MFP in 7.0.98

Hey All,
Did anyone notice the switch for en/disabling MFP v1 per WLAN and per AP are taken out in 7.0.98? even it still shows in the help, but I can't find in the GUI interface any more. On the 'advanced' tab for WLAN, the client MFP settings is still there, but infrasutructure MFP is gone. could anyone tell me why if you know it?

Hi Sundell,
Infra MFP is no longer configurable on per wlan/AP. You can still configure it globly.
command - config wps mfp infrastructure enable/disable.
Plz do not forget to rate useful post.
Thanks

Similar Messages

Fax function of HP LaserJet Enterprise 500 Color MFP M575

Hi,
I am one of users of HP LaserJet Enterprise 500 Color MFP M575.
I would like to know can I set the printer do not print my fax number and fax header on paper when I fax my document to others.
I had login as admin but I did not see where I can config it.
Thank you.
Regards,
Jimmy Pun

There is no change to this problem after 6 months since the last post. Put simply, and as stated in the previous posts, there is no way to scan a document and receive the image on your PC. If you are working with graphics for any length of time or want to create an image for inclusion as an image in a document or web page using this piece of equipment will not allow you to do so.
Great shame as every other function works well - it cannot be beyond the wit of HP to include a Windows application that enables you to scan an image, receive it in the software you are using at the time (e.g. Outlook, Word, Photoshop...) and use it in your work.
HP Printers several years older than this £1000+ Enterprise printer were able to do this simple job and have done so for a great many years. Just being able to use Microsoft's Fax and Scan would be start.

HP LaserJet Enterprise 500 Color MFP M575 - Can't scan from Windows

We recently purchased and installed an HP LaserJet Enterprise 500 Color MFP M575 to be used as a networked all-in-one solution for a number of offices. I have been able to get it set up on our network and have installed the appropriate drivers on the requested Windows 7 x64 machines, and network printing works perfectly. However, it seems that despite the fancy scanning features available from the all-in-one itself (scan to email, scan to a network folder, etc.), I can't find any way to do an old-fashioned scan from Windows.
I have installed the full software solution available on the driver download page for the device, and while Windows lists the device as a "Multi Function Printer; Scanner" it does not recognize it as an actual scanner. The built-in Windows Fax and Scan simply reports that no scanners are installed. The software installation did not include the HP Solution Center (which I am used to seeing from my experience with various other HP all-in-one devices) or any equivalent for direct scanning. The driver download page for the device does not include any separate scanning drivers, so I can't be certain if they were included with the full installation or exist at all.Some of our staff also use Adobe Acrobat to scan, and even that fails to recognize the MFP as a scanner.
We'll eventually be setting up the device to scan directly to a network folder, but we need a fallback while IT takes their time getting it set up; I can't imagine that the simplest option is not available at all. I must be missing something here, any assistance would be greatly appreciated.
Edit: To add, I also ran the HP Print and Scan Doctor. Interestingly, it reports the device as a printer and only offers to "Fix Printing" without any sort of resolution for my scanning problem.

There is no change to this problem after 6 months since the last post. Put simply, and as stated in the previous posts, there is no way to scan a document and receive the image on your PC. If you are working with graphics for any length of time or want to create an image for inclusion as an image in a document or web page using this piece of equipment will not allow you to do so.
Great shame as every other function works well - it cannot be beyond the wit of HP to include a Windows application that enables you to scan an image, receive it in the software you are using at the time (e.g. Outlook, Word, Photoshop...) and use it in your work.
HP Printers several years older than this £1000+ Enterprise printer were able to do this simple job and have done so for a great many years. Just being able to use Microsoft's Fax and Scan would be start.

