MFE Exchange 2003 - manual sync ok but push gives ...

Hi
I have a nokia E61 connecting to a MS SBS server 2003 R2 server and if I set the e61 to maula synce every 15 mins it works fine but if I set it to always on so that it uses the MS push mail then I get an error on the phone and it does not sync. The error is:
"unable to connect. retr..."
Please can anyone advise how I can troubleshoot this issue, I know the problem relates to my server install becuase I can get the phone to sync to a different server.
The only difference is that the server that it won't work with is behind an external NAT router as the ADSL service is only a single IP address. Other than this I can't see any other differences.

Did you get a response to this post?  I am having the same problem...

Similar Messages

  • E71 MfE - Exchange 2003

    Hey all..
    First of all I want you to know I'm new to the whole server / mobile thing.. So please forgive if I need a little extra explaining.
    Right, I have an E71 that i'm trying to connect to exchange 2003 r2, I've got the server setup for web access on https://company.dyndns.org/exchange. I can browse to this address no problem via the phones browser.
    When I setup MfE and try connecting it says it connected for round 2 minutes, then it pops up with a box stating ' Error in Exchange, Try again later. '. When I try changing the username / password it gives me ' Credentials Error', this makes me think I'm getting to the server, but it won't authenticate the phone.
    Do I need to put a certificate on the phone?
    If so how?
    I tried installing the Certificate Authority and creating a certificate, but did not **bleep** right.
    Please help..

    Did you get a response to this post?  I am having the same problem...

  • IPhone Sync with Exchange 2003 not syncing calendar

    Hi all,
    Hopefully someone can help me here. I have a couple of iPhone 3GS' which have been set up to work with an Exchange 2003 server. We can get email & contacts to sync but calendar will not. Any ideas?
    Ants.

    Potentially calendar corruption.

  • Exchange 2003 email sync

    Hello everybody, how can I sync my Office email (server exchange 2003) with my Mac air. And the calendar too. Witch is the best email software should I use. Many tanks for your support.

    Hi mehrardt,
    It does sound like the exchange email account has to be removed from the iPhone and then added again.
    If he has another personal email account on the iPhone, you can have him delete the exchange account and then tap a configuration profile that you emailed him.
    The iPhone Configuration Utility available here: http://www.apple.com/support/iphone/enterprise/ will let you create a configuration profile with certificates, which you can email. The receiver would just tap the profile and it would configure the iPhone.
    -Jason

  • Exchange 2003 Active Sync - Contacts not showing up on BB10

    Hi Everyone, i am hoping someone can help.  We have been assumig all along the problem was with our Exchange Server 2003 config and new informaiton has come to light that makes me believe now it is a device issue and I am hoping someone has seen this problem.
    The core probllem is that contacts are not syncing propertly.  They are syncing VERY slowly - it has been 7 Hours and only a hundred or so have moves over.  The assumption was they werent copyng over, however new information has led us to potentially believe they are coming over but are being processed by the Z10 and not showing up in the contact list. 
    My unit is hooked up to my car on bluetooth and everytime i start my car - it copies over my contact list.  I then noticed that there are contacts which have been copies over, which do NOT show up yet on my blackberry (but are in my exchange contacts) - so my car found the contact from the Z10 and now 3 hours later, that contact is still not in my BB Contacts.  I know for sure that contact wasnt cahced in my car memory, as it is a new contact i created on my office computer only a few hours prior....
    This is making me believe that the Z10 is processing the contacts in some way or the index on my BB contacts is bad.
    What have I dont todate to resolve the issue:
    - complete wipe and reload (3 times)
    Today:
    Removed the battery and restarted - numberous times
    Interestingly, everytme i reboot the device, more contacts appear in my list???  Considering i have approx 800 contacts, this would only mean i have about 500 reboots left before my contacts are all there?
    HELP

    Hi Jjang,
    To resolve this for you it would really help if we could gather logs and do some testing. Could you please ask your wireless service provider to open a case with BlackBerry on your behalf so we can look after this for you?
    Thanks.
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • E72, MfE & Exchange 2003

