MG5550 printer stopped working after firmware update!!!

My MG5550 is only a couple of weeks old and has been working perfectly up until now.   I got a couple of reminders to up date the firmware to the latest version.
I followed the instructions and the down load completed and I got a message saying update successful but when I tried to print a document in my useual way it refused to print.   No error message was shown on the printer.  I rebooted both printer and laptop a couple of times but to no avail.
Got couple of messages on laptop saying 'printer busy' and 'no communication with printer'.
I'm useing Win 7, connection is via WIFI, printer firmware is now 3.080
Help please I urgently need to print some docs.

It seem to have sorted itself out.    When it I could not get it to work I eventually gave up in disgussed.   To my surprise when I switched it on a couple of days later, it printed the page I was attepting to print and since then it has been OK.   No sure what happened to fix it may have been something to do with a reboot.
I dont think this printer is as good as my previous Canon 4300 but having the scanner/copier on board is really useful.   Find the paper feed is not very reliable where as the 4300 never ever missed a sheet.

Similar Messages

  • N95 Map stop working after firmware update

    I have the N95, just update the firmware with the latest (04/25/09), the map App stop working today… it work after the update… it will not load and when I try to reload the map to the phone via Map loader it sees the phone the says it can’t read the license information…
    Need help please.

    have u tried reinstalling the maps application?
    u can get the latest maps application update from http://www.nokia.com/maps
    download the application associated with ur n95 and install it using the pc suite application
    if my post helped u out, please click the Star next to it to add some KUDOS to my name

  • Media Key stop working after firmware update on 55...

    The media key was working before the upgrade.  After I upgraded the firmware, it stopped working.
    My phone info:
    5530
    software version: v 11.0.054
    customer version: 11.0.054.207.02
    language set:25
    Type: rm-504 
    latest update: 10/21/2009 

    "The media key was working before the upgrade.  After I upgraded the firmware, it stopped working.
    My phone info:
    5530
    software version: v 11.0.054
    customer version: 11.0.054.207.02
    language set:25
    Type: rm-504 
    latest update: 10/21/2009" 
    Did you update using NSU? I have updated mine recently and I have v11.0.054 with custom version 11.0.054.C02.01, language set:22.. and my media key is still working.  Am I missing some updates? Nokia Software Update checker says theres is no update yet.
    Message Edited by RhomANZ2 on 30-Oct-2009 03:53 AM
    Nokia 5530 Xpress Music
    v11.0.054
    "How We Respond Is Who We Are..."

  • Expantion module stopped working after firmware update to uc520

    I have recently upgraded my UC520 to software pack 8.2, and since then, the expansion module(7916 24 key) connected to the Cisco IP phone 7965 has stopped working. It just has the Cisco logo and all buttons are lit orange.  I have already tried to reflash the software(ensureing to select support for all phones and the expansion module), clearing all settings, deleteing the phone that its attached to in the CCA, rebooted phone several times, removed expansion copletly and reinstalled.  Any idea what may of caused this or how to resolve the issue?

    zap pram and do a reset of nvram and all in open firmware. Also reset the power manager.
    if you don't know how to do it then do a search as Apple's Support site.

  • My wifi stopped working after a update last year and I have updated since, can this be fixe

    MMy wi fi stopped working after a update early last year and I have just made do since then by using i pad at home. I was going to upgrade my phone but need to clarify if it was the upgrade that broke my wifi and can it be fixed? I have heaed of Apple replacing phones affected by this problem. Please help

    Try the suggestions here to see if they resolve your problem:
    http://support.apple.com/kb/ts1559
    If those solutions don't work your iPhone 4s has developed a hardware problem. The permanent solution is to get it replaced. I have not heard of Apple replacing long out of warranty iPhones.
    You can search the internet for heating and freezing solutions that might work (at least for a while).
    For example, see here: https://www.youtube.com/watch?v=nj10bz5bI6A

  • BoardMaker plus 6 stopped working after OS update

    My Boardmaker Plus stopped working after I update my system to OSi Yosemite.  The disk just spins and spins and the program does not come up?  Is anyone else having this problem?  How can I fix it.  I need to use the program for work.

