MFBF GR to Blocked stock with 103 MT Instead of 131

Hi Guru's
I want MFBF GR to blocked stock atomatic , with out using a Edit--> change detail settings-Blocked stock setting,
i tried with assigning 103 Mov tye in Rep mfg profile for GR but it is giving Below error,
I think it is FI ERROR
So i think Could antbody Help for this issues
Update control of movement type is incorrect (entry 103 X X _ F)
Message no. M7226
Diagnosis
The system could not find entry 103 X X _ F in any of the movement type control tables.
Procedure
Cancel current processing.
Contact your system administrator.
Action to be taken by the system administrator
Check in Customizing for Inventory Management under Copy, Change Movement Types whether the entry is contained in the Update control view for the movement type.
If the entry is missing, proceed as follows:
For standard movement types, this means that the given process is not supported using the present data combination. Do not create any entries without prior arrangement with your SAP consultant. Otherwise, incorrect postings may result.
For customer-defined movement types (beginning with 9, X, Y, or Z), this may mean that they have not been fully defined. Delete the movement type and re-create it by copying a standard movement type.
So could any body help in this regard with steps i will be greatefull to them.
Reg
Madhu

Hi Madhu,
You need to maintain settings in inventory management OMJJ transaction.
For mvt type 103 set the allowed transactions MFBF and maintain update control /WM mvt types setting
for 103 mvt and mvt indicator 'F'.
Discuss with MM and FI members before these changes.
Regards
Venugopal

Similar Messages

MFBF GR to Blocked stock

Hi Guru's
I want MFBF GR to blocked stock atomatic , with out using a Edit--> change detail settings-Blocked stock setting,
i tried with assigning 103 Mov tye in Rep mfg profile for GR but it is giving Below error,
Update control of movement type is incorrect (entry 103 X X _ F)
Message no. M7226
Diagnosis
The system could not find entry 103 X X _ F in any of the movement type control tables.
Procedure
Cancel current processing.
Contact your system administrator.
Action to be taken by the system administrator
Check in Customizing for Inventory Management under Copy, Change Movement Types whether the entry is contained in the Update control view for the movement type.
If the entry is missing, proceed as follows:
For standard movement types, this means that the given process is not supported using the present data combination. Do not create any entries without prior arrangement with your SAP consultant. Otherwise, incorrect postings may result.
For customer-defined movement types (beginning with 9, X, Y, or Z), this may mean that they have not been fully defined. Delete the movement type and re-create it by copying a standard movement type.
So could any body help in this regard.
Reg
Madhu

Hi Prasobh,
Its my client special req, when ever they wanted to do MFBF it should go to Blocked stock , reason is it will not be allocated to any customer without specific req, based on the customer requirement, the material will be moved to unrestricted stock with special labeling against the customer and customer label and code , with Testing,
i hope you understood this,
Thanks and Reg
Madhu

Consideration of GR Blocked Stock (mvt 103) for MRP.

Dear Expert,
My requirement is to consider GR blocked stock (mvt 103 non valuated stock) in MRP run. My Business process is goods received in plant through movement 103 and then regular GR ( mvt 105)
I do carry MRP run twice in the month.
Requesting you to provide me solution which will help me to consider GR blocked stock in MRP.

Hi,
In OVZ9, for the combination of avaibility check please select Check blocked stock Indicator determines whether blocked stock is included in the availability check.
Please try and come back.
Regards,
R.Brahmankar

Post serialized part from free to block stock with a follow up action

Hi,
I try to post a serialized part from free to block stock, but the standard function modules QMLR_FREE_TO_BLOCKED_STOCK, QMLR_FREE_TO_BLOCKED_STOCK_ST2 work good with not serialized parts, but it doesn't works with serialized one.
I create quality notification with serial number reference in RQM00-SERIALNR field, when I execute the follow-up function the M7175 error message appears.
Someone know a solution to this issue?
Thanks
Marianna

Hi The standard FM will not update the serial no for the material. So when you are doing the material movement through follow up action system can not move the material with out serial no. So you can change the functional module aith help of abaper to fetch the data from quality notification field.
Regards,
Smruti

Stock in MD04 is also considering Blocked stock with Unrestricted Use

Hi PP Gurus,
In MD04, the stock which the system is showing also considers Blocked Stock for Planning means stock= Unrestricted Use Stock + Blocked Stock.
We Dont want blocked stcok to be considered.
We are using 01 availabilty check with PP checking rule.
In OPPJ, the check box for Stock-Include Safety Stock is only Checked.
Can anyone Please explain why the system is considering blocked stock for Planning???
Thanks in advance,
Regards,
Rakesh Wade

Hi,
Pls check in OPPQ - Available stock tab - Blocked stock would have been activated and hence the system is considering the Blocked stock also.
This indicator when activated causes blocked stock to be included in the MRP calculation.
The indicator you enable in OPPJ will come into effect only when you carry out an avilability check.
Regards,
Sheik

Release GR blocked stock 105 from 103 twice

i received my stock to gr blocked stock 103 after that i want to release it partial with 105
i want to release one 103 document to many 105 document (fi famous problem account .problem is :line items which already released comes again is it possible when i release gr blocked stock with reference to material document to retrieve unreleased line items only?

