MI 2.5 mobile client compatibility with MI server on SAP Netweaver 7.1

Hi folks,
Please let me know if Mobile client 2.5 on a laptop or Mobile is compatible with MI server on SAP Netweaver Mobile 7.1.
We are planning for mass migration of devices with data to be moved from SAP netweaver 2004 to SAP Netweaver Mobile 7.1
Keep in mind we will still have the old version of MI client that is MI 2.5 mobile client
Regards,
Kalyan

Dear Kalyan,
That is what I tried to explain briefly in your other thread.
No. you cannot use the 2.5 client to connect/ sync with 7.1 server. Even when the device info is migrated to the server, devices are handled in a different way in 7.1. For example in 2.5,7.0 you sync to get an id. In 7.1, you create a device (Data Orchestration Engine Admin)  and enable it. When you syn the client for the first time, this gets assigned to the client or in other words, the client is authenticated to a new device.
Please note that there are a whole lot of other things that are different in 7.1.
Hope that gives a better picture. Check out the help.sap.com link for 7.1 (unfortunately u may have to read a lot in different parts of the help tree to get a better understanding, but as I said earlier, forum posts cannot be too elaborate and most of the posts if you see, tend to be abstract) Also why try to abstract something when the full details are available online @ help.sap.com or sdn help documents
Regards,
Veera

Similar Messages

  • Essbase 6.1.4 Client compatibility with Win-Server 2008.

    Hi Friends,
    I am looking to install Hyperion Essbase 6.1.4 Client Version on Windows Server 2008.
    Can you please let me know if this version is compatible with the Windows Server 2008?
    TIA,
    KRIS

    In addition to Nathan's comments this would be a platform that Oracle hasn't regression tested. So even if it were to appear to work if you encountered an issue Oracle would be justified and asking you to re-create the same issue on a supported platform.
    In my opinion if this is a production application this is a risk you should not take.
    If you are playing with an internal environment and want to learn more about Win2K8 that's one thing. Realizing most folks will give you the "It's not supported line" when you start asking why EPMA, FDM, and HFM do not work with IIS 7.x
    Regards,
    John A. Booth
    http://www.metavero.com

  • WLS :: Will Vista web client work with Weblogic Server 8.1.6 over SSL?

    Hello,
    I have installed 51-2 bit SSL cert on weblogic 7 and found that the secure site doesn't work on Vista web client.
    Weblogic gives error in handshaking and says algorithm is not supported.
    Vista web client uses some algorithms which were not supported by weblogic 7.
    So would like to know if would Vista web client work with Weblogic Server 8.1.6 over SSL?
    Any information in this regard would be helpful.
    Thanks in Advance.

    can you use the following debug flags in the weblogic server as java_options and paste the complete ssl handshake exception here.
    -Dweblogic.StdoutDebugEnabled=true
    -Dssl.debug=true
    thanks,
    sandeep

  • SQL Server 2012 Standard compatibility with Windows Server 2012 R2 Standard

    Hi,
    Is SQL Server 2012 Standard compatibility with Windows Server 2012 R2 Standard.
    In volume licensing portal Windows Server 2012 R2 Standard is not provided in the list of OS supported for SQL server 2012.

    Hi Ajit,
    Besides other post, please also note that
    Service Pack 1 or
    a later update is needed for the support of SQL 2012 on Windows Server 2012 R2.
    For more details about how to use SQL Server in Windows Server 2012 R2, please review the following KB article.
    http://support.microsoft.com/en-us/kb/2681562
    Thanks,
    Lydia Zhang
    Lydia Zhang
    TechNet Community Support

  • SAP Mobile Platform 3 compatibility with windows server 2012

    Dear All,
    As per SAP release notes Window Server 2012 is compatible with SMP 3.0 but after installation i see that the SMP3 Services are always into the hung state meaning they neither start nor stop. They are always in the starting state. Whereas it runs fine with Windows Server 2008 R2. When we force kill all the process running with SMP3 Service we can stop it but it doesn't start at all.
    Has anyone faced this issue till now.
    Thanks

    Hi Rakshit,
    I guess Eric Solberg, Mustafa Saglam can answer better.
    Rgrds,
    JK
    PS: Raise a SAP ticket.
    Message was edited by: jitendra kansal

  • Client 10g with XE Server  ORA-12560

    Hello,
    I have compatibility problem with the XE version. For development, I use a XE server.. With the XE client on a computer I can successfully access to the XE server.
    But with a full 10g Linux client I can't access the same XE server. I have the error ORA-12560.
    The server is running (While i can connect to him with another client)
    The client si working (While i can connect to the production server 8.1.7 Oracle server)
    The client and server are on RedHat ES 4
    Thanks in advance for any idea
    Regards
    Jeff

    Hello again.. I finnaly found the problem.. It came from IP route between my client and server..
    So Oracle 10g CLient can work with XE server :)
    Regards
    JEFF

  • Is RH7 client compatible with X4 server ?

