MGCP PRI - UpDown logs difference between Telco Issue and Network issue

Hi,
Setup is remote site MGCP Gateway and CUCM is on HQ. I'm suspecting the below logs and what caused its flap but not 100% sure, is this correct?
Logs caused by connection to Telco
021987: Jan 14 18:15:45.708: %CONTROLLER-5-UPDOWN: Controller E1 0/3/0, changed state to down (AIS detected)
021988: Jan 14 18:15:45.712: %CONTROLLER-5-UPDOWN: Controller E1 0/3/1, changed state to down (AIS detected)
021989: Jan 14 18:15:46.692: %CONTROLLER-5-UPDOWN: Controller E1 0/2/0, changed state to down (AIS detected)
021990: Jan 14 18:15:46.692: %CONTROLLER-5-UPDOWN: Controller E1 0/2/1, changed state to down (AIS detected)
021991: Jan 14 18:15:46.692: %CONTROLLER-5-UPDOWN: Controller E1 0/2/2, changed state to down (AIS detected)
021992: Jan 14 18:15:46.696: %CONTROLLER-5-UPDOWN: Controller E1 0/2/3, changed state to down (AIS detected)
021993: Jan 14 18:15:46.912: %MARS_NETCLK-3-HOLDOVER: Entering Holdover for Controller E1 0/2/0
021994: Jan 14 18:15:47.708: %LINK-3-UPDOWN: Interface Serial0/3/0:15, changed state to down
021995: Jan 14 18:15:47.712: %LINK-3-UPDOWN: Interface Serial0/3/1:15, changed state to down
021996: Jan 14 18:15:48.692: %LINK-3-UPDOWN: Interface Serial0/2/1:15, changed state to down
021997: Jan 14 18:15:48.696: %LINK-3-UPDOWN: Interface Serial0/2/2:15, changed state to down
021998: Jan 14 18:15:48.696: %LINK-3-UPDOWN: Interface Serial0/2/3:15, changed state to down
021999: Jan 14 18:15:49.692: %CONTROLLER-5-UPDOWN: Controller E1 0/2/0, changed state to up
022000: Jan 14 18:15:49.700: %CONTROLLER-5-UPDOWN: Controller E1 0/2/1, changed state to up
022001: Jan 14 18:15:49.708: %CONTROLLER-5-UPDOWN: Controller E1 0/2/3, changed state to up
022002: Jan 14 18:15:51.700: %LINK-3-UPDOWN: Interface Serial0/2/1:15, changed state to up
022003: Jan 14 18:15:51.708: %LINK-3-UPDOWN: Interface Serial0/2/3:15, changed state to up
022004: Jan 14 18:15:52.164: %MARS_NETCLK-3-HOLDOVER: Exiting Holdover for Controller E1 0/2/0
022005: Jan 14 18:15:53.692: %CONTROLLER-5-UPDOWN: Controller E1 0/2/2, changed state to up
022006: Jan 14 18:15:53.708: %CONTROLLER-5-UPDOWN: Controller E1 0/3/0, changed state to up
022007: Jan 14 18:15:53.716: %CONTROLLER-5-UPDOWN: Controller E1 0/3/1, changed state to up
022008: Jan 14 18:15:55.692: %LINK-3-UPDOWN: Interface Serial0/2/2:15, changed state to up
022009: Jan 14 18:15:55.708: %LINK-3-UPDOWN: Interface Serial0/3/0:15, changed state to up
022010: Jan 14 18:15:55.716: %LINK-3-UPDOWN: Interface Serial0/3/1:15, changed state to up
Logs caused by network connectivity issue between CUCM and MGCP Gateway
021869: Jan 7 10:05:00.763: %LINK-5-CHANGED: Interface Serial0/2/2:15, changed state to administratively down
021870: Jan 7 10:05:01.371: %SYS-5-CONFIG_I: Configured from console by console
021871: Jan 7 10:05:02.575: %SYS-5-CONFIG_I: Configured from console by console
021872: Jan 7 10:05:02.667: %LINK-5-CHANGED: Interface Serial0/2/3:15, changed state to administratively down
021873: Jan 7 10:05:03.275: %SYS-5-CONFIG_I: Configured from console by console
021874: Jan 7 10:05:04.479: %SYS-5-CONFIG_I: Configured from console by console
021875: Jan 7 10:05:04.571: %LINK-5-CHANGED: Interface Serial0/3/0:15, changed state to administratively down
021876: Jan 7 10:05:05.179: %SYS-5-CONFIG_I: Configured from console by console
021877: Jan 7 10:05:06.475: %LINK-5-CHANGED: Interface Serial0/3/1:15, changed state to administratively down
