Methodology used in Hard Core Implementation?

"What is the methodolgy used in Hard Core Implementation"?

Hello Farhan,
Please go through the following links................you'll have a clear picture on all 5 steps of implementing SAP in very detail, including the activities involved in each phase.
<a href="http://www.sapfans.com/sapfans/asap/be_01_e.htm">Introduction</a>
<a href="http://www.sapfans.com/sapfans/asap/be_02_e.htm">Phase 1: Project Preparation</a>
<a href="http://www.sapfans.com/sapfans/asap/be_03_e.htm">Phase 2: Business Blueprint</a>
<a href="http://www.sapfans.com/sapfans/asap/be_04_e.htm">Phase 3: Realization</a>
<a href="http://www.sapfans.com/sapfans/asap/be_05_e.htm">Phase 4: Final Preparation</a>
<a href="http://www.sapfans.com/sapfans/asap/be_06_e.htm">Phase 5: Go Live & Support</a>
Reward points if helpful
Regards
Sai

Similar Messages

I'm using a Intel Core 2 Duo Mac OS X 10.4.11. When installing the Seagate FreeAgent GoFlex portable hard drive, I find an error in the logs - "dyld: Symbol not found: ___stack_chk_guard". How do I fix this? Thanks,

I'm using a Intel Core 2 Duo Mac OS X 10.4.11. When installing the Seagate FreeAgent GoFlex portable hard drive, I find an error in the logs - "dyld: Symbol not found: ___stack_chk_guard"
Referenced from: /Volumes/Mac Installer/MacInstall.app/Contents/MacOS/MacInstall
Expected in: /usr/lib/libSystem.B.dylib
How do I fix this? Thanks,

OK, OSX can read that but not write, but...
A few options...
You could format that HDD as Fat32/MS-DOS, but you'd be limited to 4 GB Filesizes.
NTFS-3G Stable Read/Write Driver...
http://www.ntfs-3g.org/
MacFUSE: Full Read-Write NTFS for Mac OS X, Among Others...
http://www.osnews.com/story/16930
MacDrive for the PCs... allows them to Read/Write HFS+...
http://www.mediafour.com/products/macdrive/

Methodology used in implementation

Hi
Which is the best methodology used for implementing CRM system and what are all the tools available.
As a functional consultant wt are all the things I need to know while implementing a project
Points will be rewarded
Regards
Ajay

Hi Ajay,
The best methodology I would recommend is the ASAP methodology. You can refer to <a href="http://searchsap.techtarget.com/sDefinition/0,,sid21_gci871489,00.html">What is ASAP?</a> and <a href="http://www.purdue.edu/onepurdue/about/onepurdue_asap.shtml">http://www.purdue.edu/onepurdue/about/onepurdue_asap.shtml</a>
This will tell you all you need to know for a SAP CRM project implementation.
Reward with points!
Regards,
Sudipta

Why can't my Mac Pro use my hard drive(s)?

Ok, so I'm using a 2008 mac pro (some specifics are listed at the bottom) and I'm having trouble with my hard drive(s). The hard drive I've been using is full, and sometimes the System Information will show that is full of Audio, Movies, Photos, Apps, Backups or it's just chuck full of "Other."
But the problem is that my computer stopped using one of my hard drives a while back. It was called "Bay 5." I've opened up the computer to look at the hard drives and I actually have three. Ever since I lost Bay 5, I lost my Adobe Creative Suite and I've gotten a notification that says "The disk you inserted was not readable by this computer." But the drives are the same type as the Macintosh HD, only with 500 GB each. I've clicked "Initialize" on this notification (sorry, I tried to take screen shots but suddenly my computer says "You don't have permission to save files in the location where screen shots are stored") and it pulls up the disc utility and has a drive called "Media," (but only half the time). Bay 5 is not there and neither is the other drive that's there.
Wow, that screen shot thing is new. Maybe you guys could help me with that problem, too.
I'm lost. I've looked at 15 min. long youtube videos but none of them have helped. I just want to be able to use those hard drives. I've tried holding the D key at start-up so that the computer can do the Hardware check (or whatever it's called) but it just pulls up a flashing folder with a question mark.
I'd really appreciate some help.
Processor: 2 x 2.66 GHz Dual-Core Intel Xeon
Memory: 4 GB 667 MHz DDR2 FB-DIMM
Software: Mac OS X Lion 10.7.5 (11G63)

