MF4700n having IP address issues

I have been using the Image Class MF4700n for 3 months and yesterday it decided to stop communicating with the networked computers. It continues to work as a fax machine, but it won't automatically reassign the IP address, or allow us to manually assign an IP address. The printer has been reset and still doesn't work. Is there a warranty for this? I purchased through Amazon and was delivered July 30th. We didn't install it until mid August and now October 20th the system doesn't work as a printer. I appreciate any insight on fixing this or sending it back for another printer.

I have Windows 7 on 3 of the computers and Vista on the dinosaur, which will be replaced shortly by a new system running Windows 8.
We run the printer through a netgear router because we have limited CAT5 ports. We changed the position on the router to see if the port went bad and it had no change/effect on the networking.
We did have an outage with our internet and brought the system down (including the modem) and back up. This put the internet back on, but the printer still isn't working. The primary issue is none of the computers see the printer. The IP address is in the printer, and I have asked it to reassign the IP address, I have also typed in a manual IP address (different than the auto assigned IP) and none of these things have allowed any of the 3 computers to see the printer. I have searched for the IP address through the computer as well. It is like the printer doesn't exist.

Similar Messages

  • I have just upgraded my 2 apple computers to OX Lion and my macbook pro is having ip address issues. I have manually changed the ip address, renewed lease which works but everytime I switch on it does not connect to wi fi until I edit the ip address.

    I recently upgraded to OX Lion and have an ipod, ipad, iphone and other apple mac computer on the network besides my macbook pro.
    Since the upgrade I am having issues with my ip address. I have edited this number under renew lease, taken it to a manual edit and on any of these occassions found an address which allows the computer to go on wi fi.
    However everytime I use my computer it starts off without wi fi and I have to manually go back to ip address and either adjust to manual or renew lease.
    Any ideas?

    While we all have MacBooks in this forum most of us don’t have Lion. There's a Lion Support Community where everybody has Lion. You should also post this question there to increase your chances of getting an answer.  https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion

  • I'm having a billing issue with my apple id. I got my first iPhone today and I've signe din etc however before i can download any apps etc i need to resolve an old payment apparently. The problem is i cant enter my new card details because no longer in US

    I'm having a billing issue with my apple id. I got my first iPhone today and I've signe din etc however before i can download any apps etc i need to resolve an old payment apparently. The problem is i cant enter my new card details because the issue is registered to when i was in America and i require to pay the funds from an American source. Any ideas how i can resolve this? It wont accept my new card detail as im back in the UK. I think i have posted this in the wrong area but anyone got any ideas?
    I have managed to change the rest of my accoutn being registered to the UK i think except this

    Hi..
    You can email Apple for help but the link is for the iTunes store not the Mac App Store. You've inadvertently poasted in the Using Mac App Store forum but that's ok. Billing issues are the same for the iTunes Store.
    Click here > Apple - Support - iTunes Store - Contact Us
    It wont accept my new card detail as im back in the UK
    Your credit or debit card credentials must be associated with the same country where you reside.
    "Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
    From here >  The Complete Guide to Using the iTunes Store | iLounge Article

  • Business partner address issue

    Hi Experts,
    I am involved in a CRM upgrade project from 4.0 to 5.1.
    There is a typical problem.
    For some business partner types, all the BPs are having double address maintained in the database,i.e., the address of the business partners are maintaned twice, though only one address has been entered for them during BP address entry.
    So whenever we are working with tcodes like opportunity, it is prompting us to select one of the address from the pop-up. Whenever we are entering any partner value in the Partner tab, a pop up comes to select one of the address though both the addresses are same.
    What I saw in ADRC table is there are 2address no.s maintained for the same address.
    No clue why it is happening and how to rectify it.
    Please help, its an urgent issue.
    Regards,
    Sangeeta

    Hi,
       You can write an executable report to determine the duplicate addresses and then delete them selectively from ADRC table using the API
    BAPI_BUPA_ADDRESS_REMOVE
    or using delete statement and then calling
    commit_work
       If you are using mobile sales application and having the same problem, then i would advise you to use Middleware concepts of Bdoc creation to create bupa_main Bdocs with the delta mode set properly for address and then trigger the mobile bridge programmatically to create the relevant sBdocs and replicate to the clients.
      Also, if you would this problem in R/3, then you would need to trigger the bupa_main adapter object upload using request loads.
    Reward if helpful.
    Thanks,
    Sudipta.

