MFP Anomaly Detected Access Points are moving from one wlc to another and vice versa

Hi together,
a customer has lost some Access Points to another WLC with 7.2 and then they come back after 15 minutes to the origin WLC with 7.5
Attached the messages
MFP Protection is configured as optional
152
Wed Nov 27 05:33:26 2013
MFP Anomaly Detected - 1 Not encrypted event(s) found as   violated by the radio 58:bf:ea:0f:67:4a and detected by the dot11 interface   at slot 1 of AP 58:bf:ea:0f:67:40 in 300 seconds when observing . Client's   last source mac 70:11:24:e4:43:0f
153
Wed Nov 27 05:31:40 2013
AP Disassociated. Base Radio MAC:88:43:e1:56:91:d0
154
Wed Nov 27 05:31:40 2013
AP's Interface:0(802.11b) Operation State Down: Base Radio   MAC:88:43:e1:56:91:d0 Cause=New Discovery Status:NA
155
Wed Nov 27 05:31:33 2013
AP Disassociated. Base Radio MAC:58:bf:ea:0f:73:d0
156
Wed Nov 27 05:31:33 2013
AP's Interface:1(802.11a) Operation State Down: Base Radio   MAC:58:bf:ea:0f:73:d0 Cause=New Discovery Status:NA
157
Wed Nov 27 05:31:33 2013
AP's Interface:0(802.11b) Operation State Down: Base Radio   MAC:58:bf:ea:0f:73:d0 Cause=New Discovery Status:NA
158
Wed Nov 27 05:31:28 2013
AP Disassociated. Base Radio MAC:58:bf:ea:0f:fc:20
159
Wed Nov 27 05:31:28 2013
AP's Interface:1(802.11a) Operation State Down: Base Radio   MAC:58:bf:ea:0f:fc:20 Cause=New Discovery Status:NA
160
Wed Nov 27 05:31:28 2013
AP's Interface:0(802.11b) Operation State Down: Base Radio   MAC:58:bf:ea:0f:fc:20 Cause=New Discovery Status:NA
161
Wed Nov 27 05:31:17 2013
AP Disassociated. Base Radio MAC:b4:e9:b0:e4:02:20
162
Wed Nov 27 05:31:17 2013
AP's Interface:1(802.11a) Operation State Down: Base Radio   MAC:b4:e9:b0:e4:02:20 Cause=New Discovery Status:NA
163
Wed Nov 27 05:31:17 2013
AP's Interface:0(802.11b) Operation State Down: Base Radio   MAC:b4:e9:b0:e4:02:20 Cause=New Discovery Status:NA
164
Wed Nov 27 05:31:15 2013
AP Disassociated. Base Radio MAC:a4:18:75:eb:da:b0
165
Wed Nov 27 05:31:15 2013
AP's Interface:1(802.11a) Operation State Down: Base Radio   MAC:a4:18:75:eb:da:b0 Cause=New Discovery Status:NA
166
Wed Nov 27 05:31:15 2013
AP's Interface:0(802.11b) Operation State Down: Base Radio   MAC:a4:18:75:eb:da:b0 Cause=New Discovery Status:NA
167
Wed Nov 27 05:28:26 2013
MFP Anomaly Detected - 35 Not encrypted event(s) found as   violated by the radio d8:24:bd:2f:df:6f and detected by the dot11 interface   at slot 1 of AP d8:24:bd:2f:df:60 in 300 seconds when observing Deauth.   Client's last source mac 00:23:14:a7:e3:54
168
Wed Nov 27 05:23:26 2013
MFP Anomaly Detected - 23 Not encrypted event(s) found as   violated by the radio f8:4f:57:a5:40:b2 and detected by the dot11 interface   at slot 0 of AP f8:4f:57:a5:40:b0 in 300 seconds when observing . Client's   last source mac 44:4c:0c:ba:27:77
Don´t know at the moment how to handle it.
Regards
Alex

Hi lAlex,
Disable Client MFP under WLAN advanced tab & see if this still occur
Regards
Rasika
**** Pls rate all useful responses *****

Similar Messages

TS4036 I have moved from one company to another and they both use iphones I backed my phone up before it was shut down I tried to retrieve contacts from my PC it did not work will it work when I get my new iphone?