Hi
At my end system gives error if I try to released material document which is al;ready released before.

Blocked Stock and Frlag material for Deletion

What is the diffrence between blocked stock and flagging material for deletion.
Thank you

Hi,
Difference between Block stock and flag material for deletion is:
Block stock will only come into picture if your client says that when ever they receive stock, before quality and physical check it should not create any accounting document..So what you will do is, you will receive stock as block stock with mvt 103...Once Check is done you will release your block stock with 104....
Say for an e.g. Vendor has supplied you goods in your premises...Same time you have noticed that goods are damaged o rare of poor quality...So you will post the stock as block stock...So once you post as a block stock, there won't be any accounting documents generated....
Material flad for deletion means: That particluar material can not be used for further procurement..E.g.. may be client has stopped using that material....
Hope it clears
Utsav

Inspection Lot Stock: Post to GR blocked stock

Hi Experts,
During the IQC process (inspection type 01), first I use the 103 to post the stock to GR Block stock (100 pcs), then after the Usage Decision, I post the stock 80 to unrestricted use stock, 20 remain in the GR blocked stock.
So, the 20 stay in the GR Blocked stock, and what can I deal with them? Manually create a inspection lot?

>
kiran kumar wrote:
> > Dear GR blocked stock is not plant's own stock.It's a non valuated stock and there are no accounting data for GR blocked stock and it is not possible to post GR blocked stock to QI.
>
> Release the GR blocked stock with 105 mvt type.
>
> Cheers
> KK
Dear KK,
The GR Blocked stock could be released to unrestricted stock by the 105 type while doing the usage decision.
However, in this occassion, this 20 is remained in the GR blocked stock by using the "GR blocked stock" field in the Inspection Lot Stock tab of the QA14.
Edited by: Veryhanhan on Dec 18, 2010 9:15 AM

Releasing GR Blocked Stock to any unrestricted storage location

We have some stocks in non-valuated GR blocked stock which was posted from Purchase Order with movement type 103
Now, the decision is to dispose the material. We have dedicated scrap location in system. Before disposing physically the material need to be cleared from system under GR blocked stock, even though it does not appear in any storage location in SAP
Our Material Planning suggested that stores shall post release of GR blocked stock with movement type 104 so it will reverse the 103 movement previously, and clear the qty from system. But this in my opinion is against control viewpoint..i.e. stores should not use this way to clear system assigned stock to clear from system
My suggestion was to use the following steps :
1. MIGO>> Release GR blocked stock
2. Put Material Document number (while posting 103), material details, qty, other references will be retrieved automatically
3. The movement type is seen to be default as 105, change it to 910 (Release GR blocked stock for warehouse)
4. Change Stock type from QM inspection to Unrestricted
5. Assign Storage location to desired one (in my case I assigned SCRAP location)
5. Select Item OK indicator to activate
6. Check & Post
Since the item has PO reference, my question to my expert friends is that will the above release from GR blocked stock post qty only to SCRP location or will it post Qty + value ?????
I don't want Value to be posted to the scrap location.
If the above process to move the stock qty (only) from GR Blocked stock to Scrap is success, I can ask accounts to post adjustment to clear scrap qty by 702 movement type.
Thanks, Sunil

Just set this que is complete so no one will try to open

How to identify the material's status within GR blocked stock

Hi Experts:
We have the goods receive for purchase order process is that all the goods from supplier reference to PO should be move to GR blocked stock first(103), and release to un-restricted stock after goods quality inspection(105).
Those quality is not accepted goods should be remained in the GR blocked stock for a long time and some of them will be returned to supplier and some of them will be finial accecpted to un-resticted stock after repair. My question is how can we seperate the material's status from normal goods receive within the GR blocked stock becasue our client want to analysis the GR blocked stock. or if possible those quantites can be move to our no-valued stock? or we can active the vendor batch to seperate? Would you please give me some advice on that?
thanks and best regards
Xincheng

