Mexican Payroll - what to know ?

Dear All,
We are about to start a new payroll project in Mexico, and I have some questions :
- What is the best time to go live ? Will it possible to go live in a middle of the year or should we start on january 1st ?
- What are the legal tricks ?
- How long does it take to do it?
Hope someone could help
I wish you all a great Week end
cheers
John

>
John wallace wrote:
> We are about to start a new payroll project in Mexico, and I have some questions :
>
> - What is the best time to go live ? Will it possible to go live in a middle of the year or should we start on january 1st ?
> - What are the legal tricks ?
> - How long does it take to do it?
Hi John,
I am not an expert in Mexican payroll, but let me share with you my experience in SAP HR.
1. The best time to go live is start of financial year. Payroll is about calciluating income taxes and social contributions and in majority of countries they are caclulated based on financial year.
2. Mexico is delivered as standard SAP solution. You can be sure that majority of legal requiremens are covered by SAP. Please refer to SAP materials to get more details http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PYMX/PYMX.pdf
3. It depends on complexity of customer: how many non-standard practises it has (e.g. special payments, compensations), how complex is time management, etc.
Cheers,
Vladimir

Similar Messages

For the Mexico. Last patch "Oracle Mexican Payroll - 12.1.x Mandatory Patch

I have EBS R12. I am from Mexico.
What is the lat patch for "Oracle Mexican Payroll - 12.1.x Mandatory Patches"?
Regards,
Guido

I have EBS R12. I am from Mexico.
What is the lat patch for "Oracle Mexican Payroll - 12.1.x Mandatory Patches"?Oracle Mexican Payroll - 12.1.x Mandatory Patches [ID 941743.1]
Oracle Human Resources (HRMS) Payroll North America Annual Patching Schedule [ID 216109.1]
MX Payroll Information Center [ID 1297853.1]
Thanks,
Hussein

Without Payroll What all Modules I can Implement in SAP HR

Without Payroll What all module I can implement in SAP HR?
Asfar as my knowledge is concerned We can Time Management. Training and Event Management, Performanace Management, Recruitment & E Recruitment.
I guess For Travel Management too Payroll is required?
My Question Can I implement Personal Cost Planning without Payroll? Is it required that i needto configure Basic Wagetype that is 0008 Is that is required to configure Basic Wagetype for Personal Cost Planning?
Could you please throw some light on this?

Hi,
According to SAP help you need to implement Organizational management at least in order to be using Personnel Cost Planning.
However, depending on the functions you require you need to implement other HR submodules and integrate with Personnel Cost Planning component. For this integration considerations please check below:
Integration With Other Application Components
aFunction Required
bComponent Required
1a Include all payment-relevant information from HR master data when creating personnel cost plans
1bPersonnel Administration (PA-PA)
2a Include all payroll results when creating personnel cost plans
2b Payroll (PY)
2a Include all training costs when creating personnel cost plans
2a Include personnel cost plans when creating the budget for Training and Event Management
2b Training and Event Management (PE)
3a Include compensation guidelines for employees or planned compensation for jobs and positions when creating personnel cost plans
3a Include personnel cost plans when creating the budget for Compensation Management
3b Compensation Management (PA-CM)
4a Include personnel cost plans when generating commitment or budget data within personnel budget planning
4b Position Budgeting and Control (PA-PM-PB)
5a Include personnel cost plans in planning for the entire company
5b Controlling (CO)
6a Detailed reports, planned/actual comparisons
6b SAP Business Information Warehouse (SAP BW)
Ref: help.sap.com
Regards,
Dilek

Hi, I have a Iphone 5. Its a little physically damaged at corders of steel band and now its not getting boot up. I am from INDIA and what to know what is the excat procedure for my phone replacement. Phone is under warranty.

hi can anone answer the question i have asked ??
Ques: Hi, I have a Iphone 5. Its a little physically damaged at corders of steel band and now its not getting boot up. I am from INDIA and what to know what is the excat procedure for my phone replacement. Phone is under warranty.

goelAkash wrote:
now who is responsible ?? I think the apple care people are responsible as the phone was charging when they cleaned that charging jack. fault is at their end.
It doesn't matter that the damage doesn't appear to be related to the problem you're having. Once the phone is damaged, the warranty is void.
Forum etiquette note: you don't need to post the identical response three times.
Best of luck.

What does knowing the number of "views" tell us about a thread.