  • System Clean Install because of IP address issues

    HI,
    I just did a clean re-install of Snow Leopard as I had been having the self-assigned IP address issues that so many snow leopard users have been having. Before doing this I used time machine to make a backup of my HD on an external HD and synced my iphone 4 with the computer.
    Now I am hoping to get all of my music back, as well as my contacts, but can't seem to access either of those individually on my external HD using time machine or manually.
    Also I am worried about plugging in my iPhone to the computer and syncing with iTunes, as if I do, I may lose my lifetime's collection of music altogether. Clearly I should have backed up this music on an extra external HD in addition to the time machine backup, but didn't think to do that.
    What are my options? Will it erase the music on my iphone if I sync, or will it pull the music off of it and back into my library? What about Mail and Address book etc?
    any help would be appreciated

    Normal iTunes syncing with an iPhone is one-way - computer to iPhone. If you try to sync the iPhone without your old library then you will indeed wipe everything off the iPhone. There are numerous utilities around such as Pod To Mac - VersionTracker or MacUpdate - that can be used to transfer from the iPhone/iPod to the computer as well as ones that can mount the iPhone/iPod as a disk drive so you can transfer data between computer and iPhone/iPod. For example, PhoneDisk.

  • Having some Captivate issues...

    I have having a couple issues that were not fixed with the
    1.01 update.
    1) After I publish a movie, Captivate will sometimes close,
    without saving anything at all. The movie is fully published,
    however the software basically crashes after it has been published.
    (This doesn't happen everytime, but maybe once out of ever 10
    movies)
    2) When the software is started, the loading screen does not
    always display, I sometimes have to minimize all windows, and then
    click on the loading screen in order for Captivate to have its own
    tab on the taskbar. The loading image will appear when I minimize
    all windows, and when I click on the loading image, it will then
    create the Macromedia Captivate tab that appears on the taskbar.
    3) Captivate cannot handle multiple movies open at the same
    time. I noticed that when I publish with more than one Captivate
    movie open, the software crashes. By crash, I mean the program
    closes the entire movie without saving any changes at all.
    I'm running a fully updated XP w/ SP2. I've disabled all
    startup processes that are not needed, as well as tried with Norton
    turned off- it still didn't work.

    quote:
    For the issue listed as #1, have you tried changing the
    output location to a folder very near the root of the C drive? I've
    seen issues reported where the path was longer than Captivate
    likes, and this can cause issues.
    - I tried C:\Demos, and have had it continue to happen. I
    normally do not put the finished product in that location, but I do
    remember it failing twice when it was at C:\Demos
    quote:
    I have several programs that behave the same way such as
    Firefly, Oracle, and a few others in which I launch the app but it
    does not display in the taskbar until the application gets past the
    splash screen.
    - That's different. I said I have to click on the main logo
    in order for the Captivate taskbar icon to appear, I really hope
    that wasn't the intention of the developers.
    quote:
    As for issue listed as #3, I'm assuming you are referring to
    having multiple instances of Captivate running simultaneously? I'm
    assuming this as Captivate is a single project application. You can
    only work on one project at a time. I also know that Captivate does
    seem to be resource hungry. I'm not sure I've ever tried (nor had
    the need) to open more than two different instances simultaneously.
    So how many are you opening? Surely not 100!
    - Your assumption is correct. That's a shame that the
    developers left out a notice that didn't allow you to open multiple
    instances. Hopefully we'll either get a notice when we try it in
    the future, or get support for multiple movies open at the same
    time, in future Captivate releases.
    I've done about 3 before Captivate starts to act funny. It
    has enough trouble with 2. I think I got up to 8 before Captivate
    crashed.
    I'm really looking forward to the new version of Captivate,
    is there an area to address feature requests/suggestions/bug fixes
    for the next release?

