MGP is starting off after one minute inspite of MGP_DELAY parameter

Hello
We have a strange problem. MGP starts and finishes fine...but it starts again after one minute which is the default value(60 seconds).
We are using MGP_DELAY parameter in webtogo.ora with a value of 800 seconds..its still starts after one minute only...
We are starting MGP from the mobile server and not as service..
We restarted mobile server also..
Can anybody help us with this strange behavior..
Am I missing anything..
Any help is greatly appreciated..
thanks
Yugandhar
[email protected]

Hi
thanks for the info...looks like MGP_DELAY parameter works only when MGP is started as an NT service..thats why it didnt work on our case..
we have modified mgp.bat file to take into account the time delay..
thanks
Yugandhar

Similar Messages

  • TS3474 Why does my iPod Nano turn off after one minute of use?

    I just got a new 16 GB iPod Nano and it turns off after one minute of use.  Why does it do this?

    I figured it out.  Headphones were not plugged all the way in.  This support community is awesome.  Thanks everyone.

  • My nano starts playing a selection then turns off after one minute

    My nano starts playing a selection then turns off after one minute

    Problem solved for now.  Cleanded the jack port with a q-tip and pushed the cable in harder.  Seems to be working.  Thanks to all others who posted these past suggestions.

  • Yoga Pro 2 screen shuts off after one minute of inactivity

    I have configured the Power options so that the screen shouldn't dim on either battery or power cord and the laptop shouldn't sleep. I don't have a screen saver on. I even removed the "Energy Manager" bundled app hoping that might work. Hugely annoying. Any advice appreciated!
    Solved!
    Go to Solution.

    This may be a Windows 8 issue. I finally fixed this problem by identifying the screen saver as the issue (and I wasn't using a screen saver).  Type "lock the computer" into the search box after clicking the search charm, which brings up the screen saver dialog box. Mine was set to 1 minute, though I'd never set it myself. If you can't change it, choose a screen saver and you should be able to do so (and can then switch back to no screen saver).
    BUT, here's the problem. Other things you install (or settings within things you install) can apparently change and override whatever you type in for the delay time. Try applying your new time and exiting from the dialog box, then open it back up again. I was finding that it kept going back to 1 minute. To reset things so that you can get control again, type "user accounts" into the search box and when the dialog box comes up, choose "Reset Security Policies". Then you can go back to the screen saver dialog and successfully change the delay time.
    See http://social.technet.microsoft.com/Forums/windows/en-us/ace4085a-b0ba-4a98-898d-cd92d9e88e13/window... for some detail.

  • My nano turns itself off after one minute while connected to an auxiliary cable, not while plugged into a dock.  I have checked and double checked to see that the cable is plugged in tightly.  I restored the ipod on itunes.  Ideas?

    A support tech at Best Buy couldn't figure out the problem...hopefully someone out there has an idea for me.

    Problem solved for now.  Cleanded the jack port with a q-tip and pushed the cable in harder.  Seems to be working.  Thanks to all others who posted these past suggestions.

  • Aol email logs off automatically after one minute

    It hasn't been a problem until recently. Can't seem to alter my "preferences" to any affect.

    Hi,
    May be you can try to boot into safe mode for test, or create a new account.
    In addition, netplwiz is a command to open Manage User Accounts. I doubt whether you had use it correctly.
    Press WIN+R, then type netplwiz , press
    Enter.
    Roger Lu
    TechNet Community Support
    I booted into Safe Mode (after figuring out the new method) and it logged me out after one minute.  I logged back in, created a new user, rebooted in normal mode, logged in as new user, was logged out after one minute.  Double-checked Advanced
    Power settings again -- nothing indicating this should be happening.

  • HP 15-f009wm shuts down after one minute

    HP 15-f009wm, shuts down after one minute at idle. If you are doing something on it, like moving the mouse, it will stay on. I tried to go in, and change the power plans, and the options pertaining to this, but no help at all. I even tried to take the password off, so my wife wouldn't have a hard time trying to put it in, everytime it shuts down.  I seen the option, marked it, and it still needs the password to open it.

