MG7120 turns off by itself with eco setting to "never"

It copies, scans, prints, and prints wirelessly when it's on. I have the Eco setting to never turn off but it turns off by itself. Also, when I press the power button to get it back on, I always get a message that says I turned it off incorrectly...but I didn't turn it off at all.
Any suggestions? I love this printer!

Hi Sherman,
To determine if the printer is entering a "sleep" mode or actually losing power, the next time the printer appears off, press any button except the Power button to wake the device.  If it does not respond, then the printer is losing power (not entering a sleep mode).
At that point, I recommend contacting us for you service options.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

  • My iPhone randomly turns off by itself with battery remaining. I can turn on the iPhone by hard restart. But sometimes it turns on at fifth, sixth, or more try. did anyone have this problem? and how can I fix it?

    My iPhone randomly turns off by itself with battery remaining. I can turn it on the by hard restart. But sometimes it turns on at fifth, sixth, or more try. did anyone have this problem? and how can I fix it?

    When my phone was off it wouldn't connect to iTunes, i got it working now though. I just had to hold my lock button and my home button down long enough. Thanks anyways though!

  • HDX18 turns OFF by itself with Loud Pop

    Just need to vent and express my dissatisfaction with HP as well as share my story with others who might be having similar issues.
    I have seen a lot of issues on these boards regarding heating issues with peoples laptops, especially when gaming. I just had to write about my experience with HP and my HDX18.
    I am not sure my core problem is a heating issue, though the laptop does get beyond reasonable heat levels.
    My fan, ports and the area around it is clean. My laptop sits up and has ventilation underneath and completely around it . Still normal running temperature on this machine is around 130F with a 0-10% load. When I do anything on it the temperature shoots up and I have seen it get over 200F. Regardless of the temperature, the laptop shuts off with a loud popping sound intermittently. Mainly when I load up or during play of World of Warcraft. Any high graphics increases the heat considerably. But regardless of the current temperature it has shut off just loading the game. I think there is some issue with the graphics card but of course any contact with HP is like hitting your head against a brick wall. I even tried to get the information on who is a certified repair center for HP (without sending it directly to HP) and the rep couldnt help. Also on a side note I did have it in to HP repair under warranty in the first few months I owned it for an audio quicklink issue. The audio was popping and adjusting itself on my screen by itself. They fixed that issue by disabling the feature all together.
    If anyone has had are is having similar issues I would like to hear what you have done to try to resolve or if you have resolved the issue.
    I'm at the point of purchasing a new Dell and saying goodbye to HP forever.

    Here's the solution.  Get your GPU reballed (not reflow).  Those solder connections and solder material is crappy.  It needs to be replaced with a material that can withstand the heat from the GPU without deforming.
    I have a HDX18T-CTO1200.  I had that problem as well.  I played Starcraft II, Crysis 2, Bioshock 2, etc.. over a year ago and remember the computer would get hot.  About 2-3 months ago, I started experiencing the random shutdowns.  Got it reballed and received my comp about 1 week ago and no problems.

  • I am having trouble with my i pad it freezes it turns off by itself and the screen turns blue?

    I am having trouble with my i pad it freezes and it turns off by itselfI and screen turns blue?

    Start by rebooting the iPad by holding both the power and home buttons until the apple logo appears and it restart, ignoring the red slider if that appears.  See if that helps.

  • My mac pro suddenly turned off by itself, then after 10 minutes it started to work again with "no battery available" icon and an always-running fan!

    My mac pro suddenly turned off by itself, then after 10 minutes it started to work again with "no battery available" icon and an always-running fan!
    it's bugging me since I don't know if it's recharging or not..

    Mine has just done this too.  Did you find out what it was?

  • I just turned on my Apple Macbook pro. Whenever, I turn it on, the progress bar comes with the Apple symbol and after few secs, it turns off by itself. Have tried to turn on the MBP number of times but the same result

    I just turned on my Apple Macbook pro. Whenever, I turn it on, the progress bar comes with the Apple symbol and after few secs, it turns off by itself. Safe mode on start up does not work either...any ideas?

    i tried it with both. i have since tried control+R, (https://discussions.apple.com/thread/3730727?start=0&tstart=0) which appears to be doing something but wont let me repair anything..

