MG6220 now defaults to 2-sided copy setting

My PIXMA MG6220 has suddenly decided to always default to a copy setting of 2-sided after working normally for years. This only affects manual copying. Printing from the computer works OK and correctly uses the computer-set defaults. Before doing a manual copy, I can manually set the settings on the printer to 1-sided and it works correctly, but as with other print settings (like paper size, etc.), it reverts back when the stop or home button is pressed. I have tried unplugging and plugging the printer back in, no luck. The default copy print setting of 2-sided is still present. Is there a way to force the default copy settings in the printer? Thanks for any help.
Jim
Solved!
Go to Solution.

Hi Jwpottberg,
We can reset the printer back to its default settings to try and get the copy settings to revert to single-sided printing as a default. To do this, please follow these steps:
1. Make sure that the machine is turned on.
2. Select Setup on the HOME screen.
3. Select Device settings, then touch the OK button. The Device settings screen is displayed.
4. Use the button to select the Reset setting, then touch the OK button.
5. Use the button to select the Settings Only setting, then touch the OK button.
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

Upgrade to Firefox now defaults to a proxy server setting - how do I stop this???

I use Windows XP and Earthlink is my internet provider. About a week ago I downloaded the upgrade to Firefox. Since that time, everytime I connect to the internet I get the error that Firefox is trying to connect thru a proxy server - I do NOT work thru a proxy server. I have to go into internet options in my control panel, go to connections and remove the proxy server checks in both the dial-up settings and the LAN settings. THIS DID NOT NEED TO BE DONE PRIOR TO THE UPGRADE!! I tried to go back in my computer settings to a date prior to the upgrade, but that did not change anything. HELP!! What can I do to stop Firefox from defaulting to a proxy server setting???? Earthlink tells me that this is not an Earthlink problem, that it is being caused by the Firefox explorer.

You can find the connection settings in Tools > Options > Advanced : Network : Connection<br />
If you do not need to use a proxy to connect to internet then select "No Proxy"
See "Firefox connection settings":
* [[Firefox cannot load websites but other programs can]]

Cannot get the copy setting to change from two-sided to one-sided on my officejet pro 8615

My copy setting on my printer (HP Officejet Pro 8615) all-in-one shows
Two Sided 1:1
When I tab over to where the 1-sided original and 1-sided original copy & 1-sided original and 2-sided copy can be selected, the blue light is on 1-sided original and 1-sided copy. It will not change to the One sided 1:1. The printer will print one side and asks you to flip over to side 2. As a result, I cannot print anything. Please help

Hi @Granniej60
It sounds like we may need to select the option you want in the copy menu then select it as a default. To make sure I understand though, you are unable to select the 1 sided original : 2 sided copy, or you have selected it and it is not working?
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

(HP Officejet pro8620) on a mac book pro, set default to single sided printing

Can anyone assist. I have found out how to switch off the 2 sided printing on a job by job basis, but I want single sided as a default.

Hi DF99,
I am not sure why yours is defaulting to two-sided printing.
Open Text Edit from Applications.
Go to File, Print, click on the drop down and select Layout.
Uncheck the two-sided feature.
Then click on Presets near the top.
Select save as and provide a new name.
Type something in Text Edit and try printing it.
Then close and reopen Text Edit again, it should default to last preset that we made and printed to.
Try printing again to see if that worked.
If the doesn't work, select Standard from the Preset and check under Layout to see if the two-sided is checked or not.
Try printing again, if it is showing the one sided.
Let me know.
If the issue persists, delete and add the printer driver back in again from Printers and Scanners.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Acrobat Reader 8 Will Not Default to Double Sided / Duplex Printing In Linux

Acrobat Reader for Linux 8.1.2 seems to always default to single sided printing regardless of the system default. In order to save trees, toner, the environment and money, it would be nice if it would default to the system's default.
> The default printing command is something like:
> lpr -P printer_name -o InputSlot=Middle -o OutputBin=PrinterDefault -o Resolution=300x300dpi -o PageSize=Letter -o Duplex=None
> Requiring the user to select double sided printing every time they print. This changes the command to:
> lpr ... Duplex=DuplexNoTumble
> It would be nice if the default setting was:
> lpr ... Duplex=PrinterDefault
> So that users could still choose but platform administrators could set the default in /etc/cups/lpoptions Unfortunately, most people will simply not print double-sided unless its the default.

Oops, sorry this is a duplicate of the following issue: http://www.adobeforums.com/webx/.3c034728/5

Can I delete my music on my Macbook air now that I have time machine set up?

I cannot see the music files on the time machine. Can I delete my music on my Macbook air now that I have time machine set up to an external hard drive?