  • I have a new iPad wifi tablet and I am having connectivity/reception issues does anyone know if Apple knows about tis problem and if they plan on resolving this issue?  Anyone else have this problem?

    New iPad having wifi reception issues.  Anyone know if Apple is aware of this issue and are they going to do something to address this problem with my $599+ piece of garbage?   Thanks.  Received this tablet on March 16th.

    Uh...there's a thread just three above your post with over 800 posts on this topic.  Read through it and you may see some ideas which may help you.......Since you didn't even look for similar threads, here's a link to the main topic on this........https://discussions.apple.com/thread/3812929?tstart=0

  • I'm also having a music issue.  When my phone is attached to the computer (mac running 10.6.8) it looks like my music is there but its gray and I can't play anything.  I've tried to delete it and it won't let me but it does not show up on my phone.

    I'm also having a music issue.  When my phone is attached to the computer (mac running 10.6.8) it looks like my music is there but its gray and I can't play anything.  I've tried to delete it and it won't let me but it does not show up on my phone.

    By the way, I have tried shutting of the display switching in the power settings.  That was basically the only real answer I found anywhere.  It didn't work.

  • I'm having a huge issue with itunes locating my missing files..and it's too many for me to locate 1 by 1..It says I'm missing over 3,00 songs and They are all in my music folder..What can I do to fix this issue?

    I'm having a huge issue with itunes locating my missing files..and it's too many for me to locate 1 by 1..It says I'm missing over 3,000 songs and They are all in my music folder..What can I do to fix this issue? I've looked at all the tutorials on youtube and none of it works. I recently got a new computer and I Back-Up all my music and itunes playlist and I import it on my new computer with the new itunes and I go to play a few songs, it says I'm missing them I locate a few but it's still like 3,000 missing and again they are all on the computer and in one folder..Please Help !

    I did that and nothing changed half my songs still have examination marks beside them
    I also just tried dragging my folder of music int he playlist and it duplicated all of my songs? My playlist was at 5k now it's at 10k becuz of 3 duplicates of songs. Is there a way to delete multiple duplicate files?

  • Greetings,Currently I am having a big issue to access the  "Shop section(tab)" of the website.

    Greetings!
    I need assistance from you wonderful mac techies out there.
    Currently I am having a big issue to access a website's "SHOP section(tab)" within this website.
    While in the process of paying for my items in my cart, I received a website message saying something
    To the affect that this website is being updated. Your items in your cart will be in your cart.
    Then the website's screen kicked me out the door.
    A few days later I accessed the main page of this website with no problem.
    I can read the information on the main web page pertaining to items I need to purchase, etc., with no problems.
    I click and maneuver from on one tab to another from the main page within this website with no issues.
    When I click on the "SHOP section(tab)" within this website to complete my purchase.
    Part of this website an error occurs on this "SHOP tab".
    "Safari can't connect to the server".
    Safari can't open the page "https://and the name of this website" because Safari can't connect to the server "www.the name of this website".
    I click on the reload from the view of the toolbar and I can't access this website's "Shop section(tab) at all.
    I e-mailed the webmaster of this website a few times, but no response.
    In the past I was able to access the "Shop section(tab") within this website many times to purchase items with no issues.
    Now I am at my wits end as I really need to complete my purchase from this website.
    I cannot purchase these items from other websites. Only this website. Good Grief( :
    I am at my wits end as I really need to complete my purchase with this particular website.
    So, I really need anyone's tech expertise to help me access the "SHOP" tab within this website.
    I can't figure this out (:
    No issues with:
    * My modem and ethernet connections
    * My network provider connection
    * Cables and wires
    * Power strip unit to protect my electronics.
    * Utility bill is up to date.
    I have a Mac Desktop 23 inch screen (Purchased 01-01-2013)
                                                      Lion: OS X
                                                      Version 10.8.2
                                                      Processor: 2.7 GHz Intel Core i5
                                                      Memory: 8 GB 1600 MHz  DDR3
    I use Safari: Version 6.0.2 (8536.26.17)
    I use the Mail app that shows a postage stamp with the picture of an eagle  
                                                      It is the Version 6.2 (1499)
    I really need help access the "Shop section(tab)" of the website to complete my purchase.
    What is the next step to fix my dilemma?
    Thank-you all in advance with your expertise, and patience.
    Very Much Appreciated.
    With Kindest Regards

