MFD & Expiry Dates

Hi All,
Does the MFG & Expiry date will refelect in the process order when its in release status.
Regards,
Mallika

Hi,
Releasing the process order means allowing to proceed further for production.
In normal scenario, as production is not completed yet because confirmation and final goods receipts not done hence manufacturing date is not fixed as well as expiry date also.
If your finish good is batch managed then in this case until you do final goods receipt, batch not created hence MFD and Expiry date not triggered.
So, in normal scenario MFG & Expiry date does not reflect in the process order when its in release status.
But if you are using automatic batch determination then it is possible to reflect MFD and Expiry date for batch in process order release status.
You can go through below SCN discussions to verify the same,
Production order released (CO02)
Batch for production order when released
Automatic Batch Determination in Production order
Regards,
Narresh

Similar Messages

Report for expiry date of the material

All SAP Gurus,
We have certain Materials which are expirable.
These Materials are batch managed, and each batch is having different expiry date.
Is there any standard report available which can give is the days remaining to reach the expiry date (for that material)?
Regards,

Hi,
Try MB5M,
here
Field name                                Field value
Material                                Enter the material code to which the report is desired.
Plant                                Enter the plant in which the report is to be generated.
Storage Location                     Enter the storage location in which the report is to be generated. Optional entry. Leave it blank.
Batch                                 Batch number to be displayed. Optional entry. Leave it blank.
Remaining shelf life           Minimum amount of time for which the material must keep upon goods receipt for the goods receipt to be accepted by the system. Optional entry.
Remaining shelf life warehouse     Indicates that the remaining shelf life of a batch in
Total remaining shelf life         Indicates that the system displays the total remaining shelf life of a batch.
The total remaining shelf life is calculated from the shelf life
Expiration date minus the current date. Select this radio button.
     Indicates that the system also displays materials with zero stock. Optional, leave it blank.
     Display of remaining shelf life in days. Select this radio button to display the remaining shelf in days in the report.
Regards,
Pardeep Malik

Report with expiry date.

In MB51, I cannot find the expiry date for the batch.
Is there any report where I can find list of batch with PO and also the expiry date?
Please advice.

HI,
MB5M is the perfect report as suggested by jurgen.The criteria is, in Material master the plant data
storage view u have give the shelf life.It will work perfectly.Pl try.Give shelf life as one for the
material .Goto MSC2N and change the manfactured as 17/06/09 and press enter .The expiration date
will be calculated automatically by the system.Now goto MB5M the system will dislay the shelf life
expiration date.
Is there any report where I can find list of batch with PO-For this u can use MB51 report
regards
murugan
Edited by: Murugan mgl on Jun 19, 2009 6:16 AM

How to set expiry date for a mail account?

Hi there, i'm new in Messaging Server, need help here on how to set an expiry date to a specific mail user since the mail user will be just a temporary mail user. Instead of deleting manually, is there any smarter way of doing it?

Directory Server can be set to exipre a password, indeed. That will prevent the user from logging in, when it happens. There will be no warning, or anything like that.
The account will still be on the server, and the mailbox will still contain mail. It will still receive mail.
If you want to turn an account off, you will have to make some arrangement outside Messaging Server for automating it.
You can use any kind of program you like to set the ldap attribute "mailuserstatus" to "inactive", or even "deleted" as you wish.
You can use java, "c", or any other programming tools you like. Messaging Server and Directory Server aren't written in Java, anyway.

Item Expiry Dates in a View ?

I would like to write a query to show items that have an expiry date or number of days until expiry set, is there a secured view that can be used or do I need to access the underlying table directly ?
The wwv_things table gives me the expiredate, expirenumber, expiremode. The content area view (wwsbr_all_items) only has the expiredate so doesn't show any items that are set to expire say 5 days in the future.
Is there a different view that shows this or should I just run the query off wwv_things ?

