MFPR - Processing Inspection Lots for Production versions issue

Hello,
User are not able to seeing line item to create inspection lot for a specific part number.
I checked inspection set up in material master, rate routing, and compared with similar part numbers.It all looks good to me.
Any help would be greatly appreciated!!
Regards,
Owais

In REM Inspection lot for Inprocess is generated for header material for which you actually define "production version".
Line items can not be seen in MFPR.

Similar Messages

Inspection lot for production order lot and not for single pieces

Dear all,
I have a production order , for example, for 12 pieces / serial number . Material is produced in lot , in this case 3 lot of 4 pieces.
Pieces in a lot are linked toghether in a grap.
Production order create an inspection lot where I can store quality data for every pieces / serial number.
I need to store quality data at lot level ( for example the grap weight );
Is it possible ?
Regards

Can you not create Char/MIC like weight & attach the task list to the inspection lot?

Enhancement-One inspection lot for early lot and serial profile

Hi,
I have a requirement shown below.
Can anyone guide me to proceed this Enhancement from the start?
Inspection lot for production order is created at production order release, when the finished good has a serialnumber profile assigned in the materials master and the serialnumbers are captured in the handling unit assigned to the production order, the system will create another inspection lot.
Required system enhancement:
Only 1 inspection lot per production order should be generated.
NB. Without this enhancement both inspection lots created for the production order have to be closed to be able to close the production order.

Please try with sub-routine: userexit_move_field_to_lips or userexit_save_document of include: MV50AFZ1.
I guess clearing LIPS-QPLOS for specific conditions would do the trick for you..
Reward points
Regards

Inspection Lot for Process Order without Header Material

Guys,
We have an scenario that we create a Process Order without Header material using T code CORO. Is it possible to assign or create a Inspection lot for Process order?
Regards,
Senthilraja

Hi
Please refer
QPL10004 User subscreen for displaying additional data in insp. lot
Regards
Sujit

Inspection Lot for co-product & By Product

Dear Friends,
How to manage inspection lot for Co- products in production
Is there any specific inspection type
Thanks & Regards
Raj

Hi raj
531 Goods receipt from by-product from the order
The goods receipt of a by-product usually refers to an order, but it can be entered without a reference.
If a component is entered with a negative quantity in the order, a reservation item is created with 531 (instead of 261). The receipt of a by-product can be entered when the component for the order is withdrawn from stock or it can be entered as another type of goods receipt.
Possible special stock indicator: E, Q
Acivate 05 inspection type for Co-product.
You can also try this by MB1C transaction.against producton order
Also check the mvt type 545 and 581
Check this will work
Regards

Creation of one inspection lot for more than 1physical sample

hello SAP,
we have one common question.I have created 3 physical sample 20000006,2000007,2000008 and now i want to create one inspection lot for these 3 physical sample through QPR5 Transaction but system is generating each inspection lot for each physical sample which is wrong process. this is common scenario for most of the industry.SO please clarify and provide the solution

Hi,
I hope this solution gives some way out for you to solve your problem . I assume the sample is for the same material , phy. sample type and category
Create a new physical-sample drawing with refernce to :
Using this function, you can create a new physical-sample drawing (with one or more physical samples) that references:
An inspection lot
A production order or process order
A production version
You use this function to create physical samples that have not been planned in a sample-drawing procedure and which you can draw from a production process according to your specific needs. In an inspection during production, for example, you can draw physical samples from the process on the basis of time or quantity (for example, a physical sample every three hours or for every 1000 liters of material produced). You can freely specify the inspection-relevant operations in which you want to inspect the physical samples for the new physical-sample drawing.
please do let us know wether you were able to create one inspection lot .Or else please ellaborate the question step wise t-code and functions Will try to find a solution .
cheers
kp
source of information : SAP