The Time Capsule is for your Time Machine backups, not "everyday" files. .
If you delete the music files on your MacBook Air.....there are a number of negative things that can occur.
1) The only copy of your music will be on the Time Capsule. When....not if....the Time Capsule has a problem, you will lose your music files, since you have no backup for them. In other words, you always need at least two copies of your important files on two separate drives.
2) Time Machine backs up the changes that occur on your MacBook Air. If you delete the music files from the MacBook Air, at some point Time Machine will also delete them from the Time Capsule.....and there is no way to know when this might occur.
A better plan to consider might be to add a USB or FireWire drive and connect it directly to your MacBook Air. Move the music files over to that drive.
Then, Time Machine will back up both your MacBook Air and the attached hard drive. So, you have an "original" copy of your data on one drive and a backup copy of the same data on the Time Capsule. That would be a minimum backup plan.

Hi! This might be a stupid question, but I just bought an IPod G5 60 GB. When you firstconnect your IPod you have to setup your ID. I'm using my brothers computer, who has an IPod too, so now I'm wondering when I set up my ID with his Itunes does his Ip

Hi!
This might be a stupid question, but I just bought an IPod G5 60 GB. When you firstconnect your IPod you have to setup your ID. I'm using my brothers computer, who has an IPod too, so now I'm wondering when I set up my ID with his Itunes does his Ipod still work with it??? Or would his ITunes just see my IPod? Or does his Ipod ID change to my ID?
Or does it work without any problems, to setup two IDs on the same computer??
Thanks!

Hi!
This might be a stupid question, but I just bought an IPod G5 60 GB. When you firstconnect your IPod you have to setup your ID. I'm using my brothers computer, who has an IPod too, so now I'm wondering when I set up my ID with his Itunes does his Ipod still work with it??? Or would his ITunes just see my IPod? Or does his Ipod ID change to my ID?
Or does it work without any problems, to setup two IDs on the same computer??
Thanks!

XML PUBLISHER ERROR :Environment will now switch to UTF-8 code-set.

Hello ,
I have developed a new XML Publisher report and when I submit request that is coming as Completed Warning Status and the Log file is given Below.
When I consulted My DBA , he told me everything is fine and it is problem either in template file or rdf
I dont know what to do
Can anyone tell me what is the wrong in the following log file
AAB Custom Application: Version : UNKNOWN
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XXCRCNTRT module: AAB RAC Contracted vehicles
Current system time is 06-MAY-2009 09:43:37
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_CUSTOMER='2154'
Environment will now switch to UTF-8 code-set.
Parts of this log file may not display correctly
as a result. This is an expected behavior.
XML_REPORTS_XENVIRONMENT is :
/f03/applstgd/stageora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /f03/applstgd/stageora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
Report Builder: Release 6.0.8.27.0 - Production on Wed May 6 09:43:42 2009
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 8923141 on node STAGEDB at 06-MAY-2009 09:43:52.
Post-processing of request 8923141 failed at 06-MAY-2009 09:44:18 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
------------- 2) PRINT -------------
Not printing the output of this request because post-processing failed.
Finished executing request completion options.
Concurrent request completed
Current system time is 06-MAY-2009 09:44:19
Thanks and Regards
Sunil Dutt .S

The problem was solved as there is a problem in the formatting of template

I formatted my desktop. and now i have a fresh copy of firefox on my desktop. How can i use firefox sync to get all my history, passwords and add-ons

I have a firefox sync account. I used to sync all my information and save it to Firefox server. Because of some reason i have to format my system and now i have a fresh copy of Firefox installed. Now i want to use sync to restore all my password,history related details.

Duplicate of [https://support.mozilla.org/en-US/questions/934093 https://support.mozilla.org/en-US/questions/934093]

I installed two OS in Macpro-Lion and Win7, but I only can select Lion as the default system in the reference setting, how to find icon of win7 in reference setting again?

As captioned, I installed Lion first and then set up the win7 with bootcamp. At the beginning, the defualt system is Win7, I changed as the Lion as the default system in system reference setting. The procedure as follows:
1. Click the system reference setting
2. In the system tool select "Boot Disk", but I only find Macintosh HD Max OS 10.7, no icon for windows 7.
The point is that if I want to change the win7 as the default boot system, what I can do since no icon for selection.

Hi,
When you power on your MacBook, hold down the Alt key and you will be given the option of which OS you want to boot into.
Regards

Unable to print 2 sided copy from mac and from hp printer

Im unable to make 2 sided copies on the flat bed and from printing from my macbook. First I tried printing on flatbed of hp printer I selected 1-2 sided copy I put down 1st page to copy then an error message "Job canceled the selected paper or tray cannot be used for copying on both sides of page:Job canceled". Then I tried printing from my mac on printer settings I selected 2 sided printer and still the pages printed one by one (not 2-sided copies). I dont know what else I can try maybe theres something Im missing it shouldnt be this difficult to print the 2sided option.

Hi wbclemen,
Follow the steps in the document below, and let me know what you find out?
Troubleshooting Print Quality Issues
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

The programs open tab ( list of programs open on comp) is always popping up on middle of screen whenever I go near the mouse. HELP!!! Have turned it off recently and moved it, a mac mini, now on new plug in and set up it now does it.