    I am evaluating RH7 (client version) to see whether we should
    upgrade from X5. So far, I am very happy with the new features
    especially being able to open more than one topic at a time.
    We create a combination of WebHelp Pro and HTML Help
    projects. Currently, we publish our WebHelp Pro projects to the X3
    server version on a Windows 2000 operating system. I find that,
    when I open a project that I generated with RH7, the bookmarked
    text does not open. Also, some topics appear with the message: Page
    cannot be found. I'm assuming that the problem is that we are
    publishing a RH7 project to an X3 server version on a Windows 2000
    operating system
    We have the X4 server version, but we haven't installed it
    because of the Windows 2000 operating system. If we upgrade to
    Windows 2003, can we use RH7 (client version) with the X4 server
    version? Or, do we need to purchase RoboHelp Server 7?
    Thanks,
    Liz

    If it did Liz I'd suggest it is wrong. Just like once you'd
    upgraded a RH6 project to RH7 you can not go back, because of the
    changes to the HTML code and the Unicode support, if you have RH7
    only RH Server 7 can be used for WebHelp Pro output as only that
    version understands the underlying HTML and Unicode support. I did
    check this recently with Adobe before responding to a similar query
    from another user.

  • Which version of Coherence is compatable with Weblogic Server 10.0 MP2

    Want to know :
    Which version of Coherence is compatable with Weblogic 10 MP2.
    Is it that Coherence is supported only on WebLogic Server 10.3 and above?

    Hi Anup,
    Maybe you should be a bit more specific about what you want to do. Coherence is just Java and has been supported WebLogic for years in the same way most other third-party Java libraries and APIs are. I first started using Coherence about four or five years ago with WebLogic 8.
    JK

  • Sun Portal Server 6 compatibility with Web Server 6.1 SP - 8

    Hi,
    Our client is running on Sun One Portal Server Version 6.0, which is deployed on Sun One Web Server ver 6.0, there is a request from the hosting provider to upgrade the web container to Web Server 6.1 SP8. My question is � Is Sun One Portal 6.0 (with AM 5.1 and DS 5.1 SP4) capable of / compatible with Web Server 6.1 SP - 8 ?
    Do you see any issues with going ahead with the upgrade?
    Thanks much for all your responses!

    We upgraded our Sun Webserver to SP8 and had no issues. We are running
    - Portal 6.2
    - IS 6.1
    - DS 5.1

  • RoboSource Control 3.1 compatibility with SQL Server R2

    Are there any compatibility issues between RoboSource Control 3.1 and SQL Server 2008 R2?
    We are looking to upgrade the server on which our repository resides.
    Appreciate any input!!

    According to this KB article SQL Server 2008 is not supported. I've also seen similar posts to yours in the past asking whether anyone has got RSC 3.1 to work with SQL Server 2008 but no one responded. To be honest there aren't a huge bunch of RSC users here.
      The RoboColum(n)
      @robocolumn
      Colum McAndrew

  • Mobile devlopment workstation and Mobile client install on same server

    Hi,
    Can we install Mobile development workstation and mobile client on same server?
    I have already installed mobile development workstation , but when i try to install mobile client on same server it says that add,remove ,modify option install screen. It lis not allowing me to enter new screen.
    Any idea.
    - tom

    When you install the MD Workstation you are opted to choose among different applications i.e. mobile sales, mobile service, mobile system maintenance or authorization management tool. You can there choose the application to install besides the installation of the MD Workstation.
    If you want to add application(s) later, you have to choose 'modify' and choose all parts for the MD Workstation plus the applications. If you omit options chosen before when doing the first installation then these will be removed. So be shure to choose ALL relevant things for the application as well as for the MD Workstation.
    You can also generate the application from the installed repository, there are several notes on this subject available ('how to generate an application') which are referred to in about any installation guide or note changing the msa coding.
    Regards Kai