HP AiO remote doesn't recognize 3rd party toner as compatible in LaserJet M1217nfw MFP

Hi,
I have a HP Envy 17 running Windows 8.1, a MacBook Air, an iPhone and a HP LaserJet M1217nfw MFP. I recently replaced the toner with a 3rd party replacement cartridge and while the printer does give me a "supply memory error" I am still able to print just fine from the Mac and my phone. I am unable however to print from my Envy. The HP All-in-One Remote app in Windows 8 gives me an "incompatible cartridge" message and says there are no solutions availble. Is there a work-around to this?
I am not very good at Windows 8....
Thanks

Hi Thaddeus,
Although the printer may resoponse to some commands, a supply memory error is an error state about the used cartridge.
Due the error message on the screen the HP AIO Remote recognize the cartridge as incompatible, that cannot be bypassed
with any settings, resolving the issue which cause the error message is the only key to resolve a such.
If the HP AiO Remote fails to print in such condition the only solution is to fully resolve the condition by following the steps listed in my previous post.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Can't install HP Color LaserJet CM1312nfi MFP at notebook HP Pavilion

I bought new notebook HP Pavilion 13-a051sr with Windows 8.1 (x64) onboard.
I'm trying to install HP Scan.
While installing all-in-one HP Color LaserJet CM1312nfi MFP using "CM1312series-win7-full-solution-AM-EMEA1-v5.1.exe" can not get after the dialog window "Locating the printer". Printer could not be found even if I write down printer' IP-address. The latest printer firmware is already installed. Firewall is disabled, antivirus is closed.
I installed printer without any problems using it IP-address. What can I do in order to install scanner module?

HP Print Drivers

LaserJet Pro 200 color mfp m276 Printing issues

I have had this printer for about a year now. Now it has started printing solid black lines across the page I am printing, whether it be from my computer or a fax. I can run the cleaning process from the printer and its fine for a few hours and then back to the solid black lines. It gets so bad there is more ink on the paper than white when it does this. Have tried everything I can think of to cure this to no avail. I am running hp cartridges and just plain white paper. Any ideas as to how to fix this. These lines are thick lines, just not _____ but are about 1 " wide each.
I really need help with this really soon or I will have to replace it with another brand. I use this in my office and can't have important faxes coming across with all these lines so I can't read it. I posted this Saturday and still waiting for someone to respond.

Hi @RandallRaley ,
I understand that when printing, you are getting solid black lines across the paper and now on the back of the paper. You are using HP cartridges, plain paper and have ran the cleanings with the same result. I can help you today.
Try another type of 20lb -24lb plain paper to see if you have the same results.
I would do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
Update the printer's firmware. HP LaserJet Pro 200 color MFP M276nw Drivers.
Select your operating system, click next, click the link for firmware.
Try printing again.
If the issue persists, follow the steps for aligning and cleaning the toners, printing a Print Quality page, inspecting the toner for damage, checking the paper and driver settings to see if this will resolve the issue.
Troubleshooting Print Quality Issues.
How is the printer connected? (USB/Ethernet/Wireless)
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
Are you getting the black lines on the Hardware Self Tests also?
Where is the printer located? (on a desk, on a enclosed shelf in desk)
What kind of paper are you using?
What is the weight of the paper?
Was there any black on the toner?
Please provide in detail the results if you are still having issues.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Laserjet pro 100 color mfp m175

We have a number of HP LaserJet Pro 100 Color MFP M175's in our school. They are connected to the network via ethernet cable rather than wirelessly. A number of users print to them either from a Windows XP (running service pack 2) desktop or from a Windows 7 (newly built) laptop. They were working fine for a few days and then all of a sudden they may have any of the following problems:
unsupported personality error printed at the top of a lot of pages (ie you may try and print one page but hundreds of pages come out with this error).
there may be an invalid driver error on the control panel on the printer
there may be weird alien-looking characters at the top of hundreds of blank pages
initially all of the printers had the driver installed that came with the printers, when we started getting the error, we then tried running the diagnostics doctor on the hp web site, which said all the drivers were valid. We have also tried using the universal print driver from the HP support website, but still get the problem after a few days. We can make all of the errors go away by re-installing any of the above drivers, but then the problem starts happening again after a few days. The server is Windows 2003R2 running service pack 2, we have tried installing the drivers on the server too, but they won't install. Another printer was set up this week in the school office which only has people printing from Windows 7 machines and doesn't have the error - this could be because it's too soon to happen yet, or maybe because there are no Windows XP machines printing to it? (It does print through the same server as the others) Help would be greatly appreciated, we are a school and so can't afford to be wasting lots of paper, plus this is taking up all of our time rather than fixing other issues! thanks in advance

