MFA Server unable to use RADIUS

I have MFA server installed and setup per this guide (http://www.isaserver.org/articles-tutorials/configuration-security/configure-windows-azure-multi-factor-authentication-forefront-threat-management-gateway-tmg-2010.html).
I have imported the test user, and when I use the test feature in MFA Server, I get the call or text, and everything works.
I have a test web listener setup and pointed to the radius server for auth. I have confirmed the server settings and shared secret are correct multiple times (I even changed the shared secret to a simple 4 digit secret to rule that out as the issue). Every
time I try and use the web listener to auth, the MFA radius logs show the following.
*edit* I also tried a 3rd party radius auth testing tool (radlogin) against the MFA server, and I get the exact same error. So this issue is specific to the MFA server, not Forefront TMG.
2015-04-02T20:17:39.602409Z|0|1868|1896|pfrad|Code 1 - ACCESS_REQUEST.
2015-04-02T20:17:39.602409Z|e|1868|1896|rpc|The remote procedure call failed. (0x000006BE = 1726)
2015-04-02T20:17:39.602409Z|e|1868|1896|pfrad|Couldn't find a secret for packet sourced from X.X.X.X, are they in the config?
2015-04-02T20:17:39.602409Z|e|1868|1896|pfrad|processIncomingPacket failed.
2015-04-02T20:18:44.610081Z|0|1868|1896|prfad|Event 3.
2015-04-02T20:18:44.610081Z|0|1868|1896|prfad|Sock 0x0000000000000114
2015-04-02T20:18:44.610081Z|0|1868|1896|pfrad|Code 1 - ACCESS_REQUEST.
2015-04-02T20:18:44.610081Z|e|1868|1896|rpc|The remote procedure call failed. (0x000006BE = 1726)
2015-04-02T20:18:44.610081Z|e|1868|1896|pfrad|Couldn't find a secret for packet sourced from X.X.X.X, are they in the config?
2015-04-02T20:18:44.610081Z|e|1868|1896|pfrad|processIncomingPacket failed.
The masked IP is the internal IP of the TMG server. So I'm not sure where the RPC call is failing (I shut off windows firewall on MFA server to test), and why it's saying it couldn't find a secret from the source. Any thoughts? I really need to get this
POC working today for a client.
Thanks.

Thanks for the post. I checked both links and don't see anything that applies to my issue. I have used wireshark to capture the packets, and don't see anything wrong (but I have limited radius knowledge). So the packet makes it from TMG to MFA Server, but
MFA fails to process with the errors listed in the OP.
I even tried to remove the shared secret on forefront (to force it not to match), and tried to log on. I assumed this would cause a failure with a different error, but I got the exact same error as before. So I can't figure out what RPC call is failing,
or what secret packet is missing.
I also ruled out TMG as the issue. I went ahead and downloaded Radlogin to test using the MFA Radius Server auth. I get the exact same error from that client as I do when using TMG. So the issue is the MFA/Radius server.

Similar Messages

Radius server web authentication using ISE

Hi,
Can anyone point me in the direction of a guide to implement radius server web authentication using ISE?
I need this to be layer 3 Web Auth with all authentication requests coming from the wireless anchor controller, therefore don't think I can implement central web auth on ISE as detailed in the user guide as its layer 2 and auth requests come from the foreign controller.
The following link explains "Radius Server Web Authentication" using ACS. I need to find something similar for ISE - http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/69340-web-auth-config.html
Thanks,

Hi,
Please check these:
Central Web Authentication on the WLC and ISE Configuration Example
http://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/115732-central-web-auth-00.html
Regards
Dont forget to rate helpful posts

HT5429 unable to use MAPs in india as well as Middle east - When I try it gives pop up message - cannot provide directions. The map server is not available

unable to use MAPs in india as well as Middle east - When I try it gives pop up message - cannot provide directions. The map server is not available

Here:
http://support.apple.com/kb/DL907?viewlocale=en_US&locale=en_US

I just bought a ipod touch. I am unable to use it because itunes tells me I have no internet connection (unknown error 306). I have tried all the suggestions I can find, including checking the firewall, the no proxy server is checked, resetting cache on i

I just bought a ipod touch. I am unable to use it because itunes tells me I have no internet connection (unknown error 306). I have tried all the suggestions I can find, including checking the firewall, the no proxy server is checked, resetting cache on itunes, I even scanned the computer with Registry Easy but nothing worked. I use Mozilla Firefox and have a PC with Windows 7. Obviously, buying a ipod and being unable to use it for 3 days (and counting) because I am unable to register it, is pretty frustrating. Can anyone help?

Did you try all of this:
iTunes Store loads partially or returns "Error 306" or "Error 10054"
Proxies, parental control settings and software, security or filtering software, or a bad iTunes Store cache can cause this.
To address proxies, Remove Internet Options proxy settings and connect to the Internet without a proxy.
To reset iTunes Store cache:
In iTunes, choose iTunes > Preferences (Mac) or Edit > Preferences (PC).
Click the Advanced tab.
Click the "Reset cache" button.
Click OK and see if the issue is resolved.
Adjust Parental Controls in iTunes:
Open iTunes.
Access iTunes preferences:
On a Mac: From the iTunes menu, choose Preferences.
On a Windows PC: From the Edit menu, choose Preferences.
Click the Parental Controls tab.
Remove restrictions on Parental Controls.
For more information on parental controls or content filtering software, see iTunes 10.5 for Windows: May see performance issues and blank iTunes Store.
For more information on other security software, see iTunes: Troubleshooting security software issues.

For 2 weeks, I have been unable to use sync & it says that server maintenance is underway & will resume automatically; need to transfer history to a new laptop

For about 2 weeks, I have been unable to use sync. I keep getting a message that says server maintenance is underway & will resume automatically. How long will this maintenance last? I urgently need to transfer my history to a new laptop and return the one I am currently. My deadline for this is tomorrow as I have run out of time to complete this process

I have reset sync and the messages have stopped coming (I hope I have not messed things up). However, I still don't think sync is working (how do I confirm?).
I don't recall all of the exact words of the error message but it was similar to this: sync operation failed server maintenance is underway and will resume automatically. To check server status (click on something). Each time I clicked on the button provided, I was directed to a mozilla page which informed me that most people are able to use firefox sync and that additional capacity was on the way.
To confirm if rectification of the error had occurred, I tried getting sync on my other laptop to update and I got a similar error.
Yes this has been going on everyday for 2 weeks. I have been given a new laptop where I work and was given some time to transfer all my files. The deadline expires today and am to return the old one tomorrow.
Is there a way I can permanently reset sync to just take in my most recent history and passwords?
Thanks for responding

HT4623 I am unable to use my iPhone 3GS as an ipod, its stuck on activating your iPhone, sometimes i get an error server is busy or there's no sim card installed, and I am using an activated AT&T sim card, does anyone have any suggestions?

I am unable to use my Iphone 3GS as an Ipod, my Iphone is stuck on activating your iphone, I am using an activated AT&T sim card. Does anyone have any ideas on how I cn bypass the activation screen to use my iphone as an Ipod.

you can't bypass activation. Your phone needs to be activated for any of the functions to work.
This problem happens often to phones previously jailbroken. Is this the case?

Unable to use relay server using https configuration

Hi All,
I am using Sybase Unwired Platform 2.2 SP 04 with iOS 7.1.
I am implementing relay server with https configuration. I have already implemented relay server with http using port 80 which is working fine. But when I am changing the outbound enabler property from http to https in Server Configuration, outbound enabler is giving error
"Could not connect to Relay Server, errCode: 57, sysCode: 11001" in the RSOE log.
Instead of public IP, I am using hostname.com URL for accessing relay server.
Also in browser the availability of the url: /ias_relay_server/server/rs_server.dll is showing none.
Kindly advice.
Regards
Debidutta

Hi Wim,
The above log that I posted recently is the messaging RSOE log generated from the sybase control center.
Now below is the log content from the relay server log at C:\inetpub\logs\LogFiles\W3SVC1
#Software: Microsoft Internet Information Services 7.5
#Version: 1.0
#Date: 2014-04-08 13:34:14
#Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-
Agent) sc-status sc-substatus sc-win32-status time-taken
2014-04-08 13:34:14 172.22.219.193 POST /ias_relay_server/server/rs_server.dll - 443 - xxx.xxx.xx.xxx IAS_OE_DnChannel 200 0 64 8050579
#Software: Microsoft Internet Information Services 7.5
#Version: 1.0
#Date: 2014-04-08 13:34:20
#Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) sc-status sc-substatus sc-win32-status time-taken
2014-04-08 13:34:20 172.22.219.193 POST /ias_relay_server/server/rs_server.dll - 443 - 112.xxx.xx.xxx IAS_OE_DnChannel 200 0 0 15
2014-04-08 13:34:20 172.22.219.193 POST /ias_relay_server/server/rs_server.dll - 443 - 112.xxx.xx.xxx IAS_OE_DnChannel 200 0 0 46
2014-04-08 13:34:21 172.22.219.193 POST /ias_relay_server/server/rs_server.dll - 443 - 112.xxx.xx.xxx IAS_OE_DnChannel 200 0 0 31
2014-04-08 13:34:21 172.22.219.193 POST /ias_relay_server/server/rs_server.dll - 443 - 112.xxx.xx.xxx IAS_OE_DnChannel 200 0 0 31
2014-04-08 13:34:22 172.22.219.193 POST /ias_relay_server/server/rs_server.dll - 443 - 112.xxx.xx.xxx IAS_OE_DnChannel 200 0 0 62
2014-04-08 13:34:22 172.22.219.193 POST /ias_relay_server/server/rs_server.dll - 443 - 112.xxx.xx.xxx IAS_OE_DnChannel 200 0 0 1781
Below is the log contents found at C:\Windows\System32\LogFiles\HTTPERR-folder
2014-04-08 13:34:15 112.xxx.xx.xxx 60782 172.22.219.193 443 HTTP/1.1 POST /ias_relay_server/server/rs_server.dll 400 1 BadRequest RelayServer
2014-04-08 13:34:15 112.xxx.xx.xxx 60810 172.22.219.193 443 HTTP/1.1 POST /ias_relay_server/server/rs_server.dll 400 1 Connection_Abandoned_By_ReqQueue RelayServer
2014-04-08 13:34:15 112.xxx.xx.xxx 60782 172.22.219.193 443 HTTP/1.1 POST /ias_relay_server/server/rs_server.dll 400 1 Connection_Abandoned_By_ReqQueue RelayServer
As you can see, we are getting Bad Request in the last log contents.
I request you to provide your valuable suggestions on this.
Regards
Debidutta

Unable to use Content server

Hi experts,
I have the following scenario.
Document Area          Storage Repository      Storage Category
CFF                               ZCFF_01                      ZCFFMAIN
DMS                              ZDMS_01                     ZDMSMAIN
Now, when i am checking the files from cFolders to content server it is using the cfolders storage category and happening properly. But when i want to check in the files from DMS using KPro ( indicator checked in DC10 againt the document Type), It is not happening. it is giving me an error message as " An error occured while creating the original attribute for DOC". When i have gone inside the error message, In the application log for object "SDOK" it is showing " An error occured while calling the function module SCMS_DOC_CREATE" and in the details it is using the storage category ZCFFMAIN ( it is the storage category for cFolders). Actually it should use the storage category ZDMSMAIN ( storage category for DMS).
Can you tell me whether i have missed out anything or any customisation wrongly done ?
Is this the only thing that has to be defined or do we have to do some thing for the data carriers as well? Please elaborate your answer.
Christoph Your expert help is very much needed.
Thanks and Regards
Bhaskar

Hi Bhaskar,
as also mentiond in your support ticket I would kindly ask you to see the attached note 1173675 and check the mentioned entries in table SDOKPROP. Please made sure that all mentioned 22 DMS related entries are maintained and that there is no typing error for these entries.
Please note that for using a storage category in document management the document area 'DMS' has to be used. So please change this setting in transaction OAC0 and OACT from 'CFF' to 'DMS'.
Additionally I would kindly ask you to check if you have maybe maintained the storage category for workstation application DOC in a profile in the customizing under
Cross-Application Components
- Document Management System
- General Data
    - Define profile
Because this could explain why an other storage category is choosen by the system.
Best regards,
Christoph

Lobby User using RADIUS Server in the NCS

Hello,
I need to know if i can use the RADIUS to classify users such as looby and specify in these users the SSID for the guest user and the time for connection like the local database in the NCS.
Actually i'm using the local database for lobby and i'd like to migrate to RADIUS database all these information.
Thanks.

