MGCP Gateway Change port from POTS to Loop Start

I have an existing MGCP gateway port that I need to change from POTS to Loop start, however I have not seen a setting in UCM that allows me to do this. When I try to delete the port, it ask if I want to delete this gateway and I'm scared that it will blow all my ports away. Does anyone know how to reset this port to the default so I can program loop start or updat the existing port?

Yeah you need to delete the port from the gateway and re-add it to change it. You will need to remove route pattern/route group dependencies in order to delete the port. I recommend you use the Dependency Records to find out what RGs this port is assigned to so that you can add it back in.
If these are FXS ports, I'd actually recommend you keep it at POTS until CM 8.5, though, since LS is the default configuration for the port in IOS, and there is this bug on CM, which isn't fixed until 8.5:
CSCtf22348
MGCP FXS GroundStart and LoopStart need Prefix DN; remove Attendant DN

Similar Messages

Change port from 8443 to 443 on jakarta-tomcat 6

Hi all,
How can I possibly change the SSL port from 8443 to 443? The default was 8443 and it works fine with that.I've tried to set it to port 443 at the connector tag and all redirectPort in server.xml. However, when I tried to access https://localhost/ it shows Page could not be displayed. I am currently running java jdk 1.6 on jakarta-tomcat 6. Is there any additional settings which I've left out? Thanks in advance..

Hi, csyms and welcome to the forums
Download a PDF of the Online Help for Adobe RoboHelp Server 9 and search for the sub heading "Set up Tomcat for HTTPS".
You'll find the PDF here:
http://help.adobe.com/en_US/RoboHelp/9.0/RoboEngine/robohelpserver_9_help.pdf
John Daigle
Adobe Certified RoboHelp and Captivate Instructor
Evergreen, Colorado
www.showmethedemo.com

How to change port from 8080 to 80

Hi i need the help on Oracle 11g which is installed on RHEL5.
I am using apex3.2 , i had tried to change the application port from 8080 to 80 using exec dbms_xdb.sethttpport(80);
But there is no change on that, its not able to load on 80 port.
Please let me know if i am doing wrong
Details as follows
Operating System: RHEL5
RDBMS: Oracle11g
ApEx version: 3.2

Thanks for your reply, i do not have that much of knowledge on linux could you please share your knowledge.
Here i have two users on my server one is root and another one is ipro. i had used ipro to install/configure oracle 11g and apex. As you said ipro user do not have a ownership to start a service on port 80. How can i provide the ownership on port 80 to ipro user.
Thanks and Regards
Maheswara

Change port from 80 to one else

hello there
I'm a programmer and my application need to use of port 80,unfortunatly Skype also used of this port do anyone know what should I do,or any one know can I use another port for my Skype?
Thanks

Tools > Options > Advanced > Connection, set your custom port and remove the 80 and 443 entries.

SJAS not respond when Change port for Derby db

Hi Folks
when I change port from 1527 [because it is used by another protocol] for derby database to 3333 [using derby.drda.portNumber=3333 in /root/.netbeans-derby/derby.property file] I found that SUN APPLICATION server is not responding properly.
NOT responding properly means:
1. I can start it from command line but can't start from Netbeans(exceptions of derby etc)
2. I can not see any page o/p in browser for admin and webserver8080 but ports are used by SUNApplication server (confirm by port scanning)
anyone faced same problem please tell us possible reasons

Hi,
I did the same thing as you have done - changed the port number to 3333, without making any changes manually to the port values for derby in netbeans. After this i started the appserver from netbeans and i was not only able to start derby (in port 3333) but also the application server successfully. I did not get any exceptions whatsoever.
Just curious, which version of app server are you using? Also, did you verify the settings for the application server that you are starting (using netbeans) under Tools->ServerManager ?
I tried this with 9.1UR1 b01. To add to this, i was able to access the admin console and also the 8080 port.
Edited by: mchondria on Oct 9, 2007 5:22 PM
Edited by: mchondria on Oct 9, 2007 5:23 PM

Change names from ECR/ECO system status screen (cc01, cc02)

Hi all,
Im working with ECM main screen (CC01, CC02) and the names assigned in the Standard process are not meeting tour needs and some steps are missing in order to cover all the specifications.
If in a easy way I could change the name of the system status steps ( for instance change Convert ECR into Start modifications) will be great and, if this change could be link to a type of ECR would be like a dream because this will meet all the client requirement.
Any comment or suggestion in how to do that? User status are not valid :S
Many thanks in advance
Alberto

Hi alberto,
I think you can't change it from "Convert ECR" to "Start Modifications" but you can use create your own Statuses as required and can be control through Status Profile where in you define this. and in first screen of CC31 or CC01 you need to make this "Profile" Field as Mandatory.
Change type can also be linked to Profile, this way your client requirement will be fulfiled.
Hope this will solve the problem
Regards
Rehman

How to Change the Default SSH Port from Terminal ?

