Metrics already built in BMM . How to point existing metrics to new source

The BMM layer is is already built and the metrics already calculted. The mertics should point to a new logical table source. Is there a way i can do this without having to redo all the calculations. May be duplicate the existing source tables and rename them to the new one's (As the new tables and the old tables have the same colums except 2 new keys which i can add after renaming). But i have to keep the old tables too as they are sources to other models too. Any Ideas are really appreciated.
Thanks

I have a very big rpd and the changes i am doing apply to only one logical subject area in the bmm ( one huge fact table in the subject area to be exact ) . Can i still use the nqUDMLGen command? I am trying to duplicate an existing fact table with all the same metrics but with a diff logical table source. I have to keep the existing fact table till we are ready to swap the old one for the new one as there are some reports running on the old one.

Similar Messages

How to parse reader comments in new source comment sections

I enjoy reading through the comment sections to articles in various news sources.   However, the good comments are often hidden in the over abundance of spam and mind-numbing commentary. I would like to write an application that will selectively
extract certain comments that I feel will most likely offer informative content (i.e. to reduce the time and my effort to find comments worth reading).   For example, mind-numbing comments which I wish to ignore general consist of single sentences
and it is not unusual for a comment section to have hundreds if not thousands of them. Conversely, many informative comments are much longer in length (e.g. two or more paragraphs).
I am proficient in developing desk top applications in a rich client environment but have only minimal experience working with web-related applications.   As such, I am looking for suggestions on how I should approach this small project and work
through it.
1) Is anyone aware of existing projects or sample source code which parses the contents of web pages using .NET?
2) It is possible to view the source of a browser web page. For example, in IE10 I from the main menu [View][Source].   The source includes the text of the article but none of the comments. That is, the actual comments are not
included in the rendered HTML (e.g. view the source for
http://www.cbc.ca/news/business/target-s-launch-into-canada-a-multifaceted-failure-1.2901789).   So how can I obtain the comments so that I can then filter the ones I wish to review and ignore all the others.
If I should be posting this request in another forum then please let me know.
ThanX
Ian

See the webpage below. The DownLoadFile method or the method I posted at the end will get entire webpage.
https://social.msdn.microsoft.com/Forums/vstudio/en-US/a75fb1e0-75a5-42eb-ad26-6d461eb94c69/why-my-calculation-using-while-and-substring-to-extract-string-from-text-is-not-extracting-the-right?forum=csharpgeneral#c743616a-ef72-4dd2-a22a-9c8c40ec784b
jdweng

How to point Itunes to a new location where music is stored Cannot locate music now it is on an external drive PLEASE HELP!!!!

Background Info
i have recently got rid of my Windows machine an am now using my MacBook as my main machine
On the old windows Desktop   i had my music set up as follows
Itunes libary information:
C:\Documents and settings\Lee Robinson\My Documents\My Music\
all of the Music files were stored on the PC as follows
G:\Music\My Music
Before i got rid of the machine i backed up all of my music and my iTunes libary files as follows to a External USB Harddrive that is now connected to my mac
Music Located @
/Volumes/AFRO-PORT/My Music
the iTunes Libary is located at the following
/Volumes/AFRO-PORT/My Music/iTunes
what i then did was to copy my itunes libary files at /Volumes/AFRO-PORT/My Music/iTunes to my local Mac machine .....
/Users/Afroboy/Music
Problem
Now when i fire up Itunes, i have all my playlists, ratings abum art etc...... but the problem i have is that itunes cannot locate any of the files. I guess that this is because my entire libary is still pointing to
G:\Music\My Music - as on my old windows PC
How do i tell itunes that this is no longer where i keep my music and for the actual MP3 files itself it needs to look at the following path
/Volumes/AFRO-PORT/My Music
... all file structures within these 2 file directories remain the same
I would really appreciate the heklp- my music collection is quite big and i dont want to loose any of the work i have done building it up over the past 5 years
Cheers
LR

Hi - thanks for the response
yes thats right, i have always kept my itunes folder and the directory containing all of my actual media seperate
all of the Music files were stored on the PC as follows:
G:\Music\My Music
Itunes libary information:
C:\Documents and settings\Lee Robinson\My Documents\My Music\
Your quite right, doing the above method that i have, turns it really messy when you when you try to move your entire collection. i saw this article earlier today
iTunes: How to move your music to a new computer - http://support.apple.com/kb/HT4527
..........wish i followed it before hand
The only Semi work arond i have found is to go to File> Add libary.... and brows to what is now my new external drive with all my music on /Volumes/AFRO-PORT/My Music/ .
Once the import was complete it effectivly dupicated my entire libary - So i then went to
File > Display Duplicates to show duplicate items, sorted by date and removed all the duplicate items
.... So far seems to have worked ok however i have lost my play lists, their all on my iPod anyway so all seems fine now
As you said iTunes wants you to do thinngs in a certian way and it certianly makes you pay if you dont. So now my question is, so i dont have this problem in the future..... do i
A) Manually move all of my Music files to my iTunes Liabry and have everything in one folder (If i move manually where do i need to copy all my files to?)
B) Start from Scratch and let iTunes do it, so i have everything on the external disk

Already own CS 6, how do I download onto my new computer?

