MF60 - Replenishment storage location  missing !! help

Hello friends,
I am running pull list in t-mf60 , when I execute the data in automatic mode in global setting, the Replenishment storage location is coming blank for all material codes even some material have stock in main store location . Also I have assigned main store location in SPRO.
Kindly help
Regards
sam

Dear Sam,
Generally replenishment Storage location field will be seen with filled values if Warehouse Management is
actived and in the other normal cases we have to fill the repl.storage location manually before staging the
materials.
Regards
Mangalraj.S

Similar Messages

  • Updation of Replenishment storage location in MF60 ( reservation creation )

    Hello,
    In REM, we are using MF60 for two step material staging.
    We have gone for two stage staging process.
    First shop person will create reservation and then the store person will issue the material against the reservation.
    Here when the resrvation is getting created , user
    do not want to give the replenishment storage location on the sap screen.
    User considers this as a pain.
    Is there any way to bring the replenishment storage location
    automatically updated in the reservation?
    Please let me know in both scenarios,
    scenario one --- by using inventory management
    scenario two --- by using warehouse management.
    Waiting for reply from Experts.
    Regrads,
    Ravindra Deokule

    Hello Mahesh,
    Thanks for your reply.
    Your suggestion was valid if we were working with single step stock transfer process.
    But as stated in the question , we are working with two stage process.
    Here the stock determination button itself is not appearing on the SAP screen in MF60.
    So I think your answer is not right Or may be let me know how
    to bring the stock determination button on the SAP screen when you are creating the reservation.
    Waiting for your reply.
    Regards
    Ravindra Deokule

  • Default "Replenishment Storage Location" in Pull list

    Hi Gurus
    I want to assign a Default "Replenishment Storage Location in Pull list", what are the settings required
    pl suggest
    thanks
    K.Prabakaran

    Please see that following is set\
    1. Configuration settings in OSPX
    1.1 set - Plant to SDG
    1.2 Create Stock det rule
    1.3 For above created stock det ruleplantSDG set the following
    1.4 sorting/qty distribution proposal/other setting-Stock detr online\
    1.5 set the storage loc with different stock type and priority
    2. assign SDR to material in plant/storage view 2
    3 see that you have maintained the materioal in all the storage loc where you have entered the storage loc in step 1.5
    4. maintain safficiet stock in storge loc
    5 Now create a production order and release it.
    6. In mf60 see that that material is selected and click on create replanishment
    7. select the item from table down and click on batch/stock determination
    follow the steps and come back if any issue.

  • Storage location missing or incorrect Message no. L3432

    Hi,
    Previously the item we want to zero-in is under warehouse number WH1 under let's say plant 1000-storage location 1010. However this plant 1000 storage location 1010 was later on assigned to a new warehouse number WH2. During the migration period, this item was forgotten to be moved in the system from WH1 to WH2. Hence, we are trying to correct the quantity in WH1 now. However, when we try to post the count using LI11N, it is giving me Storage location missing or incorrect. How do we solve this?
    If you have other suggestion on how to correct the quantity in WH1, please let me know. Thank you.

    Hi Jackie,
    Could you please perform the below steps?
    1) Transaction SE51
          Program SAPML03T, Screen number 0101 -> Element list -> Change
    2) Select Tabstrip 'Special attr.', position the cursor on field LTAP-LGORT
        and mark 'SET' parameter' and 'GET parameter'. Finally generate the screen.
    Check this settings in your system and re-test.
    BR,
    Enrique

  • Storage location missing in Inbound delivery

    Hi ,
    When I am getting the ASN or confirmation for my purchase order.
    automatically Inbound delivery is getting created.
    But here the problem is missing the storage location in inbound delivery.
    I maintained the storage location determination (with situation) setup.
    could you please help me.

    The entry in OMB2 indicates that automatic creation of storage location data in the material master record at the time of the <b>first goods receipt</b> is allowed.
    As well the storage location data is only created automatically if the quantity is posted to the "normal" storage location stock. If you have goods movements to special stock (for example, to sales order stock), the data is not created.
    To my knowledge the PO generally does not have storage locations,while creating inbound delivery (manually or automatically) storage locations are copied from the material master. So, also check what S.loc. your material master has for the materials you are creating inbound deliveries.
    Regards,
    PATHIK

  • MF60 Multiple Storage Location Check

    Hi Friends,
    Could someone please tell me if it is possible for the Pull List (MF60) to look at multiple storage locations (say a staging location and a stock room)? If it possible then what config do I need to do?
    I would really appreciate your help. Thanks
    Regards,
    JP

    Hi Mahesh,
    I have tried that already but I faced the following problems:
    1) If there is a storage location assigned to the Material then when I run MF60 it only checks for the Material in the specified storage location even though I might have defined the stock determination strategy and defined the sequence for two storage locations in it.
    2) if I dont assign any storage location to the material (in the marerial master, BOM or routing) then when I run MF60 it doesn't come up with anything even though I have defined the stock determination strategy and defined the sequence for two storage locations in it. My production order doesn't show an issue storage location for the components but in this case if I do a order confirmation, then it uses the stock determination strategy to issue the component using the sequence defined
    I hope I have explained these problems clearly but please let me know if you need any further information. I really appreciate your help.
    Thanks,
    JP