021878: Jan 7 10:05:08.391: %SYS-5-CONFIG_I: Configured from console by console
021879: Jan 7 10:05:09.603: %SYS-5-CONFIG_I: Configured from console by console
021880: Jan 7 10:05:10.815: %SYS-5-CONFIG_I: Configured from console by console
021881: Jan 7 10:05:11.591: %LINK-3-UPDOWN: Interface Serial0/2/1:15, changed state to up
021882: Jan 7 10:05:12.027: %SYS-5-CONFIG_I: Configured from console by console
021883: Jan 7 10:05:12.803: %LINK-3-UPDOWN: Interface Serial0/2/2:15, changed state to up
021884: Jan 7 10:05:13.239: %SYS-5-CONFIG_I: Configured from console by console
021885: Jan 7 10:05:14.015: %LINK-3-UPDOWN: Interface Serial0/2/3:15, changed state to up
021886: Jan 7 10:05:14.451: %SYS-5-CONFIG_I: Configured from console by console
021887: Jan 7 10:05:15.227: %LINK-3-UPDOWN: Interface Serial0/3/0:15, changed state to up
021888: Jan 7 10:05:16.439: %LINK-3-UPDOWN: Interface Serial0/3/1:15, changed state to up
021889: Jan 7 10:05:39.379: %SYS-5-CONFIG_I: Configured from console by console
021890: Jan 7 10:05:40.079: %SYS-5-CONFIG_I: Configured from console by console
021891: Jan 7 10:05:41.783: %SYS-5-CONFIG_I: Configured from console by console
021892: Jan 7 10:05:42.483: %SYS-5-CONFIG_I: Configured from console by console
021893: Jan 7 10:05:43.779: %LINK-5-CHANGED: Interface Serial0/2/1:15, changed state to administratively down
021894: Jan 7 10:05:44.187: %SYS-5-CONFIG_I: Configured from console by console
021895: Jan 7 10:05:44.887: %SYS-5-CONFIG_I: Configured from console by console
021896: Jan 7 10:05:46.183: %LINK-5-CHANGED: Interface Serial0/2/2:15, changed state to administratively down
021897: Jan 7 10:05:46.591: %SYS-5-CONFIG_I: Configured from console by console
021898: Jan 7 10:05:47.291: %SYS-5-CONFIG_I: Configured from console by console
021899: Jan 7 10:05:48.587: %LINK-5-CHANGED: Interface Serial0/2/3:15, changed state to administratively down
021900: Jan 7 10:05:48.995: %SYS-5-CONFIG_I: Configured from console by console
021901: Jan 7 10:05:49.695: %SYS-5-CONFIG_I: Configured from console by console
021902: Jan 7 10:05:50.991: %LINK-5-CHANGED: Interface Serial0/3/0:15, changed state to administratively down
021903: Jan 7 10:05:51.399: %SYS-5-CONFIG_I: Configured from console by console
021904: Jan 7 10:05:52.099: %SYS-5-CONFIG_I: Configured from console by console
021905: Jan 7 10:05:53.395: %LINK-5-CHANGED: Interface Serial0/3/1:15, changed state to administratively down
021906: Jan 7 10:05:55.811: %SYS-5-CONFIG_I: Configured from console by console
021907: Jan 7 10:05:57.023: %SYS-5-CONFIG_I: Configured from console by console
021908: Jan 7 10:05:58.235: %SYS-5-CONFIG_I: Configured from console by console
021909: Jan 7 10:05:59.011: %LINK-3-UPDOWN: Interface Serial0/2/1:15, changed state to up
021910: Jan 7 10:05:59.447: %SYS-5-CONFIG_I: Configured from console by console
021911: Jan 7 10:06:00.223: %LINK-3-UPDOWN: Interface Serial0/2/2:15, changed state to up
021912: Jan 7 10:06:00.659: %SYS-5-CONFIG_I: Configured from console by console
021913: Jan 7 10:06:01.435: %LINK-3-UPDOWN: Interface Serial0/2/3:15, changed state to up
021914: Jan 7 10:06:01.871: %SYS-5-CONFIG_I: Configured from console by console
021915: Jan 7 10:06:02.647: %LINK-3-UPDOWN: Interface Serial0/3/0:15, changed state to up
021916: Jan 7 10:06:03.859: %LINK-3-UPDOWN: Interface Serial0/3/1:15, changed state to up
thanks in advance!!