I have moved from one company to another and they both use iphones I backed my phone up before it was shut down I tried to retrieve contacts from my PC it did not work will it work when I get my new iphone?

I updated my iPhone onto my friend's MacBook
Why would you do that, and not on your own computer? See the hassle it caused you?
can he just email me the folder
Backup files are too big to email. Use FTP, DropBox, etc...
how do I then put all that data back into my current phone from the new computer?
How to restore iPhone: http://lmgtfy.com/?q=how+to+restore+iphone

How do i Drag and drop From one tree to another and vise versa?

I have two tree structures and i'm trying to drag a leaf of a branch from one tree to another and vise versa. i'm using flex 3 to code it. I'm also trying to put a prevention on dropping a leaf of one tree from being dropped inside a branch of another tree. Anything that is dragged over to another tree should be placed as a dangling node in that tree. Please share this code and help me find a solution.
<?xml version="1.0" encoding="utf-8"?><mx:Application
xmlns:mx="
http://www.adobe.com/2006/mxml" xmlns:comp="
com.adobe.flex.extras.controls.*" initialize="data2
new
ArrayCollection(countries);"layout="
absolute"verticalAlign="
middle" backgroundColor="white" height="
551">
<mx:Script>
<![CDATA[
importmx.events.FlexEvent;
importmx.collections.ArrayCollection;
importmx.controls.Alert;
importmx.events.DragEvent;
importmx.managers.DragManager;
importmx.core.DragSource;
importmx.core.UIComponent;
importmx.controls.Tree;
// data provider for role name[
Bindable] private vardata2: ArrayCollection;
// variable to store the node that is dragged from a tree
private var draggedItemOfAccessTree:XML = null;
private var draggedItemOfExclusionTree:XML = null;
private var dragItemAccess:DisplayObject =null;
private var dragItemExclusion:DisplayObject =null;
// Array to store the Role list[
Bindable]public varcountries: Array = [{id: 0, name:
"Role 1"},{id: 1, name:
"Role 2"},{id: 2, name:
"Role 3"},{id: 3, name:
"Role 4"},{id: 4, name:
"Role 5"},{id: 5, name:
"Role 6"},{id: 6, name:
"Role 7"},{id: 7, name:
"Role 8"},{id: 8, name:
"Role 9"},{id: 9, name:
"Role 10"},{id: 10,name:
"Role 11"}
// this event is called when we begin dragging a node in a tree
private function onAccessListDragEnter( event:DragEvent ) : void{
event.preventDefault();
vards1:DragSource = event.dragSource;
var items1:Array = ds1.dataForFormat("treeItems") asArray;
if (items1 != null && items1.length > 0 && (items1[0] isXML)){
draggedItemOfAccessTree = items1[0];
dragItemAccess = items1[0]
asDisplayObject;}
DragManager.acceptDragDrop(UIComponent(event.currentTarget));
private function onExclusionListDragEnter( event:DragEvent ) : void{
event.preventDefault();
vards2:DragSource = event.dragSource;
var items2:Array = ds2.dataForFormat("treeItems") asArray;
if (items2 != null && items2.length > 0 && (items2[0] isXML)){
draggedItemOfExclusionTree = items2[0];
dragItemExclusion =items2[0]
asDisplayObject;}
DragManager.acceptDragDrop(UIComponent(event.currentTarget));
private function onAccessListDragOver( event:DragEvent ) : void{
event.preventDefault();
varvar1:Number = AccessTree.selectedIndex;
varvar2:Number = ExclusionTree.calculateDropIndex(event);
var node1:XML = AccessTree.selectedItem asXML;
var node2:XML = ExclusionTree.calculateDropIndex(event) asXML;
//restrict drag & drop to nodes within same parent
if(draggedItemOfAccessTree.parent() == node1.parent() || draggedItemOfAccessTree.parent() != node1.parent()){
DragManager.showFeedback(DragManager.NONE);
//return; }
elseDragManager.showFeedback(DragManager.MOVE);
private function onExclusionListDragOver( event:DragEvent ) : void{
event.preventDefault();
varvar1:Number = ExclusionTree.selectedIndex;
varvar2:Number = AccessTree.calculateDropIndex(event);
var node1:XML = AccessTree.calculateDropIndex(event) asXML;
var node2:XML = ExclusionTree.selectedItem asXML;
//restrict drag & drop to nodes within same parent
if( draggedItemOfExclusionTree.parent() == node2.parent() || draggedItemOfExclusionTree.parent() != node2.parent()){
DragManager.showFeedback(DragManager.NONE);
// return; }
elseDragManager.showFeedback(DragManager.MOVE);
private function onAccessListDragDrop( event:DragEvent ) : void{
event.preventDefault();
varSindex:Number = AccessTree.selectedIndex;
varEindex:Number= ExclusionTree.calculateDropIndex(event);
var Enode:XML = ExclusionTree.selectedItem asXML;
var Anode:XML = AccessTree.selectedItem asXML;
if((draggedItemOfAccessTree.parent() != Anode.parent()) ){
AccessTree.removeChildAt(Sindex);
ExclusionTree.addChildAt(dragItemAccess , Eindex);
// AccessTree.rdataDescriptor.removeChildAt(Anode.parent(),draggedItemOfAccessTree,Sindex);
//ExclusionTree.dataDescriptor.addChildAt(Enode.parent(),draggedItemOfAccessTree,Eindex); }
private function onExclusionListDragDrop( event:DragEvent ) : void{
event.preventDefault();
varEindex:Number = ExclusionTree.selectedIndex;
varSindex:Number = AccessTree.calculateDropIndex(event);
var Anode:XML = AccessTree.selectedItem asXML;
var Enode:XML = ExclusionTree.selectedItem asXML;
if((draggedItemOfExclusionTree.parent() != Enode.parent()) ){
ExclusionTree.removeChildAt(Eindex);
AccessTree.addChildAt(dragItemExclusion, Sindex);
// ExclusionTree.dataDescriptor.removeChildAt(Enode.parent(),draggedItemOfExclusionTree,Eind ex);
// AccessTree.dataDescriptor.addChildAt(Anode.parent(),draggedItemOfExclusionTree,Eindex); }
private function onDragComplete( event:DragEvent ) : void