HI Jin
GR blocked stock is treated as non valuated stock in the system because while posting the material doc with movement type 103 system does not create any accounting entries so those are non valuated stocks till you dont do 105.
As far as report is concerned you can pull the material documents created with movement type 103 in the system for an particular plant and date range this will solve your purpose using trasaction MB51.
As you are planning to go for vendor batch management I belive it will give further split up quantity within the GR block stock, Yes u should go for it.
Award if usefull
Regards
Sujoy
Edited by: SUJOY on Sep 23, 2008 6:16 AM

GR-blocked stock VS Blocked stock

Dear all,
I still have some confuse with the concept and use of GR-blocked stock and blocked stock.
As far as I know, GR-blocked stock is usually triggered at the point of goods receipt with ref to PO. If the goods are not satisfy with the requirement, then post the goods to GR-blocked stock via 103.
However, under what circumstances we need to post the goods to blocked stock?
Thanks in advance for the guidance.
Thanks.
Best Regards,
Edwin

Hi,
Good receipts is done in Unrestricted stock (or) Qualtiy Stock (or) BLOCKED stock
Movement type - 101 Unrestricted stock (or) Quality Stock
what circumstances we need to post the goods to blocked stock?
during inwarding if you found that the lot will having problem where the value is more and qty is more
you will inward in Blocked stock
Movement type -- 103 - For blocked stock in this you are moving to block stock if you see the P.O history of the p.o. there will be qty updation and value updation is not there
when u move from block stock to unrestricted stock using movement type 105
stock will be getting updated and valu also
You have totally confused
G.Ganesh Kumar

Blocked stock and GR Block stock

Can anyone please let me know the difference between Blocked stock and GR blocked stock. How to post stock to these both stock type and how valuation matters to those.
Also for transfer posting from Stock type Blocked Stock to Quality Inspection Stock or Unrestricted-use Stock, whether accounting document will generate or not....
Please clarify me on this.
Thank you
Shreek

Can anyone please let me know the difference between Blocked stock and GR blocked stock. How to post stock to these both stock type and how valuation matters to those.
GR Blocked stocks means if you have doubt about the stock you can post these stocks to GR Blocked stock with mvt type 103.In this case no accounting documents generated.Once you gets clarified the doubt about stock you can move the stock to your stock with mvt 105.Once you post the document with 105 you can get accounting documents will be generated.
Also for transfer posting from Stock type Blocked Stock to Quality Inspection Stock or Unrestricted-use Stock, whether accounting document will generate or not...
Blocked stock is you are blocked these stocks for other movements This stock you can transfer mvt 343 & 344 blocked to unrestricted or unrestricted to block.In this cas you are moving the stocks with in storage location in single plant so thesre is no accounting generated.only stock status changed..
Hope this will clarifies,
JS

Which table is GR Blocked Stock saved in ?

hi:
when i do gr with movement type 107, can anyone tell me which table is GR Blocked Stock saved in ?
thanks in advance..
Monson

if i do gr with 107, then you can see the GR Blocked Stock with MMBE, I want to know which table is GR Blocked Stock saved in , not material document. thanks ..if there is no directly table, can anyone tell me how to calculate it ?

Return consignment stock to blocked stock

Hi All,
I want to be able to return consignment stock through sd (pick up)directly to blocked stock .
Movement type 632 is now used to transfer consignment stock to own unrestricted.
What can i do ? is it possible to put material in block stock with movement type 632
In MM02, I enter the material code for which I am creating consignment pick up and selected "Quality Management" view. & assign inspection type 06- Inspection for Returns from Customer
& marked post to insp stock.

Hi
Option 1
For your consignment pick up schedule line category F0 or F1 the standard movement type is 632
only
You are not adviced to tamper the standard settings
With 632 movement type stocks will be in own unrestricted
You can move them to QI inspection in t code MB1B with movement type 322 which should be he correct process
Option 2
But if the business demands then in your schedule line category F0 or F1 change the movement type to either
655---goes to QI inspection straight away (you can move them back to unrestricted t code MB1B with movement type 321)
or
657----blocked stocks (you can move them back to unrestricted t code MB1B with movement type 343)
But avoid option 2
Regards
Raja

GR blocked stock in MRP

Hi,
Is it possible to consider GR blocked stock in MRP?
Our client requirement that system should consider GR Blocked Stock (Mvmt 103) also in MRP calculation such that GR blocked stock also to be considered as stock available.
Thanks
Prasad

Hi,
I hope, GR blocked stock will be considered as open PO's since it is non valuated. Kindly check one cycle.
Regards,
Prabu

MFBF GR to Blocked stock with 103 MT Instead of 131

Similar Messages

Maybe you are looking for