Tammy, sounds like there could be a couple things that might cause this issue. The first of which is that the RJ45 cable you are using to connect the printer might have become corrupted. I would replace that cord and see if the issue remains.
Second, I want you to see about updating the firmware from this website :
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=5076465
If that still presents issues, you can use that same website to download the more recent drivers. I would uninstall the old version you have on the computer and then open that link and install the full feature software.
Let me know how that goes and I will get right back with you!
I hope you are having a wonderful week, and I hope that the weather where you are located is as beautiful there as it is here!
-Spencer

MFP M127fn connected, test printing OK, can't print from applications

Hello Everyone!
I have just set up my M127fn via USB on a Windows 8 system. The set up went fine. I have a small stack of test pages from the HP software, but it won't print anything from any applications like MSOffice. The HP diagnostic software (Print and Scan Doctor 4.6) can communicate with the printer and everything checks out OK.
Any suggestions?
Thanks in advance.

Hello!
I have replied twice to your last posting, but have heard no response. Unless a solution can be presented quickly, I fell I must return the product. LPug and play was introduced with Windows 95 and this HP product has not lived up to that 20 year old technological standard. My previous replies are copied below.
Please respond soon.__________________________________________
Re: MFP M127fn connected, test printing OK, can't print from applications
Options
‎01-31-2015 08:06 AM
Hello again!
I haven't heard a response to my most recent reply. Is there anything you can suggest before I give up and return this HP product to the store? I would like a quick resolution to this. As an update to my previous email (copied below), printing is no longer working through Adobe Reader.
Thanks,
Chris
Re: MFP M127fn connected, test printing OK, can't print from applications
Options
‎01-28-2015 01:08 PM
Hi,
Thanks for getting back to me. I have tried a variety of different programs:
Mozilla Thinderbird (email) - no results
MS Word - no
ms excel - no
Finale (music software) - no
Adobe Reader - yes!
Google Chrome - yes!
NotePad - yes!
perplexing!

Hoping for repsonse from HP, re: Laserjet 400 Color MFP M475dw can not locate wifi network

Greetings!
MY HP Laserjet Pro 400 Color MFP M475dw (9 months old) no longer finds any wireless network in my home. It worked fine then stopped for no reason I can determine. Nor will it print via USB cable direct from my PC. I opened a case with HP on 9/1/14 for this issue (Case [Edited for Personal Information]) but have only received emails from HP asking for a valid phone number and the address of the printer location, all of which has been provided several times. The first email from HP gave me a phone number to contact HP but that number was missing a digit (1-890-946-500). Please help! This printer is the only color printer I have to use for my home-based small business. Thank you! Wendy [Edited for Personal Information]

Hello @windypoo ,
I just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP laserjet CP3530 MFP, I can't get this baby to scan to a server or workstation folder

Hey Guys(and ladies),
I have a HP laserjet CM3539 MFP and when I try to set up the scan to folder option, and I click the scan wizard, it asks for me to install the CD that came with this printer. I purchased it on ebay and they don't have a CD for it. I tried downloading that Park admin and it doesn't work in 32bit systems(using Windows 7 Ultimate 64)
Can someone walk me through this or can they copy the CD and I'll pay for shipping and all, I just need this scan to work so my employees can work saving docs on the server again.
Thank you,
Daivd-