Yes, I have set dragEnabled and dropEnabled to true. I trying to put restriction on dropping the node(aka leaf) of 1st free tree inside the branch(aka folder) of the 2nd tree. If something is dragged from tree1, it should be dropped only on tree2 i.e., dragged node should be appended at the end of tree2 and not inside nay of the branches of tree2. This functionality should work on both the trees. I'll be glad if u can provide the solution.

Moving from One Mac to Another

I'm considering selling my 13" Mid-2009 MacBook Pro for a newer 13" i5 MacBook Pro. It's the first time I've done a transition from one Mac to another and I have a few questions...
What's the best way to transfer everything over to my new Mac, without having to reinstall certain software? I'm worried about needing to re-install Logic, Aperture, Final Cut, or CS5, because these discs are packed away in boxes and I can't really get to them right now. If I have to re-install things like Firefox or OnyX, no big deal there... just looking to backup the Pro applications.
Can migration assisstant do what I'm looking for, or is there something better for this? Need some insight on how to handle this.
Thanks for reading!

THIS ONE I KNOW!!!
There's a Migrating your Mac wizard in the "Utilities" folder - when you start the NEW Mac - all you need is a network cable, when PROMPTED - when the new Mac turns on - it asks "are you migrating an existing Mac" (something like that) say YES - at that point, on your other system - you're going to fire up the "migrating your mac" program - which will be on your OLD system. Once there, the Network cable (Make sure it's compatible with gigbit speeds - this process will take some time!) but the two systems WITHOUT A SWITCH, Without a hub - plugged from one to another, will move EVERYTHING to the new system.
How?
You sign on as YOU every time you do anything. The program simply looks for anything NOT owned by the system - and 100% of your stuff is moved over properly, into the right places

HT1349 I have just moved from one pc to another. I had used 5 computers to attach to itunes. I went in and disabled all 5 of my accounts but cant get the new computer to give me a prompt to authorize this computer. Any ideas?

