Method is not getting created in sproxy

Hii,
I have created proxy for OutBound Asynchrous Message Interface in sproxy. After activating the object. When I see in the class, Execute_asynchrous Method is not getting created.
What could be the problem?
Any help would be appreciated.
Regards,
Varun

Hi,
Since ECC 6.0 version, EXECUTE_ASYNCHRONOUS methos and EXECUTE_SYNCHRONOUS methods are not generated with that names.
Instead, The same name of your message interface is created as a method.
Carlos

Similar Messages

Attachment not getting created in PI from CRM

Hi Everyone,
I am trying to create attachments in PI from CRM but it is not getting created there. I am executing the following steps:
By default I am getting the attachment data in Binary format so I am using this function module to convert it into XSTRING format.
          CALL FUNCTION 'SCMS_BINARY_TO_XSTRING'
                          EXPORTING
                     input_length = lv_input_length
                     first_line   = lv_first_line
                     last_line    = lv_last_line
                   IMPORTING
                     buffer       = lv_xbuffer
                   TABLES
                     binary_tab   = file_content_binary.
   2. Then I am getting the server context and the protocol.
                       obj_server_context = cl_proxy_access=>get_server_context( ).
                       obj_attch_protocol ?= obj_server_context->get_protocol( if_wsprotocol=>attachments ).
* Assign File naame to STRING Variable
                       lv_name = lv_filename.
* Attach file to the service response.
                       obj_attachment = obj_attch_protocol->get_attachment_from_binary(
                                  data = lv_xbuffer
                                  type = if_ai_attachment=>c_mimetype_pdf
                                  name = lv_name ).
                       APPEND obj_attachment TO t_prx_attach.
                       obj_attch_protocol->set_attachments( t_prx_attach ).
   3. Then I am using a proxy class which has Input and Output structures for sending data to PI and getting the response respectively. And then in the end I am calling the proxy and passing the structures.
     With this I am unable to see the attachmenmts in sxmb_moni transaction. Please help.

Hi Gurus,
Can you please help with some pointers on this.
I have used below links as reference for coding.
Link 1 :
http://help.sap.com/saphelp_nw04/helpdata/en/a7/3b2a2d45a34a23b75e3b18745c63bc/content.htm
Link 2:
http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/10/19/abap-proxy-protocols-use-cases-and-examples
After setting attachment(Method SET_ATTACHMENTS) i am not getting any exceptions,but still i am not able to see any attachment created in SXMB_MONI.
Thanks in Advance,
Manil.

Spool not getting created in batch job

Hello experts,
We have a requirement of printing BA00, BA01 and LD00 from different application.
We have done same code for all BA00, BA01, and LD00.
Normally the code is working fine except in few cases, when batch job is created but spool is not created.
DATA: job_name TYPE tbtcjob-jobname,
              number   TYPE tbtcjob-jobcount,
              print_parameters TYPE pri_params,
              wv_pripar    TYPE pri_params,
              wv_arcpar    TYPE arc_params,
              wv_val       TYPE c VALUE 'X',
              wv_false     TYPE c VALUE 'X',
              gv_mandt     TYPE tsp01-rqclient,
              gv_user      TYPE tsp01-rqowner.
          CLEAR: gv_mandt, gv_user, number.
          gv_mandt = sy-mandt.
          gv_user = sy-uname.
          job_name = 'DELIVERY_PRINTING'.
          CLEAR: range1.
          range1-sign = 'I'.
          range1-option = 'EQ'.
          range1-low = 'LD00'.
          CLEAR: range1-high.
          APPEND range1 TO range.
          CALL FUNCTION 'JOB_OPEN'
            EXPORTING
              jobname          = job_name
            IMPORTING
              jobcount         = number
            EXCEPTIONS
              cant_create_job = 1
              invalid_job_data = 2
              jobname_missing = 3
              OTHERS           = 4.
          IF sy-subrc = 0.
            SUBMIT sd70av2a WITH rg_kschl IN range
                            WITH rg_vbeln IN deli_tab
                            TO SAP-SPOOL
                          SPOOL PARAMETERS print_parameters
                          WITHOUT SPOOL DYNPRO
                          VIA JOB job_name NUMBER number
                          AND RETURN.
            IF sy-subrc = 0.
              CALL FUNCTION 'JOB_CLOSE'
                EXPORTING
                  jobcount             = number
                  jobname              = job_name
                  strtimmed            = 'X'
                EXCEPTIONS
                  cant_start_immediate = 1
                  invalid_startdate    = 2
                  jobname_missing      = 3
                  job_close_failed     = 4
                  job_nosteps          = 5
                  job_notex            = 6
                  lock_failed          = 7
                  OTHERS               = 8.
              IF sy-subrc <> 0.
              ENDIF.
            ENDIF.
            WAIT UP TO 10 SECONDS.
** to give the data to the printer***
*            CLEAR gv_rqident.
            SELECT SINGLE listident INTO gv_listident FROM tbtcp
                          WHERE jobname = job_name
                           AND jobcount = number.
          IF sy-subrc = 0.
            MOVE gv_listident to gv_rqident.
            CALL FUNCTION 'RSPO_OUTPUT_SPOOL_REQUEST'
              EXPORTING
                spool_request_id = gv_rqident.
          ENDIF.
The same code is for all the output BA00, BA01 and LD00.
The issue is that for few batch jobs (which is created in the above code) , spool is not getting created.
Thanks and Regards,
Paritosh Pandey