    I was worried about this, I still haven't upgraded. But while doing research I saw that there is now an online version, I wonder if it's the same ...

  • I have a brand new iphone 5 it just stopped working after i updated to the 7.6 help?

    i have a brand new iphone 5 it just stopped working after i updated to the 7.6 help?

    Connect it to iTunes on your computer and Restore it. See: http://support.apple.com/kb/HT1808

  • Adobe Pdf Printer stopped working after update to Acrobat DC

    Hello, I have installed Acrobat DC yesterday. Since then, Adobe Pdf Printer stopped working. It always gets stuck at Checking Fonts and any software the print originated from just hangs and I have to force it closed.
    I tried uninstalling the printer and installing it manually, repairing Acrobat installation but nothing changed.
    So, can somebody help me? Thanks.

    A method which is written here not working - because if you start to remove the fonts one by other you will see that the list does not end there.
    I did so
    1. i copied the folder with the fonts from the other clean system and replace with fonts in my system
    2. then i restore the registry tree HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Fonts
    3. i check system with sfc /scannow
    after these procedures Distiller DC continue to crash...
    In this time distiller crashed when it cheking their fonts in C:\Program Files(x86)\Adobe\Acrobat DC\Resources\Font
    after i rename the folder from Font to Font_ in order to he did not check this folder
    at next run Distiller crashed at the font wingding.ttf after remowing that font he crash at Vrinda.ttf (this is a oficial font of Win7 and come with him) after removing that font distiller crash at the next font name of Vani.ttf (this is a Win7 font too) - when i saw it goes on forever i back my system to normal status and uninstal Acrobat DC and back to Acrobat XI...this version work with out any problems.
    We are waiting a hotfix to resolving this problem with Acrobat DC

  • Epson printer stopped working after yosemite

    All of a sudden, after Apple autoupdate installed yosemite update and new epson drivers, my printer will only print first line of a document.
    I've tried deleting and reinstalling printer, repairing and verifying drive, deleting printer library files, unplugging, rebooting... nothing is working. Does anyone have a solution for me? Help!

    My Epson WF-4360 "lost it's mind" after being accidentally unplugged for most of a day.
    The printer DID work from Yosemite both before and after the "loss of power"
    The printer DID work from iOS before the loss of power ... but stopped working after that
    ALL the printer status reported to be fine -- showed the wi-fi network address and connection ... but was NOT discoverable from iOS
    This fix resolved the issue:
    Find the wi-fi IP address of the printer -- either from the printer or the network (mine was a local IP ... 10.0.1.n)
    Go to Safari on the iOS device -- enter the IP address of the printer
    Scroll down to the BASIC SETTINGS on the left side menu
    Scroll down to the AirPrint Setup button ... click to start
    Click OK -- to advance through the menus ... two separate browser pages for me
    You will see AirPrint "Setup Complete"
    From iOS ... the printer is now discoverable.

  • My Ipod touch email stopped working after installing Update

    my Ipod touch email stopped working after installing the latest firmware update from Apple what should I do?

    Hi, jewlssch. 
    Thank you for visiting Apple Support Communities.
    If the Mail application will not launch, I would recommend processing any available updates on your Mac Pro and test launching Mail.  If the issue persists, process a reinstall of Mavericks.
    Reinstall OS X
    http://support.apple.com/kb/PH10763
    Make sure to backup all of your data prior to reinstalling OS X 10.9.
    Back up your Mac
    http://support.apple.com/kb/PH11371
    Cheers,
    Jason

  • HT4650 My keyboard has stopped working after an update of Flash Player.  Help! What can I do?

    Why has my keyboard stopped working after Flash Player update?

    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    Do things work in Safe Mode?