I already own CS6 on my regular iMac. How do I now download it to my MacBook, when I already own the program?
Thanks,
Todd

If you downloaded it as a purchase then you might be able to find a download link in your Adobe account online.
Otherwise, you can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
Alternate trial resource:
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
http://prodesigntools.com/adobe-cs6-direct-download-links.html

How to Copy Existing values & make new entries in ISU Database tables TE609

Hi friends,
In SAP-ISU for a database table TE609(MR Reasons (Values))
how can I maintain the new MR Reasons, when I press F4 help, in the EL28 standard Transaction those new MR reasons must reflect in the Selection-screen.
There is one Maintenance view TE609T, I maintained the entries in it, but those entries are not reflecting in EL28 Tcode when I pressed F4 Help.
Please guide me in this...
Thanks in Advance
Ganesh

Hello Ganesh,
You are not dealing with the same Data Element (Meaning of the field).
In EL28, it's ABLESGRE - Meter reading reasons for single entry
On table TE609, it's ABLESGR - Meter reading reason
If you take a look at the domain of ABLESGRE, ABLESGRE , you will see that there are FIXED VALUES, that's where come your values.
For single entry (EL28), you can only use those values( Fixed Values from Domain of the Data Element).
Maybe what you need is to find another transaction to enter Meter Readings and not SINGLE ENTRY.
Don't forget to give me points if it's helping you.
Kind Regards,
Artur Moreira

How to move existing attachments into new external storage?

Dears,
could you pls advice is it possible to move attachments, stored in internal database (table SOFFCONT1) into content server?
I've read note 389366 (report RSIRPIRL), but i guess it doesn't work as expected, because document area is empty for SOFFDB repository.
will be grateful for any input!

The question seem not to be ESR related. Choose right forum to get an answer.
Regards
Stefan

How to sync existing itunes to new nano

just bought a new ipod nano MD477LL/A. I've followed all the directions to sync this ipod to my itunes library. Ipod shows that it is syncing, then when I disconnect, the songs never make it to the ipod. Any help would be appreciated. Thank you!

Go to "music"in your ipod menu then make sure that "sync music" is selected. If not, do accordingly the perform the sync again. Cheers!

How do I add an already built Shopping Cart (PHP and MYSQL) application to a page in a Muse site?

How do I add an already built Shopping Cart (PHP and MYSQL) (Cartweaver 4) application to a page in a Muse site? Do I have to export the Muse site as Html to dreamweaver and them use the extension to bring the shooping cart in or can I do it directly in Muse?
Message was edited by: mgv2048

We have experimented with doing this with some good success. We have been working on adding Cartweaver to a Facebook page by essentially adding a Cartweaver store to Facebook in an iframe. The "store" would be pages with just your basic product display, cart, and checkout functionality, with none of the "window dressing" - just use CSS to match the color and general look of the design it's being added to.
The one problem with this for Facebook is when it comes time to check out toy have to leave Facebook and go to your server where an SSL is in place. Fortunately in this situation this would not be the case, you can have an SSL installed to the root of your site and you'll be okay.
This is an interesting project. Give this a try and let me know how it goes and if you run into any snags, please make a post on the Cartweaver forums: http://forums.cartweaver.com - I'm really confident that this can work, and not only work, but work well.
Looking forward to hearing how this goes, and being of what help we can.
Lawrence Cramer - *Adobe Community Professional*
http://www.Cartweaver.com
PHP & ColdFusion Shopping Cart for Adobe Dreamweaver
Stay updated:
http://www.facebook.com/cartweaver
http://www.twitter.com/cartweaver
http://blog.cartweaver.com

How to add accessibility to already built application

Hi,
Can any one help me how to add accessability to already built application. jdev version which am using is 11.1.1.4.
Thanks in advance.
Regards,
lavanya.

Hi,
its mostly a configuration in ADF Faces
http://docs.oracle.com/cd/E23549_01/web.1111/b31973/af_access.htm
Frank
Ps.: One of the beauties of using ADF Faces instead of hand-crafted web site in which case you would have been screwed

How to Import already built EAR?