  • Storage location missing in purchase order

    Hi all, I'm struggling to find why the storage location is not copied from purchase requisition to purchase order using ME21n.
    Further this happens only for one buyer, the same PR's if converted in PO by other buyers, move correctly storage locations to PO.
    Only for one buyer the storage location comes up blank and he has to populate manually the field.
    I've checked his SAP profile and it's perfectly the same of all other buyers. Also he hasn't any particular personal settings in his ME21n.
    Apparently there aren't reason why it should happen but it does.
    Also searching on the web I haven't found any documentation or any other SAPer with the same issue
    Can someone give me some suggestion?
    thanks
    Luca

    There are 3 reasons for this issue...
    1. Authorization
    You have said that, all authorizations are same for this buyer compare with other.
    2. Personal settings in me21n.
    You have also said that there are no issues with the personal settings..
    3. User parameter..
    Check user parameter from su01 tcode. Is it showing same as other users..
    Also check again the personal settings, is there tick the option "Always propose" for storage location in me21n..

  • Automatically creation of storage location for material, in MF60

    Hi all,
    my collegue of PP module uses MF60 transaction.
    When he puts XXXX as Replenishment storage location, the system tells him this error: To stge loc. XXXX does not exist for material M1010000182 in plant 0001.
    In MM i have activate the automatic creation of storage location for plant 0001 and for all movement types.
    Why MF60 does not respect this requirement?
    If I try to do movement type 311 with MIGO, manually, there's no problem to transfer the material from a storage location to , XXXX s.loc.
    Is there something more that I have to do?
    Thanks in advance!
    Best regards
    Alba

    Thanks a lot...
    the note says:
    Summary
    Symptom
    A material without storage location view exists.
    If within a single material document, this material is moved in such a way that no change in stock occurs in total, the system does not create a storage location automatically even if this is set in Customizing.
    Additional key words
    OMC3, XLAUT
    Cause and prerequisites
    All postings to a segment (for example, material, plant, storage location) are only executed if a change in stock occurs. Only in this case, storage locations are created automatically. This way it is made sure that no empty segments are created.
    Solution
    The system behaves correctly.
    Header Data
    Release Status:     
    Released on:     07.07.2000  22:00:00
    BUT why IF i do 311 in MIGO, system creates automatically storage location (also if no change in stock occurs in total).
    AND if doMF60  (that does mouvement 311), system does not create automatically the storage location?
    Best regards
    Alba

  • Replenishmant storage location in MF60(reservation creation)

    Hello,
    In REM, we are using MF60 for two step material staging.
    We have gone for two stage staging process.
    First shop person will create reservation and then the store person will issue the material against the reservation.
    Here when the resrvation is getting created , user
    do not want to give the replenishment storage location on the sap screen.
    User considers this as a pain.
    Is there any way to bring the replenishment storage location
    automatically updated in the reservation?
    Please let me know in both scenarios,
    scenario one --- by using inventory management
    scenario two --- by using warehouse management.
    Waiting for reply from Experts.
    Regrads,
    Ravindra Deokule

    Hello Mahesh,
    Thanks for your reply.
    Your suggestion was valid if we were working with single step stock transfer process.
    But as stated in the question , we are working with two stage process.
    Here the stock determination button itself is not appearing on the SAP screen in MF60.
    So I think your answer is not right Or may be let me know how
    to bring the stock determination button on the SAP screen when you are creating the reservation.
    Waiting for your reply.
    Regards
    Ravindra Deokule

  • To stock transfer  the RM to Production storage Location

    Dear All,
    I want to  stock transfer the RM from Store to production storage location after that I have to pick the material against Production Order from Production Storage Location.
    How I can carry out this scenario.
    I am trying through Pull list.
    please give ur valuable inputs.
    Thanks in advance
    Vijay Mankar.

    Hi Vijay,
      To tranfer the stock from store to Prod storage location , u can do in two ways,
    1.Pull list - By accesing the Pullist with the production order .if there is no enough stock to meet production qty at production storage location , system calculate the missing part and asks replenishment storage location. here u have to give your store as repl.storage location
    2. Enter tranfer posting.( MB1B)  - using this u can tranfer the stock dierctly from the store to prodution storage location. u have to use 311 Mvt type and define Rec storage location is store.
    3. Enter good issue MB1A -  u can pick the raw material with reference to your prodution order using 261 Movement Type.
    please reward if it helps
    regards
    pradeep