Hello,
Yes, you could use RADIUS to authenticate lobby ambassador users. But the information like default WLAN & time period can't be passed as attributes using attributes.
As a work-around, you could create a local lobby admin account with the same username, define the lobby admin defaults locally. The user will be authenticated using RADIUS but the defaults would be picked up based on the definitions set locally in NCS.
Ram.

Mobile Phone App and Azure MFA Server

I currently have directory sync enabled between my on-premise AD environment and Azure Active Directory, and also enabled multi-factor authentication on my profile. I installed PhoneFactor on my mobile device and am able to use it to verify my identity when
logging into my O365 OWA account.
I recently installed and configured the Multi-Factor Authentication Server to enable RADIUS requests for VPN connections, and have successfully tested MFA using the phone call method (when I connect via VPN client, I provide credentials, and receive a call
to verify my identity, press # and connection is accepted).
What am having trouble doing is using the mobile app as a method for verification. When I try to connect, I immediately receive 'Login Failed,' and there are no indications in PhoneFactor for an authentication request.
In the MFA Server logs, I see two entries:
No device configured for user '[email protected]'
PfAuth failed for user '[email protected]'. Call status: SKIPPED_USER_INCOMPLETE - "User lacks information required for phone auth".
I have read guidelines on creating a user portal within my network for self-registration, but I was hoping I could just use the Azure-provided portal.
Anyone have any ideas why this may be happening?

At present, the MFA Server user enrollment is completely separate from Azure AD. If you want to use the mobile app with the MFA Server, you need to install the User Portal so that users can generate activation codes and set their MFA method to mobile app.
Also, for users to activate their mobile apps, you have to install the Mobile App Web Service, which communicates with the MFA Server via the Web Service SDK to validate the activation code generated in the User Portal. Here are links for installing the User
Portal and Mobile App Web Service.
https://msdn.microsoft.com/en-us/library/azure/dn394290.aspx
https://msdn.microsoft.com/en-us/library/azure/dn394277.aspx?f=255&MSPPError=-2147217396

Unable to use ASDM on 5510 and 5520 ASA

Hello,
I have been working with ASA's for about 8 months now. I have a 5520 that is brand new out of the box and a 5510 that I blew up last week (read as format disk, start from scratch).
I have generated RSA keys, loaded license keys, loaded IOS's and configs in the last few days. Luckily these boxes are table top at the moment and nothingto do with production. However, I have tried to load production configurations on to these boxes, and have determined that not all the lines of the configs will load.
To be specific at the moment, I am unable to load "asdm location 192.168.50.0 255.255.255.0 inside" on either box. I am also unable to use my broswer and HTTPS://192.168.50.1 to access the ASA, even though I have HTTP serve enabled and HTTP 192.168.50.0 listed in the config.
Because I blew up one of the boxes and started from scratch and the other box is brand new, is/are there any other special things that need to be done to these boxes? Like I could put in some of the "crypto" config lines in the boxes until I did the license keys, once they were lin, I could configure the crypto lines.
I am open to any suggestions as this point as I can't current get the VPN's to come up (different issue here) nor see what's going on with the VPN's without ASDM.
Thank you!
Tracey

Hi,
please configure the ASDM-permitted subnets as following:
http
and make sure that you have overlapping ciphers between the client and the ASA:
show run ssl
ssl encryption
if it persists, get the SSL captures at the ASA as .pcap
hope this helps
Mashal Alshboul

