Metric Details 'Actual vs Target' Graph Cut Off

We have data loaded for about 13 months in SSM. When I select a metric on the IP scorecard and then view the 'Actual vs Target' graph on the metric details page, part of the graph is cut off.
Is there a way to increase the size of the graph so that portions are not cut off?
Thanks ahead of time for your help.

Hi ,
The graph which is displayed in the KPI details displays the data for 11 months. It is configured to work in that way. That is the reason why you are unable to see all the data.
Incase you want to check the complete data , you can create an associated report and then link it to the Scorcard - KPI.
Hope this helps
Vijay

Similar Messages

Linking from Hand Built Report to a Metric Collection for a Target System

I have some hand-authored reports that I would like to link into metrics details for the target system I've created the report for.
This would eliminate some heavy redundancy of data that I've put into the reports.
How does one create this type of link? There seems to be two primary interfaces, one where I point at a report, a second where I construct a URL and put it in the table (most likely hidden). This latter, I think, is what I want. And as I'm going into the metric details for a specific metric, can I consider the URL a "contracted" interface that won't break? For example:
/em/console/metrics/metricData?type=sun_storage_7000&target=isv-7110h&metric=LogicalInformation
I can assemble the above URL from mgmt@metric_current target_name and target_type and then hardcode the metric I want to go to and I will be good for all of eternity (at least 10.2.0.2 to 10.2.0.5)?
Paul

This technique works swimmingly and appears to be supported throughout the framework!

So I'm trying to get a window to fit my mac. Its a window on pokerstars if that helps, so no minimize/maximize. The window is actually too long vertical ways to fit the screen so the bottom is cut off? I hid bottom toolbar but still no help :-/ any help?

So I'm trying to get a window to fit my mac. Its a window on pokerstars if that helps, so no minimize/maximize. The window is actually too long vertical ways to fit the screen so the bottom is cut off? I hid bottom toolbar but still no help :-/ any help? Yeah i have no fit screen button, the top toolbar doesnt have zoom/minimize available... any help???

Hi RobSten1306
Send us an email if you need help on this case and we can help look into this for you.
You can email us using the contact the mods link in my profile under the section 'About Me'.
Thanks
Stuart
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Graph: x axis end value is cut off?

Hi,
I have a graph in a report.
My report accepts a date parameter, such as 07/01/2010.
If my date parameter is NOT in the month of January, my graph looks like this:
http://sites.google.com/site/misterpea/_/rsrc/1262841598250/home/2.jpg
If my date parameter IS in the month of January (doesn't matter what year), my graph looks like this:
http://sites.google.com/site/misterpea/_/rsrc/1262841594722/home/1.jpg
See how the end value in my x axis is cut off?
How do I fix this?
I have tried a few things already such as:
- expanding the graph width
- changing the graph's horizontal elasticity
- changing the graph's source code
The best thing I can get is in the graph's source code, I change the O1TickLabel textRotation to TR_HORIZ_ROTATE_90 instead of TR_HORIZ, which makes the date values display vertically.
I want to try and find a solution though where the date remains horizontal.
Has anyone come across this type of problem before?

Anyone?

Long Response fields when downloaded as a detailed view PDF of a single response are cut off

When a field in a form runs more than one line, the field is converted into a single line scrolling box when exported as a PDF for a single detailed view. It is readable by scrolling, but is cut off when printing it out, making hard copies useless.
Is their some formatting option I am missing? Can a field be expanded vertically?

Is the field a "multi-line" text field (its the second icon on the Add Item toolbar in the Design tab)?
If it is you can just make the field bigger by dragging the lower right corner.
Randy

Cut off from the world and spun a pack of lies - A...