    You can try basic steps like these in case of issues with web pages:
    Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and only cookies from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • I bougnt my S5 a month ago and I am having two major issues.  The screen is very slow to respond.  When the screen is dark and I press the home button, it doesn't come on.  I have to press the button anywhere from 4-10 times and then it usually flashes on

    I bougnt my S5 a month ago and I am having two major issues.  The screen is very slow to respond.  When the screen is dark and I press the home button, it doesn't come on.  I have to press the button anywhere from 4-10 times and then it usually flashes on and back off.  It is very, very frustrating.  The other issue is that the battery drains very quickly.  I have called Verizon numerous times regarding these issues.  They tell me to do different things that never help.  We eventually did a factory reset and it still has the same issues.  Help!  It is a brand new phone and unfortunately I am in a new two year contract.  Ugh. Is there anyone out there who can help me?

    I have done that several times.  In fact, every time I call Verizon with my phone problems, they have me do the same things repeatedly.  I keep telling them I have already done them but they insist they are SURE it will work this time.  It never does.  After doing the factory reset and it still not working correctly, they act like they are confused, almost like I am lying.  I did what you suggested above on the slim chance it would work this time but it did not.  I bought two S5's that day and the other one works perfectly fine.  I know I got a bad phone.  Verizon just does not listen.  It is a bad phone.  I just want a new phone that works properly.  Is that too much to ask?  I bought a new phone that has been bad from day one.  Why oh why do I have to spend hours of my time on the phone, in the store, on the computer, trying to rectify this?  It shouldn't be this difficult!  Help please!!!

  • I am having some serious issues with firefox, i can't print anything because it is stuck on fax and I can't use any of the drop down menus on any site

    I am having some serious issues with firefox to the point of choosing another search engine. I can't print anything because it is stuck on fax and won't let me change it to my printer when i do try to select my printer it jumps right back to fax. The drop down menus do not work on any of the sites I go to. For example when purchasing clothes and you have to choose a size from a drop down menu I can't do it when I click on the drop down menu it doesn't work at all. I don't have a virus I ran my virus protector and no viruses are present. I don't have any suspicious issues going on with my computer so there has to be something in Firefox that is causing my issues. I tried internet explorer and I don't have any issues there. I hope you can help me because I love Firefox and would really like to continue to use it.

    Lots of issues there, main one getting fcpx going again, try deleting the preferences using the utility deveoped by these guys.
    http://www.digitalrebellion.com
    Try deleting your render files and re-rendering the project.
    Start with these and let us know how you go.
    Tony

  • I have been using Firefox for many years now and really like it, now the version 4 is extremely slow, anyone else having the same issue?

    I upgraded to version 4 last week and find it extremely slow compared to the previous version - like so slow that some pages do not even load. I have downloaded and gone back to version 3.6.17 and everything is back to the normal I have known for years with Firefox and it is really fast again...so now I know that there is nothing wrong with my computer and that the supposedly very very fast version 4 is much much slower than the previous version 3.6...so what gives? I'm not keen on going back to the new improved version 4, though I know it will not be supported soon...anyone else having the same issue?

    Having the exact same problem here.
    -Mac OSX
    -3.6 worked great
    -I tried the 4 beta, got rid of it because it was so slow
    -When it upgraded to 4 is VERY slow and freezes often
    -Appears especially slow on sites with flash (ie http://www.bbc.co.uk/news)