Buy Carbon Copy Cloner and some new drives. Make sure you have two backup sets and are using TimeMachine as well.
Reset SMC
You have a 1,1 2006 model. It is low on memory, which is cheap at $25 2x2GB now on Amazon
Consider that drives fail and you may have some drives that are more than 4 years old.
If you want, and have the money, consider investing in Disk Warrior 4.4 or 5.0
Data Rescue 4 has a demo and would try to find files, would need a recovery drive volume of course also.
Invest in an SSD for system boot drive, $119 / 250GB, and use a WD Black 1-2TB for data $120, another for TimeMachine.
Adobe CS needs more memory that you have.
AHT is not going to help and is on the OEM DVD with 10.4.x that it came with but what you need is boot from another drive or recovery mode and use Disk Utility (and or Disk Warrior). Single User Mode and 'fsck" is also useful as would Safe Boot. But you need a working copy (clone) backup too.
I like to have a nice small "Emergency" boot drive with just the minimum for system maintenance, 20GB is fine, some users create a USB flash drive but FireWire or USB2 work well. Or just designate and create a small 20GB volume on any of your other drives.

My final cut is running extremely slow after having for 6 months. I use external hard drives and save nothing on my computer. it takes a long time to render now. do you think something is wrong with computer. took it to mac store but they fail to help

my final cut is running extremely slow after having for 6 months. I use external hard drives and save nothing on my computer. it takes a long time to render now. do you think something is wrong with computer. took it to mac store but they fail to help me. I have a 13 inch mac book pro 10.6.8 8gb 2.3 gfz intel core i5

What did Apple tell you about what they did (or did not) find here?
See if working on the main disk is any faster.
USB2 is glacial, as I/O interconnects go. And USB2 disks have been known to fail, or sometimes to drop back to USB1 speeds, too. FireWire 800 is substantially faster than USB2, but still not as fast as the internal drive connections can provide.
Put another way, start varying your configuration, and see which configuration changes (still) have the problem, and which don't.

Using the Hard Drive from my old iMac

I have just purchased a new 2.8 Intel core 2 duo iMac and was wondering if I could somehow use the hard drive from my old iMac.
What I have done is buy a case for the hard drive from my old iMac thus making it an external. The question that I have is that since it [the old hard drive] is running OS 10.4 will my new Intel iMac even recognize it.
I would like to somehow switch ALL my vast iTunes library from the old hard drive to my new Intel iMac without have to resort to making as many as 15 data disk. If such a thing is possible how do I go about doing so?
Another thing that I would like to do once my iTunes library is on my new Intel iMac is use the old hard drive [since it is 500GBs] as the platform for all my games and my publishing interest. Doing so would allow me to free up space that I could more readily use for other interest on the 350GB hard drive that my new iMac came with.
HOW do I go about wiping the old hard drive clean so that I can use it thus?
Thank you all for any and all help and insight that you might give me.

You might also consider connecting the two computers into a network, and then transferring the files you need, or even keep both computers online and use network sharing to access files from both computers.
In reference to your question, if you extract the hard drive from your old Mac and put it in an external case, your new Mac will read it no prob. (10.4 is compatible with 10.5). The hard drive can be formatted (wiped clean) using Disk Utility application (click Application, Utilities).
In terms of importing files from old to the new Mac, you might consider using using the automated OS X feature to transfer user files from another Mac.

"Case use" technique for SAP implementation?