Hi people I've signed up to this forum in pure desperation, maybe, just maybe there is somebody from BT listening who can be bothered to listen to my cries and put me out of my misery.
My partner and I decided to set up a BT phone and internet package shortly before we moved into a new property in October.
All was fine our phone and internet was activated on time and we were using it quite happily up until the dreadful day (November 25th) when it inexplicably got cut off...
Various phone calls ensued between ourselves and various chaps (at current count about 9) in BT's Indian call centres during which we were spin a whole range of lies. To give you a flavour:
- The exchange is being upgraded to give you faster internet,
- The phone line is down and being fixed tomorrow,
- Your account was never set up,
- You've never had an account with us,
- Are you a business???
Now, I’m not an angry man but all this deception did rather hack me off. But I was about to get angrier still.
Finally we got through to somebody from the order management team. A Scott if I recall, unfortunately I forget his last name, but he is based in Dundee. So Scott proceeds to tell me that our line was installed by openreach but the order was never closed out, if that happens something times out after 2 weeks and the line gets cut off. This is our situation. So, Scott tells me that he would expedite our reconnection within a week and would call us back in a couple of days.
A couple of days pass, no call, no phone, no internet... Five days pass, no call, no phone, no internet.
So finally I decide to call back. Learning my mistakes from last time I instantly bypass the Indian chaps and ask for the order management team. This time I get through to Laura. I explain the situation and she offers to pass me onto Scott (as he is dealing with the issue), great I think. I hold and hold until Laura comes back on the line, Scott is on his annual leave, he will not be back into the office for two weeks. Time to hit the wall!
So to cut a long story short I finally was passed to the elusive William. Suffice to say I was spun a similar story by William and he promised to call back, but no call, no phone, no internet. Just a pack of lies and broken promises.
It’s now two weeks since we were cut off and I cannot for the life of me get back in touch with the order management team in the UK, the people who should be able to actually do something. It’s an absolute disgrace that BT cannot resolve this problem in a timely fashion, I mean it’s not our fault, it’s theirs. My Partner is supposed to be working from home and she can’t. This is causing me a massive amount of stress, I just want it fixed!
Anyhow, maybe somebody is listening, probably not. But it makes me feel better to have a little rant.
HOW HARD CAN IT BE BT? YOU ARE A DISGRACE TO THE UK!
Rant Finished
P.S. No I don't want to email you back and explain my problem to yet another incompetent BT minion. I want somebody to call me personally on my number (it’s on your file) and sort the stupid thing out now! And Yes I will be reporting the issue to the regulator.

Hi Ernie_Wise,
Thanks for the post and welcome to the forum. I am sorry for the problems that you have had. I can help.
Please drop me an email to the email address in my profile, include your BT account details and the link to this thread. I will look into this to see what is going on.
Cheers
Sean
BTCare Community Manager
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

HP Designjet T520 Printing A3 cuts off at bottom

HP Designjet T520 Printing A3 cuts off at bottom When we plot something with AutoCad, and then print Portrait, it all prints fine except the bottom edge is slightly cut off. The paper we are using is A3, and the printer and Autocad settings is A3. Any ideas? WINDOWS 7 - NO ERROR MESSAGES

This very same issue is affecting me with T520.This happens with vertical A4 and A3, and till now I've not yet found a solution. To be sure to be within printer margins I've set the drawing actual margins on all the four sides to be 1.8 cm from paper sheets borders.But as alway I get the bottom border cut, while the upper border seems shifted downward and it's placed at 3,0 cm from the upper border of the paper. BUTif I set the page to be ORIZONTAL in the application, choose the orizontal page format etc the printout is perfectly aligned. To me this seems a weird issue.Experienced this issue using Archicad 16, Illustrator and Indisign. On OSX, from Snow Leopard to Mavericks. These are my printer details:Nome prodotto HP Designjet T520 24inNumero modello prodotto CQ890A Versione firmware AXP2CN1437AR

