orignal one was not there.... some songs were in fact there but not clickable ( it was there only gray)... i was looking for help on how to get the music on the ipad
my ipad is having trouble with my music... i had recently gotten a new one when i signed into my icloud the music that i had on the orignal one was not there.... some songs were in fact there but not clickable ( it was there only gray)... i was looking for help on how to get the music on the ipad
-
My USB port on my Macbook Pro stopped working and i tried the SMC reset and the one closest to the SD port still continues to not work. Is there anything i can do besides bringing it in?
I would do another SMC reset. If nothing changes you should take the computer in to an Apple store for a free diagnostic. You should make an appointment.
http://www.apple.com/retail/geniusbar/ -
I use different languages in my daily activities, when typing other than English Mac does not recognize them, is there anyway can Mac stop suggesting or automatically correcting me?
Is this a problem with the computer or with the word processor? MS Word for example seems to think its grammar and spelling are better than mine - they are not. You have to go into MS Word preferences and uncheck all the useless "help" it wants to provide.
-
"iTunes application could not be opened. There is not enough memory availab
I just upgraded to the new 7.3 version of iTunes, and now it wont even let me open iTunes. I get an error box that says "iTunes application could not be opened. There is not enough memeory available." However, I have way more than enough memory available, and I've had no problems with any other applications. Quicktime is working just fine as well. I've tried restarting and opening iTunes from every location I could think of. Any ideas on how to fix this? Thanks!
It's a unified GUI program http://gui.interacto.net/ and some people (including me) have had this error message when using it with iTunes 7 Their latest version 1.3.1 seems to overcome this, but if you are not using it ........!
It might be worth reading this thread http://discussions.apple.com/thread.jspa?messageID=3095171� as a couple of people on it have tried other things -
I have a Mac Book Pro with 10.6.8 and want to back up my files using a flash drive. It says I did it but when I tried to check on my other Mac - an I Mac with 10.5.8, thedata does not seem to be there. I cant see photos, etc.. It shows the backup as a file and shows various system info. but there are no photos or other files shown.
Thanks for any advise.
MikeA PowerPC Mac, if that's what it is, won't be able to see an Intel Mac's formatted data. Also ExFat formatting is not supported by 10.6.3 or earlier. I would try viewing the backup on another Intel Mac with at least 10.6.4. If it isn't there, then the backup never really took place. I much profer a hard drive with Carbon Copy Cloner.
-
Thank you! This may sound lame but are these instructions for my blackberry? I'm receiving iCloud emails without problems on my MacBook Pro and I'd rather not mess w/ settings there. Thanks again!
You don't need to start a new thread to continue a conversation, you can just tack onto the original one. The settings I referred you to are for the Blackberry, since that's the device which is not receiving mail: anything which is working can be left alone.
-
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
AndyIf you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
Try running the install program for the ZSC with the following command line:
setup.exe /V"STUNINSTALL=1"
If you've specified an uninstall password, try this one instead:
setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
Let me know if that helped you.
Daniel
>>>
From: Andy_DeWees<[email protected] du>
To:novell.support.zenworks.endpoint-security-management
Date: 2/5/2009 12:52 PM
Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy -
Windows Server 2012 R1 with Exchange 2013 SP1
Windows XP SP3 with Outlook 2010 (14.0.4760.1000) computer is on the same network, but not a part of the domain.
When I try to configure Outlook profile for the user, I manually enter exchange server name and user name.
Check User button underlines server name and user name and profile gets created successfully.
Once I try to open outlook for the user I get
Cannot open your default e-mail folder. Microsoft Exchange is not available. Either there are network problems or the Exchange computer is down for maintenance
If I search the content of the log files under
X:\Program Files\Microsoft\Exchange Server\V15\Logging\RPC Client Access
I can’t find any records indicating a connection attempt from the client’s IP or references to the version of the outlook used, however I can see a 3 way handshake followed by a 4 RCP packets and then 4 nspi bind requests and responses when outlook opens
up and then connection is torn down.Windows Server 2012 R1 with Exchange 2013 SP1
Windows XP SP3 with Outlook 2010 (14.0.4760.1000) computer is on the same network, but not a part of the domain.
Hi,
That version of Outlook 2010 (14.0.4760.1000) is not supported with Exchange 2013 and will not be able to connect. It need to be on at least SP1 +
Outlook 2010 November 2012 update (14.0.6126.5000)
See: Exchange 2013 System Requirements -
Client Support
Martina Miskovic -
Can someonee please assist me in my Adobe Photoshop CS6 Extended. I keep getting a 'Couldn't Complete Your Request because Dynamic Link is not Available?" Is there a way of getting a software patch for this problem? I thought you didn't need extra software. My software other than that problem works fine.
Couldn't complete what request? Way more information please.
What operating system? -
My daughter has spitefully changed my password and has refused to tell me. I have so much medical information that I can not lose. Is there anyway to get around this problem. Please I need Help fast.
Connect the iPod to your syncing computer and restore it via iTunes. However, if iTunes asks for the unknown passcode you need to place the iPod in recovery mode and then restore the iPod from backup. For recovey mode see:
iPhone and iPod touch: Unable to update or restore
"If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone and iPod touch software."
Above is from:
http://support.apple.com/kb/ht1212
Maybe you are looking for
-
Document or report for assessment and reversed assessment?
Hi guyz, Is there any document or report for assessment and reversed assessment? I need to find documentation as a proof for any execution and reversal of assessment, such as journal entry or report line items that is showing debit or credit for the
-
Why do colors come over as Color Book swatches when I copy and paste to a new document?
Why do colors come over as Color Book swatches when I copy and paste to a new document? Original document has CMYK spot color swatches. I copy them and paste them in new document and it gets converted to a Color Book swatch. Why?
-
Inserting date & time in Word 2008 document
I'm trying to create simple AppleScript and I'm hoping someone on here can help me. I work in Word 2008 for Mac and want to create a script that simply inserts the phrase "Left message(space)" plus the date and time whenever I run the script. I'd als
-
Hi, I am attempting to write something like a text game in Java. Obviously for something like this I need to be able to save the state of the program, so I am attempting to use persistence but I am running into a problem. My Game object contains ever
-
Hot Sync for T|X Error Code 4004 Pm TraceDatabase Handheald Error: file could not be opened Solution found for Treo (perform soft reset), did not work for T|X I'm tired of the error message. Is there a solution that works? Post relates to: Palm TX