Can i import an already built ear file like i can in websphere studio??

I'm not sure
But you can import any single component and then modify or create the specific deployment descriptor for websphere.
Jin

How does point system works?

Dear all,
I am wondering how this point system works? I had 915 points this morning and now end up with 905. Instead of going up, it fluctuates from time to time. Initially, it use to show up next to my name with 915 but then that went down to 514???
Is it only me or someone else has seen this behaviour?
I am not points buff but it seems pretty strange that one day infact in the same day the numbers fluctuates like they do in stock exchange.
Regards
Jehanzeb

>
Amit Gujargoud wrote:
> I think you misunderstood His words and take it hard. Iu2019m sure he actually
> meant in a Cool way. Letu2019s wait until his morning, he will come to you with more cool way
Nope, in this case, Kartik already has "the hard way" behind him.
During an investigation into a nest of points gamers in October last year, Kartik was investigated as well for having for having participated in one of the threads. There were many being investigated. Other symptoms matched (we have some strict rules for this) - so the mistake was perhaps understandable - but on the other hand I should perhaps have looked a bit further to see that Kartik's post patterns were different to those of the others (who were not located very far away from Kartik..).
Anyway... as they faded away into the annual ponits total of those who are being transported into the world where the A.G. calendar is used ( Anno Guestus ) ... Kartik's ID faded away with them.
Kartik contacted me about it and I took his word for the expanation that he was not involved. I am very glad that I did that, as he has been a big help in the ABAP forums.
I don't have the exact figures, but last I heard we have deleted more than 50 thousand user ID's for ponits gaming. I am always very carefull when investigating this and there are other people who check it as well before any action is taken.
To date, to my knowledge, Kartik has been the only mistake we have made. Others have begged for mercy, but that is different. Hence my comment that he should wear the difference like a "battle scar" caused by the "journal entry", until Micheal can possibly fix it.
As you can see, "we are all guilty of something" (quote: Inspector Vimes)
Cheers,
Julius

When I open a new window (App etc) the windows already open disappear. How can I fix this ?, When I open a new window (App etc) the windows already open disappear. How can I fix this ?

When I open a new window (App etc) the windows already open disappear. How can I fix this ?

Back up all data.
Please triple-click anywhere in the line below on this page to select it:
defaults delete com.apple.dock single-app && killall Dock
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign ($) to appear below what you entered. You can then quit Terminal. Test.

Using Muse, I was wondering if there is a way to convert a website that is already built into a mobile website.

Using Muse, I was wondering if there is a way to convert a website that is already built into a mobile website. I have no idea how the website was originally built. My client is asking me to build a mobile site for his current site without touching his desktop site. His site was originally built in Dreamweaver I think but he have no way of finding the files and lost contact with his original designer. We don't want to start a new site from scratch with a new domain because he is afraid of losing his seo work.
In other words. My client site was build in Dreamweaver or something else. I am not a programer and was going to use muse to make his mobile site. So the question is how do I link a muse made mobile site to his desktop site?
Thank you.

as62467 We appreciate your G3 question! Let's see how we can help. What you are able to adjust is the USB connection mode by going to the home screen and selecting'recent apps' (in the touch keys bar), settings,storage, the menu (the 3 tiny dots) and tap usb pc connection. If you do not want the software to try and install choose either the internet connection or camera option. Let us know if this helps.
SheritaH_VZW
Follow us on Twitter

Replace sourcefile small or big change in source file if machines are already received old policy how they behaves

we have deployed package or task sequence into static or dynamic collection with always re-run or re-occurrence re-run settings . issue is need to replace sourcefile small or big change in source file setps need to perform stop advertisement and replace
new content update source version (update package) re-enable advertisement. now question is if machines are already received old policy how they behaves and if machines already installed package\task sequence how they behaves.

Peter is correct, however I think the crux of the question is what will the client do when the source files are updated in relation to existing deployments. The answer is nothing. Source file changes do *not* trigger deployments to be rerun. If the deployment
has not run yet, as Peter noted, the new files will get downloaded, however, if the deployment has already been enforced, there's nothing to be done as the point of the deployment to run the appropriate command-line. Once that's been done, a source file change
is meaninglessness.
Jason | http://blog.configmgrftw.com | @jasonsandys

I am already a Firefox user, how do I get rid of the new Firefox setup on my computer?

I am already a Firefox user, how do I get rid of the new Firefox 4 setup on my computer now?

http://www.computertechtips.net/64/make-firefox-4-look-like-ff-3-6/

Metrics already built in BMM . How to point existing metrics to new source

Similar Messages

Maybe you are looking for