Simon,
You would need the expirenumber and expiremode columns from the wwv_things table to achieve this. Expiremode, a varchar2 column, can contain the literal 'PERMANENT', 'DATE', or 'NUMBER'. WWSBR_ALL_ITEMS view currrently does not expose these columns. If you have access to the source, add these 2 columns to the view creation script. If not use the view script given below to recreate the view:
PROMPT Creating View 'WWSBR_ALL_ITEMS'
CREATE OR REPLACE VIEW WWSBR_ALL_ITEMS AS
SELECT t.masterthingid masterid,
t.id,
t.siteid caid,
t.language,
t.iscurrentversion is_current_version,
t.cornerid folder_id,
t.regionid folder_region_id,
t.name,
t.title display_name,
t.itemtype,
t.type,
t.subtype,
t.parentid parent_item_id,
t.topicid category_id,
t.topicsiteid category_caid,
t.author,
t.description,
t.publishdate publish_date,
t.expiremode expire_mode,
t.expiredate expire_date,
t.expirenumber expire_number,
t.image,
t.keywords,
u.url url,
t.filename,
tx.text text,
t.cornerlinkid folder_link_id,
t.cornerlinksiteid folder_link_caid,
t.active,
t.checkable can_be_checkedout,
t.checkedout is_item_checkedout,
t.checker checker_username,
t.checkoutdate checkout_date,
t.fullscreen,
t.inplace,
t.hideinbrowse,
t.createdate,
t.creator,
t.updatedate,
t.updator,
t.seq,
t.author_seq,
t.createdate_seq,
t.itemtype_seq
FROM WWV_THINGS T,
WWSBR_URL$ U,
WWV_TEXT TX
WHERE t.url = u.url(+) and
t.siteid = u.object_siteid(+) and
t.textid = tx.id(+) and
t.siteid = tx.siteid(+) and
( EXISTS
-- site and style admin
SELECT 'x'
FROM WWSEC_SYS_PRIV$
WHERE OBJECT_TYPE_NAME = 'SITE'
AND NAME = TO_CHAR(T.SITEID)
AND OWNER = wwctx_api.get_product_schema
AND GRANTEE_TYPE = 'USER'
AND GRANTEE_USER_ID = wwctx_api.get_user_id
AND GRANTEE_GROUP_ID = 0
AND PRIVILEGE_CODE > 100 -- SITE and STYLE ADMIN
UNION ALL
SELECT 'x'
FROM WWSEC_SYS_PRIV$ P, WWSEC_FLAT$ F
WHERE P.OBJECT_TYPE_NAME = 'SITE'
AND P.NAME = TO_CHAR(T.SITEID)
AND P.OWNER = wwctx_api.get_product_schema
AND P.GRANTEE_TYPE = 'GROUP'
AND P.GRANTEE_USER_ID = 0
AND P.GRANTEE_GROUP_ID = F.GROUP_ID
AND P.PRIVILEGE_CODE > 100 -- SITE and STYLE ADMIN
AND F.PERSON_ID = wwctx_api.get_user_id
OR
-- portal admin
EXISTS
SELECT 'x'
FROM WWSEC_SYS_PRIV$
WHERE OBJECT_TYPE_NAME = 'ANY_SITE'
AND NAME = 'ALL_OBJECTS'
AND OWNER = wwctx_api.get_product_schema
AND GRANTEE_TYPE = 'USER'
AND GRANTEE_USER_ID = wwctx_api.get_user_id
AND GRANTEE_GROUP_ID = 0
AND PRIVILEGE_CODE = 500 -- ADMIN
UNION ALL
SELECT 'x'
FROM WWSEC_SYS_PRIV$ P, WWSEC_FLAT$ F
WHERE P.OBJECT_TYPE_NAME = 'ANY_SITE'
AND P.NAME = 'ALL_OBJECTS'
AND P.OWNER = wwctx_api.get_product_schema
AND P.GRANTEE_TYPE = 'GROUP'
AND P.GRANTEE_USER_ID = 0
AND P.GRANTEE_GROUP_ID = F.GROUP_ID
AND P.PRIVILEGE_CODE = 500 -- ADMIN
AND F.PERSON_ID = wwctx_api.get_user_id
OR
-- folder owner
( EXISTS (SELECT 'X'
FROM WWV_USER_OWNED_CORNERS
WHERE SITEID = T.SITEID
AND ID = T.CORNERID)
OR
-- view folder w/no ILS
( EXISTS (SELECT 'X'
FROM WWV_USER_CORNERS
WHERE SITEID = T.SITEID
AND ID = T.CORNERID
AND HAVEITEMSECURITY = 0)
OR
-- view folder or item w/ILS
EXISTS (SELECT 'X'
FROM WWV_USER_CORNERS C
WHERE C.SITEID = T.SITEID
AND C.ID = T.CORNERID
AND ((HAVEITEMSECURITY = 0) OR
(HAVEITEMSECURITY = 0 AND
T.SECURITY = 'folder') OR
(HAVEITEMSECURITY = 1 AND
T.SECURITY = 'item' AND
EXISTS
(SELECT 'X'
FROM WWSEC_SYS_PRIV$ D,
WWSEC_FLAT$ F
WHERE F.PERSON_ID =
WWCTX_API.GET_USER_ID()
AND D.OBJECT_TYPE_NAME = 'ITEM'
AND D.NAME =
T.SITEID| |'/'| |T.MASTERTHINGID
AND D.OWNER =
WWCTX_API.GET_PRODUCT_SCHEMA
AND D.GRANTEE_TYPE = 'GROUP'
AND D.GRANTEE_GROUP_ID = F.GROUP_ID
AND D.GRANTEE_USER_ID = 0
UNION ALL
SELECT 'X'
FROM WWSEC_SYS_PRIV$ D
WHERE D.OBJECT_TYPE_NAME = 'ITEM'
AND D.NAME =
T.SITEID| |'/'| |T.MASTERTHINGID
AND D.OWNER =
WWCTX_API.GET_PRODUCT_SCHEMA
AND D.GRANTEE_T YPE = 'USER'
AND D.GRANTEE_USER_ID IN
(WWCTX_API.GET_USER_ID(),2)
PROMPT Creating View 'WWSBR_ITEM_PERSPECTIVES'
CREATE OR REPLACE VIEW WWSBR_ITEM_PERSPECTIVES AS
SELECT tp.siteid item_caid,
tp.masterthingid item_masterid,
tp.perspectiveid perspective_id,
tp.perspective_siteid perspective_caid,
p.name perspective_name
from wwv_thingsperspectives tp,
wwv_perspectives p
where p.siteid = tp.perspective_siteid
and p.id = tp.perspectiveid
and exists (select 1
from wwsbr_all_items i
where i.masterid = tp.masterthingid
and i.caid = tp.siteid)
null