Hi,
The code starting from WAIT UP TO 10 SECONDS. - not only does it look attrocious, is error prone (if no free process for executing batch job is available for 10 seconds, or if the job runs for more than 10 seconds, what will happen...?), but seems utterly unnecessary... Is there any reason immediate spool output can not be handled by simply setting PRINT_PARAMETERS-PRIMM = 'X'?
cheers,
Janis
Edit in:
Ok, i just read Document in spool but not printed... Do not use an output device relying on frontend access methods to do printing from background processing. Frontend is not available during background processing, period. To my knowledge there is no easy, clean solution to this problem other than defining and assigning, per user, output devices not relying on frontend printing. What if the dialog user has logged off by the time batch job finishes..? May the spool remain unprinted?
Has the SAP Basis refused to define output devices (I have hard time believing this...)? Well, tell them one time to stop being silly and if they do not cooperate, tell the owner of the requirement that it can not be implemented due to uncooperative Basis then... and that the users will have to keep going to SP01 and manualy start the output!
Message was edited by: Jānis B

Sub Order not getting created

Hi All,
           i am debuggin a code which is creating SUB ORDER (iw36) through call transaction method.
The transaction is filling the superior oder ,but after OK CODE it doesnt navigate to the next screen, instead it shows a message log, without any messages.
In the debugging mode I could notice that it fails at the point where FM CO_ZF_ORDER_LOCK_MULTI is called in SAPLCOIH. The parameter 'NOT_LOCKED' is having 2 records, as a result of which the FM CM_F_ANALYSIS is getting called which displays the log.
Please guide me in understading why the sub order is not getting created.
Thanks,
Vasuki
Edited by: Vasuki S Patki on Jul 14, 2009 3:03 PM

Hi Gajesh,
1)                 The Work center does not exist , I checked it in IR02..
2)                 I created the sub order manually , but it works fine. There is no error when creating manually.. But whne it is called from the program it takes a wrong entry for Workcenter that does not exist. But when I change it to the existing Workcenter it proceeds further.
3) I want to know where in the program the KTEXT is being populated, as it is taking an entry that does not exist in the superior order, it is a new entry.
Thanks,
Vasuki

LEADS NOT GETTING CREATED USING EXTERNAL LIST MANAGEMENT (ELM)

Hi Folks,
We are trying to create leads via ELM.
When ELM is executed records are getting uploaded,BP's are created.But leads are not getting created.
Pls find attachments for mapping format attached to ELM.
Assignment block Process steps is as shown below:
We tried n number of times to create leads but its not happening.
Pls suggest how to resolve the same.
Any help is highly appreciated.
Regards
Jaya

Hi Kavindra,
Below mentioned is the screenshot of badi debugging.
Our technical consultant analysed the scenario and found out that Lead transaction data is not filling in standard and no data is coming into method create_business_transaction where Leads will be created based on the input data and says this has to fill in standard if all the mapping fields and data uploading is correct.
Pls suggest exactly where we are going wrong.
Pls let me know if u need any further info from my side.
Regards
Jaya

Excise invoice should not get created without PGI

Hi,
I have a scenario where the billing document is being generated by the customer without PGI after creation of outbound delivery for exports. (This is as per customer's requirement - Copy control maintained in VTFL for the same - copying requirements 11 )
This creates a situation - excise invoice can be created without PGI - which creates problems for customer. This should not happen.
Customer wants a check during the excise invoice creation - excise invoice should not get created if PGI has not been done.
Kindly advise as to how this can be done.
Regards,
T Saravanan