Hello all,
has anyone used "case use" technique for SAP implementation? I mean for standard process, not only developing.
Any recommendation about it?
Thanks in advance and best regards,
Adolfo

It would be helpful to go through the help document of ASAP Methodology.
The following information may clarify some doubts/requirements you have.
Generating the Project IMG through ASAP:
After you have set the project scope, the next step is to generate the Project IMG. From the Business Process Master List (BPML), you can directly access the IMG activities relevant for configuring each process.
BPML: The Business Process Master List, along with the Business Blueprint, is a key result of the second phase of the Roadmap. Microsoft Excel tables contain the SAP scenarios, process groups, and processes that have been set in scope in the SAP Reference Structure, and are crucial for configuring your SAP System. In Realization, the third phase of the Roadmap, the BPML provides the basis for monitoring and steering test activities and for configuring your SAP System. It contains the titles of the structure items, and displays the status, the owner, links to documentation and links to the SAP System. Amongst other things, the BPML allows you to:
1) Set your baseline and final scope. These are used for baseline and final configuration.
2) Access the Project IMG and specific IMG activities assigned to structure items.
3) Access integration test plans, which help you carry out all required integration tests.
The Prerequisite is you have set the project scope.
Process Flow to use the Business Blueprint as a basis for configuring your SAP System:
1) Set the project scope.
2) Generate the Project IMG.
3) Generate the BPML.
4) From a specific processes in the BPML, you can go to the relevant IMG activities and make Customizing settings.

Attempting to install Maverick, error message says I cannot use my hard drive as a start up disk.

The IT department where I work erased the hard drive and rebooted it to 10.7.5. In attempting to upgrade it to Maverick I encountered the error message saying that I cannot use this hard drive as the start up disk (or something to that effect). I read a couple of posts saying either to partition the hard drive or erase it entirely and boot from the recovery hard drive. Before doing any of that I booted using the option key, but did not find a recovery drive to boot to… only the disk0s2.
Some stats on my computer:
15-inch, late 2011
2.4 ghz intel core i7
AMD Radeon HD 6770M 1024 MB
C02H825CDV7P

The partition table is corrupt. Boot into Internet Recovery (option-command-R at the startup chime) and partition the drive with the default options (GUID format, one data partition.) The operation will destroy all data on the drive, so you'll have to restore from a backup.

Can Photoshop Cs6 Use all 12 Cores ?

Hi,
I'm purchasing a new Mac Pro 12 Core Desktop and I was wondering can Cs6 use all 12 cores of the processor ? Also, How much real ram can photoshop use ?
Thanks

You can read about it in this page: http://helpx.adobe.com/photoshop/kb/optimize-performance-photoshop-cs4-cs5.html
The more cores you use, the less you get from each additional core. Therefore, Photoshop doesn’t run four times as fast on a computer with 16 processor cores as on a computer with four cores. For
As far as Memory goes, 64-bit version of Photoshop CS6 can use as much RAM as you have installed on your computer.
Photoshop version
OS version
Maximum amount of RAM that Photoshop can use
CS4, CS5, CS6 32 bit
Windows 32 bit
1.7 GB
CS4, CS5, CS6 32 bit
Windows 64 bit
3.2 GB
CS4, CS5, CS6 64 bit*
Windows 64 bit
As much RAM as you can fit in your computer
CS4, 32 bit
Mac OS
3 GB
CS5, 32 bit
Mac OS
2.1 GB
CS5, CS6 64 bit
Mac OS
As much RAM as you can fit in your computer
What will really make a difference apart from RAM and processor is your Hard Drive itself. Faster drive equals lower processing latency, resulting in faster saves and so on. Your scratch disk highly depends on the hard drive that you use.

Pages '09 only uses one processor core?

Hello,
some days ago i had to open a document containing nearly 2.000 pages. Don't ask why.
Working with this document was quite complicated because Pages was responding very slowly. I used the activity monitor to see what was going on and i recognized that Pages only uses one core of my eight core MacPro.
I tested iWork on my iMac and MacBook Pro (both DualCores) as well: same problem.
Does iWork only use one processor core?
Kind regards,
roman

How much memory do you have in your system? I'll bet if you check activity monitor (applications/utilities) and go to system memory tab therein you will see lots of page outs. This happens with huge docs and little memory as the doc is being swapped between active operating memory and the hard disk The only way to solve this problem is to get more memory (not storage) in your system. For a 2,000 page doc you're going to need lots and lots and lots of extra gigs of memory. By the way - how big is the too big file of yours?
Number of processor cores isn't going to solve the issue if you have pageouts. It is a system memory/size of document issue and completely unrelated to how many processor cores you are using.

