Mew...Help please sister's ipod not working!

Mine of course if fine but hers seems to just turn on and then the green light stays on and won't go off. I think I have tried to reset it but it does nothing. The computer recognizes and downloads songs onto the ipod but will just not unfreeze off of the freaking green light. If you know the answer please tell me!

Sorry, I don't have a solution, but I have the same problem. I have songs downloaded onto itunes and it plays, and it shows I have songs on my ipod, but when I take my ipod off the computer and turn it on nothing happens. All I see is the green light. It's so weird because it worked before I deleted all my old songs and put new ones on it, and now it doesn't. I think my problem is that I should buy songs from the itunes store instead of downloading them off of mp3 sites, I don't know what to say about yours...Does my problem sound like yours??? Sorry if I couldn't help.

Similar Messages

  • ITunes wont load Help Please Quick time now not working

    AppName: itunes.exe AppVer: 7.6.2.9 ModName: unknown
    ModVer: 0.0.0.0 Offset: 61707369
    Tjis is the error I get. I have tried unenstalling using Unenstaller Pro also tried installing older version of Quik time still no joy same message.
    Please help very frustrated I am not a computer wiz I just want to use the new nano.

    What error message do you get when you try to launch your QuickTime, 2 dads?
    You said you tried using an uninstaller package ... where you getting an error message if you tried to uninstall it using the Add/Remove programs control panel? If so, what did the uninstall error message say?

  • HELP!!!!...please help me...ipod not working

    my uncle bought me an ipod as a gift for me couple of months ago..and for about 5 months, i was able to upadte songs into my ipod using the MAC OSX...but now, i got a new labtop and has windows XP, i installed the CD and downloaded itunes 7.01..
    then when i connect my ipod with the USB, it reads the following:
    DO NOT DISCONNECT
    and my computer cannot read the ipod...i always have to reset it to listen to my songs, but i cannot update new songs..
    PLEASE HELP ME!!!!

    OK first see this article...
    http://docs.info.apple.com/article.html?artnum=61672
    One thing to note is that you can format the iPod as FAT32 (Windows format) and it "may" work on your Mac. So one thing you might try is plug it into the Windows machine and follow the directions here...
    http://docs.info.apple.com/article.html?artnum=60983
    Now that it is reformatted for Windows, go into the preferences and click on the iPod and click the box to "Enable Disk Mode". Now, take it and plug it into the Mac.
    It hopefully will show up on your Mac's desktop as a disk drive. You can grab your iTunes folder and drag it into the iPod to copy everything over onto the iPod's hard drive. Eject, move it back to the Laptop, open the iPod as a disk drive, and copy the iTunes folder onto your Laptop. You should now be able to add all your stuff to the iTunes library on that computer.
    Then delete that folder out of the iPod to free up room and then sync the iPod to iTunes on the laptop.
    How to use your iPod to move your music to a new computer
    http://docs.info.apple.com/article.html?artnum=300173
    Patrick

  • Help Please? Flash Player not working, windows 7 32 bit IE.

    Hi. I cannot get the Flash player to play content in Internet Explorer 32 bit. I am extremely frustrated.  My info is:
    Windows 7/64 bit
    All windows updates are current
    Dell studio 1749 Lap top
    IE 8 32 bit
    IE 8 64 bit
    32 bit Flash Player 10.1.85.3
    64 bit flash player "square"  10.2.161.22
    windows firewall
    High speed cable with wireless router
    Avast antivirus free  5.0.677
    I have spent several days reading this forum as well as other forums on the same subject and have tried many many suggestions that have been posted without results. I have checked my user account settings, mine is set to administrator. I have checked and rechecked Internet explorer internet option settings and tried them all including none ( set to not recommended  lowest  settings) for all the zones. I have reset internet explorer settings under the advanced tab. I have tried to install the flash player many times using both the auto install from the browser window as well as the manual download and install program from your web site many times. I have uninstalled from windows control panel and also using your manual uninstall program between each reinstall attempt.
    I have restarted both my computer and internet explorer after each install and uninstall so many times I can't count. There are many other things I have tried as per some of the things I have read but so far no success. The interesting thing i find is while trying to fix this problem i downloaded the flash player code named "square" 64 bit and it works perfectly using Internet explorer 64 bit.
    Internet explorere Adobe add ons are:
    In IE 32 bit add ons listed are;
    shockwave activeX control  - enabled
    get_atlcom Class  - enabled
    In IE 64 bit add ons listed are;
    shockwave flash object   -  enabled
    Files installed on my harddrive are;
    in windows/sysWOW64/macromed/flash
    Flash10k.ocx
    Flashinstall.log
    Flashutil10k_activeX.dll
    Flashutil10k_activeX.exe
    in windows/system32/macromed/flash
    Flash64_10_2_161.ocx
    Flashinstall.log
    Flashutil64_10_2_161_activeX.dll
    Flashutil64_10_2_161_activeX.exe
    I hope you are able to assist me in fixing this problem.
    Thanks