GTC Upload in OIM 9.1.0.2.How to capture User Expiry Date

Hi,
There are two OOB fields on User form.User account Expiry Date and User account Expiry Warning date.I have made these fields hidden.I found a strange thing happening.When I create a user manually,these two fields have a date value populated automatically,but if I perform bulk Upload,there two fields are blank.
Please help.
Regards,
Shubhra

Hi srini,
thanks for your reply,
Actually we integrated with 2003 exchange server, and we need a new integration with exchange server 2010.
we don't want to disturb 2003.
We are confusing with connector versions and how to perform those things.
Thnaks,
Valli

Report of expiry dates for framework purchase orders

Hi,
In Standard SAP is there any report of expiry dates for framework purchase orders?
Thanks & Br,
Sandeep

Hi
There is no standard report available to display the expiry dates for frame work orders.You can get the details from table EKKO and field is KDATE or U have to go for development.
regards
Ramakrishna

How to automatically update the Expiry Date's number of days

My web app input form is an event submission form. Users enter the event title, event date and other details, etc. I've figured out how to get the "expiry days" in the form and it be hidden but i can't figure out how to calculate this:
(today's date) - (event date) + 1 day = number of days to expire and then set the expiry days to that value upon submission.
I have tried writing the js but am getting no where, has anyone out there already accomplished this? I've researched and researched and find a million things on calculating the number of days but can't get one of them to work for my situation here... any help would be greatly appreciated!!