Hellow everyone,
I have just moved from one PC to another. They are windows pc's not macintosh. When i installed itunes on the new computer it stated that I already had 5 devices authrorized for this account. I did a little reading and went in and deathorized all 5 PC from the account as I am sure it was a couple pcs ago and a few iphones. When I try and go in and authorize an account I cant see anywhere where there is a prompt to authorize the new PC. I go into store and all it says is that there are no devices associated to this account. What I would like to do is associate my new PC and my iphone to this account and hopefully restore from the cloud all of my music and programs.
Any idea what I am doing wrong here or how I can resolve this. Thanks in advance.
Respectully.
CK

if it's music then drm is not used there any more and drm can be removed from previously bought drm material without cost

DATAGRID FOCUS ISSUE: Focus got lost, while moving from one cell to another cell using tab key.

Problem: Focus got lost, while moving from one cell to another cell using tab key.
Example: In an AdvanceDataGrid, there are three columns having custom ItemRenderer with Spark TextInput control (editable=true & focusEnabled=true).
When I try to move the focus in with in 2nd, 3rd & 4th column using tab key, focus got lost. Most of the time it’s working, but some time it doesn’t work. There’s no clue as to how may rows/columns the focus has jumped to; or whether the focus has gone out of the data grid altogether.
Observations: I am not sure whether this problem is because of custom component implementation or it is because of some issue related to Flex Component.
It only occurs when we perform some actions like some server call, some complex logic execution etc. at the focus out event of itemrenderer.
There is one property of datagrid i.e. editedItemPosition which contains row & column index of datagrid. On the focus out event, it gets null when focus got lost. We tried to set it, but it didn’t work.
Steps Performed:-
1. Currently focus is in 2nd column i.e. Apply to #.
2. Once I press tab key from 2nd column, it goes to 3rd column which is correct.
3. Now if I press tab key from 2nd column i.e. Payment #, focus should go to 3rd column, but it goes out of data grid and set the focus of button which is outside data grid.

http://search.java.sun.com/search/java/index.jsp?qp=&nh=10&qt=%2Bjtable+%2Btab+%2B%22enter+key%22&col=javaforums

Moving from one computer to another w/o messing up the iPhone setup

i want to try and start syncing with a new computer i am about to get without having to wipe the iPhone
is there anyway that i can move all the relevant files from my old desktop to a new one so that the iTunes playlists and the apps in folders stay as they are now?
i know it is not just a matter of copying over the iTunes folder, because there must be files in folders like HD & ~/App Support or HD & ~/Pref, and quite possibly more
but there may also be a problem that the computer number is associated with the syncing, and that it cannot be done
either way, i want to give it a go, so does anyone know if there is a knowledge base on this, or even an app that would allow me to achieve this task?
i am fully upto date with the software updates and iOS (with an iPhone 4)
many thanks

i know it is not just a matter of copying over the iTunes folder, because there must be files in folders like HD & ~/App Support or HD & ~/Pref, and quite possibly more
Yes it is, and no there is not.
I have done this twice in the last year - when switching from a PowerBook to my MacBook Pro, and after the hard drive failed on my MacBook Pro and was replaced under warranty.
but there may also be a problem that the computer number is associated with the syncing, and that it cannot be done
This is also incorrect. In regards to iTunes content, an iPhone can be synced with the iTunes library on a single computer only, and photos can be transferred from a single computer only. If you transfer the iTunes folder from your Music folder where all iTunes content is stored including 3rd party apps along with playlists, play count, etc. from one computer to another and you authorize the computer with your iTunes account with iTunes, you can sync your iPhone with the computer the iTunes folder was transferred to without losing any iTunes content on your iPhone and as if you aren't syncing with a different computer.
The same applies with photos if you are using iPhoto. All you need to do is transfer the iPhoto Library from one Mac to another and nothing will have changed.