  • Laserjet P1102w turns off by itself

    Laserjet P1102w used in wireless mode turns off by itself and I have to unplug power cord and plug back in and turn on printer to print.  Does this printer turn off if not used after a certain time?  Is there a printer setting to eliminate this or is this a faulty printer?

    Hi,
    Please go thru this HP document, this is because the printer go to sleep mode and doesnt come back on again.....
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02860533&cc=us&dlc=en&lc=en&jumpid=reg_r1002_us...
    you can turn off the sleep mode by uncheking Automatically turn off device after inactivity option...
    Although I am an HP employee, I am speaking for myself and not for HP.
    *Say thanks by clicking the "Kudos! Star" which is on the left*
    Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.
    Although I am an HP employee, I am speaking for myself and not for HP.
    *Say thanks by clicking the "Kudos! Star" which is on the left*
    Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

  • Mac pro HDMI video preview goes yellow solid and turns off by itself often

    I work with 2 monitors. main monitor is Apple thunderbolt cinema display 27", and second monitor is LG HD tv connected through HDMI of MacPro.
    when I use aftereffect, I use my LG TV as video preview, and it goes yellow solid and turns off itself very often.
    I use Final Cut Pro X and, davinci 10 lite with LG TV also, but it works well in these condition.
    It makes trouble with aftereffects only.
    I hope it can be solved.
    thank you

    thank you, tim.
    English is not my first language. so I'm not sure I fully understand with this.
    I will show you my full hardware setting
    * Does preview on the LG monitor work at all? When does it go yellow? When does it turn off?
    - it works initially. A few minutes after I start making RAM preview, yellow screen appear(the RAM preview keeps going anyway),
    if I stop the video preview(command + /), and restart video preview, it turns on normal,
    but if I don't stop video preview, 10 or 20 seconds later it turns off by itself, and all the options in 'Output Device' disappear except 'Computer Monitor Only', so I should restart After Effects to turn on video preview.
    * When you have the problem, if you open Activity Monitor, is Adobe QT32 Server running?
    - yes, it(it appears red characters, is it normal?) looks running
    * Do you have Premiere Pro installed? Does it have the same problem when previewing to the LG monitor?
    - no, Premiere Pro works well.
    - I tried to remove Blackmagic Codec.component , but it didn't solve my problem
    let me know if you need more information about this.
    thank you again.

  • I just got an iPhone 5s, and I restored from a previous back up and now I can't restore the phone without "turning off the find my iphone setting"?

    I just got an iPhone 5s, and I restored from a previous back up (mistake) and now I can't restore the phone to start again without "turning off the find my iphone setting" but it's using an old email address as the icloud login, which i don't have a password to / never used for an icloud account. I have gone and changed my settings to a different email on my icloud / apple ID but on my phone it won't let me change the email address for icloud, it's greyed over and keeps trying to verify?

    Welcome to the Apple community.
    If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID.
    This feature has been introduced to make stolen phones useless to those that have stolen them.
    However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
    The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device.
    You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
    This article provides more information about Activation Lock.

  • QUESTION - Has anyone else recently experienced an iPhone or iPad's alarm going off by itself, without being set by the user?

    Has anyone else had his/her phone alarm (on the clock app) go off by itself, without being set, and with a very weird sound?
    Happened to me at 11:34 pm last night (Oct 28, 2013). I'm using an iPhone 5 with iOS 6.  Sound was named something like "Orari" and sounded like a woo-woo ghostly alarm. I immediately swiped to stop the alarm and then deleted the alarm, which I had NOT set, but which seems to have set itself.  The iPhone was plugged into my iMac at the time.  There is no such sound on my phone or, it seems, anywhere (I Googled).
    The night before, Oct 27, something similar happened to my iPad mini running iOS 6 ... also plugged in to recharge, but at a wall socket ... the sound was like a fire or smoke alarm.
    I know it's Halloween week, but some of us need our sleep!
    Any explanations?