Dear Saravanan
Two options are there
- in your existing routine itself, you can specify the control in such a way that unless the preceding document is PGId
- apply excise user exits like J_1I7_USEREXIT_EXCISE_BEF_SAVE to achieve the requirement.
thanks
G. Lakshmipathi

Invoice is not getting created in Order related billing

Dear all,
I am trying to do a Order related billing. After creating the order i am going to VF01 and selecting the billing type i have created and trying to create the invoice. I am getting the error "No billing documents were generated. See log" when i am checking the Log its showing now errors.
In case if my account determination procedure is wrong, system should allow me to create a Sales invoice and accounting document will not be generated. But in this case even the sales invoice is also not getting created.
Please suggest me if there are any configuration changes i need to do to overcome this problem.

Apart from the suggestion already given, also ensure that
the order is not showing in incomplete log
the order is not blocked for credit limit
You can also cross check in VF04 whether system is fetching that sale order. For information, once you execute VF04, by default, system will check only "Delivery related" check box. You have to manually select "Order related" check box.
G. Lakshmipathi

File not getting created in a different server

My requirement.
I have written a code in the BI system and now need to write an empty file (say a.done)in a directory /interfaces of PI system.
I wrote using open data set and close data set however the file (a.done) is not getting created in the PI system even though the directory /interfaces exist.
When I give any directory of that of BI system ,the file(a.done) is getting created i.e the file is getting created on the same server and not on the different server.
Is there any function module or any other way for the file to get generated in the PI system.
Please explain with an example.
Regards,
Vish

Try to use search FTP in se37 or checkout the below FM
CALL FUNCTION 'EPS_FTP_MPUT'
EXPORTING
    RFC_DESTINATION            =
*   FILE_MASK                  = ' '
*   LOCAL_DIRECTORY            = ' '
*   REMOTE_DIRECTORY           = ' '
*   OVERWRITE_MODE             = ' '
*   TEXT_MODE                  = ' '
*   TRANSMISSION_MONITOR       = 'X'
*   RECORDS_PER_TRANSFER       = 10
*   MONITOR_TITLE              =
*   MONITOR_TEXT1              =
*   MONITOR_TEXT2              =
*   PROGRESS_TEXT              =
* IMPORTING
*   LOCAL_DIRECTORY            =
*   REMOTE_DIRECTORY           =
*   LOCAL_SYSTEM_INFO          =
*   REMOTE_SYSTEM_INFO         =
* TABLES
*   FILE_LIST                  =
* EXCEPTIONS
*   CONNECTION_FAILED          = 1
*   INVALID_VERSION            = 2
*   INVALID_ARGUMENTS          = 3
*   GET_DIR_LIST_FAILED        = 4
*   FILE_TRANSFER_FAILED       = 5
*   STOPPED_BY_USER            = 6
*   OTHERS                     = 7
IF SY-SUBRC <> 0.
* Implement suitable error handling here
ENDIF.

Weblogic Domain not getting created in SOA Suite 11g R2

I have installed the components of SOA Suite 11g R2 (11.1.1.3) on a single Windows XP SP3 machine (32 bit) following recommended procedures. I tried to configure Weblogic server using Domain Configuration utility. After navigating hrough the wizard, no Weblogic server profile is getting created in the doamin folder. Even the WL Admin server is not getting created. The Domain Configuration utility did not throw any errors.
1) Is this problem related to Oracle repository for SOA suite 11g?
2) Can the repository schemas (Oracle) hold multiple weblogic SOA domain information?

Hi,
Weblogic servers directory do not gets created after domain creation or even managed server configuration. It will present itself only when you start the managed server for the first time, that is when it initializes all security attributes, diagnostic attributes (if configured) , etc..
Perform server start and then check if it gets created or not.
## rank answer if it is helpful ##
Thanks,
Ranjan

BP not getting created while creating employee

Hi,
When I Hire an employee a BP should be created for it. It used to happen earlier in the system but after we moved to another system this is not working. Can someone please let me know the necessary config for this?
I've the following settings:
HRALX ONUMB = 2
HRALX OSUBG = MD
The MD number range is from 90000000 to 9999999999. Should this number range be internal or external?
When I use the HR_SYNC_PERSON report for an employee I get the error as
"Determination of connections to object 'BP' of 'CP' '50000201' failed"
"Object of type 'US' with ID '1122' does not exist or is inconsistent"
"Determination of connections to object 'BP' of 'O' '50000101' failed" etc
Also I need to upload the employee master data using LSMW and BP does not get created with LSMW also? Is there some specific config while using LSMW?
Please help.