  • Compatibility with Windows server 2003

    How about the compatibility with Oracle AS en windows server 2003 (32-bit) ? I want to install AS on a windows server machine but the versions you can download on the site don't seem to be compatible whit the 32-bit version.
    Does anybody has some experience with this issue already ?
    Thx in advance,
    Cliff

    HI,
    sap supports
    English international version of one of the following:
    Windows Server 2003 Standard Edition
    Windows Server 2003 Enterprise Edition
    Windows Server 2003 Datacenter Edition
    regards,
    kaushal

  • Sharepoint Foundation 2010 compatibility with SQL Server 2014

    Due to a requirement to use Sharepoint without Active Directory access.  I am trying to find explicit confirmation whether Sharepoint Foundation 2010 is compatible with SQL Server 2014.  I have seen that Sharepoint Server 2010 and 2013 are compatible
    with SQL Server 2014 as of CU 1 (released in April).  But there is no mention of Sharepoint Foundation.
    This chart is great except it doesn't mention whether the Foundation versions are supported.
    http://msdn.microsoft.com/en-us/library/gg492257.aspx
    Thanks.

    Note that that is for the Reporting Services component, but not necessarily for the SQL Database Engine component (which comes from the SharePoint Product Group, rather than the SQL Product Group). I haven't seen any confirmation that SharePoint 2010 is
    supported at all with SQL 2014 as a Database Engine.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • JMS Compatibility with Windows Server 2008

    Our product uses the JBoss 4.0.4 as an application server. Currently we are supporting Windows Server 2003 and planning to support Windows Server 2008. We want to know that is JMS fully compatible with Windows Server 2008 (64 bit)?
    Please respond if anybody has any idea.
    Thanks

    JMS services are provided by your container (JBoss) not your operating system.
    You should just make sure that your container version is supported on your operating system version.

  • RH Server 9 compatibility with Windows Server 2008 SP2/SQL Server

    Our tech support people are preparing for a first install of RH Server 9. They have asked me to find out whether there is a recent patch that would enable it to work with Windows Server 2008 SP2 64 bit and MS SQL Server 2008.
    If there is not yet a patch, will there be one for this OS/DB combination in the future, and when?
    This is in reference to the knowledgebase article at http://kb2.adobe.com/cps/884/cpsid_88483.html which gives a "not recommended" status to this combination.
    Our infrastructure team would prefer to use this combination if it is possible.
    Second question from the tech team: Do we need to separate the RoboHelp application from the database or can they both reside on the same server?

    To answer your first question, no there is no patch to allow SQL Server 2008 to run on a 64 bit server. To answer your second question, I don't know. This is a user to user forum and therefore we are not party to any discussions on when or if a patch will be released. You could sumbit a feature request which the Adobe RoboHelp Product Manager will get. This will help advance your case. You can submit it here:
    http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
      The RoboColum(n)
      @robocolumn
      Colum McAndrew

Maybe you are looking for

  • (Solved) NFSv4 - Files ownership wrong, idmap domain correct

    I have an arch server the is exporting the home directories for my users over a local network. Currently there are 2 arch servers mounting at export to their /home. The accounts exist on an Active Directory server that all three are plugged into via

  • Inconsistent Message status of Outbound messages in AIF

    Hello All We are using SAP AIF for outbound processing where message is failing in SXMB_MONI due to communication error (e.g. Password wrong , SAP PI down etc) however AIF shows messages as successful in this case. Ideally AIF should show messages as

  • Can't open pdf files using lion

    Hi! I really hoping someone can help me here. I can't seem to open PDF files. I get the spinning beachball for a while then the screen freezes. Is there a workaround for this? Many thanks in advance! Dave

  • My LR2 is missing the templates can anyone help?

    I am in LR2, print mode/contact sheet/grid. I have 36 photo's I am attempting to template in a 4x5 contact sheet. However my templates are empty and I am so new to the program I do not know what to do. This assignment is due today and I have ran out

  • Toshiba 16gb micro SDHC card problem, please need help!

    Hello, I didnt know where to post about this problem, so I just post it here. I bought few months ago Toshiba 16gb micro SD HC card for my android Huawei Acend G300 it worked fine for two months, in computer and in my phone, but yesteday after I list