How to Change the Default SSH Port from Terminal ?

How to Change the Default SSH Port from Terminal ?
now showing default SSH Port 22 i need change it pls help me how can do

How to Change the Default SSH Port from Terminal ? now showing default SSH Port 22 i need change it pls help me how can do

How to Change the Default SSH Port from Terminal ?
now showing default SSH Port 22 i need change it pls help me how can do

How to Change the Default SSH Port from Terminal ?
now showing default SSH Port 22 i need change it pls help me how can do

How do I use pots on my client machine to change values, from the field, on my server machine and all other client machines?

I am using Lookout 4.5, build 12, and I am having a problem concerning pots. I have data tables created for the different size sewer stations my system monitors. For each station, there are setpoints for starting and stopping of the pumps. I want to be able to change the setpoints for a station on the client file using a pot and have it change on all other machines running Lookout. I did this in 3.8 using DDE, but I don't want to use DDE anymore.
I created a pot on the client file and URL'ed it to a pot on the server. On the server I created a table with a generic member "A" named "Lead Setp" and then created a member "A1" named
"C5_1LeadSetp" then a member "A2" named "C3_1LeadSetp" and so on....
In this table I connected the generic member "A" to the Pot I created on the server, and I connected A1 to its corresponding setpoint signal coming in from the field.
On the client file I connected (in the table similar to the one on the server but with all signals for the station) the "A1" member to the setpoint signal coming in from the field, and I connected the "A" member to the Pot I created on the client file which is URL'ed to the pot on the server file.
But, when I change the value of the pot on the client file, only the pot on the server and the "A" member in the table on the server change to the value of the pot on the client. The "A1" member whose screen I am changing the values from on the client does not change! This is the last thing I have to do and my file will be completely converted to 4.0. Does anyone have any ideas?
Thanks for any responses..
GBWY
Jason
Jason Phillips

Hi Jason,
If I understood your task correctly, you want to change the Setpoints on the Server DataTable using Pots from different clients. And also reflect these changes on the clients locally.
You correctly remoted the Pots on the Clients to the corresponding Pots on the Server. However, you do not need tables on your clients. All you need is Expressions on each client to the particular cell of the Clients.
So, to summarize: On the Server, the Pots write to the DataTable. And since the Pots on the Clients are remoted to these Pots on the Server, you can affect any change using these Pots. Because of the common remote source (Server Pots, i.e.) all of these Pots will always be in sync. Finally, to get the Setpoints on the Clients, just insert Expressio
ns to the Server's DataTable.
I am attaching a simple example (exmpl.zip) which does this. There are three processes -- My_Server, My_Client1, and My_Client2. I had them setup on the same machine so the paths are all process relative, but you can always change those to computer relative or absolute and move the client processes to diff machines.
Hope this helps.
Rgds,
Khalid
Attachments:
exmpl.zip ‏12 KB

I am trying to change the tempo of a loop from Garageband.

Hi,
I am trying to change the tempo of a loop from garage band. I have seen video tutorials where people would do this from just below their tabs in their editor. However I cant get that option to come up.
Also, I have tried using the Apple Loop utility, and I can change the BPM at the bottem but then it wont let me save the file.
I would prefer to change the tempo in soundtrack pro but at this point I will try anything.
Thx for listening.

Left pane, Project Tab. Scroll down to the bottom and find tempo and key settings. These will control any loops in your project.

Changing SSH default port from 22 to 8080

Hi all,
I have deployed SSH on my home solaris 10 x86 machine and it was working fine through the default port 23.
But the problem is that i can't connect to it from work as the firewall blocks outgoing SSH traffic. So i want to change the default port from 23 to 8080.
i changed the value of Port in /etc/ssh/sshd_config.
Then i ran the command
/usr/lib/ssh/sshd -f /etc/ssh/sshd_config
because as far as i know from the man pages it will cause the daemon to reread the configuration file thus the new value for port but still it didnt' work.
Also i tried the command
/usr/lib/ssh/sshd -p 8080
but didn't work also
I tried to restart the ssh daemon after both commands but still the same result.
Would anyone please help me with this issue as i still don't have much experience in solaris.
Thanks in advance.

