MF4150 scanner not work on windows 10

Hello everybody, after fill this long procedure: http://community.usa.canon.com/t5/Printer-Multifunction-Support/MF-4150-Scanner-Problem/td-p/76522 and install all the newest driver / Toolbox, I still not able to scan from my device. Inside the device manager I can see under scanning devices an item called Canon MF4100 series and the so tell me that the device is working ok. Therefore, with Toolbox, when I press any scan button, no windows appeare. I have try also with the Microsoft Scanner application from the store but the application stay on wait... status for ever. Also in Toolbox settings there is the Canon MF4100 series as device to use but nothing is possible. Thanks for the attention. Marco

I had a similar issue after upgrading to Windows 10, and through trial and error, I fixed it through permissions. Try this: Find the folder where the photos/documents are normally saved.
Right click and select Properties
On the Security tab, select your username, or the home group, in the list of user names
Click 'Edit'
Click on 'Allow' for all permissions.
Click 'Apply' Hope this helps you too

Similar Messages

  • HP 3050 Scanner not working with Windows 7

    My HP 3050 worked fine with XP. Now that i have a computer with Windows 7, the scanner will not work. I called HP, and they do not have a fix, and their Windows 7 computer with HP 3050 scanner works the same way. Do you have any suggestions?

    Hi Donaldparis,
    After researching from the HP website, I realize that they do not release the HP LaserJet 3050 All-in-One Printer driver for Windows 7. It means that you will install the Windows 7 built-in basic driver and use the basic features. For more information about how to install the basic driver, you may refer to the following link:
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=3463669&prodTypeId=18972&objectID=c01856597#category4
    Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    If it does not work, you may also try to install the printer driver for Windows Vista under compatibility mode.
    Install driver under compatibility mode & Administrator level
    ==================================
    1.Right click on the exe file for driver and click Properties.
    2.Click on the Compatibility tab.
    3.Select “Run this program in compatibility mode for.”
    4.Choose Windows Vista (Service Pack 2) from the drop down list.
    5.Select “Run this program as an administrator” option under the Privilege Level topic.
    6.Click Apply, click OK.
    7. Please double click on the exe file again.
    Good luck!
    Arthur Li - MSFT

  • Canon PIXMA MP140 Scanner not working in Windows 7

    I have been having problems in getting the Scanner function to work properly in Windows 7. This is the message I receive everytime I try to scan or preview a scan in Windows 7:
    Cannot communicate with scanner.
    Cable may be disconnected or scanner may be turned off. Check status.
    Scanner driver will be closed.
    I have installed the latest drivers from the Canon Support website. I have even tried installing the latest Windows XP driver in Windows 7 with no effect. I have also tried using a different USB Cable and connected the USB Cable to a different USB Port on my Computer with no luck. 
    The Scanner works fine in WIndows XP SP3. I upgraded my Computer to Windows 7 SP1 and now have a problem with the Scanner. 
    Any ideas? It is supposed to work in Windows 7 I've checked the Canon and the Microsoft website which both say that its compatibie. 

    This printer/scanner is NOT compatible with Windows 7 32-bit. 
    I tried installing the latest MP Driver v1.06 and the MP Navigator 3.1 software in Windows XP compatibility mode and Windows Vista compatibility mode. 
    I even tried using the MP Driver v1.00 and MP Navigator 3.1 software (provided on the CD-ROM that came supplied with the printer) in Windows XP compatibility mode and Windows Vista compatibility mode. 
    I only had slight success with the MP Driver v1.00 which comes supplied on the CD-ROM with the printer.
    When I installed this driver in Windows XP compatibility mode, it wouldn’t scan in MP Navigator 3.1 at all but in Windows Fax and Scan it would let me preview a scan then complete a full scan. But would then refuse to preview or scan anything else after that unless I turned the printer on and off and restart the computer. 
    This is obviously a driver compatibility problem with Windows 7. 
    I’m amazed at how Canon has tried to pass this printer/scanner off as being compatible with Windows 7 when it clearly isn’t. I know it works with Windows 7 64-bit but lets face it most people are using 32-bit systems not 64-bit.
    It looks like there hasn’t been any proper testing done by Canon. Its poor form from Canon and the lack of replies in this thread is deafening. Seeing as this is the official Canon forum I was hoping there would be at least 1 or 2 replies saying try this and try that but I’ve tried everything there is to try at my end and I’m at a loss at what to try next.
    I won’t be buying any Canon products in the future because of the poor after sales service and outright lies about compatibility of one of their products with newer Operating Systems. My next Printer/Scanner/Copier all in one will be an Epson or a HP.

