MFBF and Alternative Routing Sequence

Hi;
We are using REM in PP.We confirm via MFBF. And we create routings via ca01. I want to use alternative routing sequence during confirmation.
What should I do? or Is it possible for REM?
Thanks.

Hi;
Thanks for your answers. I dont want to create new production versions. But routing informations are change.
Ex: I have two machines in a production line, lets say it A and B. This line has a work center code in SAP ( lets says Line1)
When I use only machine A I produce 100 pieces in 5 minutes with 2 worker. But when I use A & B at the same time I produce 100 pieces in 3 minutes with 3 worker.
Machine A and B are connected to the same conveyor belt, so I put the pieces in the same palette. And during confirmation I use Line1 as workcenter.
What should I do to post the exact activities ?
Thanks for your information.

Similar Messages

Inbound Queue blocked: Parallel and alternative sequences are not supported

Hi,
Just now, I checked the Inbound Queue in SCM system through SMQ2 and found which was blocked by error message "Parallel and alternative sequences are not supported". Could you please tell me what does it mean? How to fix it?
Thanks,
Quanyin Su

Hi Quanyin Su,
Parallel and Alternative sequences are used in routing.
I believe you are trying to CIF PPM/PDS from ECC to APO and you are getting this queue stuck at inbound of APO.
Both the alternative and parallel sequences are supported in APO.
Alternative sequence is used as alternative modes in APO.
I can think of this as a master data issue.
At least one of your work center used in either of the sequences is not available in APO or is not APO relevant.
Could you please check your master data such as all the work centers used and make sure your parallel and alternative sequences are consistent.
Once you made sure that master is available in ECC, you can CIF it to APO by using CURTO_CREATE transaction in ECC.
Please see below link for Routing and its usage in APO:
http://help.sap.com/saphelp_apo/helpdata/en/99/ed3a981d0f11d5b3fc0050dadf0791/content.htm
You also need to activate a BADI in order to sent alternative sequences to APO.
Below thread has all the details regarding this.
Re: /SAPAPO/CURTO 103 : Mode .. is not assigned to an activity
Regards,
Abhay Kapase
Edited by: AbhayKapase on Aug 5, 2011 2:24 PM

BAPI For listing alternative routing with sequence details.

Dear all,
I want to use BAPI For listing alternative routing with sequence details.
Pl' tell BAPI function Module for routing .
Thanks.

I am not sure ,but check with BAPI_ROUTING_CREATE

Difference between routing and rate routing

frndz,
Pls tell me the difference routing and rate routing.
regards,
Srini

Dear ,
[Rate Routing:]
1.A routing for whose operations the production quantity and a fixed duration has been defined. Thus the production rate is also defined.
2.Rate routings are used when you plan on a quantity basis, for example in repetitive manufacturing.
3.A rate routing has the same structure as a routing. You can assign a rate routing to a material to be produced. It can have prallel sequences.
[Routing]
1.Routings are used directly in production orders for a material.
2.A routing can be used without restrictions. Some functions from other task list types such as rate routings and inspection plans are also available in routings.
3.As well as a standard sequence a routing can also have parallel and alternative sequences. You can assign a routing to a material to be produced.

Parallel routing / sequence

Hi Experts,
I have issue in routing as follows:
I have five operation in a routing as A,B,C,D,E. In every operation I have some component allocation.
Now operation B,C,D is a common operation but components to be allocated is different as per left side and right side of the product.
So How should I map these oerations B,C,D with different components allocation in a single routing.
Should I use parallel sequence or is there anything like parallel routing also. Please tell me the steps to create the routing with parallel sequences and parallel routing with effects of that after MRP run also.
Waiting for the valuable guidance.
Regards
Deepak Sharma

Hi,
In this case, for the operations B,C,D allocating components differently is not possible in the same routing. Because if the components are aligned to left or right as mentioned, there may be change in the product which in case has to be maintaned in different routings with different material numbers.
If not create routing for the same material with group counter 1 and 2, and create production versions and pick the desired ones after Production order creation.
Hope this gives you an idea...
-Thaila Shree

How to create parallel routing sequence

how to create parallel routing sequence?
we have routings 3010 ,3020 ,3030 and 3040.
but 3010,3020 and 3030 operationwise shop list to be released at one time becuse they all are parallel operations.
after 3010,3020 and 3030 operations 3040 is a sequencial operation.
please do explain the process how to create parallel routing sequence in this case
and confirmation of operations
thanking you
srinivas

Srinivas,
i think you are looking at an option were in you can confirm or do goods Issue for the order. If that was the requirement, then the control is in customizing transaction "OPK4".
Here in this transaction you need to define "operation sequence is not checked" for the plant/order type combination.
Hope this helps....Please let me know if your need is something else,
Regards,
Prasobh

Standard routing and rate routing

Hi All,
Can someone tell me what tables I should use to get the standard routing and rate routing for the query?
Thanks
Edward.