Hello Davidshammer,
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial LaserJet Forums.
I am aware that you have been already referred to look into posting in the commercial forums, it would be in your best interest to do so. This is HP's consumer forums, we do not have the training nor the knowledge to look into commercial products.
The support page for your product may be helpful in the meantime: HP Color LaserJet CM3530 Multifunction Printer series Support
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Want to print remotely to my HP LaserJet Pro 100 color MFP M175nw

Hello! I have a
HP LaserJet Pro 100 color MFP M175nw printer in my office. It is connected to my wifi network from the office and i can use it from several laptops from office with no issue.
Now i want to be able to print and scan papers from my home pc also which is connected to my home wifi network.
I found there it is possible to print pages over internet. Except hpeprint option, how can i add printer from office to printer list from my home pc.
Please help me.
Thanks!

Hi Tolick,
Thank you becoming a member of the HP Support community. I understand that you have an HP Laserjet 100 at your office and you would like to be able to print to it when you are at home.
Super_Dave is correct with the solution he gave you. I just wonder if you have set up the ePrint feature of your Laserjet yet and customized the ePrint email address? If you have then using the ePrint software that you installed on your laptop should allow you to print to your office printer from home. The instructions on how to do this are in the HP ePrint Software User Guide on page 16 in the section titled "Use HP ePrint (Windows)".
If you haven't set up the ePrint feature of the printer I have included a two documents for your reference. The first one is how to get the claim code and the second is how to setup the customized ePrint email address. This may the step that is missing to make the ePrint software work for you.
HP ePrint Software User Guide
Getting the Printer Claim Code
Setting Up a Custom Email Address for ePrint
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Hp laserjet m1132 mfp can't print from remote desktop

Hi, i've installed HP LASERJET M1132 MFP in my PC with windows 7 ultimate 32 bit and it works fine. But when i connect using remote dekstop with our Windows server 2008 r2 64 bit. its not printing. error "test page failed to print , would you like to view the print troubleshooter for assistance?" and it doesnt solved the problem.
please help

Thank you for your interest.
The situation is a bit different than the picture. Windows Server 2008 R2 is available through the WAN. LAN is plugged into the PC-1, PC-2 and Konica Minolta printer. HP LaserJet M1120n MFP is connected via USB to the PC-1. OKI ML 3320 printer is connected via LPT also to the PC-1. PC-1 has access to Konica Minolta printer via the LAN. PC-2 also has access to Konica Minolta printer via the LAN. PC-2 is also available for PC-1 HP and OKI.
It seems to me that I found the explanation for the printing problems - some of "my" printers are simply not compatible with Windows Server 2008 R2. I found on the net the following information:
http://www.windowsservercatalog.com/item.aspx?idItem=cdde267a-800d-2d9f-1f0c-225cabd6838e&bCatID=128...
http://www.windowsservercatalog.com/item.aspx?idItem=31df9819-ca52-4684-dc3b-8e31b70c77d7&bCatID=128...
http://www.windowsservercatalog.com/item.aspx?idItem=6475235d-8dbb-9e95-11dc-3575d569acc2&bCatID=128...
http://www.windowsservercatalog.com/item.aspx?idItem=59731747-9976-8d51-dcbb-7664cbc17a89&bCatID=128...
I think I can close the topic.
(translated from Polish into English using Google translator)

HELP! My HP LaserJet Pro 400 color MFP M475dn printer will NOT print!!!!

HP LaserJet Pro 400 color MFP M475dn- CE863A
Printer is on a network and can connect to multiple computers that include: Mac OS X, Windows 7, and Windows XP.
When I try to print from my iMac, the printer queue says "The printer is not connected". When we try to print from the Windows computers, it just sits there in the queue and doesn't print. When I go over to the printer itself and try to print either a demo page or a supplies page directly from it, it says on the screen that is printed it but nothing happens. It doesn't hum or anything! The port where the network cable is connected is lit green which HP says that means that the network cable is connected. We have had this printer for a year now and something like this has never happened.
I haven't switched any software or anything before this happened. It was working fine on Saturday when we were using it, but when we came into work today, it just decided it would stop printing!
I am stumped! I tried 'pinging' the printer's IP address from my iMac and it pings just fine. Does anyone have any tips?
(I tried doing the obvious too- like turning the printer on and off and shutting the computers down- and nothing!)
This question was solved.
View Solution.