MPEG2-DVD / Sound cut off *urgent*

Hi everyone
I have a very urgent problem which makes me lose my hair...
We have 190 minutes of 1920x1080 25p footage which we edited in Premiere Pro.
I then proceed to export the files into MPEG2-DVD using 2-pass VBR with 1,65/4,2/6.25 bitrate (according to an online bitrate calculator).
I multiplex the sound into the MPEG-2 file.
When I import the timeline into Encore, it correctly tells me "do not transcode".
BUT the sound cuts off short of the video. It does it for every chapter. I cannot 'extend' or 'pull' the sound to the length of the video.
First chapter is 24:19, sound cuts off at 23:15.
Anyone got an ìdea what I am doing wrong?
Any help is greatly appreciated!
Michael

I'm in complete agreement with Jeff here as well - selling PAL discs in the US will sooner or later cause problems.
Priobably sooner.
In the old days you would not get the player to even load them - it would throw a "no disc" or another error of some description - and even when you did find the odd rare one that would load them, the TV systems would make sure you got a garbled image, or a B&W one. These days a good Universal Player will usually load all types (although again a regular DVD player will most likey still not go for it) but you will still have TV system issues.
The problem is the mains frequency - PAL (Europe) uses 625 lines and 50Hz whereas NTSC uses 525/60, which effectively means PAL runs at 25 frames/second & NTSC at 30 frames/second. The 2 are incompatible. Most PAL players can handle both formats either by outputting NTSC discs as PAL-60 or even genuine "on the fly" conversions to 525/60 NTSC. The process is not straightforward either - the player is handling scaling, temporal conversion and object motion analysis all at once (Hence why most PAL setups output NTSC as PAL-60 instead of pure 525/60 NTSC) and additionally the audio speed must be adjusted (remember DVD is a multiplexed set of VOB files, not separate streams) to conform to the different display rate - which may also prevent the use of a digital connection!
This type of conversion is much, much less compatible the other way around. Most NTSC players still cannot play PAL discs (although as I have said a Universal BluRay player may do this) and only a very small number can convert 625/50 PAL to 525/60 NTSC.
Let us now talk about MPEG audio & why it is not recommended to use it. This gets complex.....
MPEG audio is a multichannel format using perceptual encoding at 16-bit 48KHz. MPEG-1 Layer II and MPEG-2 BC (backwards compatible) are the only allowed forms and the MPEG-2 that is allowed - BC - is a matrixed format, not discrete, in surround use. Use of this type (MPEG audio) was only ever optional in NTSC, never mandatory (so that is one big problem) and the other big problem is that MPEG-2 audio is only allowed in BC mode. Why is this evil? Take a seat & let me try to go through it.
Because MPEG-2 audio decoders were not available at the time of DVD introduction, MPEG-1 was the only decoder available so that was what got used. As a result, the only permissib;le type of MPEG-2 allowed is BC, which is a matrixed stream type (the 5 main channels are matrixed into Lt/Rt stereo streams) and then encoded in the normal MPEG-1 Layer II format for DVD. The advantage to this is that a multichannel stream can be phase matrix encoded so that it will also play on a stereo system. MPEG provides pre-determined matrixing formulas depending on the intended audience - one is a conventional stereo signal, another is designed to deliver a Dolby Surround compatible (*not* Dolby Digital - that is something very different) system that re-creates the centre channel fronm the left/right channels in addition to a single rear (or surround) channel (Nerdy Note - this is actually a development of the old SQ Quadraphonic matrixing system, set up for LCRS instead of L-R-Ls-Rs). Additional discrete channel information, plus the LFE channel, is encoded in an extension stream so that an MPEG-2 decoder (not MPEG-2 Audio) can recreate 6 separate signals. Because of the necessity to be backwards compatible with MPEG-1 decoders the centre & surround channels that are matrixed into the 2 MPEG-1 channels (left & right) are duplicated in the extension stream. This allows the MPEG-2 decoder to subtract those signals from the matrixed signals, leaving the original Left & Right channels. All this adds an overhead of approximately 32kbps, making it rather inefficient.. The original 2-channel MPEG-1 encoding process was not developed with matrixed audio in mind and therefore may actually remove surround detail. Also, the process tends to expose coding artefacts as well so coupled with the whole shebang only ever being optional in NTSC 525/60 systems means that to use this as your solitary stream type is actually out of spec for 525/60 regions & players may well take one look at the disc & output...................in short, just a picture. And if that picture is 625/50 PAL, quite possibly not that either.
Audio support in DVD.
MPEG-2 audio is basically not supported except in BC moide, which hands everything over to MPEG-1 decoders. This is not good. It is not efficient, it can be riddled with artefacts & it is not supported by fiat in NTSC regions, only optionally. If it is your sole stream you will run into trouble sooner or later.
I hope this helps, and I think I will go away & write a little article about this as it keeps cropping up every so often..

