Metronome is being recorded faintly in background. help!

ok, so here is my setup.
i own a Tascam US-122 interface. i have that plugged into my macbook pro. i'm using logic express 9. i have an electric guitar plugged directly from the guitar into my interface. i am monitoring my audio through my Tascam US-122 interface with headphones.
I go to record a track on my guitar, and of course, i want the metronome to play in the background for me while i record to stay on rhythm. so i turn it on and set it to my bpm.
after i'm done recording the track, i got back to listen to it, and i can hear the metronome in the background of my guitar track! WHAT!?
if you need any more information from me to help me solve this issue just let me know and i'll tell you.
please help me! i'm just trying to record a simple song! i don't want a metronome in my song!

bradhotdog wrote:
In Preferences>Devices>Core Audio, instead of having TASCAM US-122 selected for >both my Output Device and Input Device, i decided to change my Output Device to >'Built-in Output'
after I did that, i no longer get the metronome in the backgrounds of my audio >recordings.
This make sense cause the Logic output i.e metronome is routed to the "Built - In Output" and can not be sticked to the TASCAM Recording Input. In other words the TASCAM Input is set to record "What you hear".
Try to set the Preferences>Devices>Core Audio both I/O to TASCAM as they where by default but click the Input Device and see if there are more then one TASCAM inputs. If yes try all of them. Some audio devices has a regular Input option which can be named (IN type 1) and "What you hear" ( IN type 2) for example.
Some interfaces use special software editors to switch between these types, have onboard hardware switchers or it can be set in the OS AMS dialog. It must be something around that...
!http://img59.imageshack.us/img59/4967/aglogo45.gif!

Similar Messages

I have just bought a new iPhone and gave my old one to my Mum. My problem is that even with a new SIM and phone number I seem to be getting her messages as well as mine on my thread. They are also being recorded as both sent and received so she must be pa

I have just bought a new iPhone and gave my old one to my Mum. My problem is that even with a new SIM and phone number I seem to be getting her messages as well as mine on my thread. They are also being recorded as both sent and received so she must be paying twice for each SMS sent. Help please

Wipe iPhone/iPad/iPod touch clean
There are a few steps to do:
Switch off iMessage in Settings > Messages
Switch off FaceTime in Settings > FaceTime (iPod touch 4th Generation or later, iPhone 4 or later and iPad 2 or later)
Delete iCloud in Settings > iCloud > Delete Account
Finally Settings > General > Reset > Erase All Content and Settings.
Un-register your device: https://supportprofile.apple.com
Now you can sell/give.
Now, you should get her a new Apple ID to sign in the options above.

SQL Server Agent - Job History not being recorded (SQL Server 2005)

I have been trying to get to the bottom of an issue with SQL Server Agent not recording any job history. I am using SQL Server 2005 on a single Windows Server 2008 machine (i.e. no other domain controllers/active directory servers).
The SQL Server Agent service is configured to 'Log On As' NT user account 'sqlagent'. The jobs themselves are executed successfully (all 'Transact-SQL' type steps actually use the 'sa' account) however the there is no actual job history to be found for any
of the jobs -- in the SQL Activity monitor, the 'Last Run Outcome' is always 'Unknown' and the 'Last Run' date is always 'Never' for all jobs; in the SQL Job History Viewer there are no entries for any instances of a job being executed.
The 'sqlagent' NT user account ia a member of the 'Administrators' NT group; the 'Administrators' group appears under Security > Logins on the database server. I have another server that also uses the same setup with a 'sqlagent' NT user account, on that
database server the 'sqlagent' user account appears under Security > Logins and the SQL job history works correctly. I have attempted to add the 'sqlagent' to the Logins on the affected server using the SQL Server Surface Area configuration but this operation
returns an error, detailed below.
Additionally, I have attempted to use the built-in NT system account 'NETWORKSEVICES' to run the SQL Agent Service but this also results in exceptions in the error log and no job history being recorded. The entries in the error logs are very similar to those
from the 'sqlagent' NT user account but instead the user is referred to as 'NT AUTHORITY\ANONYMOUS LOGON' in the error logs, again these are detailed below.
Many thanks in advance for anyone's time and help with this issue!
Arthur
The following errors are raised in SQL Server Agent > Error Logs each time a job is executed:
Date 11/11/2012 18:30:01
Log SQL Agent (Current - 11/11/2012 18:30:00)
Message
[298] SQLServer Error: 18452, Login failed for user ''. The user is not associated with a trusted SQL Server connection. [SQLSTATE 28000]
Date 11/11/2012 18:30:01
Log SQL Agent (Current - 11/11/2012 18:30:00)
Message
[382] Logon to server 'XXXXXXXX' failed (ConnAttemptCachableOp)
If the SQLAgent service is configured to use the NT system account 'NETWORKSERVICE' then the following errors are returned instead:
Date 29/10/2012 18:30:15
Log SQL Agent (Archive #1 - 29/10/2012 18:38:00)
Message
[298] SQLServer Error: 18456, Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. [SQLSTATE 28000]
Date 29/10/2012 18:30:15
Log SQL Agent (Archive #1 - 29/10/2012 18:38:00)
Message
[382] Logon to server 'XXXXXXXX' failed (ConnAttemptCachableOp)
I have tried granting the 'sqlagent' NT user account with SysAdmin Server Role privaledges using the SQL Server User Provisioning tool in SQL Server Surface Area Configuration, but this always throws the following, similar error:
Login failed for user ''. The user is not associated with a trusted SQL Server connection. (Error: 18452)
===================================
Login failed for user ''. The user is not associated with a trusted SQL Server connection. (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=18452&LinkId=20476
Server Name: 127.0.0.1,1344
Error Number: 18452
Severity: 14
State: 1
Line Number: 65536
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at sqlprov.SysAdminServerRole.ProvisionInstance(Instance instance, String userName)
at sqlprov.ProvisionTask.Provision(Instance instance, String userName)
at sqlprov.MainForm.ProvisionTasks()