Okay, so I'm feeling slightly stupid right now. I decided I would shut the printer down for about an hour to see if that was it and what do you know- it was! I had shut it off a few times before but I guess it just wasn't long enough. What a pain!
Thank you to anyone who took the time to read this! Sorry to waste anyone's time!!

Hp laserjet 400 mfp can't scan, i lost the installation cd

Hello,
i have a hp laserjet 400 mfp and i can't scan.
I have Windows 7 and the printer works just fine with the W7 software, but the scan option is not available, because the software installs only the printer, not the scanner.
I lost the installation cd and the installation software from hp support only install the printer , not the scanning option. Please help.
I also tried the e-mail scanning software from hp, but i don't know if it works , because i don;t know how to set the settings.
Thank you.

Hi, thank you for your answer. I tried with the full software you gave me in your link, but it was no good, because my printer is a Laserjet 4100 MFP, and the software was asking for an usb device, wich my printer is not...
I don't need the driver for the printer, i have that driver, but that driver sees the MFP like a simple printer, without scanner, so, the scanner remains usefull. I need the full software or the CD.
I don't receive an error, i just need the full software for Laserjet 4100 MFP. I didn't find it on HP's website, unfortunately and i don't have the installation CD anymore, cause i lost it....
Thank you.

HPM1212nf MFP i can't scan but wireless network works fine for printing

i have the MFP set up fine for printing over a wireless network. Any idea on what more i need to do to get the machine to accept a scan command from the computer using HP Laserjet Scan?

Hi there @bc123!
Thanks for contacting the HP Forums!
I see that your having a communication issue with the HP LaserJet when it comes to scanning to the computer, and I would be happy to provide you with my assistance.
A good place to start when troubleshooting scanning is to ensure the CD was installed correctly on your computer. If the CD is unavailable then I can provide you with a link to the HP driver download: Drivers & Downloads
In the link provided you will want to:
1.enter your printers model number and click GO
2.select your printer model
3.select your operating system and click NEXT
4.Click on Driver - Product Installation Software (‏1)
5.Click DOWNLOAD next to the full feature software
To provide you with a more direct link to your software and to better assist you, would you please provide me with the following information:
1. What operating system version the computer is running (ex. Mac, Windows, etc.).
Bellow are 2 links I located from HP and Macintosh on how to locate your version of operating system.
Which Windows operating system am I running?
Finding the OS X version and build information on your Mac
2. If the computer is running Windows I will need to know what version (ex. 32-bit or 64-bit).
I have provided another link from the HP web site showing you how to check if its 32-bit or 64-bit
Is the Windows Version on My Computer 32-bit or 64-bit?
3. Laserjet model number (ex. P1102w, CP1025, etc.).
Please post back with the requested information, as well as the results of your troubleshooting.
Let me know if this was helpful!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

HT3669 HP M1213nf MFP Printers can't scan using OSX Mavericks

I have 2 HP M1213nf MFP Printers they both install fine and printing is ok from OSX Mavericks and iOS devices however there is no sign of being able to scan from these. The articles on both apple and HP site just don't work as there are no scan options to click if you follow the instructions!
none of the described scan methods work ie using preview, image capture etc because there is no scanner shown
my current work around is install the scanner into windows 7 via parrallels.... nice one apple....
I would really much prefer to be able to scan natively into OSX

Well, you should qualify that statement.
It does not work under Mavericks (at least it doesn't for me in Mountain Lion). The OS support for this printer is gone.
The only "work" around here is to use the HP Scan application. Please correct me if I am wrong.
Yes, I have the Lion version drivers installed. See: https://discussions.apple.com/message/24142631#24142631

MFP in 7.0.98

Similar Messages

Maybe you are looking for