Dear,
Yes you are right.
The main difference between routing and rate routing is you can not create parallel sequence in rate routing CA21 only nothing else.
There are lot of different opinion on this topic but there is no too much difference in them only we use rate routing in REM and normal in Discrete manufacturing.
Also check this thread ,
Difference between routing and rate routing
Hope clear to you.
Regards,
R.Brahmankar

Routing and rate routing

Hi Gurus,
Please explain me the difference between Routing and rate routing in details
Thanks in advance
Rupesh

Hi,
Functionality of Routing and rate routing is similar.
Routing: It defines the sequence of operations that should be carried at a work center to make up a product.
Routing is one of task list in PP module to carry out the production of finished and semi finished parts. it consists operation sequence which requires for manufacture finsihed and semi finished parts like operation 10. 20, 30...
It is mostly used in Discrete Manufacturing
Rate Routing: A routing for whose operations the production quantity and a fixed duration has been defined. Thus the production rate is also defined.
Rate routings are used when you plan on a quantity basis, for example in repetitive manufacturing.
With regards
Ram Kumar

Alternative router settings to replace hh4

Hi all
I have recently purchased a Cisco rv220w router to replace my home hub 4. I have tried and tried but can't seem to get the router to receive an internet signal. I have used pppoe and changed the user name to that of my home hub.. I think one issue might be that my new router is asking me for a password and the hh4 doesn't have one?
Any one on here had any luck or can share some advice about using an alternative router? Would a call to bt help?
James

Just to confirm, are you on Infinity or adsl broadband. If on adsl broadband your new router does not have an adsl modem it is only a router and that would be the reason it won't work.
If you are on Infinity I presume you are connecting through the Openreach modem as your router does not have a VDSL modem built in and would not work with out the Openreach one.

Alternative resources and alternative modes with CTM

Hi everybody,
we are trying to figure out, whether CTM supports alternative resources and alternative modes.
Does anyone know if it is possible or has even implmented the functionality?
Thank you in advance for your help.
Best regards
Mitch

Hi Mitch,
It depends on what CTM profile you are using. 1) Bucket based or 2) Time continuous.
1) Bucket based : You will have to use SNP PDS and SNP PDS do not support alternative modes.
Alternative resources are not supported at all in SNP.
As an alternative, You can use the BAdi /SAPAPO/CURTO_SNP with CIF_IMPORT parameter to create multiple PDSes in case there is alternative resource in routing/recipe.
2) TIme continuous: You will use CTM PDS.
PPDS PDS supports alternative resources. I am entirely not sure about CTM PDS.
I will check out, if I can find out.
Which CTM profile you are using?

Alternative router to hh3

ok so the hh3 is an ok router for standard use BUT not ideal for advanced use, NAT loopback and dyndns being the main issues, so what is a good alternative router to use that does a proper routing job,
guess the main requirements are
it needs to support connection to infinity
needs to support dyndns
needs to allow NAT loop back
802.11n

A quick check of the TP Link forum for the TP-Link TL-WR1043ND seems to indicate that it does.
11-15-2012 04:33 #8
Taylor
Junior Member
Join Date
Sep 2012
Posts
4
I'm pretty sure TP-LINK wired routers support NAT Loopback, I have test it with my IP camera, it works.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Navigation App with alternative routes Lumia 1020

Has anyone found a good navigation app that will give an alternative route?
With my android phone I've used Google maps and Scout. I can't find one for the Windows phone.