10 Points to the person who can give a cogent, rational, non-apologetic answer to the questions posed below, which are based on the premiss set forth just before it. (Please feel free, if you see fit, to dispute the premiss).
PREMISS:
People might "look" at a thread for a whole host of reasons -- whether it be to read the thread and contribute, or just to lurk, or because the thread's title was ambiguous, or funny, or in some other way remarkable apart from any substantive value it may have, or, even, just by accident, because the person clicked on the wrong button and inadvertently "looked" at the thread for a nanosecond before exiting. And probably for other reasons as well.....
QUESTION:
In light of the foregoing, what does knowing the number of "views" tell us other than what it says, i.e., does it tell us anything apart from the number of people that have for whatever reason literally just taken a look at the thread?
If the answer to the above question is nothing -- i.e., the number of "views" tells us just that, the number of "views" and nothing more -- then why is this information so prominently featured, instead of, say, the information that used to be present under the old Discussions system, such as the number of unread posts in a particular thread, which is data that actually has a value as something other than a statistic. Knowing the number of unread posts indicates to someone following a particular thread, whether there has been additional contributions to the thread that should be reviewed if one is to remain current on the substance of that particular discussion. The extent of the additional contributions (if any) are readily apparent from the count).
The little, difficult-to-discern-on-my-PowerBook's-screen tiny blue dot can hardly be said to take the place of the unread post count, as it shows the same indicator for one new post as it does for ten or even a hundred.
Thanks for your help with this.

Hi Scott --
Thanks for your thoughtful reply. It did help, and I've even marked it "helpful" under the new, bizarre point system to evidence this fact. (BTW, my "offer" of a point award was more a misplaced attempt at sardonic humor aimed at deriding the new point system, with which I have a number of strong disagreements, than it was an effort to bribe thoughtful replies like yours. Please know that I really do appreciate the time and effort you took to get back to me on this and meant no disrespect by the "reward" point bounty).
That said, I do have one follow up. You write that "the idea behind this [use of "views" rather than number of posts unread] is that even discounting curiosity, boredom, funny title, et al., the number of folks that have looked at a thread should bear some relation to the number of folks who are having that issue."
I just don't think that that's the case. I don't think it sufficently discounts curiosity, boredom, funny title, et al. Those are some pretty powerful motivations for people to peruse this site. And there are many, many others as well.
Of course I can only speak with certainty of my own personal experience with the Discussions, but based on that, I know have "viewed" numerous threads on subject matters that not only wasn't I experiencing, but on subject matters that I couldn't possibly experience,because it concerned Mac hardware or software that I don't own or have never used.
In some cases, I looked at threads where the subject line sounded interesting, or amusing, or provocative, in other cases I looked at threads that concerned hardware or software that I once owned (and so I thought I might be able to help with the problem at issue), in still other cases the thread concerned software and/or hardware that I was considering purchasing (and wanted to know what I might be getting into). With regard to the former of those two reasons, I know there were many, many instances where, based on the title of the post, I knew that I could help and I viewed the post as a form of oversight (so to speak) to make sure that the responses being left were providing accurate and complete information.
In my "view," though clearly not in the "view" of the Mods, et al. for reasons (thanks to your post) that I can at least better articulate (if not understand or agree with), a thread's number of "views" is susceptible to just too many possible meanings to make it of any real use. The number of unread posts (and by this I refer to the old numeric value of posts not yet read and not that illegible little blue dot used in the new system) may not be perfect information, but it is certainly more useful in my "view" than the number of "views." (I apologize for those poor puns on the word "view," but in my "view" they were unavoidable, sort of. See what I mean
Anyway. I really do thank you for your reply and the time and effort you took to make it. But, alas, with each hour I use these New Discussions, the more convinced I become that my continued time on here is fading. With no more hope of leveling up, with even less hope of ever receiving any tangible sign of "thanks for your help" in the form of + votes (insignificant as they were, at least they were something, everyone like to feel appreciated), with the posts much more difficult to read on my PowerBook's screen and even more difficult to keep track of, and for a bunch of other reasons (some admittedly petty, and some that strike at the core of why and how I use this site), I fear that I will soon be saying farewell.
But till then, thanks once again for your thoughtful reply.

What we know about Blu-Ray

I have done quite a bit of research regarding Blu-Ray on Apple (or lack thereof) and here is what I have uncovered so far.
What I know:
The new DB+ encryption (used with commercial Blu-Ray movies) uses a new from of DRM which implements both a hardware and software decryption key to play movies (so only authorized blu-ray drives and playback software can be used to playback a blu-ray movie). Lacie's d2 Blu-ray drive is authorized to play Blu-ray movies but, so far, do to lack of support from Apple, the only way we can watch them is if we do so via Bootcamp. Furthermore Slysoft's AnyDVD HD will decrypt a Blu-Ray movie and even allow it to play on ACD graphic cards and monitors but this is also via Bootcamp since the software is Windows only. Therefore, it is currently possible to rip Blu-Ray movies in Windows and transfer them to the Mac OS. It is also possible to burn Blu-Ray (data) disks in Mac since the Lacie drive is cross-platform compatible.
What I would like to know:
Theoretically, when Apple finally does start supporting BD+ movies, the Lacie drive will have a leg up since it already has the hardware keys installed but this is pure speculation. There are two other drives I know of that are offered for the Mac Pro, one is sold by Fastmac and the other by MCE Technologies. These are both sold as 'exclusively' Mac drives.
First question, has anyone been able to find out if either of these drives are recognizable in Windows (via Bootcamp)?
Second, has anyone determined if they are capable of playing Blu-Ray movies (i.e. Do they contain the BD+ hardware keys)?
I contacted both Fastmac and MCE to ask these questions but Fastmac did not send a reply back and MCE sent a confused reply, not knowing what I meant by 'BD+ encryption key' which would leave me to believe they don't but maybe their marketing department doesn't like to talk to the engineers.
Has anyone had any experience with these devices or uncovered information I have missed?

Well, yes. All three of the afore mentioned drives will work with a Mac Pro. The Lacie drive is external so it can be used with numerous other Macs as well but the MCE and Fastmac drives plug into the Mac Pro's optical bay. So far as your HD camera is concerned, you simply import your video from the camera and Final Cut it (or whatever else you do to it) then use the newest version of Toast, which supports Blu-Ray, to burn your finished content. That will work with no issues. My concerns are focused more around which drives will work cross-platfrom (Lacie being the only confirmed drive so far) and which will be able to play encrypted Blu-Ray movies which, the Lacie, again, being the only confirmed, Mac compatable, BD+ player, even though it cannot yet play encrypted Blu-Ray movies on the Mac.
However, your movies, if you decided to go Blu-Ray, would not be encrypted and therefore would not have any issues playing on a Mac. So long as you have no concern of your Blu-Ray drive working with Windows, you can go with any of them and be just fine.

I found an iphone and this is american and I want to put it a mexican chip, what can i do to fix it?

I found an iphone and I don't put it a maxican chip, what can i do to fix it?, I went to place where fix it or unlock the iphone but they told me that i need a microsim or something like that. Can i change the IMEI in the company where i want the chip or the iphone doesn't have solucion?

Only the original phone company or carrier that the phone was on contract with and locked to can unlock this phone for you, so basically there is nothing you can do. You won't be able to use the phone, unless you know the original carrier. Then unless you have a current contract or have been a previous customer, they won't consider unlocking the phone for you anyway, so nothing you can do.

What to know before rebuilding your credit with secured credit cards

The higher your original CL, the higher they can be raised to new higher CLs. I remember using Open Sky secured card and the $200 CL never went up in a 6 months. I got a CreditOne card with a $300 CL and was increased to $500 within 3 months. Not surprisingly, when I applied for Capital One nonsecured cards, I started at $500 (the highest CL of my two secured cards). Your available credit is a factor in your score so the more money you can put into these cards, the better - bc your score will be higher and will give you a better foundation of starting CL in the future.
Keep in mind, there are of many fees associated with SCCs and make sure to take that into account from the get go. This can range to annual fees to monthly charges to even transactiom costs when you swipe. Read the fine print and find a reasonable card without outrageous fees. I beleive I used CreditOne bc they didn't cost as much as others.
When starting out, an upfront fee may kill your utilization the first month. For instance, if you have a $49 CL and upfront annual fee is $27, you're already at 54% utilization. And if you pay that immediately, it won't matter bc your remaining available credit will still be $22 and your first month reported to the bureaus will show high utilization (or in any lenders eye's - high risk). So find out what upfront fees will hit the first month and depsit enough money to stay under 30% UTIL. Build a healthy habit of not crossing 30% utilization and pay your cards off 10 days before they're due the first time around bc some companies take up to a week post your payment and you never want to be late. This way you know how to time your payments.
The amount of credit accounts also is a factor in your score so if you can afford to, get two or more. The best way to do this is apply for one, make your first payment that will typically include your upfront annual fee. Wait for that payment to clear, then apply for another card. Lenders see payments will often grant you cards with signs you pay your balances. This healthy process of applying for CCs can be used with the regular CCs you will be eligible for, usually in 6 months time.
Keep in mind that your reporting date is usually 3 days after your statement date and timing is key. Let's say you have a $300 card. You've used $75 to stay under 30% and you know your due date is the 20th of the month. You make a payment on the 16th for $75 and it posts on the 19th returning your balance to $0. The next day, your due date, the day closes in good standing. Within a 3-10 days the balance will reflect your credit report. Try to use 1-9% (or 29% max) of your CL in this window bc having 1-9% UTIL reporting is better $0 reporting and you don't have to carry a balance and pay interest. These rebuilder cards prey on those who cannot manage their cards. But that's not you bc you know the game and are here to beat the system.
You want move to $0 annual fee CCs asap so feel free to apply for unsecured CCs within 6 months. Capital One is known grant cards and forgive for past mistakes so apply there after 6 months if you're not aware of bettet options.
It also ould be a good idea to take $500 and deposit as a CD with your bank and use that as collateral for a secured credit card. Its the same concept as a secured card but you get interest back with your original deposit.
Hope this helps someone.
Much love,.
Romulus