    Hi Littleleslie,
    Have you tried resetting the device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Silver Apple appears (up to 30 seconds). Once the Home screen comes up, double tap the Home key and make sure you don't see the Alarm app in the list of background apps. If you do, swipe up on the thumbnail for it to close it out completely.
    Then all you can do is wait to see if it will let you sleep through the night!
    Good luck!
    Cheers,
    GB

  • My iPhone 4s won't turn on, it turned off by itself now it says plug into iTunes? I don't have a computer is this something I can have fixed at the store?

    My iPhone turned off by itself and says to plug into iTunes and won't turn on. Is this something I can have fixed at te store?  I don't have a computer with iTunes..

    You should be able to restore the iPhone, just connect it to the computer and open iTunes.
    Make sure you have the latest version of iTunes installed and take a look at this, if you run in to a problem.

  • My phone just turned off by itself now it wont turn back on, iv conected it to the computer but it still wont show anything on the screen?

    my phone just turned off by itself now it wont turn back on, in connected it to the computer but still nohting happens on the screen?

    Im afraid that my phone might have died ;(   it went off by itself  with no reasons, it wasnt exposed to any liquids or anything, it just went off   This is sad
    I hope there is a solution for this

  • My iphone turned off by itself and it doesn't turn on

    My iphone turned off by itself and it doesn't turn on, What should i do????

    IIf the battery was completely drained it might take some time before the phone will respond. Wait at least 30 minutes with the phone connected to the charger. Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. If the phone starts up let it continue to charge until it's 100%.
    if the broken button will not let you do the reset Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • Airport turns off by itself and won't turn on back again!!!

    hey there, i am currently facing an issue with the airport as by it is turnning off by itself and i cant turn it back on .. i have to restart !!!
    sometimes when i turn on my mac like just now happened it is off and can;t be turned on.
    please if anyone can help i would really appreciate it
    thank you very much

    Hey, in case you haven't been able to find a solution to your original problem with airport turning off, i seem to have found the solution for my MacBook Pro. I called Apple Care and they had me to shut down my computer. Then, while holding down the four keys: command, option, R and P, push the power button to turn on the computer. Do not let up on the four keys until the start up chime has sounded twice. Then let up on the four keys and the OS will boot up as usual. They said what that does is reset your "sleep" parameters on your computer. This seemed to have solved my problem.

  • Turns off by itself w/ and w/o adapter

    My MacBook Pro has been turning off by itself. Even if my battery is fully charged or my adapter is plugged in, it some how shuts down. I've checked my sleep and power settings with no avail. It shuts down when I'm surfing the internet, watching a DVD, working on a document, etc.
    I've had my computer for only 3 months and my battery doesn't fall under the range of batteries that need to be replaced.
    Does anyone have any ideas as to whats going on? Do I need to take this to my local Apple Store?
    Thanks!
    Macbook Pro   Mac OS X (10.4.8)   2.16 GHz Intel Core Duo; 2GB, 667MHz DDR2 SDRAM

    I have had my MBP for about 2 weeks and it was having the same problem....I took it to the apple store and they are currently installing a new logic board. I would call support or bring it in to the store and see what they say.

Maybe you are looking for

  • Is there a way to do this in Acrobat?

    I'm hoping this is the right place for this query. We've been asked by a client to provide a pdf document which will comprise two A4 sheets side by side as a double-page spread, therefore making the pdf page an A3. What they want to be able to do fro

  • Hyperlink in the mail body

    I need to put hyperlink in th mail body.I am using the following lines to display the hyperlink........................ <a href = xyz.com > test </a> But the problem is that  instead of displaying the test hyrerlink it is showing me :- <a href = _xyz

  • Difference between ALBPM6.0 studio and ALBPM6.0 Enterprise server

    Difference between ALBPM6.0 studio and ALBPM6.0 Enterprise server.Can anyone help on this. Thanks in advance.

  • Transparent Conky??

    Hello all, I have been using Arch for quite a while now and any problem I have had has been solved by reading this forum or the wiki. Well, I can't find a solution to this problem. I am running KDE with Beryl and Nvidia drivers (from pacman) and Conk

  • Dynamically displaying a label

    I have a form: http://htmldb.oracle.com/pls/otn/f?p=34728:1 My Version is 1.6 When the user select "Destroy Date" or "Created Date" from the 'Column' drop box, I would like to have a "label" show up to the right of the 'Value' box that says: (Format: