Method to find version of EHS WWI server

Hello Experts,
I'm trying to find out EHS WWI server version by tcode CG5Z [in SAP 4.7] -> Utilities - test server.
It gives a popup with WWI server details.--
[WWIRFCSV-Version : EH&S WWI 3.2 ASCII
Running as Windows Service
This RFC library belongs to the SAP R/3
Versions of SAP internal libraries:
dptr:    2
ni :   37
cpic:    3
rfc :    3
WWI-specific informations :
Windows NT, Version 5.2, Service Pack 1.. and other windows server information]
I was not able to find any version information on WWI directory in Program files on Windows server.
Is there any other method to check version by logging onto the Windows server?
Thanks for the help.
Regards,
Vaibhav

Hello all
distributed with WWI package is the programm WWIINFO.EXE. Running tis program you will get a wwiinfo.txt file generated on your server in which you find all informations regarding WWI version etc.
Based on experiences using WWI you should use if possible always the recent version of WWI available. Normally something like two new versions are released per year. There exists an OSS hint describing WWI and the recent release.
With best regards
Christoph

Similar Messages

How to find versions of application server components to apply patches

Hi,
I have Oracle Application server 10.1.2.0.2 installed in my linux box.
under metalink.oracle.com
1. i read documentation Doc ID: 420061.1 in metalink about patches and i did find one patch# 5922120 for my application middletier.
but when i did a metalink search i did see some patches for my database version which were not critical
so if they are not critical and if my application server is working fine then do i need to apply these patches.
My application server version is 10.1.2.0.2
and my apalication server infrastructure version is 10.1.0.4.2
during my metalink searches i found the following patches which were uner normal priority. they are:
patch numbers: 5127390, 5094712, 5605377
Can someone guide me.
Bottom line is: do i need to apply these patches unless they are critical and they are requred for my applications.
Also i have one more basic question is
How do i find out individual component versions in my application server like Portal, discoverer, EM, EM agent, etc?
Thanks in advance,
Philip.
Message was edited by:
[email protected]

Philip,
You have a similar environment to ours. We actually have two Oracle environments: 91) 10gDB 10.1.0.5 / 10gAS 9.0.4.3, and (2) 10gDB 10.2.0.3 / 10gAS 10.1.2.0.3.
In regards to what patches, I look at two items: the latest patchset for DB and AS, and the Critical Patch Updates(CPU). Often, the CPU will drive what patchset you will need to be at. For example, with the CPU April 2007, we had to move to patchset 3 for our AS (9.0.4.3) since that is the only 10gAS R1 that Oracle provided CPU patches.
As far as version ID, I have not found one single area to acquire this. For Portal, you can invoke Portal, http://host/pls/portal, logon as 'portal', then Administer, Global Settings, and at the bottom of the page is the version.
For other products like Forms and Discover, you can find the version when the tool is invoked.
Not quite as nice as the DB side where dba_registry will give you all the goodies.
Regards,
John

How to find what version of Iplanet Web Server is running on System

Hi,
I am trying to find a command which i can run to find out what version of Iplanet Web Server am i running on my Solaris System.
Example: if i ran command it should return something like: Iplanet Enterprise Web Server 4.1 SP8
WIll appreciate any feedback
Thanks

You can go to server_root/bin/https/bin and run "./ns-httpd -v" command:
# ./ns-httpd -v
Sun Netscape Alliance
iPlanet-WebServer-Enterprise/4.1SP8
For the current 6.x versions, you can use the start script of the instance like follows:
# ./start -version
Sun Microsystems, Inc.
Sun ONE Web Server 6.1SP1 B12/19/2003 22:19
Please note that 4.1 version is no longer supported. You
should plan to upgrade to a supported version like 6.1.
Thanks
Manish