Dowloaded songs are cut off

I purchased an album off of iTunes yesterday and while I've been listening to it today I have noticed several songs will not play to the end. These songs stop at about 30 seconds left, cut off and move on to the next song in the play list. In looking at other songs I've purchased recently, they are the same way. What happened? How do I get the full song that I paid for?
Thanks,
Amanda

Assuming you are in a region where you are allowed to redownload your past purchases, delete the current copies from your iTunes library and then download again from your purchased history.
Before doing so, it might be worth doing the following. Use the menu item Edit > Preferences > Advanced tab and tap Reset cache, then delete any files inside the ...<Music>\iTunes\iTunes Media\Download\ folder (or ...\<Media Folder>\Download\ if your media folder is at a non-standard location).
If the problem persists, or the redownload facility is not available in your region for the media in question then contact the iTunes Store support staff through the report a problem links in your account history, like this:
Report a Problem
Use the menu item Store > View My Account, in thePurchase History section tap the link that says See All, then tap the little arrow to the left of the purchase that includes the problem items, tap the Report a Problem button, and then the Report a Problem link for an actual item that won't work properly. Fill in the details and await a reply.
tt2

ITunes cuts off some of my songs at exactly 3 minutes 6 seconds.

I have a MacBook Pro running Mountain Lion with up to date updates. Strangely, the songs which used to play right through, now stop at exactly 3 minutes and 6 seconds. The songs also cut off when I play then through my iPhone 4 after sycing.
When I play the songs through VLC Media Player via Finder, they play right through perfectly.
I wonder whether this is a fault that's come about through one of the Mountain Lion updates recently.
I've seen a lot of posts with people's songs being cut off short but none make reference to the exact cut off time of 3 minutes, 6 seconds.
I have gone into Get Info for the songs in iTunes and specified the ending time of each song to the song's actual length but they still stop at 3 minutes 6 seconds. Most of my songs play through fine - it's just a bizarre handful.
I hope there's a workaround and would appreciate a solution.
thanks for your time.

Hello arcuspilot,
I would be concerned too if some of my songs were not playing all the way through in iTunes. Thank you for all the details you provided. You have gone through some really good troubleshooting steps already.
The next thing I recommend is checking to see if any third-party plug-ins could be causing the problem. You can find the steps to do that in this article:
iTunes: Troubleshooting issues with third-party iTunes plug-ins
http://support.apple.com/kb/TS3430
Thank you for using Apple Support Communities.
Best,
Sheila M.

Many songs on my iPad are cut off before completion, or are scrambled (bits of different tunes mixed in with other tunes).