[SOLVED] Gnome 3.8: Unable to use Nokia N9 as a Bluetooth modem

Hi,
I'm unable to use my Nokia Any ideas on how to fix this?
Here are some log files:
Bluetooth startup from everything.log:
/> bluetoothd[382]: Bluetooth daemon 4.101
bluetoothd[382]: Starting SDP server
bluetoothd[382]: DIS cannot start: GATT is disabled
bluetoothd[382]: Failed to init deviceinfo plugin
bluetoothd[382]: Failed to init gatt_example plugin
bluetoothd[382]: Bluetooth Management interface initialized
bluetoothd[382]: bluetoothd[382]: Bluetooth Management interface initialized
bluetoothd[382]: bluetoothd[382]: Unknown command complete for opcode 1J
bluetoothd[382]: Unknown command complete for opcode 19
bluetoothd[382]: bluetoothd[382]: Adapter /org/bluez/382/hci0 has been enabled
bluetoothd[382]: Adapter /org/bluez/382/hci0 has been enabled
entries from everything.log:
/etc/gdm/Xsession[612]: Ikkunointiohjelman varoitus:Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x2800003 (Uuden Blue)
/etc/gdm/Xsession[612]: Ikkunointiohjelman varoitus:meta_window_activate called by a pager with a 0 timestamp; the pager needs to be fixed.
bluetoothd[382]: bluetoothd[382]: Discovery session 0x7f5d47491d10 with :1.58 activated
bluetoothd[382]: Discovery session 0x7f5d47491d10 with :1.58 activated
bluetoothd[382]: bluetoothd[382]: Stopping discovery
bluetoothd[382]: Stopping discovery
kernel: [ 1179.820342] usb 2-1: reset high-speed USB device number 2 using ehci-pci
dbus-daemon[396]: dbus[396]: [system] Rejected send message, 3 matched rules; type="method_return", sender=":1.58" (uid=1000 pid=1082 comm="bluetooth-wizard ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.4" (uid=0 pid=382 comm="/usr/lib/bluetooth/bluetoothd -n ")
bluetoothd[382]: bluetoothd[382]: input-headset driver probe failed for device 40:98:4E:65:A1:00
bluetoothd[382]: input-headset driver probe failed for device 40:98:4E:65:A1:00
pulseaudio[678]: [pulseaudio] bluetooth-util.c: org.bluez.AudioSource.GetProperties() failed: org.freedesktop.DBus.Error.UnknownMethod: Method "GetProperties" with signature "" on interface "org.bluez.AudioSource" doesn't exist
pulseaudio[678]: [pulseaudio] bluetooth-util.c: org.bluez.HandsfreeGateway.GetProperties() failed: org.freedesktop.DBus.Error.UnknownMethod: Method "GetProperties" with signature "" on interface "org.bluez.HandsfreeGateway" doesn't exist
pulseaudio[678]: [pulseaudio] bluetooth-util.c: org.bluez.HandsfreeGateway.GetProperties() failed: org.freedesktop.DBus.Error.UnknownMethod: Method "GetProperties" with signature "" on interface "org.bluez.HandsfreeGateway" doesn't exist
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 SyncMLClient
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 DialupNetworking
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 OBEXObjectPush
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 OBEXFileTransfer
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 AudioSource
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 A/V_RemoteControlTarget
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 A/V_RemoteControl
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 Headset_-_AG
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 HandsfreeAudioGateway
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 Phonebook_Access_-_PSE
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 SyncMLClient
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 DialupNetworking
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 OBEXObjectPush
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 OBEXFileTransfer
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 AudioSource
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 A/V_RemoteControlTarget
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 A/V_RemoteControl
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 Headset_-_AG
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 HandsfreeAudioGateway
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 Phonebook_Access_-_PSE
/etc/gdm/Xsession[612]: ** Message: Default Bluetooth adapter is powered
/etc/gdm/Xsession[612]: ** Message: dun_start: starting DUN device discovery...
/etc/gdm/Xsession[612]: ** Message: Tutkitaan puhelimen asetuksia…
/etc/gdm/Xsession[612]: ** Message: dun_start: calling Connect...
/etc/gdm/Xsession[612]: ** Message: dun_start: waiting for Connect success...
/etc/gdm/Xsession[612]: ** Message: dun_connect_cb: processing Connect reply
/etc/gdm/Xsession[612]: ** Message: dun_connect_cb: new rfcomm interface '/dev/rfcomm0'
/etc/gdm/Xsession[612]: ** Message: dun_connect_cb: finished
upowerd[506]: (upowerd:506): UPower-Linux-WARNING **: unhandled action 'move' on /sys/devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.0/bluetooth/hci0/hci0:21/rfcomm0
kernel: [ 1212.925984] Bluetooth: TIOCGSERIAL is not supported
kernel: [ 1214.790844] Bluetooth: TIOCGSERIAL is not supported
kernel: [ 1214.791357] Bluetooth: TIOCGSERIAL is not supported
ModemManager[457]: <info> Creating modem with plugin 'Nokia' and '1' ports
kernel: [ 1215.816882] Bluetooth: TIOCGSERIAL is not supported
ModemManager[457]: <info> Modem for device at '/sys/devices/pci0000:00/0000:00:13.1/usb6/6-3' successfully created
kernel: [ 1215.820679] Bluetooth: TIOCGSERIAL is not supported
ModemManager[457]: <info> Modem: state changed (unknown -> disabled)
kernel: [ 1216.873341] Bluetooth: TIOCGSERIAL is not supported
/etc/gdm/Xsession[612]: ** Message: modem_object_added: (/org/freedesktop/ModemManager1/Modem/0) modem found
/etc/gdm/Xsession[612]: ** Message: start_wizard: (/org/freedesktop/ModemManager1/Modem/0) starting the mobile wizard
NetworkManager[387]: <info> ignoring modem 'rfcomm0' (no associated Bluetooth device)
/etc/gdm/Xsession[612]: ** Message: wizard_done_cb: mobile wizard done
/etc/gdm/Xsession[612]: ** Message: wizard_done_cb: adding new setting
/etc/gdm/Xsession[612]: ** Message: wizard_done_cb: waiting for add connection result...
NetworkManager[387]: <info> BT device Nokia N9 (40:98:4E:65:A1:00) added (DUN)
NetworkManager[387]: <info> (40:98:4E:65:A1:00): new Bluetooth device (driver: 'bluez' ifindex: 0)
NetworkManager[387]: <info> (40:98:4E:65:A1:00): exported as /org/freedesktop/NetworkManager/Devices/1
NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
NetworkManager[387]: <info> (40:98:4E:65:A1:00): deactivating device (reason 'managed') [2]
NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: unavailable -> disconnected (reason 'none') [20 30 0]
/etc/gdm/Xsession[612]: ** Message: Puhelimesi on nyt valmis käyttöön.
upowerd[506]: (upowerd:506): UPower-Linux-WARNING **: unhandled action 'move' on /sys/devices/virtual/tty/rfcomm0
dbus-daemon[396]: dbus[396]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.4" (uid=0 pid=382 comm="/usr/lib/bluetooth/bluetoothd -n ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.59" (uid=1000 pid=1082 comm="bluetooth-wizard ")
NetworkManager[387]: <info> (eth0): device state change: activated -> disconnected (reason 'user-requested') [100 30 39]
NetworkManager[387]: <info> (eth0): deactivating device (reason 'user-requested') [39]
avahi-daemon[392]: Withdrawing address record for 192.168.0.222 on eth0.
avahi-daemon[392]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.0.222.
avahi-daemon[392]: Interface eth0.IPv4 no longer relevant for mDNS.
dbus-daemon[396]: dbus[396]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
dbus[396]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
systemd[1]: Starting Network Manager Script Dispatcher Service...
dbus-daemon[396]: dbus[396]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
dbus[396]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
systemd[1]: Started Network Manager Script Dispatcher Service.
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) starting connection 'Dna connection'
NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: disconnected -> prepare (reason 'none') [30 40 0]
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 1 of 5 (Device Prepare) scheduled...
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 1 of 5 (Device Prepare) started...
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 2 of 5 (Device Configure) scheduled...
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 1 of 5 (Device Prepare) complete.
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 2 of 5 (Device Configure) starting...
NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: prepare -> config (reason 'none') [40 50 0]
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 2 of 5 (Device Configure) complete.
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00 40:98:4E:65:A1:00/bluetooth) Stage 2 of 5 (Device Configure) successful. Will connect via DUN.
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00/bluetooth) Stage 2 of 5 (Device Configure) waiting for modem to appear.
upowerd[506]: (upowerd:506): UPower-Linux-WARNING **: unhandled action 'move' on /sys/devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.0/bluetooth/hci0/hci0:21/rfcomm0
NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: config -> failed (reason 'modem-not-found') [50 120 43]
NetworkManager[387]: <warn> Activation (40:98:4E:65:A1:00) failed for connection 'Dna connection'
NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: failed -> disconnected (reason 'none') [120 30 0]
NetworkManager[387]: <info> (40:98:4E:65:A1:00): deactivating device (reason 'none') [0]
upowerd[506]: (upowerd:506): UPower-Linux-WARNING **: unhandled action 'move' on /sys/devices/virtual/tty/rfcomm0
dbus-daemon[396]: dbus[396]: [system] Rejected send message, 7 matched rules; type="method_return", sender=":1.4" (uid=0 pid=382 comm="/usr/lib/bluetooth/bluetoothd -n ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.8" (uid=0 pid=387 comm="/usr/bin/NetworkManager --no-daemon ")
/> systemd[1]: Mounting Arbitrary Executable File Formats File System...
systemd-sysctl[132]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started udev Coldplug all Devices.
systemd-modules-load[138]: Inserted module 'fuse'
systemd[1]: Started Create static device nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Started udev Kernel Device Manager.
systemd[1]: Mounted Arbitrary Executable File Formats File System.
systemd[1]: Mounted Debug File System.
0.000000] Initializing cgroup subsys cpuset
0.000000] Initializing cgroup subsys cpu
0.000000] Linux version 3.9.5-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.1 (GCC) ) #1 SMP PREEMPT Sat Jun 8 09:22:45 CEST 2013
0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=90b0c2df-9b19-4c19-91ce-5479b086da4d ro quiet
0.000000] e820: BIOS-provided physical RAM map:
0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfdeffff] usable
0.000000] BIOS-e820: [mem 0x00000000cfdf0000-0x00000000cfdf2fff] ACPI NVS
syslog-ng[390]: syslog-ng starting up; version='3.4.1'
systemd[1]: Mounted Huge Pages File System.
0.000000] BIOS-e820: [mem 0x00000000cfdf3000-0x00000000cfdfffff] ACPI data
0.000000] BIOS-e820: [mem 0x00000000cfe00000-0x00000000cfefffff] reserved
0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000032fffffff] usable
0.000000] NX (Execute Disable) protection: active
0.000000] SMBIOS 2.4 present.
0.000000] DMI: Gigabyte Technology Co., Ltd. GA-MA790XT-UD4P/GA-MA790XT-UD4P, BIOS F8g 07/12/2010
0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
0.000000] No AGP bridge found
0.000000] e820: last_pfn = 0x330000 max_arch_pfn = 0x400000000
0.000000] MTRR default type: uncachable
0.000000] MTRR fixed ranges enabled:
0.000000] 00000-9FFFF write-back
0.000000] A0000-BFFFF uncachable
0.000000] C0000-C7FFF write-protect
0.000000] C8000-FFFFF uncachable
0.000000] MTRR variable ranges enabled:
0.000000] 0 base 000000000000 mask FFFF80000000 write-back
0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
0.000000] 3 base 0000CFE00000 mask FFFFFFE00000 uncachable
0.000000] 4 base 000100000000 mask FFFF00000000 write-back
0.000000] 5 base 000200000000 mask FFFF00000000 write-back
0.000000] 6 base 000300000000 mask FFFFE0000000 write-back
0.000000] 7 base 000320000000 mask FFFFF0000000 write-back
0.000000] TOM2: 0000000330000000 aka 13056M
0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
0.000000] e820: update [mem 0xcfe00000-0xffffffff] usable ==> reserved
0.000000] e820: last_pfn = 0xcfdf0 max_arch_pfn = 0x400000000
0.000000] found SMP MP-table at [mem 0x000f5440-0x000f544f] mapped at [ffff8800000f5440]
0.000000] Scanning 1 areas for low memory corruption
0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
0.000000] Using GB pages for direct mapping
0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
0.000000] [mem 0x00000000-0x000fffff] page 4k
0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE
0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
0.000000] init_memory_mapping: [mem 0x32fe00000-0x32fffffff]
0.000000] [mem 0x32fe00000-0x32fffffff] page 2M
0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
0.000000] init_memory_mapping: [mem 0x32c000000-0x32fdfffff]
0.000000] [mem 0x32c000000-0x32fdfffff] page 2M
0.000000] init_memory_mapping: [mem 0x300000000-0x32bffffff]
0.000000] [mem 0x300000000-0x32bffffff] page 2M
0.000000] init_memory_mapping: [mem 0x00100000-0xcfdeffff]
0.000000] [mem 0x00100000-0x001fffff] page 4k
0.000000] [mem 0x00200000-0x3fffffff] page 2M
0.000000] [mem 0x40000000-0xbfffffff] page 1G
0.000000] [mem 0xc0000000-0xcfbfffff] page 2M
0.000000] [mem 0xcfc00000-0xcfdeffff] page 4k
0.000000] init_memory_mapping: [mem 0x100000000-0x2ffffffff]
0.000000] [mem 0x100000000-0x2ffffffff] page 1G
0.000000] RAMDISK: [mem 0x378a4000-0x37c49fff]
0.000000] ACPI: RSDP 00000000000f6e70 00014 (v00 GBT )
0.000000] ACPI: RSDT 00000000cfdf3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
0.000000] ACPI: FACP 00000000cfdf3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
0.000000] ACPI: DSDT 00000000cfdf30c0 0725F (v01 GBT GBTUACPI 00001000 MSFT 03000000)
0.000000] ACPI: FACS 00000000cfdf0000 00040
0.000000] ACPI: SSDT 00000000cfdfa400 008F5 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
0.000000] ACPI: HPET 00000000cfdfad00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
0.000000] ACPI: MCFG 00000000cfdfad40 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
0.000000] ACPI: APIC 00000000cfdfa340 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
0.000000] ACPI: Local APIC address 0xfee00000
0.000000] Scanning NUMA topology in Northbridge 24
0.000000] No NUMA configuration found
0.000000] Faking a node at [mem 0x0000000000000000-0x000000032fffffff]
0.000000] Initmem setup node 0 [mem 0x00000000-0x32fffffff]
0.000000] NODE_DATA [mem 0x32fff9000-0x32fffdfff]
0.000000] [ffffea0000000000-ffffea000cbfffff] PMD -> [ffff880323600000-ffff88032f5fffff] on node 0
0.000000] Zone ranges:
0.000000] DMA [mem 0x00001000-0x00ffffff]
0.000000] DMA32 [mem 0x01000000-0xffffffff]
0.000000] Normal [mem 0x100000000-0x32fffffff]
0.000000] Movable zone start for each node
0.000000] Early memory node ranges
0.000000] node 0: [mem 0x00001000-0x0009efff]
0.000000] node 0: [mem 0x00100000-0xcfdeffff]
0.000000] node 0: [mem 0x100000000-0x32fffffff]
0.000000] On node 0 totalpages: 3145102
0.000000] DMA zone: 64 pages used for memmap
0.000000] DMA zone: 21 pages reserved
0.000000] DMA zone: 3998 pages, LIFO batch:0
0.000000] DMA32 zone: 13240 pages used for memmap
0.000000] DMA32 zone: 847344 pages, LIFO batch:31
0.000000] Normal zone: 35840 pages used for memmap
0.000000] Normal zone: 2293760 pages, LIFO batch:31
0.000000] ACPI: PM-Timer IO Port: 0x4008
0.000000] ACPI: Local APIC address 0xfee00000
0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
0.000000] ACPI: IRQ0 used by override.
0.000000] ACPI: IRQ2 used by override.
0.000000] ACPI: IRQ9 used by override.
0.000000] Using ACPI (MADT) for SMP configuration information
0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
0.000000] smpboot: Allowing 8 CPUs, 5 hotplug CPUs
0.000000] nr_irqs_gsi: 40
0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
0.000000] PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfdf3000
0.000000] PM: Registered nosave memory: 00000000cfdf3000 - 00000000cfe00000
0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000cff00000
0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
0.000000] e820: [mem 0xcff00000-0xdfffffff] available for PCI devices
0.000000] Booting paravirtualized kernel on bare hardware
0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
0.000000] PERCPU: Embedded 28 pages/cpu @ffff88032fc00000 s85824 r8192 d20672 u262144
0.000000] pcpu-alloc: s85824 r8192 d20672 u262144 alloc=1*2097152
0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3095937
0.000000] Policy zone: Normal
0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=90b0c2df-9b19-4c19-91ce-5479b086da4d ro quiet
0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
0.000000] __ex_table already sorted, skipping sort
0.000000] Checking aperture...
0.000000] No AGP bridge found
0.000000] Node 0: aperture @ c4000000 size 32 MB
0.000000] Aperture pointing to e820 RAM. Ignoring.
0.000000] Your BIOS doesn't leave a aperture memory hole
0.000000] Please enable the IOMMU option in the BIOS setup
0.000000] This costs you 64 MB of RAM
0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
0.000000] Memory: 12235744k/13369344k available (4984k kernel code, 788936k absent, 344664k reserved, 3966k data, 1092k init)
0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
0.000000] Preemptible hierarchical RCU implementation.
0.000000] RCU dyntick-idle grace-period acceleration is enabled.
0.000000] Dump stacks of tasks blocking RCU-preempt GP.
0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
0.000000] NR_IRQS:4352 nr_irqs:744 16
0.000000] spurious 8259A interrupt: IRQ7.
0.000000] Console: colour dummy device 80x25
0.000000] console [tty0] enabled
0.000000] allocated 50331648 bytes of page_cgroup
0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
0.000000] hpet clockevent registered
0.003333] tsc: Fast TSC calibration using PIT
0.006666] tsc: Detected 2812.672 MHz processor
0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5627.73 BogoMIPS (lpj=9375573)
0.000006] pid_max: default: 32768 minimum: 301
0.000035] Security Framework initialized
0.000041] AppArmor: AppArmor disabled by boot time parameter
0.000892] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
0.005505] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
0.007582] Mount-cache hash table entries: 256