    Good Morning.
    I can not get the batch file to create a log file. Anyway the general message throughout the entire batch file report is that nothing succeded.  Each time it tried to create a reg key the resulting message is :
    Regsetsecurity error : 5 access is denied
    When trying to reset FP security permissions:
    Set security privilage : access is denied
    Warning  :unable to SeSecurityPrivilage privilage. This privilage may be required.
    Then when it tries to create file "macromed" error is
    Createfile error : 1314  A required privilage is not held by the client
    Anyway this gives you a general idea of what has happened running the batch file,
    I am starting to think we are spending far to much time on this ,but I enjoy the  challange to correct the problem.
    If this is due to a corruption or some such thing in the registry I could have reformatted and reinstalled My system complete in less than a day. This is the fourth day on this.
    If the User Accounts list me as the administrator and there are no other accounts how can I not have the required permissions?

  • HT1766 please help my ipad min is not working on the scren it says iPad disabled connect to itunes

    please help my ipad min is not working on the scren it says iPad disabled connect to itunes

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • My ipod touch 4g is not recognized in itunes nor does my comput recognize it !! HELP PLEASE... its not the chord

    my ipod touch 4g is not recognized in itunes nor does my comput recognize it !! HELP PLEASE... its not the chord

    Did you already try these suggestions? iOS: Device not recognized in iTunes for Windows

  • Search help for cost center does not work after SP upgrade

    Hi,
    Create a shopping cart in SRM and go to the cost assignment tab. When click on the search help to enter a costcenter, we don't get any search help screen.
    Thanks

    Kindly check note: 1259735 Search help of generic account does not work
    Additionally Check the 5th question/answer of note 815849.

  • HELP! MY TRACKPAD IS NOT WORKING

    GUYS. PLS HELP. MY TRACKPAD IS NOT WORKING IM USING BB CURVE 9300. IM FROM THE PHILIPPINES. BUT MY MOM BOUGHT AT SAUDI ARABIA. TODAY, IM PLANNING TO GO IN A SERVICE CENTER IN ORTIGAS. AS PER CONVERSATION TO THE CELLPHONE TECHNICIAN. IT WILL COST 800. IS IT TOO EXPENSIVE? HELP! IS THERE ANY OTHER WAY AROUND???

    Use the tab key to navigate around the Bluetooth Assistance screen and the spacebar to enter/select.
    If the tab key doesn't move to all controls then press Control FN F7   one times and try the tab key again.
    Regards,
    Captfred

  • Please Help! iPod not working!

    Please someone help me out, I really need my iPod tomorrow morning and its not working. When I plug into my Mac to sync it makes this creaky sound, i think its from the hard drive then my iTunes just freezes...Please Help!

    If you or a friend has access to a PC, give a try to CopyTrans Doctor http://www.copytrans.net/doctor.php
    It should fix your iPod up and then you can go on using it with your Mac.

  • Restore iPod not working...please help!

    I plugged in my nano recently to be met with this message "iTunes has detected an iPod in recovery mode. You must restore it before it can be used with iTunes." So I clicked on the 'restore' button in iTunes. I go through the restore process and it tells me "Your iPod has been restored to factory settings, and is restarting. Please leave the iPod connected, and it will appear in the source list once it completes the restore process". The ipod never appears in the source list and iTunes gives me the original message that it has detected an iPod in recovery mode and that I need to restore it! What is going on???!?!??!
    2nd gen iPod NANO   Windows XP Pro  

    Try changing the drive letter as indicated here.
    http://docs.info.apple.com/article.html?artnum=304503

  • PLEASE HELP ME!! Ipod not recognised in i-tunes or by computer

    My pod used to be recognised!! No probs, but now for some reason there is no "device" tab at the side and no recognition of it anywhere. But it still charges when plugged in?! I have tried the 5 Rs (as much as I can- can't do the last one because there is no device tab). I have tried to change the letter after reading someone else's Q, but the i-pod wasn't even located there. What is happening??? Any help is very much appreciated!
    P.S- I am using a lap-top- but have tried the steps contained in support but that also didn't work.
    HELP PLEASE!!

    Try to change the drive letter again, as describe here *[Change Drive Letter|http://support.apple.com/kb/TS1493]* but, before you connect the ipod, try this to make it show in Disk Management:
    Open iTunes
    Select Edit-Preferences - leave the preference window open in iTunes
    Then connect the ipod and follow the steps to change the drive letter.