Ok, So i installed lsof, but
When i ran that command i got this output
bash-3.00# lsof -M | grep 8080
sshd 1085 root 3u IPv6 0xd43e21c0 0t0 TCP *:8080 (LISTEN)
it seems that sshd is occupying port 8080 but still ican't login from a remote machine.
When i try it asks me to enter the username and then displays a messaing "Using keyboard-interactive authentication" then asks for password, When i enter the password it gives me "Access denied" although iam sure this is the right password.
When i try to connect to port 22 things go fine and i can login with the same user "root" with no problems (i know accessing remotely using root is not secure but that is not the problem for the moment)
So i did that
ps -ef | grep ssh
root 1085 1 0 19:05:07 ? 0:00 /usr/lib/ssh/sshd
root 1093 1 1 19:05:51 ? 0:00 /usr/local/sbin/sshd
Note that the PID for the process grabbing the port is the same for /usr/lib/ssh/sshd
so is that the ssh daemon or is it /usr/local/sbin/sshd ????
Please advise. Note that iam not experienced in solaris so please take it easy with me.
Thanks

Problem when I tried to change weblogic listen port from 7001 to 80

HI! I have problem when I tried to change weblogic listen port from 7001 to 80. When I changed from 7001 to 7777 then all works ok! But why not on 80? With apache all works ok on 80 too.
I restart my weblogic server and then I have following errors.
<2009.1.4 16:02:13 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to STARTING>
2009.1.4 16:02:14 oracle.as.jmx.framework.PortableMBeanFactory setJMXFrameworkPr
oviderClass
INFO: JMX Portable Framework initialized with platform SPI "class oracle.as.jmx.
framework.wls.spi.JMXFrameworkProviderImpl"
2009.1.4 16:02:15 oracle.adf.share.config.ADFConfigFactory cleanUpApplicationSta
te
INFO: Cleaning up application state
<2009.1.4 16:02:22 EEST> <Notice> <Log Management> <BEA-170027> <The Server has
established connection with the Domain level Diagnostic Service successfully.>
<2009.1.4 16:02:22 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to ADMIN>
<2009.1.4 16:02:22 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to RESUMING>
<2009.1.4 16:02:22 EEST> <Emergency> <Security> <BEA-090087> <Server failed to b
ind to the configured Admin port. The port may already be used by another proces
s.>
<2009.1.4 16:02:22 EEST> <Error> <Server> <BEA-002606> <Unable to create a serve
r socket for listening on channel "Default". The address 85.254.224.235 might be
incorrect or another process is using port 80: java.net.BindException: Address
already in use: JVM_Bind.>
<2009.1.4 16:02:22 EEST> <Critical> <WebLogicServer> <BEA-000362> <Server failed
. Reason: Server failed to bind to any usable port. See preceeding log message f
or details.>
<2009.1.4 16:02:22 EEST> <Error> <Server> <BEA-002606> <Unable to create a serve
r socket for listening on channel "Default[2]". The address 127.0.0.1 might be i
ncorrect or another process is using port 80: java.net.BindException: Address al
ready in use: JVM_Bind.>
<2009.1.4 16:02:22 EEST> <Error> <Server> <BEA-002606> <Unable to create a serve
r socket for listening on channel "Default[1]". The address 192.168.0.102 might
be incorrect or another process is using port 80: java.net.BindException: Addres
s already in use: JVM_Bind.>
<2009.1.4 16:02:22 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to FAILED>
<2009.1.4 16:02:22 EEST> <Error> <WebLogicServer> <BEA-000383> <A critical servi
ce failed. The server will shut itself down>
<2009.1.4 16:02:22 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to FORCE_SHUTTING_DOWN>
2009.1.4 16:02:22 oracle.adf.share.config.ADFConfigFactory cleanUpApplicationSta
te
INFO: Cleaning up application state
2009.1.4 16:02:22 oracle.adf.share.config.ADFConfigFactory cleanUpApplicationSta
te
INFO: Cleaning up application state
Best regards!