Inspection lot with Production Order

Hi friends,
I am PP consultant and need some help in setting up a scanario of Production order with inspection lot.
I need to setup a scenario where a inpspection lot is created from production order manually (not at the time of release). The purpose is to post few quantity of production order to scrap storage location. Inspection lot needs to be created only in certain production orders where some of the quantity has to be declared as scrap and that needs to be rejected with usage decision.
can any one please suggest the overview of such scenario.
Regards,
Rohit

Dear Rohit,
You want to create a manual inspection lot only for the purpose of Scrapping and also want it to be done with Usage Decision.
You can not use inspection type 89, as it is not stock relevant (Inspection type for Miscellaneous inspection),
There is one another solution with inspection type 08( inspection for Material Movement), but it might look Lengthy.
1. Release a Production order. say 100 qty.
2. If during process, 10 is scrap, then perform Partial Confirmation of 10 Qty.; Stock will be in Unrestricted.
3. Now, through MB1B, transfer 10 qty from Unrestricted to QI.
4. As you have inspection type 08 active, System will create an Inspection lot for 10 Qty.
5. You can post this whole 10 qty to Scrap while giving Usage Decision.
I think, in your process, Scrapping is not done frequently, that is why you do not want inspection lot at every production order.
in that case this solution may solve your problem.
regards,
Amol
Edited by: Amolbook on Jan 12, 2012 3:13 PM

Customer number not in the inspection lot for a make to order scenario

Hi All,
I know that standard SAP will get the Customer number into Insp. lot only for insp. types 10/11/12. I am wondering if someone know a way to get the customer no. into insp. lot for insp. type 04 where the material is make-to-order scenario and the Production/Process order has the Sales order and customer no. without activating User-exit. The quality users want to be able to see the customer no. in insp. lot without having them to go to process order.
It makes no sense to me why the customer no. is not brought into insp. lot when that is available in the Prod/process order, which can further be used to select the customer specific insp. plans for 04 insp. type Insp. lot without using Variant configuration.
Any light on this topic is appreciated.
Thanks.

Hi Srikant,
I guess.........
Normally the inspection lot refers the triggering document that are the trigger cause for them.
- Inspection type 01: - Purchase Order and GR material document.
- Inspection type 03: - Pro. Order Number
The same way...
The inspection type 10\11\12 are purely related to the SD, and directly integrates QM and SD. Hence in the inspection lot for the inspection types directly integrated to SD, it will furnish the Sales order number \ Customer.
But the inspection type 04 is purely have it's relation to Production process. So it will have the details related to integrations it has i.e. the "Pro. Order." Hence it integrates QM-PP, it have the data related to PP (Pro Order), not the SD's one.
But I think one way you can achieve it,
Assign the Customer number also to the inspection plan along with the Material. So I think at the time of assigning the inspection plan to the inspection lot, it will refer the Customer number also and will display the Customer number along with Task list Group\Group Counter, in the inspection specification screen in QA03/02
Regards,
Shyamal

Inspection Lot for Inhouse Operation Not Creating

Dear Friends,
My process is Like this, in production Order Out of ten operation eight operation are subcontracting Process.I am getting inspection Lot for this eight operation by maintaining inspection type 0130.But i am not getting inspection lot for inhouse operation by maintaining inspection type 03 also.So Please tell me what setting i have to do to get inspection Lot for inhouse operations.
Your Valuable solution is important for me...
Regards,
M.M.S

Hi Mohammed,
Check Inspection type maintained in Material master, it must be checked for "active". If it is active then system will create inspection lot as soon as you release your order.
Regards,
Shyamal

Production version issue.

Dear Guru's,
I have created two version in material master.
also I have changed in "opl8"{ production version = Manual selection of production version}
but still system is not asking me for production version at the time of creation of production order.
system is asking me routing only
now I am selecting version from function>read master data ( production version).
please sugest me wat i have to do for pop up of production version at the time of production order creation
and also system is not giving me any request no. at the time of save the changes in IMG.what will be issue
Nilesh

Dear,
please see that PV is applicable in terms of lot size, dates and status
if both
PV are valid wityh respect to the above then only upi will get the pop up for PV selection.
MRP4 setting is alosm required.