  • HP7520 Scanner not working on windows 8.1x64 bit PC

    Scanner Does not work on my win 8.1X64 PC neither wireless, not usb. Everytime I try I got an error message
    It works on my wifes's win7 X32 bit PC.   I have run HP Doctor,  and it says :
    unistalled and reinstall latest software, but nothing.
    Device manager shows this : Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19).
    It wont let me updrade firmware. I tried in different PCs win 7X32, usb and wireless and still nothing. It displays "an error was found" when attempting to upgrade firmware.
    Of course I checked all the requirements, on my 2 PCs, through USB cable , but I always got the same error message.
    According to my PC , the firmware version is ELM1CN1409AR. However, the firmware version on HP website is ELM1CN1320AR (older?). My PC is a Win 8.1 X 64 bit, Asus Z87 pro motherboard, Intel i7 4770k processort 16GB Kingston Hyperx ram, Nvidia GTX660.
    I don't know what else to do. any Help would be appreciated.
    This question was solved.
    View Solution.

    Welcome to the forums mvcad!
    I saw your post about the installation issue you are facing with your Photosmart 7520 model. I will gladly do my best to assist you with this! Thank you very much for all of the excellent screen shots as well by the way! I have some questions and something for you to try to start out with.
    Are you able to make copies from the printer itself?
    If the copies are working fine, remove/uninstall the printer from the Device Manager, complete a Clean Boot and Disable your Firewall (Re-enable later) and then try to run the installation: HP Photosmart 7520 e-All-in-One Printer Download.
    If those steps don't do the trick to have the printer installed correctly, please answer the following question and let me know the results from the above steps.
    You mentioned you have tried installing the printer on 2 PC's. Are they both showing the same error when attempting to install?
    Thanks for posting in the community, hope to hear from you!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Validity fingerprint scanner not working on Windows 10

    I downloaded the Validity driver from the website, but my fingerprint scanner isn't working. When I was running the Insider previews it did work and I was able to use Windows Hello. But now with the full version, it does not work. Is there an updated driver or one from another device that would work?