  • HP photosmart printer stopped working after 10.4.9 update - Genericclass

    We have an old hp photosmart 1218 that has been printing from our iMac for the last 6 months. I wanted to update the drivers (first mistake) due to some color problems which I did right around the same time that the software updated to 10.4.9. Now it won't print and we get GenericClass: waiting for device. We have spent 3 days trying everything that we could find on the boards. It seems many folks have problems with HP drivers particularly during an OS update. Of course Apple won't support us since the printer is old, and HP says that it isn't supported. But it worked on 10.4.8!
    Here are the references to everything we've tried:
    1. Printer is setup via the Options/More Printers button so it does have a URI
    2. Tried killing the HP Communications process - interesting effect - the system would pick a random page, say it was completed and finish the job. http://software-robotics.com/graphic-design-prepress/viewtopic.php?t=727
    No printout, however.
    3. Tried opening the printer setup utility with Rosetta per spybrook's advice at: http://discussions.apple.com/thread.jspa?threadID=327725&start=15&tstart=0 Still get the genericclass error.
    4. Tried moving the printer to a PC and print through the network but that is another headache altogether so nevermind that!
    5. Deleted everything that said HP or photosmart and uninstalled numerous times.
    We are at wits end and since I did this on my husband's work computer, I am way in the dog house! Any further advice would be appreciated. Oh, and several glasses of wine have also be tried to no avail, though we didn't care nearly as much afterward!
    iMac   Mac OS X (10.4.9)   HP Photosmart Printer genericclass
    iMac   Mac OS X (10.4.9)  

    For the benefit of all those old HP printer users, I will list what I did that seemed to fix my problem. I wish it were more scientific to tell you exactly, but after 40 hours or so of messing with this, I was getting sloppy and losing hope. We actually went out looking at new printers today....
    But, tonight, from a fresh reboot, I left the HP drivers on the Mac (accidentally). I downloaded both SP Ghostscript 7.07.1 and the hpijs-foomatic package found at http://www.linux-foundation.org/en/OpenPrinting/MacOSX/hpijs When I went to set up the printer, my Photosmart was in the list on the setup utility for the first time. I had great hope.... but then received the genericclass hang when printing again. sigh. I logged in and out, but still the same hang.
    But, I noticed that the HP drivers were still installed and thought that maybe there was a conflict between the two so I tried the HP unstaller but it hung. So I reinstalled the HP drivers, then noticed there was an update so I downloaded it and walked through the setup with the photosmart again. My 1218 printer was now on the More Printers list (without having to hold down Options Advanced sequence) so I selected it, tried a print run, and voila! It worked.
    I'm not sure which combination worked whether the update from HP, the generic linux drivers, or both, but I don't dare touch it now.
    Thanks, Greg, for your suggestions!
    iMac   Mac OS X (10.4.9)  
    iMac   Mac OS X (10.4.9)  

  • Why won't air print wont work after ios6 update on iphone?

    It was working before I updated....my printer is KodakEPS2170

    I had the same issue.  BTW, that troubleshooting assistant is worthless.  I did 2 things to get it working.  I'm not sure if one or the other fixed it or it was combination of both.  I had the "No Air Printers Found" and did the usual rebooting everything, firmware updates, etc.  I could print and scan from the epson app fine.  I downloaded the epson airprint app from the app store (It's called Epson Printer Finder) and verified my settings under the Airprint section and choose to save the settings.  I didn't change anything, just looked at the settings.  I also setup the epson connect feature on the printer.  After I did both of those I went into mail and tried to print an email message and all of a sudden I could see my printer.  It's worked perfect since then.  I hope this helps someone.