    I've been using MfE in it's installable versions for a couple of years now, on various devices.
    We've just moved over to E72's at work from WinMo devices and we use a SBS 2003 SP2 Exchange box.
    Normally, and this applies to all other devices (WinMo, E71, E63 & N95 with MfE) when an email is opened, only the first 2KB is downloaded. Scrolling to the bottom of the message will force it to download the rest of the email. this works fine for the above devices.
    However, with the E72's embedded MfE application, I am faced with a "Fetching Content---" notification, followed by a pop up that says:
    "Mail For Exchange
    Security Policy that allows downloading HTML messages is disabled"
    The Exchange installation on SBS2003, doesn't support HTML for OMA, so I don't know where the error is coming from, is it within the E72?  Did I miss a setting somewhere?
    Does anyone know a work around for this as at the moment, I have 8 devices that work fine for the first 2KB of an email, anything after that is stuck in the ether!
    Regards Jon.
    If this post helped you, please press the Kudos button ;-)

    demonas wrote:
    I have the same problem on Nokia E75. It begin after software update for last version 201.12.01
    I can also confirm this. Everything worked fine with E75 firmware version 110.48.125 but when I upgraded to latest 201.12.01 firmware I'm unable to read any mail. Just getting the "Security Policy that allows downloading HTML messages is disabled" error message. I think in this version the e-mail client was upgraded to the same version as E72.
    Now I would have switched to iPhone (where the Exchange client have been working always perfectly) long time ago but I can't because I need to ensure that our users that are using Nokia are ok.
    This is a complete nightmare. Not the first Nokia MfE problem and I'm afraid not the last. Nokia is marketing these phones as e-mail/business models. I'm ashamed to be Finnish.

  • I can't sync my downloaded digital copies of Star Trek into darkness and captain america to my iPod touch 5th generation? I manually sync everything but it will not transfer at all! I have 64 gb. Help!!!

    I downloaded and synced Sherlock Holmes and start trek 3009 just fine on my iPod touch 2nd generation before years back. I manually download and sync all my stuff. But iTunes won't let me click and drop and then sync any of my downloaded digital copies to my iPod touch 5th generation. Help please

    Do they play in iTunes on the computer?

  • E71 Exchange 2003 Calender sync issue

    Hi guys,
    one of my colleagues has a e71 and want's to sync his mailbox with MFE 3.0.
    Everything is getting synchronized, except for the exchange calendar. Unfortunately no entry is getting synchronised from Exchange. The strange thing is, that two other colleagues have excatly the same mobile phone with the same software level.
    Does anyone have had the same strange behaviour?
    Any kind of information regarding this issue is very much appreciated
    kind regards
    Gottfried

    Hi deep9,
    thanks for your posting.
    So this problem is already well known or did i miss something here?
    Can you tell me if there is already a fix for this?
    Thank you!

  • Manually sync videos but auto sync music?

    Anyone know how to do this? When I uncheck the "sync videos" command on ipod preferences, it erases all my videos from my ipod and won't let me manually drag the ones I want onto it.
    If I check the "manually manage music and videos" button, it also unsyncs my music, and when I try to click the "sync music" button, it deletes all my manually added videos...
    Any ideas? Videos take up lots of space on my comp, so I would like to put them on my ipod and delete them from itunes so they use up less space, but I would like my music to continue automatically updating...all help appreciated!
    Thanks!

    I'm sorry, I guess I didn't fully understand your sync/delete method for videos. I'm not sure I know of a way to work around this dilemma short of manually updating your iPod.
    If you have to resort to manually managing your files, you could resort to the "playlist" update option:
    Try creating playlist(s) and syncing only those playlists.
    Select the iPod in iTunes. Click the Music tab.
    Tick Sync music and Selected playlists.
    Tick the playlists you want on the iPod.
    Then just Add/Delete from those playlists and plug in the iPod.
    When you add a video and delete it from your library things won't get erased this way.

  • Manual sync in multiclip

    Short version: with a multiclip in angle editor, I'm trying to manually sync a clip, that has to be moved in front of another clip in the same track (both clips are shot with same camera). When I move one clip in front of the other, the already synced clip gets moved out of sync. How do I lock the synced clips and manually sync other clips?
    Longer version:
    I used Pluraleyes to create a multicam clip with 3 cameras and a separate audio recorder. Most of the clips were synced, but there are a couple clips that didn't get synced. Now I'm in angle editor, and want to manually sync the clips that didn't make it.
    One camera stopped, so there are 2 clips from that camera. Pluraleyes wasn't able to sync the first of those two, and it left that second clip at the end. Both clips are in the same track. There's a clap at the beginning, so I just need to move that second clip before the first one. The problem is, when I move the clip in front of the other one, the synced clip gets pushed forward. How can I lock the synced clips?
    Here's a screenshot. All showing is synced, except clips on far right. I want to move that clip on the right, top track, in front of the other clip on the top track, but when I do so, the synced clip gets pushed to the right, out of sync.
    ETA: I just realized I can add an angle, and drag that unsycned clip to the new angle to manually sync. But I wonder if there's a way to what I was trying to do so I can stick with one angle for that camera.

    OK, I'm sure I'm doing something stupid, but when I try to slide the clip into sync on the new angle, it keeps snapping back--I can't move it one way or the other. I have unchecked snapping.

  • Removing old exchange 2003 routing groups from Exchange 2010.