Windows service of WWI server doesn't start

Hello all,
I'm installing a WWI generation server (EHSWWI32_26-20000084 on a Windows Server 2008 R2(SP1)) for ECC 6.0.
Now I have a problem with starting windows service.
I installed WWI in the following path.
E:\EHS\WWI
Word version is 2003.
The installation (CGSADM) is finished without problem, and the management server works fine.
But service EHS_WWISRV, which is a service of wwi generation server, fails to start with following messages.
<event log 1>
The initialization process for the EHS_WWISRV_ST1_ST1_01 service failed. Switching Desktop for Word failed!
<event log 2>
WWI started at: 08/03/11 10:48:37 as PID: 1132
Initialisation........start
Working dir is: E:\EHS\WWI
Current PATH is: C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;E:\EHS\WWI
Attaching service to desktop winsta0 / default
session: 0
window station: Service-0x0-e34639$, desktop: Default
Error opening window station winsta0
Windows-Error 5 in SetDesktop/OpenWindowStation: (null)
Error setting window station winsta0
Windows-Error 6 in SetDesktop/SetProcessWindowStation: (null)
Error Attaching service to desktop winsta0 / default
I have no idea what "Switching Desktop for Word failed!" means.
Does anybody know how to fix the error?
Thank you in advance for your support.
Regards,
Kazuma

I could fix the error.
SAP Note 580586 helped me.
WWIUSER wasn't a member of the administrators group, and that caused the error.
Thanks all.

Error on WWI server EHS_GLM_GENSERV: Results file not found on production

Hi Experts,
I need some help/advice. We have issues with our new EH&S WWI server.
This new setup working OK with Dev and QA (the WWI and GLM part is just fine), We did try to link this server to production then it gives below error.
Only difference between existing WWI QA and production server is that
Existing QA and development WWI server installed at location C:\Program Files (x86)\EHS\WWI
And Same path maintain on new server C:\Program Files (x86)\EHS\WWI
But existing production WWI server installation path is different C:\Program Files\EHS\WWI
So is there any customizing changes required from SAP side to avoid this error on production
Can you please advise on this.
================================================================================
Error on WWI server EHS_GLM_GENSERV: Results file not found
Message no. C$830
Diagnosis
The results file of the generation was not found on the WWI server EHS_GLM_GENSERV.
System Response
Generation was not carried out.
Procedure
Advise your system administrator to check the WWI installation on the WWI server EHS_GLM_GENSERV.
Check the Windows event log on the WWI generation server. The event log may contain other error messages.
SAP Note 1058521 provides possible solutions for this error.
==================================================================================
Log shows
============================================================================================================================================
E000 Error: OLE Exception (-2146823114) from Word8_OpenDoc (docs.Open) by Microsoft Word: This file could not be found. (C:\Windows\...\r00000000000001422051.rtf) (HRESULT Code:5174)
E000 Error opening document (Word8_OpenDoc: Documents.Open failed)
================================================================================================================================================

Hello Gajanan,
the path of the temporay workfolder can be configured in the IMG. Often this path is setup as the WWI server installed location but it is just a temporay workfolder which must exist on the WWI server. The path can be configured under:
For ECC 6.0 Ehp 0-2 and lower
Environment, Health and Safety -> Basic Data and Tools -> Basic Settings -> Specify Environment Parameters
For ECC 6.0 Ehp 3-6
Environment, Health and Safety -> Product Safety -> Global Label Management -> Make Settings for Basic Data
For ECC 6.0 Ehp 7
Environment, Health and Safety -> Global Label Management -> Set Basic Data and Tools for Global Label Management -> Make Settings for Basic Data