  • Ipod not working: in need of SERIOUS help!

    Hi. Ocasionally my ipod freezes, so i have to wait untill my ipod dies, and recharge it. One day it froze, and while it was frozen i decided to charge it, and now it wont turn on. I tried everything; i held buttons, i flicked the hold button, and nothing is seeming to work. I just bought over $20 worth of new songs.. and im really upset my ipod isnt working. Please help me.
    -Amanda.

    I think your iPod is finished. It shouldn't have been "freezing" so much that you had to drain the battery, but now I suspect you've killed the battery as well (Li-On batteries don't like to be drained).
    You didn't have to post the same thing under 4 different questions.

  • Help! please! digital-in not working in vista with xfi ga

    I just bought a digital I/O module for my Xfi Gamer card. I was using the youppax driver set. I am not getting any sound from the Digital in on the card. Also the digital I/O selection is greyed out in my control panel. Does anyone know how to get the digital in to work? Next I think I will try to remove all the drivers and software for my xfi and reinstall the Creative Labs latest drivers, do you think that will help?I am sure other people have had this issue also. My primary purpose for my sound card is so I can do multitrack recording on my PC using the digital-in as the source. I have been doing this on my XP machine for years now. This is killing me, Help!!! Please!
    !!! Thanks,

    Robweese wrote:
    Could a Creative rep or an experienced user here please provide direction to me on how to proceed from here? Will the Digital I/O module work with my xtreme gamer card? If the Digital I/O module will not work, what do I need to purchase to get the digital in working on the xtreme gamer card?
    The Digital IO module connects to X-fi cards via the Flexijack, which on all of them except the XtremeGamer is an electrical connection. Unfortunately the XtremeGamer's digital flexijack functions are optical-out (only) instead, so the I/O Module won't work with it. The Product page for the Digital IO Module shows what cards it works with. The XtremeGamer doesn't work with the external IO console either due to the lack of the needed connector. Unfortunately this means there is no way to get a digital signal into that particular X-fi card. Sorry
    Dale

  • Please help!! Laptop is not working and needed for homework!!!

    I have a Toshiba laptop. The model is Satellite A215-S5837. The problem I have is this. Starting this morning when I turned on my laptop it was black for 10 minutes and then it starts loaing files. After it is finished loaing it goes to the regular Windows Vistas is loading screen. Then it goes black again and after 10 more minutes the mouse cursor shows up an nothing else. It nevr gets to the welcome screen where I can log on. It just stays black with a mouse cursor that responds when I move it. Please help quickly because I have homework ue soon for my summer class and I need to finish it tommorrow else I fail.
    P.S. Please don't tell me to restore my computer because I don't have my restore disk with me because I am currently studying abroad.

    Re: Please help, printer is not working "ink system failure" 
     12-13-2009 02:52 AM
    Please help, printer is not working "ink system failure" 
     13
    -12-2009 02:29 AM
    Hi,
    Any help appreciated.  My printer is Photosmart C7288 All-in-One Printer.
    As of 2 days ago my printer has not been working. It comes up with several error messages after I switch it on. The first one is "Ink system failure: Ink system has failed. Unable to copy, recieve faxes or print. Refer to printer documentation. Error: 0xc18a0105. Turn power off then on again." 
    However when I turn power off then on again via the 'power' button, ".ink system failure Then the same original error message comes up (0xc18a0105). This is the most frequent error message and won't go away. Then I also keep getting a message saying "Photo Tray Problem: Lift output tray up, verify the photo tray is pushed in until it stops, lower output tray". Despite the fact that I have not used the photo tray in several months and it is in the correct position. 
    So far I have tried switching the printer on and off several times using the power button. I also switched the printer off at the plug last night (after it had been properly shut down) and switched it back on this morning. I have looked through the printer documentation but could not find any troubleshooting advice for this kind of problem. I have updated the HP driver using software update on my mac, and the problem is still there. 
    I'm getting desperate now, I rely on my printer/scanner/photocopier a lot!
    Thanks
    karaman bera

  • HT5625 Have Apple i Mac and just given and ipod.  How do I download albums purchased on i tunes which are said to be in I cloud? Help please.  I do not have i cloud on the system preference menue?

    Have Apple i mac and just given i pod.  How can I download albums purchase on I tunes which are marked in i cloud?  Do not have I cloud on System preference menue? Help please - do I have to download i cloud from somewhere? Help please - Ronnie

    Dan Bryant1 wrote:
    How is one supposed to know this?
    maybe search [_*Apple support*_|http://www.apple.com/support> next time:
    http://support.apple.com/kb/index?page=search&src=supportsite.home&locale=enUS&q=transfer%20purchases
    happy computing !
    JGG

Maybe you are looking for