    If you have a virus and malware infestation, they you will have to certainly address that. This might be a good starting point to attempt to clean your system: Resolving and Preventing Viruses on Your Computer (Windows 8)
    This is one way you can prevent or at least reduce potential infection in the future:
    Using Windows 8 Defender to Prevent Virus and Spyware Problems
    Some virus and malware are very tough to remove. This may be the quickest way to clean your system and start over. If you do this, you may want to take the time to clean any external drives you may have (ie. USB Sticks) as to not potentially infect your system again: Performing an HP System Recovery (Windows 8)
    I hope this helps.
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Windows 8.1 automatically logs me out after one minute

    I downloaded and installed Windows 8.1 Pro a few days ago from TechNet. I'm logged in only with my Microsoft account (not a Domain account).
    For some reason, it logs me out automatically after one minute and takes me back to the login screen where I have to click and enter my password in. I checked all of the Power settings and the Screen Saver is off.
    Also, I've wanted to disable the login screen entirely since I live alone.  I've seen many articles about being able to disable it by unchecking the box in the netplwiz app, but the option doesn't even exist.
    Thanks in advance!

    Hi,
    May be you can try to boot into safe mode for test, or create a new account.
    In addition, netplwiz is a command to open Manage User Accounts. I doubt whether you had use it correctly.
    Press WIN+R, then type netplwiz , press
    Enter.
    Roger Lu
    TechNet Community Support
    I booted into Safe Mode (after figuring out the new method) and it logged me out after one minute.  I logged back in, created a new user, rebooted in normal mode, logged in as new user, was logged out after one minute.  Double-checked Advanced
    Power settings again -- nothing indicating this should be happening.

  • Rented movie but it kept freezing after one minute of play -help please

    Rented a movie on Apple TV but it kept freezing after one minute of play - help please

    Try waiting a few minutes, or longer, to see if the beachball goes away. Start up iTunes, then go do something else for awhile. Perhaps iTunes is going some overdue bookkeeping and once you let it do it it will work again.

  • 15"Macbook Pro shuts off after 5 minutes when using full-charged battery.

    15"Macbook Pro shuts off after 5 minutes when using full-charged battery.  If not touched, computer stays on.  But start typing, it shuts off.  Was told this was a fan problem.  Had fan replaced last spring.  But problem has begun again.  Is this a battery issue or somethig else?

    Charge Information:
      Charge remaining (mAh):          3747
      Fully charged:          Yes
      Charging:          No
      Full charge capacity (mAh):          3899
      Health Information:
      Cycle count:          90
      Condition:          Good
      Battery Installed:          Yes
      Amperage (mA):          0
      Voltage (mV):          12382
    It says it looks fine....

  • Iphone 4s sound gets blank for 3-5 secs after one minute we call

    I have iphone 4s and in a call the sound gets blank for 3-5 secs after one minute we call , this happens every time and is not dependant on the carrier.
    its very irritating

    S2KRo ....
    I just got off the phone with Apple and I think you are right about the "selling for the Iphone 5".  She told me she could get me someone that can fix it but I first had to pay $120 to be transfered.  She also said that it's not the system update because they have had a LOW volume of calls for this issue. 
    I hung up with her and I'm gonna call back in a bit and see if I can get to the bottom of it. 

  • Shooting a video works sometimes, but sometimes it shuts off after one second without recording any video

    Have had the Turbo Droid for only 3 days and just tried to shoot video. Twice it worked, but more often it seems to begin recording, but shuts off after one second without recording anything.
    Not sure what I'm doing wrong to cause this to happen.
    Can you help?
    Thanks!

    Thanks, EfrainM_VZW.
    Haven't seen any error messages. Occasionallly, but only rarely, the video will record 1-2 frames, but most of the time it just shuts down. I have tried it with and without the rubber-grip case; taking off the case had no effect. The video still would not function.
    When you tap the video camera icon, it tries to shoot video and seems to begin to record, but one (or two) second(s) later, it beeps and stops. Rarely with a frame or so of video; mostly nothing is recorded.
    The still camera works great! Love being able to touch it anywhere to grab a snap.
    BTW, my partner and I got identical phones at the same time last week. His video has the exact same problems as my phone.
    Another point: I downloaded the Google Camera and can shoot video just fine through that camera. But not through the stock Motorola camera that came with the Droid Turbos.
    I'm starting to think we got phones from a defective batch.
    What do you think?

  • Yoga display turns off after 1 minute

    I'm having an annoying problem with my new Yoga related to the display and have not seen any other posts with a similar complaint so perhaps this is a simple fix that I'm just not able to sort out on my own. My display turns off after 1 minute of inactivity. The only means for changing behavior like this that I am aware of is through the Control Panel Power Options. My settings for "turn off the display" are 10 minutes on battery and Never while plugged in (note screen shot attached). Regardless of my settings, the screen turns off after 1 minute. I've changed the settings to multiple configurations and restarted with no change in behavior. Perhaps there's some other settings area, maybe something specific to Lenovo that I'm not aware of (since this is my first Lenovo laptop). Anyone with similar problems or insight?