ALEAUDIT IDoc cannot find request IDoc in Integration Server

Hi,
i m working with a scenario SAP ECC 7.0 -> IDoc -> PI -> IDoc -> R/3 4.6c
I m sending a purchase order (ORDERS.ORDERS05) from SAP ECC and i want to receive an acknowledgment from R/3. Unfortunately there are only zeros in the field E1ADHDR / E1STATE / DOCNUM, this leads to the error "ALEAUDIT IDoc cannot find request IDoc in Integration Server" on PI.
Does anybody know what to do in the R/3 system to send the original IDoc number in E1STATE / DOCNUM?
XML Source of the ALEAUD received at PI:
<?xml version="1.0" encoding="UTF-8" ?>
<ALEAUD01>
<IDOC BEGIN="1">
<EDI_DC40 SEGMENT="1">
<TABNAM>EDI_DC40</TABNAM>
<MANDT>100</MANDT>
<DOCNUM>0000000004307392</DOCNUM>
<DOCREL>46C</DOCREL>
<STATUS>30</STATUS>
<DIRECT>1</DIRECT>
<OUTMOD>2</OUTMOD>
<IDOCTYP>ALEAUD01</IDOCTYP>
<MESTYP>ALEAUD</MESTYP>
<SNDPOR>SAPQV1</SNDPOR>
<SNDPRT>LS</SNDPRT>
<SNDPRN>QV1CLT100</SNDPRN>
<RCVPOR>A000000022</RCVPOR>
<RCVPRT>LS</RCVPRT>
<RCVPRN>QXC100</RCVPRN>
<CREDAT>20090605</CREDAT>
<CRETIM>111523</CRETIM>
<SERIAL>20090605111521</SERIAL>
</EDI_DC40>
<E1ADHDR SEGMENT="1">
<MESTYP>ORDERS</MESTYP>
<MESTYP_LNG>ORDERS</MESTYP_LNG>
<E1STATE SEGMENT="1">
<DOCNUM>0000000000000000</DOCNUM>
<STATUS>53</STATUS>
<STACOD>SAPV1311</STACOD>
<STATXT>&1 &2 wurde gesichert</STATXT>
<STAPA1>Terminauftrag EX</STAPA1>
<STAPA2>2510016042</STAPA2>
<STATYP>I</STATYP>
<STAMQU>SAP</STAMQU>
<STAMID>V1</STAMID>
<STAMNO>311</STAMNO>
<STAPA1_LNG>Terminauftrag EX</STAPA1_LNG>
<STAPA2_LNG>2510016042</STAPA2_LNG>
<E1PRTOB SEGMENT="1">
<DOCNUM>0000000004307353</DOCNUM>
<OBJTYPE>BUS2032</OBJTYPE>
<OBJKEY>2510016042</OBJKEY>
</E1PRTOB>
</E1STATE>
</E1ADHDR>
</IDOC>
</ALEAUD01>
Regards,
Udo

Hi Volker,
yes, that was the right hint
I needed to change the RCVPRT field to LS to force the receiving system to send the ALEAUD with original number at the right place. Strange reaction, but it is SAP software, he, he.
Regards,
Udo

How to find characterSet of Oracle Application Server

How can I find out the character set that was installed when Oracle Application Server was installed?

- Refer to the OAS Globalization Support Document.
Oracle® Application Server Globalization Support Guide
10g Release 2 (10.1.2)
B14004-02
- Read with care these sections:
6.1 Installing Oracle Application Server for Global Deployment
- Also note that
"The NLS_LANG parameter controls the locale of the runtime environment on which OPMN runs. It should correspond to the default locale of the middle-tier runtime environment, which is the default locale of the operating system. The same NLS_LANG parameter is inherited by the OPMN managed processes, such as Oracle HTTP Server and OC4J, unless it is explicitly specified with a different value in opmn.xml.
For Microsoft Windows platforms, the pre-configured NLS_LANG is automatically registered in the Win32 registry as the NLS_LANG registry key at \\HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\HOMEn. The NLS_LANG value in this registry key controls the locale of the runtime environment on which OPMN and its managed processes run. "
- Also note that the NLS_LANG parameter values will have different requirements for a monolingual and multilingual application architectures.
- to find the character set of infrastructure db or metadata repository, you may use the db method to find the character set installed.
SELECT * FROM nls_database_parameters WHERE parameter = 'NLS_CHARACTERSET'
hope that helps!
AMN

Version of Oracle application server

Hi,
How to find the version of Oracle application server installed on RedHat Linux AS machine and Sunsolaris10 machine?
Regards,
Mathew

Matthew,
If you have the application server installed, then you can query from the sys schema on the machine where you have your metadata repository installed (infra-home) to see the versions as follows:
select *
from app_registry;
for checking portal version, you can alternatively go to Builder page/ 'Administer' tab/ 'Portal' option/ 'Services' portlet/'Global Settings' - link. The resulting page will be taking you in the Main tab. Here look at the very bottom and you will see something like this.
Version Information
Oracle Portal Version: 10.1.4.0.0 (Build: 594)
hope that helps.
asif

What version of Adobe Media Server would fit our needs?