Here it is.. what is it you're looking for? i'm suspecting the above difference between %LINK-5-CHANGED (network issue) vs %LINK-3-UPDOWN (telco issue)
E1 0/2/0 is up.
Applique type is Channelized E1 - balanced
Description:
No alarms detected.
alarm-trigger is not set
Version info FPGA Rev: 08121917, FPGA Type: PRK4
Framing is CRC4, Line Code is HDB3, Clock Source is Line.
International Bit: 1, National Bits: 11111
Data in current interval (71 seconds elapsed):
     0 Line Code Violations, 0 Path Code Violations
     0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
     0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Total Data (last 24 hours)
     0 Line Code Violations, 330 Path Code Violations,
     0 Slip Secs, 6 Fr Loss Secs, 0 Line Err Secs, 1 Degraded Mins,
     7 Errored Secs, 5 Bursty Err Secs, 2 Severely Err Secs, 2147417995 Unavail Secs
E1 0/2/1 is up.
Applique type is Channelized E1 - balanced
Description:
No alarms detected.
alarm-trigger is not set
Version info FPGA Rev: 08121917, FPGA Type: PRK4
Framing is CRC4, Line Code is HDB3, Clock Source is Line.
International Bit: 1, National Bits: 11111
Data in current interval (72 seconds elapsed):
     0 Line Code Violations, 0 Path Code Violations
     0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
     0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Total Data (last 24 hours)
     0 Line Code Violations, 314 Path Code Violations,
     0 Slip Secs, 5 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,
     8 Errored Secs, 6 Bursty Err Secs, 2 Severely Err Secs, 2147418015 Unavail Secs
E1 0/2/2 is up.
Applique type is Channelized E1 - balanced
Description:
No alarms detected.
alarm-trigger is not set
Version info FPGA Rev: 08121917, FPGA Type: PRK4
Framing is CRC4, Line Code is HDB3, Clock Source is Line.
International Bit: 1, National Bits: 11111
Data in current interval (75 seconds elapsed):
     0 Line Code Violations, 0 Path Code Violations
     0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
     0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Total Data (last 24 hours)
     0 Line Code Violations, 344 Path Code Violations,
     0 Slip Secs, 12 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,
     16 Errored Secs, 4 Bursty Err Secs, 5 Severely Err Secs, 2147418015 Unavail Secs
E1 0/2/3 is up.
Applique type is Channelized E1 - balanced
Description:
No alarms detected.
alarm-trigger is not set
Version info FPGA Rev: 08121917, FPGA Type: PRK4
Framing is CRC4, Line Code is HDB3, Clock Source is Line.
International Bit: 1, National Bits: 11111
Data in current interval (103 seconds elapsed):
     0 Line Code Violations, 0 Path Code Violations
     0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
     0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Total Data (last 24 hours)
     0 Line Code Violations, 448 Path Code Violations,
     0 Slip Secs, 5 Fr Loss Secs, 0 Line Err Secs, 1 Degraded Mins,
     7 Errored Secs, 5 Bursty Err Secs, 2 Severely Err Secs, 2147418002 Unavail Secs
E1 0/3/0 is up.
Applique type is Channelized E1 - balanced
Description:
No alarms detected.
alarm-trigger is not set
Version info FPGA Rev: 08121917, FPGA Type: PRK4
Framing is CRC4, Line Code is HDB3, Clock Source is Line.
International Bit: 1, National Bits: 11111
Data in current interval (104 seconds elapsed):
     0 Line Code Violations, 0 Path Code Violations
     0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
     0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Total Data (last 24 hours)
     0 Line Code Violations, 299 Path Code Violations,
     0 Slip Secs, 8 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,
     11 Errored Secs, 5 Bursty Err Secs, 0 Severely Err Secs, 2147418017 Unavail Secs

Similar Messages

What is the difference between physical topology and network topology ,

HI
what is the difference between physical topology and network topology ,
adil

They are tightly linked. The network topology is only interested in the networking links between servers or other actors. A physical topology contains the servers as well as the networking components between them. You might use the term in a different
manner which related to various site's physical attributes such as location but I doubt that's what the document you're working from means.