    I have migrated over to Exchange 2010(server2008) from Exchange 2003(SBS2003). I've also already run the uninstall for exchange 2003 on the old SBS 2003 server. The old server itself is still running but exchange has been removed and once I get this fixed
    I plan to fully remove the old SBS server.
    I now get event ID 5020 and 5006 throughout the day on the new server. From what I've read, this happens because the old routing group connectors still exist.
    If I run Get-ExchangeServer I get
    Name                Site                 ServerRole  Edition     AdminDisplayVersion
    SERVER                                   None       
    Standard    Version 6.5 (Bui...
    SERVER2008          hr.local/Configur... Mailbox,... Standard    Version 14.0 (Bu...
    Am I correct in assuming that the way to fix this now is to go into ADSI edit and delete records under CN=First Administrative Groups? As in delete CN=Routing Groups and CN=Servers and everything under both of those? I'd try this myself but I'm not aware
    of any way to restore those records easily if I'm wrong.
    Event ID 5006
    Cannot find route to Mailbox Server CN=SERVER,CN=Servers,CN=first administrative group,CN=Administrative Groups,CN=HR,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=hr,DC=local for store CN=Public Folder Store (SERVER),CN=First Storage Group,CN=InformationStore,CN=SERVER,CN=Servers,CN=first
    administrative group,CN=Administrative Groups,CN=HR,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=hr,DC=local in routing tables with timestamp 27/09/2014 1:57:43 PM. Recipients will not be routed to this store.
    Event ID 5020The topology doesn't contain a route to Exchange 2000 Server or Exchange Server 2003 server.hr.local in Routing Group CN=first routing group,CN=Routing Groups,CN=first administrative group,CN=Administrative
    Groups,CN=HR,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=hr,DC=local in routing tables with the timestamp 27/09/2014 1:57:43 PM.

    Get-RoutingGroupConnector shows nothing. As for the servers group. It has the old server under it as shown in the image I posted above. That's actually what stops me from just deleting it because other guides have said not to delete it if an old server
    is listed.
    Is the SBS2003 server listed because I haven't ran DCPROMO to remove it from the network yet? I am planning to do this but was waiting till I cleaned up all the errors before transferring the 5 FMSO roles and running DCPROMO on the old server.
    DCPROMO isn't related to this, no.
    So you removed Exchange already? How? With setup? It should have removed the Exchange Server object then.
    It is supported to remove Exchange 2003 manually if required with adsiedit:
    http://support2.microsoft.com/kb/833396
    Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

  • Problems w/ Syncing Palm 755p to Exchange 2003 Server - HELP PLEASE - Sprint

    Hi, I used to be able to sync but now I can't (nothing has changed on our server).  Only thing different I can think of is I got an updater icon "EAS Updater" and I clicked it and now my Exchange Email stopped syncing to my palm (on my old 700p).  However, I just got a new palm (755p) and still having the same problems as the 700p even though I had done numerous hard resets.  I have tried doing a hard reset, then set up the Exchange ActiveSync account but still didn't work.  I tried syncing my info from Palm Desktop then setting up the Exchange account, still nothing.  So I don't think it's the EAS Updater but then again, I may be wrong since nothing has worked. 
    Weird thing is I gave the Palm Tech person my log in and password and they got onto my server fine (I know I shouldn't have but dang, I've been trying to figure this out for the last 3 wks - have changed password).  They used the port 80 as incoming server and nothing under proxy settings. But I tried the same thing and got the error message below.  Did it when Palm was on the phone w/ me so even they are not sure what's wrong.
    AirSAMStateMachine.c 2214 6 HTTP/1.1 400 Bad Request Date: Fri, 19 Oct 2007 06:44:00 GMT Server: Microsoft-IIS/6.0 MicrosoftOfficeWebS
    So I figured I change the incoming server settings to see if I can get it to work that way.  When I changed the incoming server setting to port 443 (automatic checks the SSL box) a different error shows (no proxy settings, since we don't use one)
    SSL Error: No trusted root Update certificate authority list. AirSAMStateMachine.c 1913 14721
    So I went and got the certificate installed using the instructions on the Palm site and when I synced, a different error shows up.
    AirSAMStateMachine.c 1913 109
    This is getting so frustrating.  How is it that 2 different Palm Techs can log on using the info I give them on 2 separate dates but I can't (we are doing the same thing according to them).  Palm is saying it's my phone but I just got a new one last night (755p). 
    Any ideas on what I should do?  By the way, I am able to log onto the web so that's not the problem.  I have set up my AOL and Yahoo on Versamail and they both sync fine.  Exchange ActiveSync won't sync anything, not even my Calendar (even when I did it separately). 
    I would appreciate any help you can give me.  Many Thanks.
    Post relates to: Treo 700p (Sprint)
    Message Edited by momof5 on 10-19-2007 12:04 AM

    We finally solved this problem. We thought the requirment is to have Server 2003 R2 but it turns out also that installing Exchange Server release 2 solves this  problems.  As soon as Exchange release 2 was ugraded, the initial sync worked and OTA Push was working just fine.