0.007774] Initializing cgroup subsys cpuacct
0.007776] Initializing cgroup subsys memory
0.007786] Initializing cgroup subsys devices
0.007787] Initializing cgroup subsys freezer
0.007789] Initializing cgroup subsys net_cls
0.007790] Initializing cgroup subsys blkio
0.007813] tseg: 00cff00000
0.007816] CPU: Physical Processor ID: 0
0.007817] CPU: Processor Core ID: 0
0.007818] mce: CPU supports 6 MCE banks
0.007823] LVT offset 0 assigned for vector 0xf9
0.007828] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
0.007828] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
0.007828] tlb_flushall_shift: 4
0.007908] Freeing SMP alternatives: 20k freed
0.008523] ACPI: Core revision 20130117
0.010353] ACPI: All ACPI Tables successfully acquired
0.042664] ftrace: allocating 19546 entries in 77 pages
0.399338] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
0.432338] smpboot: CPU0: AMD Phenom(tm) II X3 720 Processor (fam: 10, model: 04, stepping: 02)
0.535738] Performance Events: AMD PMU driver.
0.535742] ... version: 0
0.535743] ... bit width: 48
0.535744] ... generic registers: 4
0.535745] ... value mask: 0000ffffffffffff
0.535746] ... max period: 00007fffffffffff
0.535746] ... fixed-purpose events: 0
0.535747] ... event mask: 000000000000000f
0.565797] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
0.572465] smpboot: Booting Node 0, Processors #1 #2
0.602275] Brought up 3 CPUs
0.602279] smpboot: Total of 3 processors activated (16882.19 BogoMIPS)
0.605948] devtmpfs: initialized
0.608503] PM: Registering ACPI NVS region [mem 0xcfdf0000-0xcfdf2fff] (12288 bytes)
0.609303] RTC time: 21:44:15, date: 06/16/13
0.609349] NET: Registered protocol family 16
0.609448] node 0 link 0: io port [b000, ffff]
0.609451] TOM: 00000000d0000000 aka 3328M
0.609453] Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
0.609455] node 0 link 0: mmio [a0000, bffff]
0.609457] node 0 link 0: mmio [d0000000, dfffffff]
0.609459] node 0 link 0: mmio [f0000000, fe02ffff]
0.609460] node 0 link 0: mmio [e0000000, e04fffff] ==> [e0100000, e04fffff]
0.609462] TOM2: 0000000330000000 aka 13056M
0.609464] bus: [bus 00-04] on node 0 link 0
0.609466] bus: 00 [io 0x0000-0xffff]
0.609467] bus: 00 [mem 0x000a0000-0x000bffff]
0.609468] bus: 00 [mem 0xd0000000-0xdfffffff]
0.609469] bus: 00 [mem 0xe0500000-0xffffffff]
0.609470] bus: 00 [mem 0xe0100000-0xe04fffff]
0.609471] bus: 00 [mem 0x330000000-0xfcffffffff]
0.609498] ACPI: bus type PCI registered
0.609552] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
0.609554] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
0.617921] PCI: Using configuration type 1 for base access
0.618123] mtrr: your CPUs had inconsistent variable MTRR settings
0.618124] mtrr: probably your BIOS does not setup all CPUs.
0.618125] mtrr: corrected configuration.
0.618516] bio: create slab <bio-0> at 0
0.618576] ACPI: Added _OSI(Module Device)
0.618577] ACPI: Added _OSI(Processor Device)
0.618578] ACPI: Added _OSI(3.0 _SCP Extensions)
0.618580] ACPI: Added _OSI(Processor Aggregator Device)
0.619096] ACPI: EC: Look up EC in DSDT
0.623380] ACPI: Interpreter enabled
0.623389] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568)
0.623394] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
0.623403] ACPI: (supports S0 S3 S4 S5)
0.623405] ACPI: Using IOAPIC for interrupt routing
0.623473] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
0.637118] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
0.637201] PCI host bridge to bus 0000:00
0.637204] pci_bus 0000:00: root bus resource [bus 00-ff]
0.637207] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
0.637209] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
0.637210] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
0.637212] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
0.637214] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff]
0.637223] pci 0000:00:00.0: [1002:5958] type 00 class 0x060000
0.637234] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
0.637312] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
0.637342] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
0.637366] pci 0000:00:02.0: System wakeup disabled by ACPI
0.637399] pci 0000:00:04.0: [1002:597a] type 01 class 0x060400
0.637428] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
0.637453] pci 0000:00:04.0: System wakeup disabled by ACPI
0.637485] pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400
0.637514] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
0.637542] pci 0000:00:0a.0: System wakeup disabled by ACPI
0.637581] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
0.637600] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
0.637609] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
0.637618] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
0.637627] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
0.637636] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
0.637645] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
0.637664] pci 0000:00:11.0: set SATA to AHCI mode
0.637736] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
0.637749] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
0.637811] pci 0000:00:12.0: System wakeup disabled by ACPI
0.637840] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
0.637853] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
0.637916] pci 0000:00:12.1: System wakeup disabled by ACPI
0.637948] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
0.637966] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
0.638046] pci 0000:00:12.2: supports D1 D2
0.638047] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
0.638065] pci 0000:00:12.2: System wakeup disabled by ACPI
0.638099] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
0.638112] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
0.638178] pci 0000:00:13.0: System wakeup disabled by ACPI
0.638205] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
0.638217] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
0.638282] pci 0000:00:13.1: System wakeup disabled by ACPI
0.638316] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
0.638334] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
0.638414] pci 0000:00:13.2: supports D1 D2
0.638415] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
0.638436] pci 0000:00:13.2: System wakeup disabled by ACPI
0.638472] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
0.638587] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
0.638602] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
0.638611] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
0.638620] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
0.638629] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
0.638638] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
0.638722] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
0.638743] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
0.638806] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
0.638830] pci 0000:00:14.2: System wakeup disabled by ACPI
0.638857] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
0.638963] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
0.639012] pci 0000:00:14.4: System wakeup disabled by ACPI
0.639040] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
0.639053] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
0.639119] pci 0000:00:14.5: System wakeup disabled by ACPI
0.639151] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
0.639203] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
0.639254] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
0.639305] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
0.639358] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
0.639454] pci 0000:01:00.0: [1002:94b3] type 00 class 0x030000
0.639466] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
0.639475] pci 0000:01:00.0: reg 18: [mem 0xfdee0000-0xfdeeffff 64bit]
0.639482] pci 0000:01:00.0: reg 20: [io 0xee00-0xeeff]
0.639493] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
0.639520] pci 0000:01:00.0: supports D1 D2
0.639554] pci 0000:01:00.1: [1002:aa38] type 00 class 0x040300
0.639566] pci 0000:01:00.1: reg 10: [mem 0xfdefc000-0xfdefffff 64bit]
0.639616] pci 0000:01:00.1: supports D1 D2
0.648955] pci 0000:00:02.0: PCI bridge to [bus 01]
0.648960] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
0.648963] pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdefffff]
0.648966] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
0.649016] pci 0000:02:00.0: [197b:2363] type 00 class 0x010185
0.649081] pci 0000:02:00.0: reg 24: [mem 0xfddfe000-0xfddfffff]
0.649130] pci 0000:02:00.0: PME# supported from D3hot
0.649179] pci 0000:02:00.1: [197b:2363] type 00 class 0x010185
0.649197] pci 0000:02:00.1: reg 10: [io 0xdf00-0xdf07]
0.649207] pci 0000:02:00.1: reg 14: [io 0xde00-0xde03]
0.649217] pci 0000:02:00.1: reg 18: [io 0xdd00-0xdd07]
0.649227] pci 0000:02:00.1: reg 1c: [io 0xdc00-0xdc03]
0.649237] pci 0000:02:00.1: reg 20: [io 0xdb00-0xdb0f]
0.649319] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
0.649326] pci 0000:00:04.0: PCI bridge to [bus 02]
0.649329] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
0.649331] pci 0000:00:04.0: bridge window [mem 0xfdd00000-0xfddfffff]
0.649334] pci 0000:00:04.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
0.649377] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
0.649389] pci 0000:03:00.0: reg 10: [io 0xce00-0xceff]
0.649408] pci 0000:03:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
0.649421] pci 0000:03:00.0: reg 20: [mem 0xfdfe0000-0xfdfeffff 64bit pref]
0.649430] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
0.649474] pci 0000:03:00.0: supports D1 D2
0.649475] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
0.658954] pci 0000:00:0a.0: PCI bridge to [bus 03]
0.658959] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
0.658961] pci 0000:00:0a.0: bridge window [mem 0xfd900000-0xfd9fffff]
0.658964] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
0.659008] pci 0000:04:06.0: [1131:7146] type 00 class 0x048000
0.659025] pci 0000:04:06.0: reg 10: [mem 0xfdbff000-0xfdbff1ff]
0.659127] pci 0000:04:07.0: [9710:9805] type 00 class 0x078000
0.659143] pci 0000:04:07.0: reg 10: [io 0xbf00-0xbf07]
0.659155] pci 0000:04:07.0: reg 14: [io 0xbe00-0xbe07]
0.659167] pci 0000:04:07.0: reg 18: [io 0xbd00-0xbd07]
0.659179] pci 0000:04:07.0: reg 1c: [io 0xbc00-0xbc07]
0.659190] pci 0000:04:07.0: reg 20: [io 0xbb00-0xbb07]
0.659202] pci 0000:04:07.0: reg 24: [io 0xba00-0xba0f]
0.659264] pci 0000:04:0e.0: [104c:8024] type 00 class 0x0c0010
0.659286] pci 0000:04:0e.0: reg 10: [mem 0xfdbfe000-0xfdbfe7ff]
0.659298] pci 0000:04:0e.0: reg 14: [mem 0xfdbf8000-0xfdbfbfff]
0.659387] pci 0000:04:0e.0: supports D1 D2
0.659389] pci 0000:04:0e.0: PME# supported from D0 D1 D2 D3hot
0.659445] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
0.659449] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
0.659453] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
0.659457] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]
0.659458] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
0.659460] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
0.659462] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
0.659463] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
0.659465] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
0.659479] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
0.659481] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
0.659908] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.659945] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.659979] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.660012] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.660045] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.660078] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.660111] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.660144] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.660468] acpi root: \_SB_.PCI0 notify handler is installed
0.660494] Found 1 acpi root devices
0.660564] ACPI: No dock devices found.
0.660640] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
0.660643] vgaarb: loaded
0.660644] vgaarb: bridge control possible 0000:01:00.0
0.660676] PCI: Using ACPI for IRQ routing
0.668997] PCI: pci_cache_line_size set to 64 bytes
0.669004] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
0.669070] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
0.669071] e820: reserve RAM buffer [mem 0xcfdf0000-0xcfffffff]
0.669150] NetLabel: Initializing
0.669151] NetLabel: domain hash size = 128
0.669152] NetLabel: protocols = UNLABELED CIPSOv4
0.669161] NetLabel: unlabeled traffic allowed by default
0.669177] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
0.669180] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
0.671205] Switching to clocksource hpet
0.674983] pnp: PnP ACPI init
0.674994] ACPI: bus type PNP registered
0.675058] system 00:00: [io 0x04d0-0x04d1] has been reserved
0.675060] system 00:00: [io 0x0220-0x0225] has been reserved
0.675062] system 00:00: [io 0x0290-0x0294] has been reserved
0.675065] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
0.675512] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
0.675535] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
0.675543] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
0.675575] system 00:01: [io 0x4100-0x411f] has been reserved
0.675578] system 00:01: [io 0x0228-0x022f] has been reserved
0.675580] system 00:01: [io 0x040b] has been reserved
0.675581] system 00:01: [io 0x04d6] has been reserved
0.675583] system 00:01: [io 0x0c00-0x0c01] has been reserved
0.675585] system 00:01: [io 0x0c14] has been reserved
0.675586] system 00:01: [io 0x0c50-0x0c52] has been reserved
0.675588] system 00:01: [io 0x0c6c-0x0c6d] has been reserved
0.675589] system 00:01: [io 0x0c6f] has been reserved
0.675591] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
0.675593] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
0.675594] system 00:01: [io 0x0cd4-0x0cdf] has been reserved
0.675596] system 00:01: [io 0x4000-0x40fe] has been reserved
0.675597] system 00:01: [io 0x4210-0x4217] has been reserved
0.675599] system 00:01: [io 0x0b00-0x0b0f] has been reserved
0.675601] system 00:01: [io 0x0b10-0x0b1f] has been reserved
0.675602] system 00:01: [io 0x0b20-0x0b3f] has been reserved
0.675604] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
0.675608] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
0.675676] pnp 00:02: [dma 4]
0.675693] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
0.675740] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
0.675772] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
0.675791] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
0.675815] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
0.676004] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
0.676006] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
0.676106] pnp 00:08: disabling [mem 0x000cfe00-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
0.676108] pnp 00:08: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
0.676110] pnp 00:08: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
0.676112] pnp 00:08: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
0.676114] pnp 00:08: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
0.676117] pnp 00:08: disabling [mem 0x00100000-0xcfdeffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
0.676153] system 00:08: [mem 0xcfdf0000-0xcfdfffff] could not be reserved
0.676155] system 00:08: [mem 0xffff0000-0xffffffff] has been reserved
0.676157] system 00:08: [mem 0xcfe00000-0xcfefffff] has been reserved
0.676159] system 00:08: [mem 0xcff00000-0xcfffffff] could not be reserved
0.676161] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
0.676162] system 00:08: [mem 0xfee00000-0xfee00fff] could not be reserved
0.676164] system 00:08: [mem 0xfff80000-0xfffeffff] has been reserved
0.676166] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
0.676180] pnp: PnP ACPI: found 9 devices
0.676182] ACPI: bus type PNP unregistered
0.682550] pci 0000:01:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
0.682553] pci 0000:00:02.0: PCI bridge to [bus 01]
0.682556] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
0.682558] pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdefffff]
0.682561] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
0.682564] pci 0000:00:04.0: PCI bridge to [bus 02]
0.682566] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
0.682568] pci 0000:00:04.0: bridge window [mem 0xfdd00000-0xfddfffff]
0.682570] pci 0000:00:04.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
0.682574] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf0ffff pref]
0.682575] pci 0000:00:0a.0: PCI bridge to [bus 03]
0.682577] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
0.682579] pci 0000:00:0a.0: bridge window [mem 0xfd900000-0xfd9fffff]
0.682582] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
0.682585] pci 0000:00:14.4: PCI bridge to [bus 04]
0.682587] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
0.682592] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
0.682595] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]
0.682771] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
0.682772] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
0.682774] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
0.682775] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
0.682777] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]
0.682779] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
0.682780] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
0.682782] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
0.682784] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
0.682785] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
0.682787] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
0.682788] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
0.682790] pci_bus 0000:03: resource 1 [mem 0xfd900000-0xfd9fffff]
0.682791] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
0.682793] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
0.682795] pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff]
0.682796] pci_bus 0000:04: resource 2 [mem 0xfda00000-0xfdafffff pref]
0.682798] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
0.682799] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]