Whenever you are uploading employees using LSMW, you need to run program HR_SYNC_PERSON.
Pls refer to the following thread for further info:
Assignment: Business partner for person '50000029' is not unique
Regards,
Dilek

AUC Asset not getting created when Internal Order is created

Dear Experts,
While Creating the internal order ( Object Class - Investment Measure)
AuC (Asset Under Construction) not getting created automaticall . Note Investment profile is already there in the order.
Following steps below are configured -
1. Define the AuC Asset Class (with investment measure) - OAOA
2. Define the Asset Class u2013 for Main Asset - OAOA
3. Define Investment Profile - OITA
a. Assign the AuC Asset Class (Step-1) in the investment profile
4. Assign Investment Profile to Model Order - OITA
5. Define Order Type (Investment) - KOT2
a. Settlement Profile - OKO7
b. Maintain Allocation Structures - OKO6
Thanks
Sanjai

Hi Sreekanth,
What is the setting needed to create AUC Automatically when an Internal order is created ?
I have done all the setting, but still when I save Internal order neither AUC asset is getting created.
So I went to extras selected create AUC and it went to AS01, but when I came back (F3) from AS01 to Internal Order and save , Auc Asset is not getting captured in the settlement rule. I even tried to give manually the AUC Asset in the settlement rule, for which sys is not allowing in the settlement rule.
Any thoughts are highly appreciated
Advance Thanks
Sanjai

Accounting doucment not get created for Credit Memo

Hi
When creating a cancellation doucment(vf11) for credit memo accounting document not get created.While I go for analysis then it is determining the G/L account.But not getting created the accounting doucment.
When i select "Release to accounting" then it is giving a message like this:
"Automatic clearing of billing document 951
and canc. doc. 90000572 not poss." as informatiion first
and then later it is throwing an error message that "maintain correct number range"
While for the same material or earlier cancellation happened and accounting doucment get created.
Please help me out;How would i get this solved?
Thanks in advance

Hi,
You may also check for Number Range - Maintainance & Assignment.
T. Code: SNRO
Table/ View: RV_BELEG
Here, Mantain Number Range.
To Assign,
T. Code: SM30
T.Code: Bill_Num (or select if different in your case)
Assign No. range to your combination of Sales OrgDist.ChannelBill Type i.e. for Cancelled Billing Doc. Type
To Maintain Number Range for Accounting Documents,
T. Code: FBN1
Best Regards,
Amit

SRM PR is not getting created in ECC backend

Hello Experts,
We are running SRM 7.0 with SRM-MDM Catalog, we are using SRM for shopping. We do have PI 7.11 running in the Environment as well.
We are on ECC 6.0 with Ehp 4.0
Purchase Order:
However we can see the PO creating successfully using PI.
Question, in the SRM table (BBP_FUNCTION_MAP), we see the object type: BUS2012 for ERP 4.0 has adapter name: /SAPSRM/CL_SOA_ADPT_PO_CRT_ERP for when creating PO. Please see teh screen shot.
is this the reason that we need PI?
Purchase Requisition:
PR Creation is not working:
PR is not getting created in the ERP, PR uses Object type: BUS2105, Adpater CL_BBP_BS_ADAPTER_RQ_CRT_470 for ERP 4.0 System type, can you please tell me if the adapter is correct for ERP 4.0 system type?
I also have a question to ask:
1) Where did you see that PR/PO was send to PI System (PI1)? My understanding is that since ERP amd SRM are 2 ABAP Systems, why we cannot send the PR/PO directly to ERP system from SRM? Why do we need a middleware(PI) in between for this process? We should be able to USE BAPI function to do it correct?
Please advice.
Thanks
Kumar