Single inspection lot for multiple operation

Hi
I am creating a process order having 10 operation. the 3,5 and 8 are quality inspection (inprocess inspection) & last is PP operation that is for final confirmation.
The control key in quality operations are pi02 and for production operation are pi03.
i am using insp type 03 in material master
Curently only one inspection lot is trigerring for all operations hence while RR, all operation are appearing (Quality & production).
User needs diffirent inspection lots for different quality operation.
How can i triggere lots per QC operation??
I would be vary thankful if i get it.
AYK

Hi
Std will create one inspection lot for 1 process order
and RR will show all operations which is related to inspection
ask PP guy that cotrol indicator Pi03 - insp. char to be uncheck
then it will not show those operations not relevant for inspection
is't fullfill your requirement
why your business needs individual inspection lot for each operation?
give info
Thanks
Sami

Inspection lot for certificates

Hi
Is it possible to generate inspection lots for goods receipt inspection for a purcahse order only on absence of quality certificate .
Thanks

Sankar,
You can do this by selecting the appropriate value for the field "Control without certificate" for the required certificate type in the configuration settings.
Here's the path QM->QM in procurement->Define certificate processing. For the certificate type(which you have assigned to the material) select the appropriate value.
Hope this helps.
Award me the points if this info is helpful
Prakash

Inspection lot for external service

Hi Gajesh/ Sujit/shyamal/ all
we are planning to use service master for external vendor's service, i have couple of questions
please share your experience, if anyone of you come across this kind of requirement
1. is it possible to create an inspection lot for external service?
2. we want to capture / validate the vendor's external service, weather it is accepted or not? sometime we need to enter quantitative value also
3. is there any setting or config for assign /create inspection lot for service master?
what I know is without material master we cannot create inspection lot but i don't know about service master.
thanks
Sami

Gajesh,
thanks for quick response.
2 business req. are as follows
1. vendror is performing periodic service, MM side external service order (service contract/PO)created, bsaed on thatPO vendors performing service.
service entry sheet they are capturing man hours and date of service.
business wants quality of service to be captured in QM inspectiion lot.
2. production order ---> routing -- operation ---> vendor & service PO number assigned external work --> now inspetion lot will be created for that material/production order.
how can we link service master, service entry sheet and inspection lot?
how to map for this req.?
again is't possible to create inspection lot for service master?(without material master)if your answer is yes, then where/how can we assign inspection type ? which inspection type?
thanks
Sami

Windows 2003 Server Service Pack 2 for product version 4.0.1.0.03

Hi Experts,
A customer wants to know if there Are any known issues with applying Windows 2003 Server Service Pack 2 for product version 4.0.1.0.03 .
i gave him the answer that SP2 is not tested for that version hence it is not supprted. So he now asks me if Windows 2003 Server Service Pack 1 is supported for 4.0.1.0.03 , Any input would be of great help.

Hi,
Be careful when you say SP2 is not supported.
Hyperion s policy in terms of third party products was the following (I would imagine this should remain the same with Oracle, however you may want to check with your local support team):
Hyperion products are tested against the versions specified in the product matrices. They do not actively look for issues in maintenance releases or service pack upgrades from 3rd party vendors for obvious reasons (there would be far too many). They will investigate any maintenance release or service pack upgrades as long as the vendor confirms backward compatibility.
Therefore SP2 would be supported with 4.0.1 and Hyperion/Oracle should investigate any issues you may encounter.
However keep in mind that if a specific issue you have encountered in 4.0.1 is caused by SP2 but fixed in a later version then Oracle's recommendation will be to upgrade.
So its a catch 22 situation really.
Personally I would take this opportunity to recommend an upgrade to 9.3.1 ;-)
Hope this helps.
Seb

How to create an inspection lot for each line item of the Purchase order?

Hi,
How to create an inspection lot for each line item of the Purchase order ?
In detail if possible.

Hi
please check this
[thread|Create Inspection Lot;

MFPR - Processing Inspection Lots for Production versions issue

Similar Messages

Maybe you are looking for