I managed to get my wired connection back and updated my system. After that (and a reboot), NetworkManager started to mysteriously work.
Here are the relevant parts from journald's log:
kesä 17 17:47:40 sunnydale dbus-daemon[396]: dbus[396]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
kesä 17 17:47:40 sunnydale dbus[396]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
kesä 17 17:47:40 sunnydale systemd[1]: Starting Network Manager Script Dispatcher Service...
kesä 17 17:47:40 sunnydale dbus-daemon[396]: dbus[396]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
kesä 17 17:47:40 sunnydale dbus[396]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
kesä 17 17:47:40 sunnydale systemd[1]: Started Network Manager Script Dispatcher Service.
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) starting connection 'dna internet connection'
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: disconnected -> prepare (reason 'none') [30 40 0]
kesä 17 17:47:49 sunnydale NetworkManager[387]: <debug> [1371480469.388835] [nm-manager.c:596] manager_device_state_changed(): stopping connectivity checks
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 1 of 5 (Device Prepare) scheduled...
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 1 of 5 (Device Prepare) started...
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 2 of 5 (Device Configure) scheduled...
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 1 of 5 (Device Prepare) complete.
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 2 of 5 (Device Configure) starting...
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: prepare -> config (reason 'none') [40 50 0]
kesä 17 17:47:49 sunnydale NetworkManager[387]: <debug> [1371480469.390823] [nm-manager.c:596] manager_device_state_changed(): stopping connectivity checks
kesä 17 17:47:49 sunnydale NetworkManager[387]: <debug> [1371480469.398034] [nm-device-bt.c:947] act_stage2_config(): (40:98:4E:65:A1:00): requesting connection to the device
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 2 of 5 (Device Configure) complete.
kesä 17 17:47:52 sunnydale NetworkManager[387]: <debug> [1371480472.813677] [nm-device-bt.c:836] bluez_property_changed(): (40:98:4E:65:A1:00): bluez property 'Connected' changed to 'true'
kesä 17 17:47:52 sunnydale NetworkManager[387]: <debug> [1371480472.813775] [nm-device-bt.c:846] bluez_property_changed(): (40:98:4E:65:A1:00): connected to the device
kesä 17 17:47:53 sunnydale NetworkManager[387]: <debug> [1371480473.67585] [nm-device-bt.c:808] bluez_connect_cb(): (40:98:4E:65:A1:00): connect request successful
kesä 17 17:47:53 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00 40:98:4E:65:A1:00/bluetooth) Stage 2 of 5 (Device Configure) successful. Will connect via DUN.
kesä 17 17:47:53 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00/bluetooth) Stage 2 of 5 (Device Configure) waiting for modem to appear.
kesä 17 17:47:53 sunnydale upowerd[518]: (upowerd:518): UPower-Linux-WARNING **: unhandled action 'move' on /sys/devices/pci0000:00/0000:00:13.1/usb4/4-3/4-3:1.0/bluetooth/hci0/hci0:21/rfcomm0
kesä 17 17:47:53 sunnydale kernel: Bluetooth: TIOCGSERIAL is not supported
kesä 17 17:47:54 sunnydale kernel: Bluetooth: TIOCGSERIAL is not supported
kesä 17 17:47:54 sunnydale kernel: Bluetooth: TIOCGSERIAL is not supported
kesä 17 17:47:56 sunnydale ModemManager[390]: <info> Creating modem with plugin 'Nokia' and '1' ports
kesä 17 17:47:56 sunnydale ModemManager[390]: <info> Modem for device at '/sys/devices/pci0000:00/0000:00:13.1/usb4/4-3' successfully created
kesä 17 17:47:56 sunnydale kernel: Bluetooth: TIOCGSERIAL is not supported
kesä 17 17:47:56 sunnydale kernel: Bluetooth: TIOCGSERIAL is not supported
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem: state changed (unknown -> disabled)
kesä 17 17:47:57 sunnydale kernel: Bluetooth: TIOCGSERIAL is not supported
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00/bluetooth) Stage 2 of 5 (Device Configure) modem found.
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Simple connect started...
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Simple connect state (3/8): Enable
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (disabled -> enabling)
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> (rfcomm0) modem state changed, 'disabled' --> 'enabling' (reason: user-requested)
kesä 17 17:47:57 sunnydale kernel: Bluetooth: TIOCGSERIAL is not supported
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: 3GPP Registration state changed (unknown -> registering)
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (enabling -> enabled)
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Simple connect state (4/8): Wait to get fully enabled
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Simple connect state (5/8): Register
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Simple connect state (6/8): Bearer
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> (rfcomm0) modem state changed, 'enabling' --> 'enabled' (reason: user-requested)
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Simple connect state (7/8): Connect
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (enabled -> connecting)
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> (rfcomm0) modem state changed, 'enabled' --> 'connecting' (reason: user-requested)
kesä 17 17:47:57 sunnydale ModemManager[390]: <warn> Couldn't load Operator Name: 'Unknown error'
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: 3GPP Registration state changed (registering -> home)
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: 3GPP location updated (MCC: '0', MNC: '0', Location area code: 'A1', Cell ID: '10C654')
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (connecting -> connected)
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Simple connect state (8/8): All done
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> (rfcomm0) modem state changed, 'connecting' --> 'connected' (reason: user-requested)
kesä 17 17:47:57 sunnydale NetworkManager[387]: <warn> (rfcomm0): failed to look up interface index
kesä 17 17:47:57 sunnydale NetworkManager[387]: <debug> [1371480477.987235] [nm-device.c:3066] nm_device_activate_schedule_stage3_ip_config_start(): Activation (40:98:4E:65:A1:00) setting firewall zone 'default'
kesä 17 17:47:57 sunnydale NetworkManager[387]: <debug> [1371480477.987260] [nm-firewall-manager.c:107] nm_firewall_manager_add_or_change_zone(): (rfcomm0) firewall zone add/change skipped (not running)
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 3 of 5 (IP Configure Start) scheduled.
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 3 of 5 (IP Configure Start) started...
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: config -> ip-config (reason 'none') [50 70 0]
kesä 17 17:47:57 sunnydale NetworkManager[387]: <debug> [1371480477.987628] [nm-manager.c:596] manager_device_state_changed(): stopping connectivity checks
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> using modem-specified IP timeout: 20 seconds
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> starting PPP connection
kesä 17 17:47:57 sunnydale NetworkManager[387]: <debug> [1371480477.988323] [nm-ppp-manager.c:1068] nm_ppp_manager_start(): command line: /usr/sbin/pppd nodetach lock nodefaultroute ipv6 , debug rfcomm0 noipdefault noauth usepeerdns lcp-echo-failure 0 lcp-echo-interval 0 ipparam /org/freedesktop/NetworkManager/PPP/0 plugin /usr/lib/pppd/2.4.5/nm-pppd-plugin.so
kesä 17 17:47:58 sunnydale NetworkManager[387]: <info> pppd started with pid 914
kesä 17 17:47:58 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
kesä 17 17:47:58 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 3 of 5 (IP Configure Start) complete.
kesä 17 17:47:58 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 4 of 5 (IPv6 Configure Timeout) started...
kesä 17 17:47:58 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 4 of 5 (IPv6 Configure Timeout) complete.
kesä 17 17:47:58 sunnydale pppd[914]: Plugin /usr/lib/pppd/2.4.5/nm-pppd-plugin.so loaded.
kesä 17 17:47:58 sunnydale NetworkManager[387]: Plugin /usr/lib/pppd/2.4.5/nm-pppd-plugin.so loaded.
kesä 17 17:47:58 sunnydale kernel: PPP generic driver version 2.4.2
kesä 17 17:47:58 sunnydale pppd[914]: pppd 2.4.5 started by root, uid 0
kesä 17 17:47:58 sunnydale pppd[914]: using channel 1
kesä 17 17:47:58 sunnydale pppd[914]: Using interface ppp0
kesä 17 17:47:58 sunnydale pppd[914]: Connect: ppp0 <--> /dev/rfcomm0
kesä 17 17:47:58 sunnydale pppd[914]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x2ae21925> <pcomp> <accomp>]
kesä 17 17:47:58 sunnydale NetworkManager[387]: <debug> [1371480478.113258] [nm-netlink-monitor.c:164] link_msg_handler(): netlink link message: iface idx 3 flags 0x1090
kesä 17 17:47:58 sunnydale NetworkManager[387]: using channel 1
kesä 17 17:47:58 sunnydale NetworkManager[387]: Using interface ppp0
kesä 17 17:47:58 sunnydale NetworkManager[387]: Connect: ppp0 <--> /dev/rfcomm0
kesä 17 17:47:58 sunnydale NetworkManager[387]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x2ae21925> <pcomp> <accomp>]
kesä 17 17:47:58 sunnydale systemd-sysctl[922]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
kesä 17 17:47:58 sunnydale NetworkManager[387]: <debug> [1371480478.116359] [nm-udev-manager.c:568] handle_uevent(): UDEV event: action 'add' subsys 'net' device 'ppp0'
kesä 17 17:47:58 sunnydale NetworkManager[387]: <warn> /sys/devices/virtual/net/ppp0: couldn't determine device driver; ignoring...
kesä 17 17:47:58 sunnydale pppd[914]: rcvd [LCP ConfRej id=0x1 <magic 0x2ae21925> <pcomp> <accomp>]
kesä 17 17:47:58 sunnydale pppd[914]: sent [LCP ConfReq id=0x2 <asyncmap 0x0>]
kesä 17 17:47:58 sunnydale NetworkManager[387]: rcvd [LCP ConfRej id=0x1 <magic 0x2ae21925> <pcomp> <accomp>]
kesä 17 17:47:58 sunnydale NetworkManager[387]: sent [LCP ConfReq id=0x2 <asyncmap 0x0>]
kesä 17 17:47:58 sunnydale pppd[914]: rcvd [LCP ConfAck id=0x2 <asyncmap 0x0>]
kesä 17 17:47:58 sunnydale NetworkManager[387]: rcvd [LCP ConfAck id=0x2 <asyncmap 0x0>]
kesä 17 17:47:58 sunnydale pppd[914]: rcvd [LCP ConfReq id=0x0 <auth pap> <mru 1500> <asyncmap 0xa0000>]
kesä 17 17:47:58 sunnydale pppd[914]: sent [LCP ConfAck id=0x0 <auth pap> <mru 1500> <asyncmap 0xa0000>]
kesä 17 17:47:58 sunnydale NetworkManager[387]: rcvd [LCP ConfReq id=0x0 <auth pap> <mru 1500> <asyncmap 0xa0000>]