Hi Murtuza,
You can use function module BAPI_ISUACCOUNT_CHANGE.
Pass dunning lock details in parameter TCTRACLOCKDETAIL. This function module only create and delete locks.
So, you need to pass existing lock details (from table DFKKLOCKS) with PROCESSING_MODE = 04 (delete) and append another value with changed expiry date with PROCESSING_MODE = 01 (Create).
This will also help in maintain lock history too.
Hope this helps.
Regards,
Avinash

Adding an Expiry date to a document - Acrobat Pro

I want to add an expiry date to my document i.e 12 months from when it was created. I recently got Acrobat Pro X on my computer, and the not sure how to do this now. Any help would be greatly appreciated.
In Adobe Acrobat 8, it was possible by adding JavaScript by clicking on the menu Advanced > Document Javascript > Edit CheckDoc
Then we could open the JavaScript and put the end date, as below
Thanks!

Adobe LiveCycle can protect documents on an internal company network OR via the public Internet, it simply depends on how you set up access to the LC server (i.e. is the IP address of the server public and can it be connected to from outside the firewall).
"Expiring" documents with JavaScript is strongly discouraged if the document has value, as a user can trivially bypass the script (and as you have found out, it only ever runs under specific circumstances). If the PDF is opened in a non-Adobe application such as OS X Preview, scripting simply isn't available. Many users disable the scripting module by default, especially in enterprise settings. These are the situations for which digital rights management (DRM) was developed - if there was an easier (and cheaper) way to do it, Adobe wouldn't have bothered writing LiveCycle's DRM module as they'd never sell any licenses!
LiveCycle DRM restricts the PDF to opening only in Adobe applications (Reader and Acrobat), but the protection offered is totally reliable. Nobody has ever bypassed or cracked LCDRM hashes in the wild, and it's used to secure documents of the highest value (both commercial and proprietary). Yes, LCDRM is expensive and probably isn't viable for prosumer or short-run applications, but at an enterprise level the cost of a LiveCycle seat is often trivial compared to the losses they risk if a document falls into the wrong hands. It's a commercial decision, but anything less than DRM is merely an illusion of protection, and document authors must be aware of that.
I have exactly the same issue as you, except that the pdf documents are
distributed to customers - eg. quotations to expire after 30 days,
proposals, etc. In this case, Adobe Lifecycle doesn't work for me as it
only manages internal documents (as far as I know).

Problem in setting user end date from oim to account expiry date in AD process form

Hi all,
i am updating the user end date from oim to user account expiry date in ad process form using oim api.
i am able to get the end date value from oim but when i am setting it using api it through exception but all other attribute i am able to update in process form.
i am facing the problem only with end date field because of different date format in OIM and AD .
so please suggest me what are date format in Active Directory and how can i change the oim date format to Active directory time format in in my java code.

Thanks for the reply.
But all iplanet users need not contain end date attribute, and its an update on existing user.
Can you please ellaborate more on Transformation class..?? example should be helpful.

Set Disable or Expiry Date for web app item via Edit form

I have a user that wants to delete a web app item from a secure zone edit form, but they are not the owner of that web app item. All items in the web app were imported via a csv file and hence do not have a 'submitted by' user id assigned.
Is it possible to Disable a web app item using a web app Edit form? or alternatively, is it possible to set the Expiry Date of a web app item using a web app Edit form?
Thanks
Dave

Sorry Brian, but I'm not sure that answers my question.
Sure, I can create a single web app item for every single client of my customer, manually.
Sure, I can create and 'allocate' that single web app item to each customer manually.
I pray the customer doesn't have hundreds of clients. And I would have to teach my customer how to do this convoluted process for every new client.
But the one thing this doesn't do is answer the question of updating the value of units held.
It seems the order module remains the closes to what I am looking for in that it allows an equation, and is automatically customer specific.
However, I am looking for a way to achieve a single daily update by the customer as to the value of the units held by each client. This can be done via the product module - update price. But this does not update existing orders. Exisitng orders are fixed at the price on the day. The customer wants to update the value once, in one place, and have that amend all existing 'orders' to reflect the new total value of units held by each individual client, and to have this show in each client's member area.
If you can think of a way of doing this in webapps or via the order module, this is what I am looking for. Anyone?