What is the difference between delivery date and actual goods issue date?

Hi ,
Can you please tell me the difference between Delivery date and Actual goods issue date ?
Delivery data can be be greater than goods issue date?
Thanks,
Ajay

Hi Ajay,
Delivery date means its the original date on which the delivery should be done.Actual goods Issue date is the date on which goods to be delivered according to the purchase order.There can be delay in the delivery so we maintain 2 objects.
Yes delivery date can be greater than Goods Issue date.
Hope this clears
Regards
Karthik

What's the difference between shut down and log out?

Hi,
I have a MacBook Air and will sell it.
I like to take out my name but don't know how.
What will happen if I Log Out (my name comes after that)?
What's the difference between Shut down and Log out?
Help please,
Thanks

Welcome to the Apple Support Communities
The shut down turns off the Mac and a log out closes your user and take your computer to the log in screen. To sell the Mac, you have to reinstall Mac OS X erasing the disk. Open  > About this Mac and copy Version

DIFFERENCE BETWEEN THE FULL AND BULK-LOGGED RECOVERY MODEL

DIFFERENCE BETWEEN THE FULL AND BULK-LOGGED RECOVERY MODEL

In bulk logged recovery mode certain bulk operations are minimally logged. In FULL recovery mode these are fully logged. These bulk operations are as mentioned below
1. SELECT INTO
2. BULK IMport operations including BULK INSERT and BCP
3. INSERT INTO SELECT command using the OPENROWSET(BULK) function
4. Partial updates to columns having large value data type
5. Using WRITE clause in UPDATE statements
6. Index operations e.g CREATE INDEX, ALTER INDEX REBUILD , DROP INDEX
In Bulk Logged Recovery Mode when you execute these operations SQL Server only logs the fact that these operation occured and information about space allocation. The actual change in the data is maintained in the BCM (Bulk
Changed Map)
Since the actual changes are not recorded in the log file, the log file size in the reletively less in size but this tradeoff comes with the price of increased backup time. This is so because during the log backup its not just the log being backup, but also
the extents that are marked by the Bulk Changed Map as changed.
SQLEnthusiast
http://sqlsimplified.com/
Please click the Mark as Answer button if a post solves your problem!

What is the difference between undo tablespace and online redo log files.

what is the difference between undo tablespace and online redo log files. I am confused
as per my knowledge undo tablespace is used to store the undo information when a table is being updated so that, just incase we need to rollback a transaction we know what was present in the table earlier.
when a transaction fails the SMON performs the rollback of the data.
This undo data is stored in the undo tablespace and read consistency if any is enforced.
is my understanding till here correct?
Now, can this undo data/before image not be stored in the redo log buffer and online redolog files?
can redo-log files not store this information?
in fact, is it that when undo tablespaces exist in a database, the undo data/before image is stored in both the undo tablespace and also the redo log files?
kindly clarify my doubt.
thank you.

This question has been asked many times before. The answer is always the same.
Yes, redo contains the before image of data (and the after-image). Therefore, it **COULD** be used to roll back a transaction.
BUT... Redo is written sequentially. Using it to rollback your transaction would involve reading through all the redo written by maybe thousands of other people. It would be painfully slow.
Your transaction is, however, directly linked to just the UNDO that it generates (which is JUST the before image of the data). So, your undo is your undo and doesn't share space with anyone else's undo. Therefore, using it to roll back YOUR transaction is fast.
The fact that undo is only the before image of the data also makes it faster than wading through a sea of before and AFTER images as you'd find in redo. About twice as fast, in fact, since there's half the data. Roughly.
Redo also gets written and flushed to disk whenever there's a commit, 3 seconds are up or too much (1MB, actually) redo gets generated between flushes caused by other factors. Your redo gets flushed when those things happen, even if you haven't actually committed your transaction. And redo logs recycle themselves, meaning that your redo -even if your transaction hasn't been committed yet- can be over-written by later transactions. Try rolling back when that's happened, if redo was the source of your rollback data!
Undo, however, cannot be over-written if the transaction has not been committed. Ever. If you don't commit for three years, there will be three years' undo stored in your database (assuming you had the space, of course!).
I could go on, but that will do. Redo is there fore RECOVERY, after catastrophe. Undo is there for read-consistency (and the occasional change of mind). Two different functions. Two different mechanisms. Each one highly tuned to doing what it does, why it does it, most efficiently and effectively.