Hi @ewand ,
There must be an option to make the Audi completely forget the phone, as well as removing the car from the list of known bluetooth devices on the phone, then start the pairing again. It is unclear from your previous post if this has been tried already? (Re-pairing can be interpreted in different ways).
I am puzzled why it would work on one phone and not the other similar phone.
Hans

Want to propose Alternative Route in Order

Hi friends,
I would like to know what configuration settings I should be doing for to propose Alternative Route in Order.
Condition is as below.
Rec Zone(X)Shipping Zone(Y)SH Cond(02)+ Trans Grp(0001) = Route( ABC) .Here I want to propose (popup) laternative routes.
Please reply soon.Waiting for your kind reply.

hello again.
also look into IMG > SD > Basic Functions > Routes > Route Determination > Maintain Route Determination.
if you are just defining a combination of departure zone and receiving zone, click 'New Entries'. if you are adding alternative routes, select a combination and click Route Determination without weight group. in the next screen, you can make your assignments based on Shipping conditions + Transport group + proposed route.
if weight group is relevant, then click on Route Determination with weight group. in the next screen, the weight group and actual (alternative) route can be assigned together with the transport group and shipping conditions.
regards.

Using Remote app on iPhone 5 without a separate internet connection and wifi router.

Hi,
I need to be able to control iTunes within my MacBook Pro remotely. Using my mobile broadband service and wireless router I've been able to get the Remote app to allow my iPhone 5 to do the job nicely through Home Share. So I went and bought a separate WiFi router and tried to do the same thing. Of course when it didn't work, I discovered that I need an internet connection and WiFi network to make the Home Sharing work.
So I got to thinking, can I create a WiFi hotspot using the Personal HotSpot functionality of my iPhone, set up Home Sharing on phone and MacBookPro and then use the Remote app. Ideally this would work as it seems all the key components are in place.
The MacBook Pro accepts the iPhone hotspot as a means of Home Sharing, however the iPhone won't use the personal hotspot to Home Share and I can't connect to the iPhone personal hotspot on the iPhone itself.
Does anyone know how to make this work for me? It would be such as neat solution if I can get it to work - not to mention the potential to save me about $200 (I need to set this model up for two people).
Cheers
Kathy

Same trouble here, iPad 2 with latest OS and remote app, iPod with latest OS and app.

VPN between ASA5505 Easy VPN Server and 881G Router as Easy VPN Client

Hello,
I have problem in VPN between ASA5505 Easy VPN Server and 881G Router as Easy VPN Client. ASA 5505 have 7.2.3 software and 881G router have 15.1 software.
881G is configured as hardware client in network exstention mode, and it is placed behind NAT. ASA5505 is working as server. Same VPN Group works correctly from VPN software clients.
When I send traffic from 881G client side, in show cryto sessin detail I see encrypted packets. But with same command I dont see decrypted packet on ASA5505 side. On both devices Phase 1 and Phase 2 are UP.
VPN is working when I replace ASA5505 with ASA5510 correctly with have 8.4.6 software. But problem is that i need to do this VPN between ASA5505 and 881G.
Can you help me, how can I debug or troubleshoot this problem ?
I am unable to update software on ASA5505 side.

Hello,
Hire is what my config look like:
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 set pfs
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 40 set pfs
crypto dynamic-map outside_dyn_map 40 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 60 set pfs
crypto dynamic-map outside_dyn_map 60 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 80 set pfs
crypto dynamic-map outside_dyn_map 80 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 100 set pfs
crypto dynamic-map outside_dyn_map 100 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 120 set pfs
crypto dynamic-map outside_dyn_map 120 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 140 set pfs
crypto dynamic-map outside_dyn_map 140 set transform-set ESP-AES-128-SHA
crypto dynamic-map outside_dyn_map 160 set pfs
crypto dynamic-map outside_dyn_map 160 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 180 set pfs
crypto dynamic-map outside_dyn_map 180 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 200 set pfs
crypto dynamic-map outside_dyn_map 200 set transform-set ESP-AES-256-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 1
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 2
authentication pre-share
encryption 3des
hash sha
group 1
lifetime 86400
crypto isakmp policy 3
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
tunnel-group HW-CLIENT-GROUPR type ipsec-ra
tunnel-group HW-CLIENT-GROUP general-attributes
address-pool HW-CLIENT-GROUP-POOL
default-group-policy HW-CLIENT-GROUP
tunnel-group HW-CLIENT-GROUP ipsec-attributes
pre-shared-key *******
group-policy HW-CLIENT-GROUP internal
group-policy HW-CLIENT-GROUP attributes
password-storage enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value cisco_splitTunnelAcl
nem enable

MFBF and Alternative Routing Sequence

Similar Messages

Maybe you are looking for