Hello. We are considering doing HTTP video streaming on our intranet. We have approximately 500 employees and would want to be able to stream approximately 10 - 50 one-way connections at one time. What version of Adobe Media Server would you recommend to support this?
After reading more about streaming, we would probably want to support the progressive download method.

But it can't create PDF files...

Upgrading hyper-v server 2008r2 free version to hyper-v server 2012r2 free version

Hello,
I have a question, can I upgrade the software of hyper-v server 2008r2 free version to hyper-v server 2012r2 free version.
I want to upgrade a exciting server so a in place upgrade, if yes do I have to worry about something? like shutting down vm's?
thx in advance

Hi,
it's not possible to perform an inplace upgrade from Hyper-V server 2008R2 to Hyper-V server 2012
You can find some more info
here.
You can export your Hyper-V guests, reinstall the machine with a fresh install and import them again.
Hope this helps.

How to find the database details from server audit specification with successfull login group?

Hi,
We have created a server audit for successfull logins.When we read the audit file using
sys.fn_get_audit_file we find that all the fields related to the databases
ie database_principal_id,database_principal_name,database_name are either 0 or null.
Is there a method to find out to which database the login is accessing from the server
audit specification of successfull login group.Although the logins are reading and writing
data to the databases why there are no details of the databases?
Thanking you in advance,
Binny Mathew

Hello Binny,
The logins are used to connect to the instance and the access to the databases is performed via database users. So, once you connect to the instance via your login, the server level audit takes this action, records it, but without caring to which databases
you want to connect after that.
Unfortunately there is no similar action group on the database audit specifications, that can track which user connected to the DB, except if you are using contained databases in SQL 2012.
Probably you can share why you need such information and if there is something else specific that you wish to achieve, so we can propose a different solution/audit configuration.
Regards,
Ivan
Ivan Donev MCT and MCSE Data Platform

Regarding removing all previous versions of the Mocrosoft Server Speech Platform Runtime

While I was trying to install Kinect SDK Ver. 1.8, I was asked to remove all previous versions of the Mocrosoft Server Speech Platform Runtime.
Regarding this, I tried to find the program but I couldn't.
I am working on Windows Vista.
Any comments and solutions would be appreciated.
Thanks,

Hi Park,
I agree with Martin, please ask Vista Forum for help so that you can get more professional suggestions. For your convenience:
https://social.technet.microsoft.com/Forums/windows/en-US/home?category=windowsvistaitpro
However I would like to share some information for you.
Based on my research on Kinect SDK Ver. 1.8, the supported OS as below:
Windows 7, Windows 8, Windows 8.1, Windows Embedded Standard 7
Maybe this is the root reason that why cannot install Kinect SDK Ver. 1.8 on Vista.
More details to see:
http://www.microsoft.com/en-us/download/details.aspx?id=40278
Thanks
Mavis Huang
TechNet Community Support

No ehs management server is currently logged on at SAP Gateway

Hi,
I have installed EHS management server and WWI server on a separate server. The RFC between ECC Dev to WWI server is running fine. The ECC Dev server is able to call the registered program on SAPRFC.ini.
But when I run TCD CGSADM notthing is coming up and it throws error as "No ehs management server is currently logged on at the sap gateway".
I have checked and done whatever was required as per the sapnote 839750, 580586, but still CGSADM is not working.
Also in SMGW i can see the EHS server as Remote Gateway.
Kindly let me know how to rectify the Issue.
Thank You!

Hello
I am facing similar issue, could you please let us know if you found any solution.
Thank You.

Version of Apache web server

Hi,
What version of Apache web server comes bundled with Oracle iAS 9.0.3 version ?
Thanks,
Tom

If your running on a Unix box you can execute the following from Apache/bin to find out : httpd -v

Versioning Tool for SQL Server?

Problem:
Does Microsoft have a versioning tool for SQL server?
I'm thinking about similiar tool as visual studio team foundation but for SQL server?
WOuld like to see any changes in a stored procedure in different version.

Additionally you can also refer below article.
http://blogs.msdn.com/b/bahill/archive/2009/07/31/come-visit-revisit-the-beer-house-continuous-integration.aspx
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
Praveen Dsa | MCITP - Database Administrator 2008 |
My Blog | My Page

Method to find version of EHS WWI server

Similar Messages

Maybe you are looking for