Difference between Smart Forms and Adobe Form

Hi all,
What are disadvantages of Smart form in SAP ,
What is difference between Smart Forms and Adobe interactive Form.
I heard from someone that in future Adobe interactive Form will repalce smart forms. Is it true or not
Best Regards
Srikanth

Hi,
Companies depend on formal documents that reflect their corporate identities and contain critical business information from live systems. SAP and Adobe partnered for automating and streamlining forms-based communication to support customers who create reusable forms for their business processes.
SAP Interactive Forms by Adobe will be used more and more as a way of simplifying and automating manual processes.
There are various advantages of Adobe forms.
SAP Interactive Forms by Adobe provides all the features and functions you need to create form-based output, such as order confirmations, invoices, or pay slips. You can either print such documents or send them by email or FAX.
Online Interactive Forms
A user logs on to the company intranet to fill in a form required by the HR department (for example, a Non-Disclosure Agreement to be signed by a new employee). The form is displayed in the browser.
As the user is logged on in the background to the company's HR system, his master data is displayed in the form. The user enters the required information in the fillable fields of the interactive form, and sends the data back to the system by pushing a button. The system extracts the data from the form and saves it in the database.
Offline Interactive Forms
The purchasing department of a company creates a bid in its Enterprise Resource Planning (ERP) system and selects the potential vendors. Based upon this data, the system automatically creates interactive bidding forms with specific vendor information, such as the address or contact person.
The forms are transmitted to the vendors by email. The vendors can fill out the forms offline (without being connected to the system that created the forms) and transmit them back to the company. The company then processes the forms automatically, and the data provided by the vendors is written to the ERP system. The purchasing department uses the data to evaluate the quotation and then issues an order.
With the integration of Adobe PDF technology into its solutions, SAP will be able to further extend its offerings of end-to-end business solutions by:
Providing for the first time the capabilities of Adobe's interactive PDF-based forms.
Integrating PDF documents into business processes that are driven by SAP applications.
Automating the process of moving XML data from SAP applications into interactive forms and vice versa.
Reducing time to design, manage, and maintain extended forms-based processes through easy-to-use forms design and deployment tools.
Offering its customers enhanced printing capabilities, in particular for interactive Web applications.
The focus of new forms technology from SAP is interactive PDF-based forms that can be created in SAP systems as a result of the integration of Adobe technology with Web Dynpro and the SAP NetWeaver Developer Studio. This integration means that adobe is the future technology.
Regards,
Kate

Difference between v$instance and v$thread

Hallo,
What is the difference between v$instance and v$thread?
Thanks,

Well, a mere description of the views in the official documentation isn't going to actually help you very much more than you could do with a simple "desc V$instance/desc V$thread", I suspect.
The answer I think you might be looking for is that a thread is not the same thing as an instance. In fact, we usually talk about "a thread of redo", which gets much closer to the issue here. Yes, it is true that one instance can only generate one 'thread of redo', so one instance = one thread, and there's a temptation to extrapolate from that and assume they're the same thing.
But they're not. An instance is a set of memory structures and processes. It has a name. It gets started and stopped. In can be running in various states (nomount, mount, open, read-only, primary, secondary etc).
A thread of redo is a history of redo generated by an instance. It has ever-incrementing checkpoint change numbers, times of last checkpoints, sequence numbers, blocks of redo that are forever being flushed to different parts of the current redo log. And so on.
Thus, V$INSTANCE tells you the state of the instance and V$THREAD tells you all you could ever want to know about where you're up to in the writing-redo stakes.