  • IPhone 3G won't sync calendar with Exchange 2003

    Hi - can't see this exact problem elsewhere hence the post...
    I have iPhone 3G syncing with OWA from Exchange 2003 just fine with mail and contacts. Calendar is totally blank though. If I create a new appointment on iPhone then it shows up in Exchange - great! If I do it the other way round then I get nothing on iPhone - unless I invite myself in which case it does! But then if I delete the email invitation then the entry disappears. I could live with that (just about) but not but being able to sync my calendar history is a big problem for me.
    By the way I can't sync my calendar history via iTunes to Outlook because the sync component crashes!
    Can anyone shed any light?

    Hi man, I got the same problem with my iPhone, but it has been solved..
    First, You need the Outlook 2003 or 2007 only, if you have a earlier version of this it isn't work.
    Second, You sould need to create a new PST file whit the Outlook Version 2003 or 2007, the file format must be on Unicode Format, no Outlook (97-2000) format, with this file format the import of calendar doesn't gonna be work.
    Third, You now have a PST whit Outlook 2003 or 2007 Version, you need to manually put your events on the calendar, Why? Cause if you just move it on the new calendar it gonna create and old instance of the event not a new instance, That's why iTunes doesn´t sync the calendar.
    I done all these and actually I can sync the calendar with my iphone.

  • IPhone 4S IOS5 problems sync Calendar with Exchange 2003

    One of my users is having problems sync Calendar with a brand new iPhone 4S running IOS5 and our Exchange 2003 Server. If an item is updated in Outlook it will not reflect it in the iPhone or viceversa. New items show up in both, only the updates in notes or changing some text in the subject or other elements in one side is not updated in the other side. Any help will be greatly appreciate.

    Hi man, I got the same problem with my iPhone, but it has been solved..
    First, You need the Outlook 2003 or 2007 only, if you have a earlier version of this it isn't work.
    Second, You sould need to create a new PST file whit the Outlook Version 2003 or 2007, the file format must be on Unicode Format, no Outlook (97-2000) format, with this file format the import of calendar doesn't gonna be work.
    Third, You now have a PST whit Outlook 2003 or 2007 Version, you need to manually put your events on the calendar, Why? Cause if you just move it on the new calendar it gonna create and old instance of the event not a new instance, That's why iTunes doesn´t sync the calendar.
    I done all these and actually I can sync the calendar with my iphone.

  • Any ideas for how to sync to Exchange 2003 - contacts and calendar

    Hi
    I am still searching for a mechanism to give me the sync solution I want, which is as follows:
    At work I have a PC running Outlook 2003 via an Exchange Server 2003 setup.
    At home I have an iMac running Snow Leopard
    In the middle I have an iPhone 3G
    I want to sync Calendar and Contacts across all three machines.
    I want to sync work email between the Exchange server and the iphone, but do NOT need this to sync on my iMac at home
    That's it.
    At the moment I can sync email, calendars and contacts successfully between the Exchange server and iPhone, using the over-the-air Exchange Sync on the iPhone. But sadly my iMac will not sync contacts and calendars to the exchange server 2003 as Snow Leopard only supports exchange 2007.
    Ironically (because I don't need this bit to work) I have managed to get my iMac to sync with my Exchange server EMAIL, by selecting the Exchange IMAP option when setting up the mail account on my iMac (as opposed to the Exchange 2007 option). However, I cannot get iCal or Address book to sync with Exchange 2003, regardless of the options I select when setting up the new accounts in Address book or iCal. I guess these just do not work with Exchange 2003
    I know that I cannot use mobileme as a solution, as you cannot have two over-the-air syncs going on, and I need to maintain my iphone link to the exchange server via activesync
    I also know that using itunes to sync via the cable will not work, as this creates separate contacts and calendar files on the iphone and so does not provide the syncing solution I seek.
    I have tried using google to act as the middle man between my iMac and Exchange server data - getting the iMac to sync to Google Calandar and Google Address Book, and then using a third party piece of software called gsyncit to sync from google to the .ost outlook file on my PC workstation. This works some of the time, but keeps crashing and leaving me with multiple duplicates to have to sort out - much too much hard work on a regular basis.
    So I still do not have a solution. Unfortunately upgrading to Exchange server 2007 is not a solution.....
    Any new ideas out there
    Thanks

    I don't think there will be a solution to this. Exchange 2003 just isn't supported.

Maybe you are looking for