I am running iTunes 11.0.3.42 on Windows 8, and am an iTunes match subscriber. I have approximately 2700 songs in my library - maybe 1/2 and 1/2 ripped from my CD collection and the rest purchase exclusively through iTunes. None of this music is pirated.
When playing this music back on my iPad, I am finding that many songs are cut off before they complete. When this happens, they continue to play, but it is just silence. Additionally, many other tunes are scrambled, with bits of other songs mixed together into one. When going back to iTunes on my PC, I will sometimes find that the songs play fine there - but sometimes they behave as they do on the iPad.
This happens whether or not I run my library with iTunes match on the iPad. I have redownloaded all my songs to try to repair this, with mixed results. It will often fix the songs that I was having trouble with - but then other songs will begin to show the same type of problems. I know that 2700 songs is not an immense library, but it is too large for me to systematically review the whole library - which makes tracking these problems very difficult.
I have seen similar types of complaints on the forums ranging over the last several years. It also seems that these problems have been "solved" by many different methods. Nothing I have found has worked for me - or only worked with the mixed results I mention above. I wonder if these individuals have actually been getting the mixed results I am finding.
This is truly frustrating, as I do not do anything exotic with my library, and have not pirated, but gotten my music honestly. I also have ripped my entire CD collection into iTunes, and have gotten rid of the CD's - as I have NEVER had similar problems to this in all the many years I have been using iTunes. Suddenly I find that I have a majorly corrupted library, with seemingly no way out. I cannot even abandon iTunes since I have such an investment in it. At a minimum of $.99 per song it would cost me almost $2700 to replace my library honestly, and that is at the low end of what I would pay. I don't know about you - but I don't have three grand to blow on replacing a music library I already paid for just to get away from a crappy product (sorry Apple - but what the heck else would you call this nonsense?). Makes a dude covet taking an eye-patch.
I am screwed and doubt there's a way out - but I have no choice but to ask for help. Anyone?

shameless bump

Black bands cut off full projection with DVI adapter

I used my DVI adapter for the first time today to connect my MacBook Pro (17") to a projector. I selected video mirroring from my System Preferences and ran a PowerPoint (for Mac) presentation in slide show mode.
The projector displayed the presentation but black bands appeard on my laptop display, which cut off some of the left and right side of the projected PowerPoint presentation.
Anyone know how I get rid of the black bands and get the full image from my laptop display projected?
(FYI, I use PowerPoint instead of Keynote because it's easier for my clients. I know, I know, that's sad.)

How are you actually connected to the TV? Does it have HDMI? Most non-widescreen TVs would not.
I would suspect a converter is either not outputting properly, your TV not interpreting the signal properly or you have some form of Zoom setting enabled on the TV.
How does your TV handle widescreen from say cable or terrestrial TV sources ?
Unfortunately AppleTV is not designed to be used with non-widescreen TVs so there's no setting on AppleTV to tweak.
AC

Hp printer cutting off the sides of a pdf document I am trying to print.

I am trying to print a pdf form to fill out, when I try to print it using my hp photosmart premium 309g the sides of the text get cut off the page.
I have been trying to find a boarderless printing setting in the printer settings on OS X 10.7 but have had no luck so far.
I urgently need to get this form printed so ny help would really be appreciated.

Hello macnewcomer22,
Please review the steps below to set Borderless printing, It can be configured within the Paper Type/Quality options.
For Lion, click the Show Details button to expend the print settings.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01368574&cc=us&dlc=en&lc=en &product=3793676&tmp_track_link=ot_search#N499
Regards,
Shlomi

Report for production order with actual and target cost for each

Hi
Is there any report that gives me the list of all production orders in a month with its respective actual and target costs?
I can use COOIS to get a list of production orders, then double click on the prod order, then click on goto and then to cost analyis.. but can i avoid going through all this and get a report with the details i need?
thanks in advance

Thanks a lot for that.
I'm a little confused with the columns in the report.
Which columns should I keep for my requirement? -
Production Order
Total Target Cost
Total Actual Cost
Total Actual Qty
Total Target Qty
Thanks

Having custom text for 'Actual' and 'Target' in Funne chart

Hi,
We see 'Actual' and 'Target' label values in funnel chart when we hover the mouse on the chart.
But i need to change the text to custom text for SINGLE graph. I dont want to chnage any xml or config files, I need this change in single report only.
Appreciate all your posts which helps.
Regards
MuRam
Edited by: MuRam on Dec 31, 2012 7:36 PM

http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Metric Details 'Actual vs Target' Graph Cut Off

Similar Messages

Maybe you are looking for