kesä 17 17:47:58 sunnydale NetworkManager[387]: sent [LCP ConfAck id=0x0 <auth pap> <mru 1500> <asyncmap 0xa0000>]
kesä 17 17:47:58 sunnydale pppd[914]: sent [PAP AuthReq id=0x1 user="" password=<hidden>]
kesä 17 17:47:58 sunnydale NetworkManager[387]: sent [PAP AuthReq id=0x1 user="" password=<hidden>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [PAP AuthReq id=0x2 user="" password=<hidden>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [PAP AuthReq id=0x2 user="" password=<hidden>]
kesä 17 17:48:01 sunnydale pppd[914]: rcvd [PAP AuthAck id=0x2 ""]
kesä 17 17:48:01 sunnydale pppd[914]: PAP authentication succeeded
kesä 17 17:48:01 sunnydale NetworkManager[387]: rcvd [PAP AuthAck id=0x2 ""]
kesä 17 17:48:01 sunnydale NetworkManager[387]: PAP authentication succeeded
kesä 17 17:48:01 sunnydale kernel: PPP BSD Compression module registered
kesä 17 17:48:01 sunnydale pppd[914]: sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:01 sunnydale pppd[914]: rcvd [IPCP ConfReq id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [IPCP ConfAck id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: rcvd [IPCP ConfReq id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [IPCP ConfAck id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:01 sunnydale kernel: PPP Deflate Compression module registered
kesä 17 17:48:01 sunnydale pppd[914]: rcvd [LCP ProtRej id=0x0 80 fd 01 01 00 0f 1a 04 78 00 18 04 78 00 15 03 2f]
kesä 17 17:48:01 sunnydale pppd[914]: Protocol-Reject for 'Compression Control Protocol' (0x80fd) received
kesä 17 17:48:01 sunnydale NetworkManager[387]: rcvd [LCP ProtRej id=0x0 80 fd 01 01 00 0f 1a 04 78 00 18 04 78 00 15 03 2f]
kesä 17 17:48:01 sunnydale NetworkManager[387]: Protocol-Reject for 'Compression Control Protocol' (0x80fd) received
kesä 17 17:48:01 sunnydale pppd[914]: rcvd [IPV6CP ConfReq id=0x0 <addr fe80::0000:0000:0000:0000>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [IPV6CP ConfNak id=0x0 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: rcvd [IPV6CP ConfReq id=0x0 <addr fe80::0000:0000:0000:0000>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [IPV6CP ConfNak id=0x0 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale pppd[914]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale pppd[914]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale pppd[914]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:02 sunnydale pppd[914]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:02 sunnydale pppd[914]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:02 sunnydale NetworkManager[387]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:02 sunnydale NetworkManager[387]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:03 sunnydale pppd[914]: rcvd [IPCP ConfRej id=0x1 <compress VJ 0f 01>]
kesä 17 17:48:03 sunnydale pppd[914]: sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>]
kesä 17 17:48:03 sunnydale NetworkManager[387]: rcvd [IPCP ConfRej id=0x1 <compress VJ 0f 01>]
kesä 17 17:48:03 sunnydale NetworkManager[387]: sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>]
kesä 17 17:48:03 sunnydale pppd[914]: rcvd [IPCP ConfNak id=0x2 <addr 10.241.96.30> <ms-dns1 62.241.198.245> <ms-dns2 62.241.198.246>]
kesä 17 17:48:03 sunnydale pppd[914]: sent [IPCP ConfReq id=0x3 <addr 10.241.96.30> <ms-dns1 62.241.198.245> <ms-dns2 62.241.198.246>]
kesä 17 17:48:03 sunnydale NetworkManager[387]: rcvd [IPCP ConfNak id=0x2 <addr 10.241.96.30> <ms-dns1 62.241.198.245> <ms-dns2 62.241.198.246>]
kesä 17 17:48:03 sunnydale NetworkManager[387]: sent [IPCP ConfReq id=0x3 <addr 10.241.96.30> <ms-dns1 62.241.198.245> <ms-dns2 62.241.198.246>]
kesä 17 17:48:03 sunnydale pppd[914]: rcvd [IPCP ConfReq id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:03 sunnydale pppd[914]: sent [IPCP ConfAck id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:03 sunnydale NetworkManager[387]: rcvd [IPCP ConfReq id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:03 sunnydale NetworkManager[387]: sent [IPCP ConfAck id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:03 sunnydale pppd[914]: rcvd [IPCP ConfAck id=0x3 <addr 10.241.96.30> <ms-dns1 62.241.198.245> <ms-dns2 62.241.198.246>]
kesä 17 17:48:03 sunnydale pppd[914]: Cannot determine ethernet address for proxy ARP
kesä 17 17:48:03 sunnydale pppd[914]: local IP address 10.241.96.30
kesä 17 17:48:03 sunnydale pppd[914]: remote IP address 10.6.6.6
kesä 17 17:48:03 sunnydale pppd[914]: primary DNS address 62.241.198.245
kesä 17 17:48:03 sunnydale pppd[914]: secondary DNS address 62.241.198.246
kesä 17 17:48:03 sunnydale pppd[914]: Script /etc/ppp/ip-up started (pid 928)
kesä 17 17:48:03 sunnydale NetworkManager[387]: <debug> [1371480483.851617] [nm-netlink-monitor.c:164] link_msg_handler(): netlink link message: iface idx 3 flags 0x110D1
kesä 17 17:48:03 sunnydale NetworkManager[387]: <info> PPP manager(IP Config Get) reply received.
kesä 17 17:48:03 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
kesä 17 17:48:03 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 5 of 5 (IPv4 Commit) started...
kesä 17 17:48:03 sunnydale NetworkManager[387]: <debug> [1371480483.852986] [nm-system.c:194] sync_addresses(): (ppp0): syncing addresses (family 2)
kesä 17 17:48:03 sunnydale NetworkManager[387]: <debug> [1371480483.853021] [nm-system.c:247] sync_addresses(): (ppp0): removing address '10.241.96.30/32'
kesä 17 17:48:03 sunnydale NetworkManager[387]: rcvd [IPCP ConfAck id=0x3 <addr 10.241.96.30> <ms-dns1 62.241.198.245> <ms-dns2 62.241.198.246>]
kesä 17 17:48:03 sunnydale NetworkManager[387]: Cannot determine ethernet address for proxy ARP
kesä 17 17:48:03 sunnydale NetworkManager[387]: local IP address 10.241.96.30
kesä 17 17:48:03 sunnydale NetworkManager[387]: remote IP address 10.6.6.6
kesä 17 17:48:03 sunnydale NetworkManager[387]: primary DNS address 62.241.198.245
kesä 17 17:48:03 sunnydale NetworkManager[387]: secondary DNS address 62.241.198.246
kesä 17 17:48:03 sunnydale NetworkManager[387]: Script /etc/ppp/ip-up started (pid 928)
kesä 17 17:48:03 sunnydale NetworkManager[387]: <debug> [1371480483.853775] [nm-system.c:280] sync_addresses(): (ppp0): adding address '10.241.96.30/0'
kesä 17 17:48:03 sunnydale pppd[914]: Script /etc/ppp/ip-up finished (pid 928), status = 0x2
kesä 17 17:48:03 sunnydale NetworkManager[387]: Script /etc/ppp/ip-up finished (pid 928), status = 0x2
kesä 17 17:48:04 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:04 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.855173] [nm-netlink-utils.c:356] dump_route(): route idx 3 family INET (2) addr 10.6.6.6/32
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.855250] [nm-netlink-utils.c:356] dump_route(): route idx 3 family INET (2) addr 10.241.96.30/32
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.855608] [nm-dns-manager.c:995] nm_dns_manager_begin_updates(): (device_ip4_config_changed): queueing DNS updates (1)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.855649] [nm-dns-manager.c:1013] nm_dns_manager_end_updates(): (nm_dns_manager_end_updates): DNS configuration did not change
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.855666] [nm-dns-manager.c:1017] nm_dns_manager_end_updates(): (device_ip4_config_changed): no DNS changes to commit (0)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: ip-config -> secondaries (reason 'none') [70 90 0]
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.855795] [nm-manager.c:596] manager_device_state_changed(): stopping connectivity checks
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.858147] [nm-device.c:5244] nm_device_queue_state(): (40:98:4E:65:A1:00): queued state change to activated (id 252)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.858200] [nm-device.c:5174] nm_device_state_changed(): (40:98:4E:65:A1:00): device entered SECONDARIES state
kesä 17 17:48:04 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 5 of 5 (IPv4 Commit) complete.
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.870449] [nm-device.c:5202] queued_set_state(): (40:98:4E:65:A1:00): running queued state change to activated (id 252)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: secondaries -> activated (reason 'none') [90 100 0]
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.872130] [nm-manager.c:591] manager_device_state_changed(): (40:98:4E:65:A1:00): triggered connectivity check due to state change
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.873625] [nm-dns-manager.c:995] nm_dns_manager_begin_updates(): (device_state_changed): queueing DNS updates (1)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.873683] [nm-dns-manager.c:995] nm_dns_manager_begin_updates(): (update_routing_and_dns): queueing DNS updates (2)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <info> Policy set 'dna internet connection' (ppp0) as default for IPv4 routing and DNS.
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.874320] [nm-dns-manager.c:1013] nm_dns_manager_end_updates(): (nm_dns_manager_end_updates): DNS configuration changed
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.874341] [nm-dns-manager.c:1017] nm_dns_manager_end_updates(): (update_routing_and_dns): no DNS changes to commit (1)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.874368] [nm-dns-manager.c:1013] nm_dns_manager_end_updates(): (nm_dns_manager_end_updates): DNS configuration changed
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.874383] [nm-dns-manager.c:1022] nm_dns_manager_end_updates(): (device_state_changed): committing DNS changes (0)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.874399] [nm-dns-manager.c:591] update_dns(): updating resolv.conf
kesä 17 17:48:04 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) successful, device activated.
kesä 17 17:48:04 sunnydale dbus-daemon[396]: dbus[396]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
kesä 17 17:48:04 sunnydale dbus[396]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
kesä 17 17:48:04 sunnydale systemd[1]: Starting Network Manager Script Dispatcher Service...
kesä 17 17:48:04 sunnydale dbus-daemon[396]: dbus[396]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
kesä 17 17:48:04 sunnydale dbus[396]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
kesä 17 17:48:04 sunnydale systemd[1]: Started Network Manager Script Dispatcher Service.