Hi Rama,
Thanks for your reply. I have run the query you specified and can see only one entry with "NTLM" in the auth_scheme column, all of the rest have "SQL". It figures that the entry with "NTLM" is relating to the one NT user account that can successfully log
in to the service (as mentioned in my reply to Nag above, this is the NT user account that installed the service on the machine). I have also executed the same query on the other machine that I mentioned in my original post and this contains two "NTLM" entries,
I'd assume that these relate to the NT user that installed the software and the correctly working "sqlagent" NT user account that is correctly logging the job history on that machine.
I think the problem is very much to do with granting access to new NT user accounts, as per the KB article that you have quoted above. In this case, it is not relating to scenarios 1 or 2 as these relate to SQL Server logins and this issue is about a Windows
Authentication login. As I mentioned to Nag above, I am unable to grant any NT user accounts with access to the service however the NT accounts are all defined locally on the same machine as the SQL server is installed (i.e. there is no domain controller,
active directory controller, etc) so I don't understand how the Windows login cannot be verified.
Any further advice on the issue would be greatly appreciated, please let me know if there is any more information I can provide to help diagnose the problem.
Many thanks!
Arthur

Contracts - 'Document still being processed in the background; try again la

Hello,
When trying to make adjustments to multiple contracts we are receiving the error message 'Document is still being processed in the background; try again later.' We have tried again later to no effect.
Ultimately, this means that these contracts (30 altogether) cannot be altered in anyway i.e. held, deleted, released, approved and it means that they just sit there.
This also has implications when raising another contract to replace these contracts. For example if you want to use the same vendor this will cause great confusion for our users when trying to select the correct correct to spend money against when raising purchase orders. Often the result is the user selecting the wrong contract.
Have you any suggestions on why this error message is appearing?
Many Thanks,
Sarah

1465740 - SRM document is stuck in the approval process
Symptom
Workflow hangs.
Workflow gets stuck.
SRM document in status waiting.
Approval process cannot continue.
SRM document frozen in status 'awaiting approval'.
BBP_PD 443 Document is still being processed in the background; Try again later
BBP_ICON_TEXTS 049 No workflow started. Application error occurred
Environment
SAP Supplier Relationship Management
Reproducing the Issue
Create or change a document in SRM.
Cause
*Not possible to identify root cause without further deeper analysis
Resolution
Find the object guid of your SRM document via transaction BBP_PD.
Then display the relevant workflow instance via transaction SWI6 using the following steps:
Select BOR object type.
Enter your object type.
Enter your guid (or document number in the case of shopping cart) in the Key field.
Select variant All Instances.
Select selection period All.
Hit execute.
Click on icon 'Display workflow log'.
Click on icon 'List with technical details'.
Click on icon 'Print Log'.
Record the date and time of the very last step in the workflow log.
Using the date and time of the last workflow step, here are some transactions that can be used to investigate the root cause of the problem.
SM58 - check for stuck remote function calls
ST22 - check for system dumps
SM13 - check for stuck update requests
SM21 - check in the system log for anything unusual
SWUD - run a consistency check on the workflow
Enter the task number and hit enter e.g. 14000044
Choose 'Test Environment' and flag 'Including parts'
Execute
Choose 'Consistency check for components' and flag 'Including subworkflows'
Execute
Red lights indicate an error in the definition.
Header Data
Released on 05.05.2010 09:53:08
Release status Released to Customer
Component SRM-EBP-WFL Workflow
Priority Normal
Category Problem