Debuger,
It does not matter which WLS version I am using (although I'm using 10.3, the one that comes with JDev 11g).
The problem is that SOME OTHER PROCESS on your machine is listening on port 80. Guess you need to go to the Microsoft forums to find out how you can tell what that OTHER, NOT WLS process is.
John

Trouble adding second port BRI in a 2801 MGCP gateway

my config is CCM 413 with a 2801 SRST including a VIC2-2BRI .
I have configured the 2801 as MGCP gateway on the CCM, added the module VIC2-2BRI and configured the BRI 0/0/0 in this gateway.
this BRI work properly with the PSTN . I can make successfull call inbound and outbound
Now I want to add the second BRI (ie BRI 0/0/1 ) in the gateway for the same hunt group, the same PSTN provider.
When I do that this BRI can't register and make different kind of problem on the existing well working BRI.
for example I noticed that I can make inbound or outbound call with connected state but no voice in the two way.
I noticed also that the first BRI become completely blocked after two call.
I have verified the conf of the BRI 0/0/1 but i don't see any difference with the BRI 0/0/0 .
the only way to get back good working of the BRI 0/0/0 is to remove BRI 0/0/1 from the gateway conf.

Hello,
That is a good news though. Can you please share to me the TAC case nr? So I can refer this to tAC. Because we have also opened a CASE for the same problem on the 3725 but not hear from TAC yet for the patch!
I got another image ie. IPVOICE version 12.4.1.9 from a friend that has the patch for this problem on the 2801 but there is no SPSERVICES image yet.
Now it looks that Cisco has a newer image.
Thanks in advance.
Regards

Mail port number won't hold. Received instructions from Comporium to change port number to 465, SSL checked and password required. Now port reverts to 110 when quitting mail and reopening.

OS X Yosemite on MacBook. Mail port number will not hold. Changed mail account info as instructed by Comporium, including changing port to 465, use SSL and password. Now the port reverts to 110 when Mail app is closed and reopened; the entered port number - 465 - will not hold.

OK folks, I think we have a winner.
I finally got frustrated so I sponsored a conference call with a Palm Level 3 tech support guy, the Telus rep and a Bell rep. We were on hold for a total of like 45 minutes as I chained the call along and finally got everyone on the same line.
So here's the deal: The setup has to be done manually as thepoet suggested. The incoming server is OK as imap and imap.telus.net with no encryption. The outgoing server has to be set to point to mail.1xbell.ca with NO authentication, port 25 and no encryption. The initial Bell tech support guy was quite close to the solution, just the wrong port number and the wrong sequence of setting it up.
I have been able to send successfully, but want to try a couple of more things before I declare it a complete success.
Thanks for your help Poet, much appreciate your persistance.

Change port number generated by CONSTRUCT_WD_URL

We are using load balancing and have 2 ports, one of which is open, and other is not (due to security settings).
When our application hits the port that is not open, we are not able to open the application.
Eg: two ports - 100 and 200.
100 is open, 200 is not.
So when WD (due to load balancing) runs on port 200, the CONSTRUCT_WD_URL returns port as 200. The application does not load.
We cannot change the call to the CONSTRUCT_WD_URL method, as it is a standard application that is having it.
What can we do to avoid this issue?
Thanks in adv.

Thanks Xavier. You brought me very close to the answer.
Now only one trouble is there.
I can maintain entries in the table, and it will take host and port from here.
Port is okay.
But for load balancing, sometimes my host is like this:
abc1234.xyz.com.sg
My actual host which is doing load balancing is : abc.xyz.com.sg
So if incoming URL is like this: abc1234.xyz.com.sg:100, I want it to change to abc.xyz.com.sg:200.
All seems well, but there is this line of code: '
    LOOP AT httpurlloc ASSIGNING <httpurlloc>.
    If specified, match string against (possible wildcard '*' in) table.
      CHECK application IS INITIAL OR <httpurlloc>-applicatn IS INITIAL OR application CP <httpurlloc>-applicatn.
      CHECK for_domain IS INITIAL OR <httpurlloc>-for_domain IS INITIAL OR for_domain CP <httpurlloc>-for_domain.
      CHECK host_header IS INITIAL OR host_header CP <httpurlloc>-host.
The last line gives host header as abc1234.xyz.com.sg. So if I maintain my host as abc.xyz.com.sg, it does not go ahead.
I cannot maintain abc1234.xyz.com.sg. Now I am stuck.
Can advise how to go about it?
Thanks in adv.

MGCP Gateway Change port from POTS to Loop Start

Similar Messages

Maybe you are looking for