     Your solution might depend on your particular setup. Reference:HP ENVY dv6t-7300 CTO Quad Edition Notebook PC ========================================================================Scenerio 1You have HP SimplePass installed -- and you did not say whether or not this is the case -- AND you are running (some version of) the original Series 6 HP SimplePass program that was installed (shipped) with your computer.  This Series of the program may, or may not, want to run in your new Windows 10 Operating System. I have read one member's claims that Series 6 HP SimplePass, that is, HP SimplePass probably version 6.0.100.276 -- does run in Windows 10.  I cannot verify that is the case. How? Reinstall the existing Validity Driver:Uninstall - do NOT delete the Driver from the Device ManagerReboot (Restart) the computer and log inCheck to make sure your Sign-Options are set in PC Settings If your Series 6 HP SimplePass program is not behaving itself, that is, the program starts and then balks, the Splash screen starts / stops / flashes / freezes, then you might try:  Hard Reset / Forced Reset"Repair" the SimplePass program (Programs and Features)Tryoverloading the program, that is, installing the program over the top of itself without removing the existing program from the computer. ========================================================================Scenerio 2 You have been running Series 8 HP SimplePass. There is a new Windows 10 compatible Series 8 HP SimplePass program available:sp71729 HP SimplePass V8.01.46A W7-W10 32/64bit How? Reinstall the existing Validity Driver:Uninstall - do NOT delete the Driver from the Device ManagerReboot (Restart) the computer and log in Download and install the new Series 8 HP SimplePass programPackage will likely download to your Downloads folder >> Double-Click to installReboot (Restart) the computer and log inCheck to make sure your Sign-Options are set in PC Settings========================================================================Scenerio 3 Some odd combination of other factors not listed In any case, you want to reinstall your Validity Sensor Driver. You can likely use the Driver for Windows 8.1 you already have:sp58900 Validity Sensor V4.4.234.0 Win8-Win8.1 Windows 10 Native LogonEven if you do not wish to use HP SimplePass -- or if you have never used it and do not even have it installed -- once you have reinstalled the Validity Sensor Driver, you might check / adjust / manage your PC Settings > Accounts > Sign-in Options Windows Native logon can get you logged into the computer with your fingerprint -- so far, it cannot log you into Web Sites.   Reference, Help, Tips:Instructions to Upgrade HP SimplePass Read the first page: Dragon Document Guidelines   When you see a Post that helps you,Inspires you, provides fresh insight,Or teaches you something new,Click the "Thumbs Up" on that Post. Click my Answer Accept as Solution to help others find Answers.
      

  • Canon mf4720w scanner not working on windows 10

    i've updated to the latest windows 10 driver. printer is working fine but the scanner is not. the mf toolbox doesn't recognize the driver... 

    OK, after reading about people having the same problem after upgrading to Windows 8.1, it appears all you have to do is uninstall the Toolbox and drivers, re-install them, and after rebooting the computer everything seems to be working again.

  • 7650 scanner not working on windows 8.1 64 bit Dell

    I have downloaded the 8.1 64 bit software/drivers for the 7650
    I have downloaded hp print doctor
    hp print dr runs it's diagnostic and quits at the driver scan and refers me to hp support.
    I have newly installed the software 
    unplugged and turned off the scanner
    turned the scanner back on
    restarted the computer
    same result.

    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
    I hope this helps!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • M1522 nf scanner is not working for windows 8.1

    till windows 7 scanner & printer is working.
    windows 8.1 scanner is not working.
    i tried all the softwares in page http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=3442754&spf_p...
    please update your softwares that are not working for windows 8.1

    Hello Nani134,
    To get your issue more exposure I would suggest posting it in the commercial forums since the HP LaserJet M1522nf is a commercial product. You can do this at HP Enterprise Business Community.
    The support page for your product may be helpful in the meantime:
    HP Support Center.
    I hope this helps!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Just upgraded my Cannon MP Navigator App for my multi-purpose printer/scanner not working correctlly

    After upgrading to Yosemite MP Navigator App for my Cannon scanner not working properly, Buttons are not active and do not respond .... it works on my laptop with Mavericks ... I will be reverting back to Mavericks .. I use my Scanner a lot . Apple please fix this problem.

    I have the same problem with a Canon MP530 under Yosemite. I'm not sure why Canon can't get their act together to have updated drivers and software. Very aggravating.
    I can confirm that pmt513's workaround works. That's fine for single pages. But what about batch scanning?
    Here's another partial workaround. The main MP Navigator interface still allows you to do the scanning, both single pages and batches. You just can't save, send, or export those scans. But the temporary files are on your disk in TIF format. If you don't mind taking those and converting them to PDF or JPG (which you can do in Preview), then just look in the following folder to the files:
    ~/Library/Caches/Temporaryitems/MP Navigator 2.2/SCN_MFP
    I have put an alias to it on my desktop so that I can easily access the scans. Be sure to copy the TIF files out before you close (and thus clear) the MP Navigator window as that also clears the files from that cache folder.
    I hope this helps some of you.

  • Exporting Crystal Report to HTML is not working in Windows 7

    Hi Sir,
    I am trying to export Crystal Report to HTML format using VB.NET code. Functionality is working fine at Windows XP Environment (Save to Disk, Open an Application and Email Attachment). But the same functionality is not working at Windows 7 Environment (both 32-Bit as well as 64-Bit).
    Below is the code to Exporting Crystal Report to HTML in VB.NET.
    Dim CrDiskFileDestinationOptions As New DiskFileDestinationOptions
    Dim CrFormatTypeOptions          As New HTMLFormatOptions
    Dim vFormat As Integer
    Dim CrExportOptions As New ExportOptions
    Dim vRdReport As New ReportDocument
    Dim sfd As SaveFileDialog
    Dim vFileName As String = Nothing
    vRdReport = vRptSource
    sfd = New SaveFileDialog
    If Not (vRptPath = "") Then
        sfd.InitialDirectory = vRptPath
    End If
    sfd.Filter = "Webpage, Complete(.htm;.htm)|.htm|Web Archive, Single file(.mht)|.mht|Webpage, HTML only(.htm;.html)|.html"
    If sfd.ShowDialog = DialogResult.OK Then
        ' Set the disk file options.
         CrDiskFileDestinationOptions.DiskFileName = sfd.FileName.ToString()
    Else
         Return
    End If
    CrExportOptions = vRdReport.ExportOptions
    CrFormatTypeOptions.HTMLFileName = vFileName
    CrFormatTypeOptions.HTMLEnableSeparatedPages = True
    CrFormatTypeOptions.HTMLEnableSeparatedPages = True
    CrFormatTypeOptions.HTMLHasPageNavigator = True
    CrFormatTypeOptions.UsePageRange = True
    With CrExportOptions
                        .ExportDestinationType = ExportDestinationType.DiskFile
                        .ExportFormatType = ExportFormatType.HTML32
                        .DestinationOptions = CrDiskFileDestinationOptions.DiskFileName
                        .FormatOptions = CrFormatTypeOptions
    End With
    vRdReport.Export()
    Catch ex As Exception
            MsgBox(ex.ToString)
    End Try
    Code working fine at Windows XP, But it is not woking in Windows 7 environment.
    Please can anyone share your valuable thoughts or ideas reg. this.
    Thanks in Advance
    Deivanayaga Perumal D.

    user13509659 wrote:
    Run this code to reproduce the issue.Which issue?
    It looks like inheritance is broken in the component hierarchy for JFrame in Windows 7 JDK 1.6.0_23-b05. The only thing remotely related to inheritance in your code snippet is the WindowListener, which does little. See camickr's advice about built-in exit management.
    EDIT - using the post title as a clue, I realize you may be talking about the component hierarchy, and whether the contentPane's background is visible through the upper layers. Instead of guessing, I'd prefer you describe your "issue" accurately (observed vs expected behavior).
    Edited by: jduprez on Feb 10, 2011 1:01 PM

  • Web Service Client(Console App) not working on Windows Server 2008 R2 Standard Edition

    I am trying to consume an ASMX Web Service in a console app, its working fine in Windows 7,Windows Server 2012 Standard,Windows Server 2008 R2 DataCenter,Windows Server 2008 R2 Enterprise, But its not working in Windows Server 2008 R2 Standard Edition which
    is the deployment server.
    I tried consuming the ASMX web service using Web Reference and Service Reference as well but its not helping. Its throwing up the following error,
    Message:There is an error in XML document (1, 331491).
    Inner Exception : System.Xml.XmlException: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 331491.
    The scenario is that i call the web service and it returns me an XML i am not able to receive the XML on Windows Server 2008 R2 Standard Edition.
    Please provide suggestions on this I need to resolve this ASAP.

    Hi,
    This question is better asked here:
    http://social.msdn.microsoft.com/Forums/en-US/home?forum=asmxandxml
    Experts here are more familiar about it and they can give you more efficient suggestion.
    Thank you.

  • APPLE mouse & keyboard not working with Windows (Bootcamp)

    I installed Leopard and Windows XP on my Mac Pro. The installation went very smoothly. Only problem I have is that my Apple wireless keyboard and mouse do not work on Windows (frozen) although they work fine on Leopard. I tried a Logitech wireless trackball and it works fine on both Windows and Leopard. Any suggestion?

    Thanks. I upgraded from Tiger and downloaded Bootcamp from Leopard Installation disc ( I did not have a beta version ). I then installed Windows XP SP2 ( brand new, just bought for that purpose ). Wonder if Mac wireless keyboard and mouse are compatible with Window. Everything else work beyond my expectation.

  • Flash player does not work in Windows 8 tiles

    Flash player does not work in Windows 8 start metro tile applications. Flash player also does not work in Windows 8 start tile internet explorer 10 1n windows 8. Flash player does work in Windows 8 desktop internet Explorer 10. I tried all of the recommended fixes suggested by adobe Flash Player Issues/windows 8 page. I have reinstalled Windows 8 operating system.  What should I try next?

    This is a known issue with Flash Pro CC - GM build.
    this crash has been fixed in the update that was released recently. Please update to 13.0.1.808 version and it should fix this.
    Please reply if it still persists after the update.
    -Sujai

  • ITunes 12.1.1 does NOT work with Windows - Fix??

    Hi everyone,
    I had issue after issue with the latest iTunes update (12.1.1) not working on my windows 7. It simply would not lunch when clicking on the shortcut to open.
    After a fair bit of searching I found this alternative version which seemed to do the trick and now it works:
    iTunes 12.1.1.4 for Windows (64-bit - for older video cards) - iTunes64Setup.exe(2015-02-18)

    The "for older video cards" installer - which, like most prior "64 bit" versions of iTunes, is actually a 32 bit application with a 64 bit installer - may be a useful fallback if the full 64 bit version does not install or run correctly.  Although 12.1.1.4 is a major improvement over 12.1.0.71, there are clearly still some lurking incompatibilities with some 64 bit Windows systems/components.  It is, however, a little misleading to say that "iTunes 12.1.1 does NOT work with Windows" - in many cases it works fine without switching to the alternative version.  I have the full 64-bit version of 12.1.1.4 running on three systems - two Windows 7 and one Windows 8.1 - no issues with either installation or operation on any of them.

  • ITunes 9 Home Sharing does not work on Windows 7 x64

    iTunes 9 Home Sharing does not work on Windows 7 x64.
    Getting the following error message:
    Home sharing could not be activated because this computer is not authorized for the account "iTunes account." Please authorize this computer and try again.
    This is a bug since my computer is authorized in iTunes and there is only 2 computer authorized for my iTunes account, so I have 3 more left till I should get this message.
    I've just upgraded my iPhone to OS 3.1 using it this morning.
    Please advise.
    Environment: Windows 7 x64, HP TouchSmart tx2-1020us Notebook
    Ivan Farkas
    <edited by host>

    I am using Windows 7 x64.
    I am running iTunes 9.0.2.25
    I am running Mcafee.
    I can see and play music from the iTunes installation on my Windows 7 machine, but I CANNOT access the library to copy songs from this computer to other computers on my network.
    YES, I have enabled "Home Sharing" using my iTunes account. NO, I have not authorized more than 5 computers on this account.
    I believe this to be a Windows 7 related issue, as Home Sharing worked as advertised when I was using Vista (before I upgraded to Windows 7).
    I CAN set up Home Sharing on two other (host) computers in my home network and it works. These computers are XP and a MacBook Pro. I CANNOT access my Windows 7 machine x64 to COPY music from one autorized library to another. Please help!!!
    P.S. - I have attempted to get this to work by turning OFF my McAfee firewall. Windows firewall is disabled.
    Message was edited by: turcott

Maybe you are looking for