My external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive. Same thing has happened with Final Cut Express.

My new LaCie external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive.
The same thing happened recently between Final Cut Express and my other LaCie external hard drive used as the Scratch disk. It fixed itself.
I've run out of ideas. Help would be very much appreciated. Thanks.

have you done some searches on FCPx and time machine? Is there a known issue with using a TM drive with FCPx? dunno but ...wait...I'll take 60 sec for you cause I'm just that kind of guy.... google...." fcpx time machine problem" Frist page link
http://www.premiumbeat.com/blog/fcpx-bug-best-practices-for-using-external-hard- drives-and-final-cut-pro-x/
You cannot have time machine backups on your hard drive if you intend to use it in FCPX.
booya!

Using external hard drive connected to desktop as time machine disk for laptop

I recently purchased an external hard drive for the purpose of backing up my laptop and desktop macs. Both are running Mountain Lion (10.7.5). The desktop is physically connected to both the hard drive and to my modem. I have enabled pretty much every sharing option on both the laptop and desktop. When my router crapped out I began just using the internet sharing capabiilty.
I have been able to chose the desktop as the disk for backing up my laptop, but I want to use the hard drive (connected to the desktop) as the disk. I cant figure out how to do this yet. I can easily access the hard drive by using either the "connect as user" option. I thought that perhaps I could broadcast the connection somehow as an airport connection, but I don't know how to, or if this is even possible.
The desktop is a mac mini, and the laptop is a macbook pro. Both were purchased in mid 2011.

This may assist you:
http://pondini.org/TM/4.html
Ciao.

Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. I have a wndiws 7 system and use a Intel core processor. I have restarted several times and still ge this

Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. I have a wndows 7 system and use a Intel core processor. I have restarted several times and still ge this error. I have also tried to reinstall firefox and get the same error
== This happened ==
Every time Firefox opened
== today ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; MDDS; InfoPath.2; .NET4.0C; AskTbUT2V5/5.8.0.12304)

'''Kill Application'''
In Task Manager, does firefox.exe show in the '''Processes''' tab?
See: [http://kb.mozillazine.org/Kill_application Kill Application]
'''Causes and solutions for Firefox hanging at exit:'''
[[Firefox hangs]]
[http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit Firefox hangs at exit]
[[Firefox is already running but is not responding]]
'''Safe Mode'''
You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
See:
'''[[Troubleshooting extensions and themes]]'''
'''[[Troubleshooting plugins]]'''
'''[[Basic Troubleshooting]]'''
If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''one at a time''' until the problem reappears. '''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.

HT201250 If I use Time Machine on my MacBook can I use the hard drive on the same MacBook as the back up drive ?

I want to use Time Machine but instead of using a hard drive outside of the MacBook, would I be able to use the hard drive that is in the computer?
Would I be able to use a memory stick ?

It defeats the purpose of having a backup if you keep it on the same drive. That's your safety if your drive fails.
Also, you should allow about double the space of the volume you are backing up.
EDIT: Time Machine does keep local snapshots on your drive
http://support.apple.com/kb/HT4878
See this for more good TM tips...
http://pondini.org/TM/Home.html

HT201250 I had files stored on a hard drive that were not on my Mac. I used the hard drive for my first Time Machine back up, but it was not enough hard drive space to finish. Now those stored files are gone. Is there any way I can recover them?

I had files stored on a hard drive that were not on my Mac. I used the hard drive for my first Time Machine back up, but it was not enough hard drive space to finish. Now those stored files are gone. Is there any way I can recover them? No, they were not part of previous Time Machine backups, and I have checked both the hard drive the documents were lost on and the new one that I now use for backups. Any suggestions would be helpful, as the lost files are old pictures that are gone forever. :[ Thanks!

1. Yes, if both drives are formatted as Mac OS Extended (Journaled).
2. Reformat the drives if needed, open the Time Machine pane of System Preferences, and remove the drive with the pictures from the list of items set to be excluded.
(110331)

Methodology used in Hard Core Implementation?

Similar Messages

Maybe you are looking for