Difference between pack/unpack and T2P (copyConfig/copyBinary)

Hi Experts,
I have a requirement to clone WLS 10.3.3 running SOA and OHS. I am facing some issues (encountering NPE on running copyBinary.sh and extractMovePlan.sh file is missing) while doing T2P for OHS. I see pack.sh and unpack.sh can be used to make WLS domain templates and create new domains on different machines/hosts.
Please let me know what is the difference between the two approaches T2P and pack.sh/unpack.sh. Also please suggest which is the recommended approach.
Note: I am new to WLS, so please don't mind if my question is trivial or doesn't make sense.
Thanks
Rathnam

Below is the Stack Trace for NPE:
=======================================================================================
Null Point Exception Error:
bash-3.2$ /than8o/fmw/product/111/oracle_common/bin/copyConfig.sh -javaHome /than8o/fmw/jrmc-4.0.0-1.6.0 -al /ptsadmin/FMW_clone/config/OHS_CopyConfig.jar -sourceInstanceHomeLoc /than8o/fmw/product/111/ohs_instances -sourceComponentName ohs1
Log File: "/tmp/CLONE2012-09-19_03-56-21PM-LOG/CLONE2012-09-19_03-56-21PM.log".
Error File: "/tmp/CLONE2012-09-19_03-56-21PM-LOG/CLONE2012-09-19_03-56-21PM.error".
To proceed, type "yes":yes
INFO : Sep 19, 2012 3:19:23 PM - CLONE-21095 Create archive for instance1@ohs1 started ...
java.lang.NullPointerException
at oracle.as.clone.classloader.CloningFrameworkClassLoader.getClonableEntityTypes(CloningFrameworkClassLoader.java:162)
at oracle.as.clone.classloader.CloningFrameworkClassLoader.<init>(CloningFrameworkClassLoader.java:254)
at oracle.as.clone.classloader.CloningFrameworkClassLoader.getInstance(CloningFrameworkClassLoader.java:222)
at oracle.as.clone.cloner.component.ComponentCreateCloner.doClone(ComponentCreateCloner.java:66)
at oracle.as.clone.cloner.Cloner.doFinalClone(Cloner.java:56)
at oracle.as.clone.request.CreateGenericArchive.doGenericArchive(CreateGenericArchive.java:128)
at oracle.as.clone.request.CreateCloneRequest._clone(CreateCloneRequest.java:69)
at oracle.as.clone.process.CloningExecutionProcess.execute(CloningExecutionProcess.java:145)
at oracle.as.clone.process.CloningExecutionProcess.execute(CloningExecutionProcess.java:128)
at oracle.as.clone.client.CloningClient.executeCloneCommand(CloningClient.java:123)
at oracle.as.clone.client.CloningClient.main(CloningClient.java:83)
oracle.as.clone.exception.FMWCloningException: java.lang.NullPointerException
at oracle.as.clone.classloader.CloningFrameworkClassLoader.getInstance(CloningFrameworkClassLoader.java:227)
at oracle.as.clone.cloner.component.ComponentCreateCloner.doClone(ComponentCreateCloner.java:66)
at oracle.as.clone.cloner.Cloner.doFinalClone(Cloner.java:56)
at oracle.as.clone.request.CreateGenericArchive.doGenericArchive(CreateGenericArchive.java:128)
at oracle.as.clone.request.CreateCloneRequest._clone(CreateCloneRequest.java:69)
at oracle.as.clone.process.CloningExecutionProcess.execute(CloningExecutionProcess.java:145)
at oracle.as.clone.process.CloningExecutionProcess.execute(CloningExecutionProcess.java:128)
at oracle.as.clone.client.CloningClient.executeCloneCommand(CloningClient.java:123)
at oracle.as.clone.client.CloningClient.main(CloningClient.java:84)
Caused by: java.lang.NullPointerException
=======================================================================================
Basically I am looking at knowing the difference between pack/unpack and T2P using copyConfig/copyBinary/extractMovePlan.
Thanks
Rathnam

What is difference between bex analyser and bex browser

what is difference between bex analyser and bex browser . please explain what are use of both and what we do in both.