  • Replenishment Storage Loaction

    Hi MM Gurus,
    I have a problem in replenishment storage location. I have 2 storage locations under one plant which is required to replenish the stock automatically. I have maintained the proper indicator in MRP 4 view SLoc indicator "2" and re-order point with lot quantity.
    I did not eneter anything in the procurement type field, b'cas I believe it is not required.
    When I run the MRP for location 0001, a reservation is created in the storage location 0001 where the stock is below the ROP. But the stock is not moved to 0001.
    My Question:
    (1). How the system to find the source storage location?
    (2). How reservation will be processed to confirm the stock movements from 0002 to 0001.
    Thanks & Kind Regards,

    Dear
    You can create a stock determination rule in customizing and you can assign that rule to material master & to the respective application in configuration ( for eg..for mvmt type or for pull list....). So that the replinishment location will be automatically determined by the system while picking.
    How to use MF60
    Regards
    JH
    Edited by: Jiaul Haque on Sep 21, 2010 3:09 PM

  • Storage Location Error duing GR of Subcontarct for The Sales Order Stock.

    HI ,
    Is there any settings  to avoid individual entry of Storage Location field for the child components during  the  Goods Receipt from Subcontractor  for the Sales Order Stock.
    As per SAP standard , I have created Separate storage location for Sales order stock components as the Stock provided to vendor  . While receiving the header component , System showing error to enter storage location for all the BOM component s .  My Requirement is , Storage location should come automatically for the child component while receiving the Header Component.
    Yogesh.K.

    Hi Jurgen,
    He's right, the posting is not a bug.
    In case of MTO scenario, if components are managed in the sales order / project stock system withdraw them from storage location.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/4d/2b90b043ad11d189410000e829fbbd/frameset.htm
    The subcontracting orders are account-assigned to a sales order or a WBS element. Thus, the components are not transferred (using a transfer posting) to the "stock of material provided to vendor" but are directly withdrawn from the sales order stock or the project stock at the time of the goods receipt.
    Since the components are not transferred to the "stock of material provided to vendor", we recommend that you use a transfer posting to transfer the provided components to a new storage location (for example, 9999). This enables you to obtain an overview of those stocks that are physically located at the subcontractor. This information is particularly important when you carry out a physical inventory of the sales order stocks and project stocks.
    Cs.
    Edited by: Csaba Szommer on Jan 5, 2010 7:17 PM

  • How to control print-out in GI Slip based on storage location

    Hi Experts,
    Presently my smartform - GI Slip is giving print out for each line item. But the requirement is: no. of print out will depend on no. of storage location, independent of line item. Since GI Slip is a collective slip hence its showing same details for each line item. The print out are first taken from MB1A and then MB90 is for reprocessing.
    How can I control the no. of printouts based on storage location
    Please help me in this issue...
    Thanks in Advance...
    Pinki.

    You have to modify your driver program,
    Ex: Loop at < internal table>
    AT NEW <storage location>
    <New-page>
    End at.
    End loop.
    The above syntax will help you to close the issue.
    Rgds,
    SR

  • Mass extension of article to another storage location

    Hi All,
    How can we extend article to another storage location in Retail...like MMSC tcode in Standard R/3.
    for ex: Suppose we have 100k article already exist with storage location "0001", Now we have to extend it to Storage location "0002".
    helpful answer will be rewarded.
    thanks & Regards
    saurabh dubey

    Dear Saurab,
    Manish is exactly right here, we need to create a simple BDC with artile, site, Sales org, Distribution channel and storage location (new one for extension) to get it done as MM46 (MARC-LGFSB) will change/update the values from existing status rather than extending the new values.
    Also we Can't use MMSC or MMSC_MASS with Retail Articles.
    I hope your query is being answered.
    Regards,
    Kunwar

  • Help required -for MRP Run at storage location level

    Hi ,
    we need to have separate MRP fro two storage locations with direct procurement from Storage locations. Right now we have MRP run at Plant level for all the storage locations. we donot want the materials in these two storage locations to be planned at Plant level only with Separate storage locations. Plant level MRP will run for the other storage locations .
    I have created separate MRP areas for the storage locations & activated MRP for MRP Areas client level. material masters for the two storage locations have been asigned the MRP areas & maintained the MRP area data in material master .
    When we run the MD01, the Planned orders are getting created at both MRP areas plus at the Plant level.we donot want the planned orders creation at Plant MRP area level-only at the storage location level for those two storage locations MRP areas.
    Can anybody guide me -how to achieve that ? Did we miss any configuration?
      I tried to maintain scope of planning & getting error for parallel processing .
    Do i need to maintain parallel procesing with servers ?
      Pls need your input on this. Any help will be highly appreciated .
       Thank you in advance.
        Regards,
        Krish.

    Hi,
         Go to IMG settings 'Materials Management + Consumption-Based Planning + Planning + Define Storage Location MRP per Plant' Enter your Plant, It will show list of storage location in that Plant, then select 2 in 'MRP Indicator' field for storage location for which u want to plan seperately.
    Hope It will clear Your Problem
    Regards
    Sunil Kumar

Maybe you are looking for