The programs open tab ( list of programs open on comp) is always popping up on middle of screen whenever I go near the mouse. HELP!!! Have turned it off recently and moved it, a mac mini, now on new plug in and set up it now does it.
Yes I have turned it off and restarted it, ubnplugged mouse and plugged it back in.
Have not updated it in a little bit
running mavericks, which I dislike.10.9.1
This is a new problem,
Why where and what do I need to do to fix it? Please.
Thanks for your help community, You guys are awesome, better than the guys n girls at Apple!!
I have also noticed the drop down menu arrow on Numbers Tabs has dissappeared since move.
you know the invisible arrow that appears in the additional tabs pages in "Numbers program"
Especially an inconvenient for previous Numbers users as you all know.
any word on New Numbers Tutes at all??
You'd think with a Billion dollars they could make a 10 min clip saying here are changes guys, go enjoy new layout..... Just saying... not.
anyway Hi and any help out there tonight is GREATLY APPRECIATED.
Cheers Jason.

If the reset doesn't work:
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...
Note: Data will be lost

Mail doesn't send e-mail. Before yesterday everything was ok, but now it says that a copy of the message has been sent to "Sending messages" because the contents of the message cannot be send to server. What to do? IMAP should be ok.

Mail doesn't send e-mail. Before yesterday everything was ok, but now it says that a copy of the message has been added to "sending messages and the content of the message cannot be sent to the server". All the data in IMAP is ok. What to do?

thanks for replying!
When sending from one mac email account to another email account on the mac it seems to send fine, and it moves to the sent items, but nothing appears in the mac inbox.
When sending from a mac account to the pc, it seems to send fine, and it moves to the sent items, but nothing appear in the PC inbox.
When sending a massage from the PC to my mac email, it send fine from the PC and arrives in the inbox on the mac.
mac to mac - seems to send but dosent arrive
mac to pc - seems to send but doesnt arrive
pc to mac - seems to send and arrives.
As i said it was all working fine yesterday and for four years previous to that, but now it has just stopped.
I hope you can help.

Problem with automatic 2 sided copying

I'm not able to copy documents 2 sided automatically. All settings are true but it copies just one side. In order to copy 2 sided, I have to do it manually.

Hi,
Do you try copying a two sided original?
The printer only support two sided printing, it does not support 2 sided copying of an original (aka. ADF Duplexing)
Please clarify what happens of I may misunderstood your intention.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Exchange server OWA athentication Error " You must set a default domain if LogonFormat is set to UserName"

I Have windows 2012 DC installed and This is a production server, I know that Its not recommended to install exchange server on the DC. I had to do it because of management instructions.
I have tried to install the exchange 2013 and received many errors at the time of installations and then finally I changed the path for installation to D drive. its installed successfully.
The issue is its not opening the OWA or ECP.
The owa virtual directory got deleted as part of troubleshooting to recreate it. but after that its not creating, I reset the iis and created the virtual drive for owa from the iis console but not through powershell and then i thought to install the SP1
so that it can be fixed.
At the time of installation client access front end service role ..it gives error
Error:
The following error was generated when "$error.Clear();
          $FEOWAVdirIdentity = $RoleNetBIOSName + "\OWA (Default Web Site)";
          $FEOWAVdir = get-OwaVirtualDirectory -Identity $FEOWAVdirIdentity -DomainController $RoleDomainController;
          if ($FEOWAVdir -ne $null)
            Set-OwaVirtualDirectory -Identity $FEOWAVdir.Identity -ExternalUrl $FEOWAVdir.ExternalUrl -InternalUrl $FEOWAVdir.InternalUrl -ExternalAuthenticationMethods $FEOWAVdir.ExternalAuthenticationMethods
-BasicAuthentication ([Convert]::ToBoolean($FEOWAVdir.BasicAuthentication)) -WindowsAuthentication ([Convert]::ToBoolean($FEOWAVdir.WindowsAuthentication)) -DigestAuthentication ([Convert]::ToBoolean($FEOWAVdir.DigestAuthentication)) -FormsAuthentication ([Convert]::ToBoolean($FEOWAVdir.FormsAuthentication))
-LiveIdAuthentication ([Convert]::ToBoolean($FEOWAVdir.LiveIdAuthentication)) -OAuthAuthentication ([Convert]::ToBoolean($FEOWAVdir.OAuthAuthentication));
        " was run: "You must set a default domain if LogonFormat is set to UserName.".

Hi Mohammed,
I have run into this same problem and below is the fix.
Run below command to see the logon format
Get-OwaVirtualDirectory -Identity "owa (Default Web Site)"|fl name,server,*auth*,*logon*,*domain*
Look for LogonFormat values
LogonFormat : UserName- (Wrong One)
LogonFormat : Domain - (Correct one)
If you find the first one (Wrong One) then i would suggest you to run the below command to change the log on format to domain which will solve your problem
Set-OwaVirtualDirectory -Identity "owa (Default Web Site)" -LogonFormat FullDomain
Cheers !!
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you

MG6220 now defaults to 2-sided copy setting

Similar Messages

Maybe you are looking for