kesä 17 17:48:07 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:07 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:10 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:10 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:13 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:13 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:16 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:16 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:19 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:19 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:21 sunnydale /etc/gdm/Xsession[622]: (process:953): GLib-CRITICAL **: g_slice_set_config: assertion `sys_page_size == 0' failed
kesä 17 17:48:22 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:22 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:25 sunnydale /etc/gdm/Xsession[622]: Ikkunointiohjelman varoitus:CurrentTime used to choose focus window; focus window may not be correct.
kesä 17 17:48:25 sunnydale /etc/gdm/Xsession[622]: Ikkunointiohjelman varoitus:Got a request to focus 0x2200006 (jussi@sunn) with a timestamp of 0. This shouldn't happen!
kesä 17 17:48:25 sunnydale /etc/gdm/Xsession[622]: Ikkunointiohjelman varoitus:CurrentTime used to choose focus window; focus window may not be correct.
kesä 17 17:48:25 sunnydale /etc/gdm/Xsession[622]: Ikkunointiohjelman varoitus:Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
kesä 17 17:48:25 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:25 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:28 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:28 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:31 sunnydale pppd[914]: IPV6CP: timeout sending Config-Requests
kesä 17 17:48:31 sunnydale NetworkManager[387]: IPV6CP: timeout sending Config-Requests
kesä 17 17:49:41 sunnydale dbus-daemon[396]: dbus[396]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service'
kesä 17 17:49:41 sunnydale dbus[396]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service'
kesä 17 17:49:41 sunnydale systemd[1]: Starting Hostname Service...
kesä 17 17:49:41 sunnydale dbus-daemon[396]: dbus[396]: [system] Successfully activated service 'org.freedesktop.hostname1'
kesä 17 17:49:41 sunnydale dbus[396]: [system] Successfully activated service 'org.freedesktop.hostname1'
kesä 17 17:49:41 sunnydale systemd[1]: Started Hostname Service.
kesä 17 17:49:43 sunnydale /etc/gdm/Xsession[622]: Ikkunointiohjelman varoitus:Log level 8: meta_window_raise: assertion `!window->override_redirect' failed
kesä 17 17:49:44 sunnydale /etc/gdm/Xsession[622]: Ikkunointiohjelman varoitus:Log level 8: meta_window_lower: assertion `!window->override_redirect' failed
And here is log about the updates I made:
[2013-06-17 17:01] [PACMAN] Running 'pacman -Syu'
[2013-06-17 17:01] [PACMAN] synchronizing package lists
[2013-06-17 17:01] [PACMAN] starting full system upgrade
[2013-06-17 17:04] [PACMAN] Running 'pacman -S --asdeps polkit'
[2013-06-17 17:04] [PACMAN] upgraded polkit (0.110-2 -> 0.111-1)
[2013-06-17 17:24] [PACMAN] Running 'pacman -U --asdeps lib32-polkit-0.111-1-x86_64.pkg.tar.xz'
[2013-06-17 17:24] [PACMAN] upgraded lib32-polkit (0.110-2 -> 0.111-1)
[2013-06-17 17:27] [PACMAN] Running 'pacman -S --asdeps libxkbcommon'
[2013-06-17 17:27] [PACMAN] upgraded libxkbcommon (0.3.0-1 -> 0.3.1-1)
[2013-06-17 17:28] [PACMAN] Running 'pacman -U --asdeps lib32-libxkbcommon-0.3.1-1-x86_64.pkg.tar.xz'
[2013-06-17 17:28] [PACMAN] upgraded lib32-libxkbcommon (0.3.0-1 -> 0.3.1-1)
[2013-06-17 17:28] [PACMAN] Running 'pacman -Syu'
[2013-06-17 17:28] [PACMAN] synchronizing package lists
[2013-06-17 17:28] [PACMAN] starting full system upgrade
[2013-06-17 17:33] [PACMAN] removed lib32-dbus-core (1.6.10-1)
[2013-06-17 17:33] [PACMAN] upgraded attr (2.4.46-2 -> 2.4.47-1)
[2013-06-17 17:33] [PACMAN] upgraded acl (2.2.51-3 -> 2.2.52-1)
[2013-06-17 17:33] [PACMAN] upgraded attica (0.4.1-2 -> 0.4.2-1)
[2013-06-17 17:33] [PACMAN] upgraded cups-pk-helper (0.2.4-1 -> 0.2.5-1)
[2013-06-17 17:33] [PACMAN] upgraded dbus (1.6.10-1 -> 1.6.12-1)
[2013-06-17 17:33] [PACMAN] upgraded dosfstools (3.0.17-1 -> 3.0.20-1)
[2013-06-17 17:33] [PACMAN] upgraded gtk-update-icon-cache (2.24.18-1 -> 2.24.19-1)
[2013-06-17 17:33] [PACMAN] upgraded gtk2 (2.24.18-1 -> 2.24.19-1)
[2013-06-17 17:33] [PACMAN] upgraded flashplugin (11.2.202.285-1 -> 11.2.202.291-1)
[2013-06-17 17:33] [PACMAN] upgraded libgdm (3.8.1.1-2 -> 3.8.3-1)
[2013-06-17 17:33] [ALPM] warning: directory permissions differ on /var/log/gdm/
filesystem: 711 package: 1770
[2013-06-17 17:33] [PACMAN] upgraded gdm (3.8.1.1-2 -> 3.8.3-1)
[2013-06-17 17:33] [PACMAN] upgraded geoip-database (20130514-1 -> 20130607-1)
[2013-06-17 17:33] [PACMAN] upgraded git (1.8.3-1 -> 1.8.3.1-1)
[2013-06-17 17:33] [PACMAN] upgraded glib2 (2.36.2-1 -> 2.36.3-2)
[2013-06-17 17:33] [PACMAN] upgraded xkeyboard-config (2.9-1 -> 2.9-2)
[2013-06-17 17:33] [PACMAN] upgraded iso-codes (3.41-1 -> 3.43-1)
[2013-06-17 17:33] [PACMAN] upgraded gnome-desktop (1:3.8.3-1 -> 1:3.8.3-2)
[2013-06-17 17:33] [PACMAN] upgraded gnome-user-docs (3.8.1-1 -> 3.8.2-1)
[2013-06-17 17:33] [PACMAN] upgraded graphite (1:1.2.2-1 -> 1:1.2.3-1)
[2013-06-17 17:33] [PACMAN] upgraded gvfs (1.16.2-2 -> 1.16.3-1)
[2013-06-17 17:33] [PACMAN] upgraded gvfs-afc (1.16.2-2 -> 1.16.3-1)
[2013-06-17 17:33] [PACMAN] upgraded gvfs-goa (1.16.2-2 -> 1.16.3-1)
[2013-06-17 17:33] [ALPM-SCRIPTLET] Users no longer need to be in the 'camera' group to use camera devices
[2013-06-17 17:33] [PACMAN] upgraded libgphoto2 (2.5.1-1 -> 2.5.2-1)
[2013-06-17 17:33] [PACMAN] upgraded gvfs-gphoto2 (1.16.2-2 -> 1.16.3-1)
[2013-06-17 17:33] [PACMAN] upgraded gvfs-mtp (1.16.2-2 -> 1.16.3-1)
[2013-06-17 17:33] [PACMAN] upgraded gvfs-obexftp (1.16.2-2 -> 1.16.3-1)
[2013-06-17 17:33] [PACMAN] upgraded gvfs-smb (1.16.2-2 -> 1.16.3-1)
[2013-06-17 17:33] [PACMAN] upgraded hwids (20130512-1 -> 20130607-1)
[2013-06-17 17:33] [PACMAN] upgraded jre7-openjdk-headless (7.u21_2.3.9-4 -> 7.u40_2.4.0-1)
[2013-06-17 17:33] [PACMAN] upgraded jre7-openjdk (7.u21_2.3.9-4 -> 7.u40_2.4.0-1)
[2013-06-17 17:33] [PACMAN] upgraded jdk7-openjdk (7.u21_2.3.9-4 -> 7.u40_2.4.0-1)
[2013-06-17 17:33] [PACMAN] upgraded json-c (0.10-2 -> 0.11-1)
[2013-06-17 17:33] [PACMAN] upgraded krb5 (1.11.2-4 -> 1.11.3-1)
[2013-06-17 17:33] [PACMAN] upgraded lib32-attr (2.4.46-2 -> 2.4.47-1)
[2013-06-17 17:33] [PACMAN] upgraded lib32-acl (2.2.51-2 -> 2.2.52-1)
[2013-06-17 17:33] [PACMAN] installed lib32-dbus (1.6.12-1)
[2013-06-17 17:33] [PACMAN] upgraded lib32-gtk2 (2.24.18-1 -> 2.24.19-1)
[2013-06-17 17:33] [PACMAN] upgraded lib32-json-c (0.10-2 -> 0.11-1)
[2013-06-17 17:33] [PACMAN] upgraded lib32-krb5 (1.11.2-1 -> 1.11.3-1)
[2013-06-17 17:33] [PACMAN] upgraded libpulse (4.0-1 -> 4.0-2)
[2013-06-17 17:33] [PACMAN] upgraded lib32-libpulse (4.0-1 -> 4.0-2)
[2013-06-17 17:33] [PACMAN] upgraded libxrender (0.9.7-1 -> 0.9.8-1)
[2013-06-17 17:33] [PACMAN] upgraded lib32-libxrender (0.9.7-1 -> 0.9.8-1)
[2013-06-17 17:33] [PACMAN] upgraded libbsd (0.4.2-1 -> 0.5.2-1)
[2013-06-17 17:33] [PACMAN] upgraded libmbim (1.0.0-1 -> 1.2.0-1)
[2013-06-17 17:33] [PACMAN] upgraded libnautilus-extension (3.8.1-1 -> 3.8.2-1)
[2013-06-17 17:33] [PACMAN] upgraded libpipeline (1.2.3-1 -> 1.2.4-1)
[2013-06-17 17:33] [PACMAN] upgraded libquvi-scripts (0.4.14-1 -> 0.4.15-1)
[2013-06-17 17:33] [PACMAN] upgraded libusb-compat (0.1.4-2 -> 0.1.5-1)
[2013-06-17 17:33] [PACMAN] upgraded libxvmc (1.0.7-1 -> 1.0.8-1)
[2013-06-17 17:33] [PACMAN] upgraded link-grammar (4.7.11-1 -> 4.7.12-1)
[2013-06-17 17:33] [PACMAN] upgraded linux-firmware (20130528-1 -> 20130610-1)
[2013-06-17 17:33] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2013-06-17 17:33] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Starting build: 3.9.6-1-ARCH
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Starting build: 3.9.6-1-ARCH
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-06-17 17:33] [PACMAN] upgraded linux (3.9.5-1 -> 3.9.6-1)
[2013-06-17 17:33] [PACMAN] upgraded linux-headers (3.9.5-1 -> 3.9.6-1)
[2013-06-17 17:33] [PACMAN] upgraded lirc-utils (1:0.9.0-46 -> 1:0.9.0-47)
[2013-06-17 17:33] [PACMAN] upgraded mime-types (8-1 -> 9-1)
[2013-06-17 17:33] [ALPM] warning: extracting /usr/share/applications/nautilus.desktop as /usr/share/applications/nautilus.desktop.pacnew
[2013-06-17 17:33] [ALPM] warning: extracting /usr/share/applications/nautilus-autorun-software.desktop as /usr/share/applications/nautilus-autorun-software.desktop.pacnew
[2013-06-17 17:34] [PACMAN] upgraded nautilus (3.8.1-1 -> 3.8.2-1)
[2013-06-17 17:34] [PACMAN] upgraded p7zip (9.20.1-6 -> 9.20.1-7)
[2013-06-17 17:34] [ALPM] warning: /etc/ppp/ip-down.d/00-dns.sh installed as /etc/ppp/ip-down.d/00-dns.sh.pacnew
[2013-06-17 17:34] [ALPM] warning: /etc/ppp/ip-up.d/00-dns.sh installed as /etc/ppp/ip-up.d/00-dns.sh.pacnew
[2013-06-17 17:34] [PACMAN] upgraded ppp (2.4.5-6 -> 2.4.5-7)
[2013-06-17 17:34] [ALPM-SCRIPTLET] >>> If you have per-user copies of configuration files (such as client.conf,
[2013-06-17 17:34] [ALPM-SCRIPTLET] daemon.conf or default.pa) in ~/.pulse/, make sure you keep them in sync
[2013-06-17 17:34] [ALPM-SCRIPTLET] with changes to the packaged files in /etc/pulse/. Otherwise, PulseAudio
[2013-06-17 17:34] [ALPM-SCRIPTLET] may refuse to start due to configuration errors.
[2013-06-17 17:34] [PACMAN] upgraded pulseaudio (4.0-1 -> 4.0-2)
[2013-06-17 17:34] [PACMAN] upgraded python-dbus-common (1.1.1-2 -> 1.2.0-1)
[2013-06-17 17:34] [PACMAN] upgraded python-dbus (1.1.1-2 -> 1.2.0-1)
[2013-06-17 17:34] [PACMAN] upgraded python2-dbus (1.1.1-2 -> 1.2.0-1)
[2013-06-17 17:34] [PACMAN] upgraded sdparm (1.07-1 -> 1.08-1)
[2013-06-17 17:34] [PACMAN] upgraded sg3_utils (1.35-1 -> 1.36-1)
[2013-06-17 17:34] [PACMAN] upgraded shared-desktop-ontologies (0.10.0-1 -> 0.11.0-1)
[2013-06-17 17:34] [PACMAN] upgraded subversion (1.7.9-6 -> 1.7.10-1)
[2013-06-17 17:34] [PACMAN] upgraded sudo (1.8.6.p8-2 -> 1.8.7-1)
[2013-06-17 17:34] [PACMAN] upgraded syslog-ng (3.4.1-3 -> 3.4.2-1)
[2013-06-17 17:34] [PACMAN] upgraded usbutils (006-1 -> 007-1)
[2013-06-17 17:34] [PACMAN] upgraded webkitgtk (2.0.2-3 -> 2.0.3-1)
[2013-06-17 17:34] [PACMAN] upgraded wine (1.6rc1-1 -> 1.6rc2-1)
I'm marking this thread solved for now. If the problem arises again, I'll reopen it.