Personally, I would keep your utilization down to 10% or less for a few months and lie low, just showing responsible card usage. Keep checking the Capital One prequalification page after that, and once you become prequalified for the unsecured Platinum, take the chance, as the prequals are usually pretty solid.
When you get your unsecured Platinum, use it a whole lot and either pay in full every month, or, like with your secured, keep it at 10%-below. Meanwhile, definitely pay your secured in full every month. At about 5 months, if you displayed heavy (but responsible) usage, they should give you a pretty good CLI--I often see people go from $300 to $1500.
By then you should probably have your charge-off paid for, so, while it won't remove it off of your report, it will help. You'll also have a decent unsecured card, and by then I would feel comfortable applying for another card and maybe closing your secured card after that, since it unfortunately won't graduate.
BoA has a secured card that will graduate, but their prequalification page is utter garbage, so you'll be taking a huge chance by applying, and there will be a chance at denial even with recon. However, if you do get it, it will be great to have an evolving credit card in your hand, as you won't have to close the line (as I'm sure you'll eventually need to do with the Capital One).
I dunno, I'm a pretty conservative person when it comes to this credit game, so my offered plan might be a bit lukewarm, but I think it might be pretty solid for you. Good luck, you can do this!

I have a Mac late 06 with lion and what to know what is the best protection/security software to get, Mc Fee or Norton or...

I have a Mac late 06 with lion and want to know what is the best protection/security to get, Mc Fee, or Norton,or...

None of the above.
Norton in particular is anathema.
You have Apple's Xprotect system built-in. malware definitions are updated at each Security Update.
If you feel the need for belt & braces, ClamXAV is the (free) tool of choice.
Your best security is still the stuff between your ears. Don't click on pop-up links telling you need a new codec or (especially) Flash Player. Use your common sense and you'll stay ahead of the industry.

Making iTunes forget what it knows about a CD

How do I make iTunes (for Mac) forget that it has ever seen a CD and everything it knows about it?
I put a CD into my iMac and iTunes popped up a window showing me the name of the CD three times, with slight variations, and I just took the default. I believe that was a mistake and I would like to make that choice over again. But I can't because iTunes remembers it has previously seen that CD. For example, it remembers the names of all the tracks. I would like it to forget all the track names and everything else it knows about that CD. How do I do that?

Thanks. I did not want to have iTunes forget all my CDs, just one of them, but your answer solved my problem. I temporarily renamed ~/Library/Preferences/CD Info.cidb and that was sufficient to make iTunes requery the database for the track names. That is what I wanted it to do, because that gave me the chance to select which online entry it read. It turned out that my original choice was okay after all; so I just put the CD Info.cidb file back.
Thanks again.

What to know which type of report is starting with letter G

Dear experts,
When i check zee transaction it is attached to a program starting with letter GPD6G7040Z9HTFY61----
U. The report name is like this. I want to know what type of report is this. If it is drilldown report. Who will create drill down report ABAPER OR FUNCTIONAL CONSULTANT. What is Transaction code to create this report. Is there any link which gives good explanation of this report. What is the use of this standard report SAPLKYPC, This report is also attached to this transaction when i execute it.
Good answers will surely be rewarded.