    This may be a Windows 8 issue. I finally fixed this problem by identifying the screen saver as the issue (and I wasn't using a screen saver). Type "lock the computer" into the search box after clicking the search charm, which brings up the screen saver dialog box. Mine was set to 1 minute, though I'd never set it myself. If you can't change it, choose a screen saver and you should be able to do so (and can then switch back to no screen saver). BUT, here's the problem. Other things you install (or settings within things you install) can apparently change and override whatever you type in for the delay time. Try applying your new time and exiting from the dialog box, then open it back up again. I was finding that it kept going back to 1 minute. To reset things so that you can get control again, type "user accounts" into the search box and when the dialog box comes up, choose "Reset Security Policies". Then you can go back to the screen saver dialog and successfully change the delay time. See http://social.technet.microsoft.com/Forums/windows/en-us/ace4085a-b0ba-4a98-898d-cd92d9e88e13/window... for some detail.

  • Very slow first Mobile Service call after one minute incativity

    My mobile service api (basic tire) response about 30 sec delay for the first call. The subsequent calls are fine but the first call even sometimes times out. Which is totally unacceptable. The worse is that after one minutes inactivity it stars again.
    It uses SQL Server (Standard tire) which is the culprit I guess. Because if I do a manual db query before
    the time lag of the api call disappear. I set up automated api calls  requesting db quires in about every minutes but did not helped. Looks like they are screened. 
    What should I do until I have enough customers to get an api call every minutes?
    It's a quite important issue because due to the bad user experience the app will never have enough customers.

    I have done a lot of testing to gain more accurate data about the case. It's quite time consuming because I have to wait some minutes after each testing. I focused this time only one of my stored procedure and measured it from the app, from browser and from
    VS SQL Server and turned out I was wrong there is a similar significant time lag from all method and if I wait enough about half an hour in all method the stored procedure call will time out. Thus, the underlying issue is probably in SQL Server.
    The VS SQL Server provides the following error massage:
    Msg 4083, Level 16, State 1, Procedure likingProbability, Line 51
    The connection was recovered and rowcount in the first query is not available. Please execute another query to get a valid rowcount.
    The actual rowcount in the code:
    SELECT @howGood = howGood FROM goodforme.Scans WHERE itemId = @itemId AND userId = @userId
    IF (@@ROWCOUNT > 0 AND (@howGood = @MAX_RATE OR @howGood = @MIN_RATE))
    BEGIN
    SET @howGoodPrediction = @howGood
    RETURN
    END
    For me it looks like the rowcount should be valid. 
    In the second call the response is valid but with huge delay like 20 sec, but in the subsequent calls it's linearly reduced to about 1 sec. And if the next call happens about 30 sec later the response will have increase again to about 10 sec time lag and so
    on. Thank you for helping to solve the issue.

  • My iPad does not automatically shut off after several minutes of non use. I can shut it off with the on/off switch. What can I do to get the auto sut off feature back?

    My IPad does not automatically shut off after several minutes of non use as it had been doing a few days ago  How can I restore this auto feature?

    Settings>General>Auto-Lock and select an Auto-Lock time (the "Never" setting will of course never auto-lock the device)

Maybe you are looking for

  • How to add TAB functionality in module pool screen

    Hi, I have created a screen with two fields(input/output).My requirement is generally cursor is in the first field when user pressed TAB key then cursor has to move to second field.How can i fulfil this requirment. Thanks, shyla

  • How to Load image from file

    Hi all I want input Image into Forms Igame from a file using file open methods what should i do i am test some code from oracle 10g Docs but facing an error ORA-06508 i thing some thing is missing in configration file Need Help Waiting for reply Take

  • How do you make folders directly in your email on an iPad

    How do you make folders in your email on an iPad 2?

  • USB Video Class Driver on Solaris 10 and Sun Ray

    Hello, Is it posible to use the USB Video Class Driver (usbvc) on Solaris 10 and Sun Ray? How can I do that? Thank you very much.

  • Closing web browser

    Anyone have an idea as to how to close an open page in safari? User's manual on page 55 says you can't close it, without explaining it why. You can close any additional open pages by touching the red x, but a red x doesn't appear on the first web pag