  • Airport no longer working after firmware update

    Before i get to my question, i think that it is necessary to give a bit of background as to why i have set my network up the way i have.
    I recently moved in with my girlfriend and brought my broadband package with me as i would have to pay a fee to cancel my contract within the contract period.
    This would be all well and good except that in the new location, the service provider can only supply broadband via an ADSL phone line (provided by a seperate telephone company) furthermore they (Virgin Media - i'm gonna name names) provide a cheap USB only modem - which in turn is only compatible with PPC Macs.
    Fine for me, but not so great for my girlfriend who has an Intel Mac Mini and not so great for my new Airport Extreme which of course requires a modem with an ethernet connection.
    Bearing in mind that it's just after Christmas and i can't afford to just run out and buy an ethernet modem or change my ISP - i thought that i would try something out.
    With the USB modem connected to my old PPC G4 i then connected the ethernet cable (that i had connecting our two Macs allowing them to share the internet connection) - from my G4 to the WAN port on the Airport...
    Now i'm a real networking newbie so i was a little suprised when suddenly and effortlessly i had created a wireless network that the Mac Mini and our iPod Touches could see and use. I set up security etc and all was well and good...for two days.
    Then Airport received a firmware update and now it doesn't work and resetting the Airport doesn't help.
    So now i have to get my hands dirty and like i say, i know jack about networks or the terminology.
    With this configuration - and obviously we know that it can work (somehow!)
    should i be in bridge mode or sharing a single IP address? and just how am i connecting to the internet. Static IP address/DHCP - PPPoE? I know what these abbreviations stand for but i don't know what they mean.
    In the course of 'playing around' with the settings i have seen a message saying that Airport has an invalid I.P. address - why is it invalid and is that only because of something that i have changed or is that the route of the problem?
    All the machines can see each other and the only clue i can provide is this log extract.
    Jan 19 01:05:31 Severity:5 Initialized (firmware 7.2.1).
    Jan 19 01:05:34 Severity:5 Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
    Jan 19 01:05:34 Severity:3 No Address for NTP server time.apple.com.
    Jan 19 01:05:34 Severity:5 Rotated TKIP group key.
    Jan 19 01:05:42 Severity:5 (WAN) link state is Up.
    Jan 19 01:05:49 Severity:3 No Address for NTP server time.apple.com.
    Jan 19 01:05:54 Severity:5 Associated with station 00:1d:4f:e3:87:17
    Jan 19 01:05:54 Severity:5 Installed unicast CCMP key for supplicant 00:1d:4f:e3:87:17
    Jan 19 01:06:04 Severity:3 No Address for NTP server time.apple.com.
    Jan 19 01:06:19 Severity:3 No Address for NTP server time.apple.com.
    Jan 19 01:06:19 Severity:5 Connection accepted from fe80::203:93ff:fe77:a4b0%vlan1/49186.
    Jan 19 01:06:34 Severity:3 No Address for NTP server time.apple.com.
    Jan 19 01:06:49 Severity:3 No Address for NTP server time.apple.com.
    Jan 19 01:07:04 Severity:3 No Address for NTP server time.apple.com.
    Jan 19 01:07:08 Severity:5 Connection accepted from fe80::203:93ff:fe77:a4b0%vlan1/49187.
    Jan 19 01:07:09 Severity:5 Configuration updated.
    Jan 19 01:07:09 Severity:5 unloading current configuration.
    Jan 19 01:07:17 Severity:5 Deauthenticating with station
    ...and so on.
    I'm hoping that some networking guru is reading this and can provide me with a few pointers.
    Can anyone help? I've been struggling with this for days now.
    Thanks in advance.
    Steve.

    Your setup is convoluted, but it should work. A few comments:
    1. The base station should be configured to get an IP address using DHCP, which it will get from your PPC which (with internet connection sharing turned on) is now acting as a DHCP server.
    2. The base station should be configured in bridge mode, since your PPC (with intenet connection sharing turned on) is now acting as a router.
    3. I suggest you should turn off the network firewall on the PPC as long as your are running this sort of setup. Not ideal, but it will prevent all sorts of connectivity problems between the internet and everything downstream of your PPC's ethernet port.

  • N73: restore doesn't work after firmware update

    Hello!
    I just made a firmware update to my N73 with NSU, and the procedure completed with no errors.
    Just before the update I made a backup with the application in the phone menu; the app wrote a backup.arc file in the MMC.
    After the update I tried to restore the backup via the same app.
    Here's the problem: the app seems to work (but the "restore" lasts just 1-2 seconds), the phone reboots, but nothing is restored.
    Googleing aroung I found a solution: buy the Noki 1.7 software, extract SMS, contacts and files from the backup.arc, and put everything back on the phone...
    Is there another solution that doesn't involve buying this 3rd party software?
    TIA

    The phone is working well...
    I have been searching in internet, and there'a a lot of people with the same problem. Everybody tells to use PC Suite to backup... if I only knew before.

Maybe you are looking for