Please search for available information before posting, do not offer re-ward, one question only per thread please.
Thread locked.
Thomas

What EJB knows about client

Hi,
What information about client application can I get on EJB? For example Thread name of client that called this EJB.
It will be OK even if it's server specific API. I need it for Websphere and Weblogic.
What do I need it for? We have several applications calling each other via EJB. I'd like to trace transactions across the applications. For example user calls Web server W, W calls EJB on server A and server A calls EJB on server B. I'd like to identify and trace this call on W, A and B. Of course we can add some new ID etc. But I'd like to do it without adding new fields, if it's possible.
Principal of the client will not help since server A makes it's own login to B, not per user.
Thanks in advance.

double post [http://forums.sun.com/thread.jspa?threadID=5433084|http://forums.sun.com/thread.jspa?threadID=5433084]

"I wish I knew then what I know now" - tips from Zen Xtra Veterans to Newb

I've just purchased a 60 GB Zen Xtra and very much looking forward to building a library... I've been perusing the forum here and was hoping that some Zen Xtra veterans might offer their top 5 tips to a newbie
While this is my first Mp3 player, I've been downloading and burning concerts to CDs for years, so I'm sure I'll be able to figure out the basics on my own... really looking for those tips that "they don't tell you about" that often make a big difference in a positi've experience
FYI - for what its worth, the majority of what I'll be putting on my Zen Xtra will be free and legal concerts available at www.archi've.org -
While it seems like many of these shows are "tagged" with song title, artist and date of show, it seems that many simply retain only the file and track number designation
for example, the 5th track from a 2-25-990 Grateful Dead concert will probably appear as gd90-02-25dt05_vbr.mp3
So rather than "renaming" each track I think I'm just going to have to accept the fact that the name of the song itself will not appear - and I can deal with that as I expect to have my player set to a random shuffle for the most part anyway, or will otherwise listen to any concert straight through
So if there are any other helpfulf hints from Zen Xtra vets who have a lot of jambands downloaded, I'd appreciate your input and advice...
For example - as with burning a show to CD, in listening to a concert I'd prefer not to endure a 2 second delay from song to song within a sho - is there a setting so that there is no "gap" between songs in a concert, as the tunes often run together?
Any tips would be appreciated.
Thanks!
Message Edited by casique2000 on <SPAN class=date_text>-09-2005 <SPAN class=time_text>07:34 PM
Message Edited by casique2000 on -09-2005 07:5 PM

Thanks for the feedback - I'll look into this and at least learn how to properly tag, determine how much time and effort it takes (I'm somewhat lazy)
From a practical standpoint however, the jamband concerts I will listen to will have songs that are played on numerous nights (the draw for fans is that no two versions are ever the same, and in fact are often quite different)
As such the same song will appear many many times in my library - I don't expect to go "looking" for a particular song and and although I might consider bookmarking some better performances, ultimately I imagine I'll cue up a show and simply skip ahead past any songs I don't like
In that sense I think I'm different from a lot of users who use the Zen Xtra - and with the file names already reflecting band name, and the date of the concert - I expect that should be good enough for me as I would likely be inclined to listen to an entire show
Really appreciate the feedback though - thanks... and still am wondering whether or not there are going to be "gaps" between songs and if there's any way around that

What to know the logic of this program :RV60SBAT

i need to change this program based on my requirement , but i don't know the logic of this program ,there are some puzzles about the logic of the program. the requirement is that: when create the batchjob, the number of the batchjob is fixed , and the steps of the batchjob is also need to fixed, but the per step that contain the number of the customer is dynamicly. how to do it .i need to fix the step of the batchjob ,how to do it ?
it is very emergency . who can give me some useful suggestion?
Thanks in advance.

Hello, Ming.
I'm not sure whether this will solve your problem, but check OSS note 652219. It describes an adjustment to the SDBILLDL program so that you can schedule it directly in background instead of it being "spawned" by the RV60SBAT program. That way, it can be a "fixed" scheduled job.
Hope this helps!
Cheers,
Des.

I have CS4 Web Premium and I am what to know if there are issues in this pack in Mac OSX 10.10 (Yosemite) operation system?

I am trying to get support in CS4 Web Premium, but I could get any support from Adobe (there is no phone, e-mail or chat for this problem). And the support page is a loop to go nowhere.
I hope I will find my answer here, hopefully. Otherwise is better to star looking for answers in other places than in Adobe.
Thanks anyway.

Thanks for your time and your reply.
And I do understand what you are saying, but client support can be as simple as the ability to send a direct e-mail and receive a diret answer, even if is it "Is not possible".
From my own experience, small software companies can do it, and even open source software companies do it, with much less resources (probably they have a big will in provide a good service).
And for a big company can be as simples as 1-2 days testing, for main tasks and give some feedback to many, many users.
Unfortunately, some big companies like Adobe just don't care. Unfortunately. So I will start looking to companies o actually care.
But anyway, that's my decision.
Thanks once again, I will see, somewhere else.
Cheers

Mexican Payroll - what to know ?

Similar Messages

Maybe you are looking for