Unable to use the Logo Image

Hi all,
I want to use Logo Image at the Title of a report. But the problem is i am unable to use this .jpg file in Title Logo.
I have copied the desired jpg in these two locations :
OracleBI\Oracle_BI1\bifoundation\web\app\res\s_blafp\images
OracleBI\user_projects\domains\bifoundation_domain\servers\bi_server1\tmp\_WL_user\analytics_11.1.1\7dezjl\war\res\s_blafp\images.
Also i have restarted the Services .Then also i am unable to see the image file .
Here i have used the same process in our development server and it's working without any issues. I have done the same changes on my QA Server, but it's not working on QA.QA Server is 2 node Clustered environment.
Any help is Appreciated.
Thanks
Rondo.

You should be creating and deploying your own application for skin/style customisations, not amending images in-place. See docs:
- http://www.rittmanmead.com/2010/12/oracle-bi-ee-11g-styles-skins-custom-xml-messages
- http://www.oracle.com/technetwork/middleware/bi/customizing-oracle-biee-11g-176387.pdf

After the last Yosemite update on my MacBook pro I turned the FileVault on, now my Mac is freezing all the time and encrypting the drive looks like going to last forever and I am unable to use my MacBook pro what must I do???!!!

after the last Yosemite update on my MacBook pro I turned the FileVault on, now my Mac is freezing all the time and encrypting the drive looks like going to last forever and I am unable to use my MacBook pro what must I do???!!!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA$|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Unable to use ref cursor as a input parameter at the time of inserting reco

Hi
i am unable to use ref cursor when inserting the data to oracle 11g from visual studio 2008. please help me as early as possible my code is bellows
using System;
using System.Collections;
using System.Configuration;
using System.Data;
using System.Linq;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.HtmlControls;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Xml.Linq;
using System.Web.Configuration;
using Oracle.DataAccess.Client;
using Oracle.DataAccess.Types;
public partial class App_frmTest : System.Web.UI.Page
protected void Page_Load(object sender, EventArgs e)
protected void btnClick_Click(object sender, EventArgs e)
OracleCommand cmd=new OracleCommand();
Data objdata = new Data();
int i = 0;
string constr = "Data Source=Cwc;User Id=scott; Password=tiger;";// enlist=false; pooling=false;
OracleConnection con = new OracleConnection(constr);
/*Connection Open*/
con.Open();
cmd.Connection = con;
/*Connection Open End*/
/*Select Through Ref Cursor*/
cmd.CommandText = "scott.TEST_USER.getUSER";
cmd.CommandType = CommandType.StoredProcedure;
OracleParameter p_rc = cmd.Parameters.Add("p_rc", OracleDbType.RefCursor, DBNull.Value, ParameterDirection.Output);
OracleParameter p_rc1;
if (TextBox1.Text == "")
p_rc1 = cmd.Parameters.Add("p_rc", OracleDbType.Int16, DBNull.Value, ParameterDirection.Input);
else
p_rc1 = cmd.Parameters.Add("p_rc", OracleDbType.Int16, Convert.ToInt16(TextBox1.Text), ParameterDirection.Input);
// OracleParameter p_rc1 = cmd.Parameters.Add("p_rc", OracleDbType.Int16, 2, ParameterDirection.Input);
OracleDataReader reader = cmd.ExecuteReader();
DataSet ds = new DataSet();
DataTable dt1 = new DataTable();
dt1.Load(reader);
ds.Tables.Add(dt1);
GridView1.DataSource = ds;
GridView1.DataBind();
cmd.Parameters.Clear();
con.Close();
con.Dispose();
OracleCommand cmd1 = new OracleCommand();
OracleConnection con1 = new OracleConnection(constr);
con1.Open();
cmd1.Connection = con1;
cmd1.CommandText = "scott.TEST_USER.ADDUSER";
cmd1.CommandType = CommandType.StoredProcedure;
OracleParameter P_ADDUSER = cmd1.Parameters.Add("P_ADDUSER", OracleDbType.RefCursor, DBNull.Value, ParameterDirection.Input);
cmd1.ExecuteNonQuery(); // i am getting error when executing this line
Server Error in '/CWC' Application.
Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
Source Error:
Line 77: OracleParameter P_ADDUSER = cmd1.Parameters.Add("P_ADDUSER", OracleDbType.RefCursor, DBNull.Value, ParameterDirection.Input);
Line 78: //OracleParameter P_MSG = cmd.Parameters.Add("P_MSG", OracleDbType.Varchar2, DBNull.Value, ParameterDirection.Output);
Line 79: cmd1.ExecuteNonQuery();
Line 80:
Line 81: DataTable dt = new DataTable();
Source File: d:\CWC\App\frmTest.aspx.cs Line: 79
Stack Trace:
[AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.]
Oracle.DataAccess.Client.OpsSql.ExecuteNonQuery(IntPtr opsConCtx, IntPtr& opsErrCtx, IntPtr& opsSqlCtx, IntPtr& opsDacCtx, IntPtr opsSubscrCtx, Int32& isSubscrRegistered, Int32 bchgNTFNExcludeRowidInfo, Int32 bQueryBasedNTFNRegistration, Int64& query_id, OpoSqlValCtx*& pOpoSqlValCtx, String pCommandText, IntPtr& pUTF8CommandText, IntPtr[] pOpoPrmValCtx, String[] ppOpoPrmRefCtx, OpoMetValCtx*& pOpoMetValCtx, Int32 prmCnt, Int32 bFromPool) +0
Oracle.DataAccess.Client.OracleCommand.ExecuteNonQuery() +4731
App_frmTest.btnClick_Click(Object sender, EventArgs e) in d:\CWC\App\frmTest.aspx.cs:79
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +111
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +110
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +10
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +13
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +36
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1565

Hi;
Its better to ask it at visual studio forum site:http://social.msdn.microsoft.com/Forums/en-US/category/visualstudio
Regard
Helios

MFA Server unable to use RADIUS

Similar Messages

Maybe you are looking for