  • My macbook pro is suddenly having major performance issues

    Hi,
    I´ve been having some performance issues with my Macbook Pro (late 2006) and was hoping that someone here might be able to help me figure out what it is.
    It all started about a month ago with the disc utility giving me an error.
    The error said something about the amount of threads being wrong.
    I popped in the install dvd and fixed the problem. I also did a complete reinstall and upgraded from leopard to snow leopard.
    There was nothing wrong with the S.M.A.R.T.-status of the drive.
    At the same time the hardrive error came around my cpu started to choke. The cpu-problem didn´t go away after I repaired the disc and formatted the drive and installed 10.6.
    Now it feels like the cpu is running way below it´s capacity. Even the simplest of tasks make my computer choke.
    My audio applications are working at about half the speed of what they used to handle. Converting a wave file to mp3 takes about twice as long, and converting a video is even worse.
    I haven´t had any problems since I bought it in 2006. It is still running smooth - except for the lack of speed. It´s not really acting weird or being unstable, just slow. Way slower than it is supposed to be (and was before).
    And it happened overnight.
    I also had a kernel panic last week. But after restarting the system it went away and I haven´t seen it since.
    My specs are: C2D 2.16, 3GB RAM, 120GB 5400rpm hdd, OS 10.6.4...
    Would really appreciate help of any/every kind!
    I fear that this might be the end of my work horse

    Well, kind of a good news bad news situation for you.
    Bad news, is that your hard drive is dying. Make sure you back things up while you still can. Disk Utility's SMART status is generally just this side of useless I'm afraid. I've seen plenty of drives that are completely toast, that will show up as "Verified".
    Good news, is that as repairs go, this is close to as cheap as they get. It's up to you if you want to attempt doing it yourself, but be sure to look for some kind of take apart guide first. Look it over, and if you're even a little unsure, take it somewhere. Shortly after this model they started making it a lot easier to do HDD upgrades, not that it does you a lot of good.
    Anyway, even for a system as old as yours, this is a very cost effective repair if everything else is still working fine, and you're satisfied with the system. It's also a good opportunity to upgrade, give yourself a little extra space. No need to go overboard, but maybe a 250GB drive or so. A touch over 2X the space you had before, which can be had on the cheap. Just about any 2.5" SATA drive should work in that system.

  • Since I've installed Mountain Lion, I am having lock up issues with multiple programs. MS Outlook has crashed and I've lost all my folders. HELP?

    Since I've installed Mountain Lion, I am having lock up issues with multiple programs. MS Outlook has crashed and I've lost all my folders. HELP?

    okay I've finally been able to get tor and all the other programs to work according to my plan the only thing that's still making problems is that iptables doesn't work as I want it to, when I start chromium without proxy settings privoxy doesn't seem to forward the information to polipo.. do I need to add another rule to iptables.rules in order for the program to know it has to reroute the information again or how can I get this to work? and is there any way to run rtorrent with proxy support?
    anyway, problem 2 and 3 are still to be solved.
    and does anybody know where i can get a good dansguardian blacklist that was not designed for 6 year old children and for which I don't need to subscribe? I'm still getting these partypoker popups -.-
    //e: with iptables it's the same thing as described in the first post. https works, http doesnt. I get the output "Invalid header received from client." on http sites. still no idea why though.. (and the https-version of torcheck.xenubite says i'm tor unprotected while starting the browser with iptables)
    Last edited by deF291 (2011-04-23 16:16:31)

Maybe you are looking for

  • Tabset in page fragment , the url does not changes when we select tabs...

    Hi Thank you for reading my post. i noticed that when we use a tabSet in a page fragment , selecting tabs does not change the current URL , is it a correct manner ? I think when we select a tab and it opens another page the url should change.

  • Dynamic query, row to column

    Hi. Is any way to select one row as column for any table exists? I mean some script which have table name and condition as input parameters, and prints column_name || column value; I have tried to do it, but have some problems. e.g. have table create

  • HANA Triggers

    I was wondering if it would be possible to have a trigger that whenever a row is inserted or updated in Table A, it automatically creates another row in the history table with that same data as in table A, except with one additional column which is a

  • Need info on UDCDCMD ioctl

    Does anybody know where I can find information on this ioctl? Can't find mention of it other than in patch reports. Thanks

  • I already own LR and PS but my options show "buy now" or 'download trial" neither of which applies to me?

    I'm embarrassed to admit that while I started my monthly membership with adobe CC last year, I haven't utilized it until now.  I currently have LR3 and have PS5 and wanted to update.  I am not sure I fully understand how to use my membership as the d