hi
Bex Browser
The Business Explorer Browser (BEx Browser) makes it possible for you to access all document types of the Business Information Warehouse that are assigned to your role or that you have stored in your favorites. You can select and open documents assigned to you in the BEx Browser or store and manage new documents in the BEx Browser.
Document types that you can work with in the BEx Browser are:
· BW workbooks
· Documents that are stored in the Business Document Service (BDS)
· Links (references to file system, shortcuts)
· Links to internet sites (URLs)
· SAP transaction calls.
· Web applications and Web templates
· Crystal Reports
Bex Analyser
The Business Explorer Analyzer (BEx Analyzer) is the analysis and reporting tool of the Business Explorer that is embedded in Microsoft Excel.
Features
You can call up the BEx Query Designer in the BEx Analyzer, in order to define queries. Subsequently, you can analyze the selected InfoProvider data by navigation to the query created in the Query Designer and create different query views of the data. You can add the different query views for a query or for different queries to a work book and save them there. You can save the workbook in your favorites or in your role on the BW Server. You can also save the workbook locally on your computer.
Beyond that, you can precalculate the workbook and distribute it by e-mail to recipeients or you can export it to the Enterprise Portal and make it accessible to other employees in the company.
You can start queries in a standard view (with a Standard Web Template set up in Customizing) in the Web browser and forward the URL or continue to navigate on the Web. Similarly, you can export the Web query to MS Excel 2000.
Overview of the Functional Area of the BEx Analyzer:
·        BEx toolbar
You access the functions of the BEx Analyzer from the BEx toolbar, which takes you to the BEx Open dialog box where you can open existing queries, or to the BEx Query Designer where you can create new queries or change existing queries.
·        Evaluating Query Data
The BEx Analyzer offers convenient functions for evaluating and presenting InfoProvider data interactively. In the BEx Analyzer, you can add queries to workbooks, navigate within them and refresh the data. You can also process the queries further in Microsoft Excel or display them in the Web browser in a default view.
Navigation of a query allows you, for example, to filter characteristics on a single value, drilldown on all values for a characteristic, regroup characteristics and key figures in the rows and columns of the results area, or hide key figures. Navigation results in different views of the InfoProvider data. In addition, a range of further functions is available which allow you to edit a query interactively (for example, sorting, cumulated output, among others). In addition, you can use the editing functions in Microsoft Excel in order to set up individual format templates, to print results areas, or to create graphics.
·        Queries in Workbooks
Queries are inserted into workbooks so you can display them. When you insert a query, a link is made between the cell areas of the worksheet and the data of the InfoProvider upon which the query is based. A link therefore exists between the Business Explorer and the Business Information Warehouse Server (BW Server).
When inserting a query into the workbook, a VBA routine is automatically generated in the workbook. You can also connect the Business Explorer with your own VBA programs (Visual Basic for Applications).
You can create workbook templates, into which you can insert your queries. Workbook templates can contain pre-determined items for the area of the query, formatting settings, logos, VBA macros, and so on.
·        Precalculating workbooks
You can precalculate and distribute workbooks with the BEx Broadcaster, which is a Web application you get to form the BEx toolbar. The system generates MS Excel workbooks with historical data. You determine the time for precalculation yourself: You can have workbooks precalculated at a predefined time or they can be precalculated whenever data in the underlying InfoProvider changes. You can have the precalculated workbooks sent by e-mail or you can export them into the Enterprise Portal, where you can make them available to employees within your company.
Activities
To start the BEx Analyzer, choose Start ® Programs ® SAP Front-end Business Information Warehouse ® SAP Business Explorer Analyzer.
You can also access the BEx Analyzer via SAP Easy Access ® SAP Business Information Warehouse ® SAP Menu ® Business Explorer ® Analyzer or in the Business Explorer Browser using the Business Explorer Analyzer symbol in the menu bar.
Hope this will solve your issu
nagarjuna

WHAT IS DIFFERENCE BETWEEN FIRMWARE CKP5CN1334ER AND VersionCLP1CN1322CR,

WHAT IS DIFFERENCE BETWEEN FIRMWARE CKP5CN1334ER AND VersionCLP1CN1322CR, i GET A MESSAGE WHEN I TRY TO SCAN AN EMAIL THAT I NEED TO MANUALLY CHECK BY FIRMWARE

Hi sawmill1,
Welcome to the HP Support Forums. I see that you are getting a message to update the firmware of your printer to allow you to use scan to email.
To better assist you, would you please provide some further information:
What make/model/product number of HP printer do you have? How Do I Find My Model Number or Product Number?
How is the printer connected (USB cable, ethernet, or wireless)?
What operating system are you using on your computer? whatsmyos.com
Are you getting any other error messages? If yes, what does it say and where is it displayed (printer or computer)?
Have you tried to update the firmware of the printer?
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Difference between 'materialized vews' and snapshots

Hello,
i have two questions:
what the difference between 'materialized vews' and snapshots? In fact, in create thoses Oracle Objects:
     create materialized view log on T1
     Create materialized view T1_MV
          Build immediate
          Refresh fast on commit
          As Select COL1,COL2 from T1
     Create snapshot T1_SNAPSHOT
     Build immediate
     Refresh fast on commit
     As Select COL1,COL2 from T1
and in find that T1_MV and T1_SNAPSHOT have the same caracteristics in dba_tables and DBA_SNAPSHOTS and DBA_MVIEWS.
seconde question: what's the difference between DBA_SNAPSHOTS
and DBA_MVIEWS tables?
I work under oracle 9i
thinks for response.