Document is still being processed in the background

Hi guys.
I receive this error when wanting to Change a purchase order in SRM. The PO is already in R/3, and the user has tried to make the GR in SRM. This GR then failed in R/3 because of incorrect accounting data, so I changed this in SRM. Then the PO changed to status Awaiting Approval, but we do not use any workflow for approving POs. Plus when trying to change the PO I get the message Document is still being processed in the background; please try again later. Well, this has been there for over a week now, and I have searched both this forum and also SAP Notes, but cannot seem to find anything that helps me.
There are no locked entries in the BBP_WFLOCK table, just as there don't seem to be anything in the RFC queues. I have checked the SC, PO and Confirmation in the BBP_PD, but no news here.
Something that interested me though is that in BBP_PD for the PO it seems that there are 2 active versions...?
Any other idea as to how I can "release" this Purchase order again?
Thanks for info.
DM

Hi,
Let me know the following things.
1. Do you see any approver in the approval preview of the purchase order , you have told that you are not using any workflows , but i wanted to make sure.
2.When do you get the message"document is still being processed in the background" ? is it when you change the purhcase order?
3) please have a look at the workflow log using the transaction 'SWI6', use the object type as bus2200 , use purchase order GUID and then see wether the setreleased has been run for the purchase order.
4) if the setreleased is not done , then you have to run the setreleased method for the purchase order.
award points if usefull
Message was edited by:
khan voyalpad usman

Bad workflow ? :-( document is still being processed in the background :-(

Hi guys,
I have activated workflow without approval for PO's (saved & changed: WS14000075).
Everything was working fine.. BUT.. For some reason, now some PO documents have the status "Waiting Approval", and if I try to edit them,I got the following message: "document is still being processed in the background"
How can I fix this ?
Thanks for your help guys !
Best regards,
Diego

Hello Diego,
I've already seen this kind of pb.
You should navigate to the admin workflow runtime (menu swld) then administration --> workflow runtime, there is some usefull transactions.
First check the customizing (SWU3) and ensure that workflow runtime is ok.
Then try to restart wi in error (SWPR and/or SWPC) and check RFC transactions (SWU2).
Rgds,
Pierre

Browsing history is not being recorded.

Browsing history stopped being recorded. Yes, I've set it to record history. And yes, I've checked the questions here and I've tried creating a new database and all it did was delete my entire history. Then it recorded history for some time and now it stopped recording again. Any help?

Which security software (firewall, anti-virus) do you have?
If you use cleanup software like CCleaner then check the settings for the Firefox application.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Current window keeps being placed in the background

Since switching to Mavericks, any window that I'm in keeps being put into the background. Is anyone able to help me with this??

See:
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]]

Using Pro Logic X to record. I have several tracks and I'm trying to record an audio track. I have the mic connect to Avalon 737 then into apollo interface. When I record all track are being recorded into that track. I can't just get the audio to record.

Using Pro Logic X to record. I have several tracks and I'm trying to record an audio track. I have the mic connect to Avalon 737 then into apollo interface. When I record all track are being recorded into that track. I can't just get the audio to record.

Thanks for responding. Everything seems to work right except for the when I plug into the 737. Ok let me see if I can be more clear. I had this set up done with two representatives of Neumann, and DBox. Here it is I hope this helps. 32 Channel snake (24 Inputs 8 outputs) Channels 1-8 from snake to my Octopre for Drums. From Octropre output quarter inch lines into the Apollo 2, quarter inch input. This is so that the Apollo 2 is taking the drum tracks. Snake Channel 9-12 into Apollo 1 channels 1-4 xlr. Snake Channel 13-16 into Apollo 2 Channels 1-4 xlr. Snake Channel 17 into the 737, output of 737 into Channel 5 of the Apollo 1 quarter inch.
Ok The Dbox. Sum output L&R into channel input 7&8 of Apollo 1. Apollo 1 output channels 1-8 into summing input channel 1-8 of Dbox. Apollo 1 main L&R going to main analog input L&R of Dbox. Spid out to DAW input of Dbox. I have both ADAT of both Apollos connected by optical wire. Also have port 2 of Apollo 1 into port 1 of Apollo 2 connected by Firewire. Let me know. Hope I got it right. Thanks for responding.

Is this background helpful for learning Oracle11i?

I have some financial experience and I have got the Oracle database Manageemnt OCP certificate.
Is this background helpful for learning Oracle11i?
How much time should I spend, another OCP's time?