Tracking amount moved from one account to another in General ledger

Hi,
I have a doubt in GL.
If we post a batch, the amount may be transferred between many accounts. How to find the total amount moved from one account to another after journal posting?
Regards,
Raj

You can do it from your activeSync form:
        
        <Field name='waveset.organization'>
            <Disable>
                <neq>
                    <ref>waveset.organization</ref>
                    <s>Top:Global:Users</s>
                </neq>
            </Disable
            <Derivation>
                <s>Top:Local:Users</s>
            </Derivation>
        </Field>

ML Automatically sorts files by name when moving from one folder to another.

Hello, i usually used to move a bunch of files like images or mp3s from one folder to another and in Lion, when moving like 20+ files to another folder, they was being placed where you clicked.
Seems that in ML when i move the same amount of same files, rather than placing them at the cursor, it just moves them and sorts by name. How to avoid this?

Anonymous User,
Links just request pages. Maybe the requested page could run the procedure in a before/after header process.
Scott
P.S. If you like, you can show your name in this forum instead of a numeric ID not only by signing your posts, but also by clicking on 'Forum Settings' and setting 'Name visible to others' to Yes. Unsigned, anonymous posts do not always elicit the most thoughtful or immediate responses from volunteer contributors to the forum.

PSE12 Organizer - can you copy photo from one folder to another and import copy into Organizer and still have original in other folder

I have been using folders to organize all my pictures and I will copy photos from folder to folder, often having them in 2 or 3 folders based on use. I tried to copy a photo in Organizer PSE12 from one folder to another and you can only move it, that means I can only have one copy of the photo. That is fine if I am using tags and want to search for it, but I want to have mult copies in mult folders. Organizer will recognize that it is there but it won't import it into the new folder. Until I move it, it stays in the original folder. I can drag it out of Organizer and drop (copy) it into a new folder fine, but it won't show in organizer in the new folder. Is there any way to copy and have multiple copies show up in multiple folders?

Hi,
The organizer works on the principle of not having multiple copies of the same photo.
If you have multiple copies spread in different folders, then making changes to one doesn't affect the others. The use of tags and albums are there to give different views of your photos.
You can't have multiple copies with exactly the same name even if they are in different folders. You could select a photo and duplicate it (File -> Duplicate) and then move the copy into a different folder but the name will be different.
If you want different folders for a specific reason, it is possible to use albums to collect the group of photos and then export them to a new folder outside of the organizer. You can also rename on export which is useful if you want to arrange the photos in a specific order.
Hope that helps a bit.
Brian

Can you move your notes from one iphone to another and how?

Can you move your notes from one iphone to another and how?

You can do this a couple ways. If you are using MobileMe, notes is one of the options for synchronization and that would be automatic. Another way is to backup your iphone to iTunes, this backs up essentially all the information on your phone (except for music) and if you restore the other iphone to the image of the original your notes will be transfered.

I changed from one iPhone to another and backed the first one up to the icloud. I have restored the content to my new iphone but cannot download the photos. Any advise will be greatly appreciated

I changed from one iPhone to another and backed the first one up to the icloud. I have restored the content to my new iphone but cannot download the photos. Any advise will be greatly appreciated

Welcome to the Apple Community.
Photos and some other items are added back after the restore has completed, you may need to wait a while.

Possible to transfer 'actions' from one computer to another/ and earlier CS3 actions to CC actions?

Is it possible to transfer 'actions' from one computer to another/ and earlier CS3 actions to CC actions?

you are allowed two installations and activations with each single user license.
just use your installation cds and your serial number to install on your new computer.
if you no longer need cs6 on your old computer or that old computer has your 2nd installation/activation, open one of the adobe programs and click help>deactivate. you can then uninstall from your old computer.

I have the iPhone 4S and my daughter has the iPad 2, we share one Apple ID, is there anyway to stop her text messages from appearing on my iPhone and vice versa?

I have the iPhone 4S and my daughter has the iPad 2. We share my Apple ID. Is there any way to stop her text messages from appearing on my phone, and vice versa? She doesn't need to be reading my texts!

no, there currently is no way of doing this. You can only create a second Apple ID.

How can I move someone's hair from one photo to another and place it on another person?

How can I move someone's hair from one photo to another and place it on another person?

Duplicate post.

MFP Anomaly Detected Access Points are moving from one wlc to another and vice versa

Similar Messages

Maybe you are looking for