Workflow to send mail 20 day before the expiry date

Dear All,
I created a workflow to send mail when a calculated column date is equal to today as follows:-
Step1
add -20 days to Current Item:Expiry Date (Output to Variable : date)
then set variable : Notification1 to Variable : date
Step2
If variable:notification1 equals (ignoring time) Today
email users
Now when i add a new item to the list , the workflow status is set to In progress , and when i refresh the page the status is changed to Completed before the condition is met and!!
Any help
Regards

If I Understood your question correctly, you need to send email to user 20 days before expiration date.
From above you workflow I can see, you are just checking your condition once a item is created. As your Step2 condition is not met your workflow is completed without any error. I suggest you might want to try below workflow
Step1
add -20 days to Current Item:Expiry Date (Output to Variable : date)
then set variable : Notification1 to Variable : date
then Pause until Variable:date
Step2
email users
Above workflow design will pause you workflow till 20 days before expiry date. and then send email to user.
Please ignore syntax, I just tried to put logic.
Below is explantion on how to use Pause Action(from MSDN) in Sharepoint workflow
This action is initially displayed in a workflow step as Pause until this time.
Use this action to pause the workflow until a particular date. You can add a current date, a specific date, or a lookup.
Following are examples of what the action might look like in a workflow step,
Pause until 1/1/2010 12:00:00 AM
Pause until Variable: A week from Modified
If this helps Please mark it answer or vote as helpful.
Thanks
Siddharth

My iphone has expiry date of 27 january 2015 .. plz tell me will it be covered under warranty on 27 jan or not??

my iphone has expiry date of 27 january 2015 .. plz tell me will it be covered under warranty on 27 jan or not??

Go to https://selfsolve.apple.com/. What does it is say the last day of your coverage?

Same Batch with different expiry dates

Dear all,
My vendor produced the same batch Y28 at an interval of 3 days eg 10/10/2008 , 11/10/2008, 12/10/2008 with an expiry date of 1year.
He sent in the batch Y28 to me with the following expiry date 10/10/2009, 11/10/2009 and 12/10/2009.
During GR, I need to enter the expiry date. However, I realised that the Batch Master for the same batch can only have 1 expiry date. I end up with the latest expiry date of 12/10/2009.
Could anyone advise on how the above scenario sould be handled?
Can I maintain 3 different expiry date for the same batch?
Is it a norm that the same batch can have different expiry date?
Thank you

You should create a separate batch per day, if you really think that the exact date of expiry matters for a material that has a shelf life of one year.

No mention of contract expiry date on bill?

I realise that when you enter into a new contract with BT you receive written details of start date, services etc.
When logging in to My BT and viewing current balance, phone, broadband etc, I cannot see any reference to the contract period.
Viewing my latest bill lists various services and charges along with any discounts etc. but again I can't see any reference to contract length or expiry date.
Perhaps I'm missing a link somewhere? Woud appreciate advice.
I know that I could always dig out the original contract confirmation letter but it's normally buried at the bottom of a drawer somewhere. I assume BT has to send you a letter of confirmation for legal reasons but I thought the idea was to go paper free!
Unless I AM missing something I fail to see why the contracted period is not clearly shown on my bill.
Solved!
Go to Solution.

Try this direct link https://bt.custhelp.com/app/chat/contact_chat/queue_id/275/c/2902
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

MFD & Expiry Dates

Similar Messages

Maybe you are looking for