Hi Frank:
Having a background in the world of finance plus an OCP is certainly a very good start.
However, 11i is a very different thing to "normal" Oracle, and so, too, is being an 11i DBA. I wish I could point you to loads of good study material, but there isn't that much around.
That said, I can recommend "Installing, Upgrading and Maintaining Oracle Applications 11i (or, When Old Dogs Herd Cats - Release 11i Care and Feeding) (Paperback)" ISBN-10: 1411616421, ISBN-13: 978-1411616424.
There is a website that may be of some use: http://becomeappsdba.blogspot.com/2006/07/installing-oracle-applications-become.html.
Also, have a browse around for similar. Finally, Oracle courses may be useful. I attended one - it was OK, but hardly worth the money. The documentation, though, is good and useful.
How long it would take you to become proficient is impossible to say, as it depends on your study materials, and the time you are able to devote to learning. But, it's not, IMHO, an easy, quick thing to pick up, even with OCP prior learning, etc.

Lync 2013 - Prevent user from being recorded (voice or conferencing)

Hi,
Is there a way to prevent a specific user (ex. a VIP) from being recorded in P2P or conferencing calls, whatever the general policies may be ?
Thanks for your help,
Luca

Agree with Paul, there is no native way of doing this. There's no great practical way either as the audio can hit a range of devices, so there's nothing much stopping someone from just downloading third party software and recording
it. But then again I can just hold up the recording app on my mobile phone to any device and I've recorded the call. I'd suggest disabling recording of conference calls for all users if this is a concern, P2P calls can't be recorded natively
anyway, but there's a billion VoIP recording apps that work with Lync.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Group Policy to clear down MRU lists and to clear or to prevent user login details for programs such as Remote Desktop from being recorded

Hi there,
Please can anyone instruct me on how to set up Group Policy to clear down MRU lists and to clear or to prevent user login details for programs such as Remote Desktop from being recorded. Your help would be much appreciated.
Kind regards,
RocknRollTim
P.S. I was redirected by a forum user off the Microsoft Community forum.

Hi RocknRollTim,
Agree with Jason. Using a script will be a better option.
Just addition, for history of RDP Connections, please open Registry Editor and follow the path:
HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client\Default. Please check if find MRU registry items where the name (or the IP address) of the terminal server is kept in.
Please also follow the path: HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client\Servers. It contains
the list of all RDC (remote desktop client) connections that have ever been established from this computer.
When expand Server folder and select a node, you will see the UsernameHint key that show the name of the user connected by rdp.
Please back up registry items to avoid unexpected issues before any operation.
If any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu
Thank you for responding back Justin Gu and I agree with both you and Jason Miller that a script can easily achieve this task. Thank you all for your help.
Many thanks,
RocknRollTim

Monitoring the track being recorded

Hello all!
Audition 3 - Is there a setting that will allow me to hear the track being recorded while I am recording it? I am using headphones and using a line in jack to input the guitar signal but when I hit play or record the program mutes the recording track.
I understand why its doing that, to prevent feedback. But I am using headphones and all sound is contained in the system. So I would like to hear the guitar through the head phones what I am recording.
Thanks for your help.
Jeff

Go to the Options menu and choose Monitoring/Audition Mix. You can then choose between Smart Input which switches to Input when you drop into record or Always Input. However I should mention that depending on the speed of your PC and the type of soundcard and driver that you are using you may suffer from latency that will cause a delay between you sounding the note and you hearing it in the headphones. If you are lucky this may not be enough to stop you recording. otherwise you really need an audio interface that uses direct monitoring to get round this problem.

'this call is being recorded'

I want to record conversations legally so I need some kind of recording that informs callers "This call is being recorded" beforeI answer the phone. Does Skype do that? Or does it depend on the recording program?
Also I have my Skype calls forwarded to my cell phone if I don't answer within a few rings. Can I set it up so Skype gives the "This call is being recorded" message or do I need a program for my cell phone?
Thank you.

Such feature is not available in Skype but there are recording applications that offers the option to inform the other party that their call is being recorded.
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
| skypefordummies.blogspot.com |

"Your call is being recorded" announcement

Hello,
I've a customer that needs the above announcement before sending the call to the DDI numbers. The extensions are being recorded by Witness Systems.
They only have CallManager and Unity.
I was looking at doing this in Unity by sending call to a call handler based on it's DDI in the Unity routing table. This would be forwarded on to a Call Handler specific to the DDI with the announcement then another Call Handler to transfer to the actual extension.
Problem.
1. What's the maximum amount of entries in the forwarding routing table?
2. If the subscriber already exists with the same DDI number the call is sent to the subscribers call handler instead.
Any help would be very much appreciated.
Regards,
Michael

Thanks for that. That's useful to know. I'm currently at 50 DDI's.
Regards.

Metronome is being recorded faintly in background. help!

Similar Messages

Maybe you are looking for