yes, i could see a PR number with all this additional details as below.
Table   BBP_PDBEI
CLIENT                       453                                                              Client
GUID                         4CAEFA58EB9D005CE1008000AC1C2031                                 Globally Unique identifier
BE_LOG_SYSTEM                QA1400                                                           Logical System of Logistics Backend
BE_OBJ_ITEM                                                                                Follow-On Object Item in Back-End System
BE_OBJECT_TYPE               BUS2105                                                          Follow-On Document Object Type in Back-End System
BE_OBJECT_ID                 2000000167                                                       Follow-On Document Object ID in Back-End System
BE_REFOBJ_TYPE                                                                                Reference Object Type in Back-End System
BE_REFOBJ                                                                                Reference Object in Back-End System
BE_REFOBJ_ITEM                                                                                Reference Object Item in Back-End System
BE_REFOBJ_SBITM                                                                               Reference Object Sub-Position in Backend System
BE_REFOBJ_TYPE2                                                                               Reference Object Type in Back-End System
BE_REFOBJ2                                                                                Reference Object in Back-End System
BE_REFOBJ_ITEM2                                                                               Reference Object Item in Back-End System
BE_REFOBJ_FYEAR2             0000                                                             Reference Document Object - Fiscal Year in Back-End System
BE_STGE_LOC                                                                                Storage location
BE_PLANT                     2016                                                             Plant
BE_BATCH                                                                                Batch Number
BE_VAL_TYPE                                                                                Valuation type
BE_MOVE_REAS                 0000                                                             Reason for Movement
BE_EXPERYDATE                00000000                                                         Shelf Life Expiration Date
BE_PUR_GROUP                 206                                                              Purchasing group
BE_PUR_ORG                   2000                                                             Purchasing organization
BE_CO_CODE                   2000                                                             Company Code
BE_DOC_TYPE                  CLRQ                                                             Purchase Requisition Document Type
BE_ACCREQUIRED                                                                                Account Assignment for Logical Backend Required
BE_SP_STK_IND                                                                                Key for Special Stock Section
BE_INFO_REC                                                                                Number of purchasing info record
BE_MOVE_TYPE                 201                                                              Movement type (inventory management)
BE_PACKNO                    0000000000                                                       Package number
BE_INTROW                    0000000000                                                       Internal line number for limits
BE_ITEM_TEXT                                                                                Short Text of a Service Purchase Order Item
BE_PO_PRICE                  1                                                                Price from Backend
BE_UNLOAD_PT                 200                                                              Unloading Point in Backend
BE_DEL_IND                                                                                Deletion Indicator in Backend Documents
BE_TRACKING_NO                                                                                Requirement Tracking Number
BE_COND_TYPE                                                                                Condition Key
BE_COND_STEP                 000                                                              Level Number
BE_COND_COUNTER              00                                                               Condition counter

WBS Elements not getting created in ECC Project System from CRM 7.0

Dear all,
We are trying to integrate SAP CRM 7.0 with SAP ECC-PS module. The objective is to bring in the marketing plan and elements data from the CRM system, and to create the corresponding WBS in project system. We have done most of the configuration as recommended by SAP in both the systems, and we see that the BDOCS are getting generated and sent to the ECC system. The following steps have been successfully completed:
1.       Set up the RFC connections between the two systems
2.       Selected the connection type as Middleware in CRM system.
3.       Installed the cProject Add on in CRM box.
4.       Created a project scenario (with project and network profiles) in the PS system and assigned the same in the CRM system.
5.       The Project Scenario in PS config has the same name as the Project Type in CRM config.
6.       Created and released the campaign ids being created in the CRM system.
As already mentioned, we can see that the BDOCS are coming to the ECC system and are getting stored in BDOC_TRACK table. However the issue is that the corresponding WBS elements are not getting generated in the ECC system. Is there anything that that we are missing in the ECC box which would trigger the WBS element creation?
Request you all to share your inputs which would be immensely beneficial for us in achieving this integration.
Thanks and Kind Regards,
Aditya Shrivastava

Hello Aditya,
We too are facing this issue.. if you have resolved the issue could you please let us know the solution ?
Some inputs related to our system,
We have upgrade from CRM 4.0 to CRM 7.0 SP07 and R/3 backend system is on 4.7 SP27, earlier we have completed the upgrade on sandbox without any issues which was upgrade to CRM 7.0 SP04 but with SP07 we are facing the problem of WBS Element not getting created in R/3.
Your help is highly appreciated.
Thanks & Regards,
Sumukh Kapoor.

File not getting created in Target Directory..........

Hi All,
We are trying a IDOC-File scenario & trying to create a XML file on the receiver side........All the mappings have been checked & everything is working fine.It shows success in SXMB_MONI. But the file is not getting created at the target directory..... Checked the component Monitoring and message monitoring as well, which is also successful...
What could be the reason of such behaviour, and is there a way to track the where the target file is getting placed?
Please Help
Regards,
Jayashri

>
Jayashri Rade wrote:
> Hi All,
> We are trying a IDOC-File scenario & trying to create a XML file on the receiver side........All the mappings have been checked & everything is working fine.It shows success in SXMB_MONI. But the file is not getting created at the target directory..... Checked the component Monitoring and message monitoring as well, which is also successful...
i
Did you check the receiver communication channel in communication channel monitoring?
Are there any errors?

Method is not getting created in sproxy

Similar Messages

Maybe you are looking for