Backwards compatibility. Some apps might reference DBA_SNAPHOTS and it would be a PITA to change them. Eventually Oracle might decide that it's a greater PITA for them to keep those views and ditch 'em.
Cheers, APC

Difference between Scheduling lines and Delivery schedule

Hi SD Experts
can u say me the clear difference between Scheduling lines and Delivery schedule.
where we will maintain deliver schedule. whether delivery schedule is automatically created along scheduling agreements..
with regards
James

Hi James,
Schedule Lines: Has basically information realted to delivery scheduling in Sales Order level.
Delivery Scheduling: Is a process using which system will determine what are the different activities which need to be performed and time taken for each activitiy only after which the material can be delivered to the customer.
Delievry scheduling will be started only from the material availability date i.e., system will first determine the material avail date and then do scheduling. By default Standard SAP system does Backward Scheduling in case material availability falls beyond the required delivery date system will do forward schedluing
Delivery Scheduling consists of the following Basic activities:
We give deatils while creating order:
Order Creation Date
Required Delivery Date
Order date - Material availability date - Transportation Planning Date - Loading date - Goods Issue Date - Required Delivery Date
Time Between GI Date and required Delivery Date is called Transit Time
Time Between LoadingDate and GI Date is called Loading time
Time Between Material Availability Date and Loading Date consists of 2 components - Pick / PackTime and Transportation Planning Time
System has to calculate all this before it determines the confirmed delivery date.
Give your mail Id I have some Presentation I will send you across.
REWARD POINTS IF IT HELPS
Regards
Srini

Difference between a Search and a Retrieve web service?

Anyone has any idea what's the difference between a Search and Retrieve web-services generated by the 7.1 WS Generator? It seems like you can use both to retrieve any kind of result definition and search by any field.
I don't mind really, just curious if I'm missing something.
Alon

Googling led me to this:
Authentication:
Portal: You log-in to the site. Provides you with information based on who you are.
e.g. mail.yahoo.com
Website: No log-in.
e.g. www.yahoo.com
Personalization:
Portal: Limited, focused content. Eliminates the need to visit many different sites.
e.g. you type in your user name and password and see your yahoo mail only.
Website: Extensive, unfocused content written to accommodate anonymous users needs.
Customization :
Portal: You will select and organize the materials you want to access. Organized with the materials you want to access.
Website: Searchable, but not customizable. All content is there for every visitor.
e.g. you can navigate to yahoo mail, yahoo shopping, geo cities, yahoo group. If you wish to use any of these services you will either have to authenticate yourself and see things personalized to you or you can simply visit sections that are for everyone like yahoo news were if you are not signed in then the default sign in is guest.

The difference between SOAP adapter and WS adapter in PI 7.1

Hello all,
can anybody explain what is the main difference between SOAP adapter and WS adapter in PI 7.1?
I have checked this [link|http://help.sap.com/saphelp_nwpi71/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm]
but was not able to find the real difference.
Or better, what can I do with WS adapter I can't do with SOAP adapter? What are their advantages/disadvantages?
Thank you all, Igor.

In addition to RM, ws adapter also support other ws standard like SAML which is not available in SOAP adatper. Beside:
if your sender or receiver is SAP system, you can also monitor the message in the sender/receiver in addition to the PI box. This is a very good thing, because sometime the MONI in PI shows nothing wrong, but the MONI in your receiver will show you error message that's only related to the receiver system.
However, if you define ws sender CC, and your ws client doesn't support RM, you will have issue sending ws request.
And ws CC will generate ws runtime in PI box, if your configuration is wrong (like user name and password not correct), even if you correct it, the ws runtime sometime won't be regenated based on the correction. In this case you need to delete the ws CC/agreement, and re-create it with all correct information.
Beside make sure your basis team configured the PI system properly regarding ws. If not, you will have lot of pain to figure the problem which was my case.
Jayson

MGCP PRI - UpDown logs difference between Telco Issue and Network issue

Similar Messages

Maybe you are looking for