MI 21 printing in back ground

Hi All,
I want to schedule printing of Physical Inventory documents in background, i.e. I want to schedule MI21 transaction to run in the background.
Actually I am able to do the same by specifying all the necessary parameters including printer as LOCL. System generates the spool which shows the documents that will get printed, however printing never happens i.e. spool status always remains in waiting.
The spool that was created yesterday is still in the waiting status.
Can anybody tell me if I am missing anything. Do I need to check anything in config or anything from Basis needs to be done.
thanks,
Ritesh

You need to run the background job using SE37.
Pl check the following thread:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/709537c1-dad1-2c10-2b88-c972afef301a?QuickLink=index&overridelayout=true

Similar Messages

2600n printing grayish back ground.

Greetings, my 2600n prints a light grayish back ground like the texture of wall paper 80% of the time. Some printing jobs are darker than others. Color is still great! What could be the cause of this? Any suggestions? Thanksan smileytongue:

i think the transfer belt is faulty in ur printer.

Back Ground Job Printing Problem

Dear Experts,
We schedled one back ground job with spool generation. Ecery thing is working fine but in printing selecton parameters are printing along with out put data.
That means, if i gave 1000 materials in my variant, in spool first 1000 materials are printing an then actually out put is printing. i need to avoid these printing of selection set.
Please help me...
Thanks in advance

Hello,
Pleas find if there is any "PRINT_SELECTION" function module in report, which should be responsible for printing selection screen parameter values.
Thanks.

Back ground printing in all balck

I just bought a new HP Laserjet M451DN color printer when I turn the color off to print in black and white all my pdf's print with a black back ground i'm using adobe reader 11 (Xi) I have went in and made sure it says to print text black and back ground white but this does not fix the problem. Please help.

I had the same problem when I upgraded my iMac OS to Mavericks and was forced to install Reader IX. The solution turned out to be printing an image rather than a PDF document. In the ADVANCED settings on the print page there is an option to print an image and this got around my problem.

Need to restrict Print out in back Ground Job

Hi all,
The T.Code COHVPI will use for mass processing of Relealse process order. It the same time it will give print out for all process orders which are successfule change status to REALEASE status.Presently it is running forground Job , it is givind print out for process order shopfloor paper.
NOw Client wants to run in Back gorund for tcode COHVPI , But it is running fine. But Clinet does not want print outt when it runs in the back ground. After my analysis , we can restrict print out with SY-batch eq 0 in the print program of Forms.
But the process order status is changed to with Print out happend in the user status .
Now i need to restict to change to status of PRINT OUT of process orders.
Let me know i can i achive this requirement.
Thanks in Advance,
Regards,
JBR

Hi,
Thanks for quick reply.
We need restict this status only if tcode COHVPI runs inn Back gorund.Remaining cases it needs to be working as of now is fine.
Is there any way to restict through code?
Thanks& Regards,
JBR

I have a photosmart plus b210 e print and when I print with a black back ground I get lines

I have a photosmart plus b210 e print and when I print with a black back ground I get lines. What can I do to eliminate the
lines in the photo
Thank You

Hey appollus,
Do you get these lines only when printing with ePrint? If not, it sounds like a printhead issue. Here are the steps to fix the issue.
1. Go to the setup menu on the printers front screen.
2. Go to tools.
3. Go to clean printhead
You may need to do this a few times to completely remove the lines in the print.
Although I am an HP employee, I am speaking for myself and not for HP.
If I have resolved your issue, feel free to provide Kudos and make sure you mark this thread as solution provided.

Problem when printing Alv Tree Report in back ground

Hi,
I am using SUBMIT ...TO SAP-SPOOL WITHOUT SPOOL DYNPRO with GET_PRINT_PARAMETERS FM.Its working fine.
My problem is that my SUBMIT report have TREE STRUCTURE as output so when i am running my program one blank screen is coming with heading DISPLAY LOG TREE because of TREE STRUCTURE.when i click on back button then only further processing happens.
How to avoid this TREE STRUCTURE SCREEN ???
Is there any other way to pass your list o/p to SPOOL other than .....TO SAP-SPOOL..?
Thanks in advance.

in foreground when u run ALV report it holds maximum fields and displays in 1 single row, but the case is not in back ground...When any report is run in background, the default size for a line is 255 chars...So, if it more it gets splitted into 2 line item....This is how back ground job works for a report though it is a normal report or alv report.

Back Ground Job Issue

Hi,
My report program was executing successfully in the Foreground but not in the back ground.. Can any one help me on this?
My report program has a selection screen..I entered the data for it at and through menu option Program->execute in background..I executed it..As it asked for output device i gave LP01 and No of copies to 1. and checked Radio button Print all. and clicked ok.
It asked me for start time and i selected Immediate and clicked on save.
It gave a status message "Back ground Job Scheduled".
Now when i look through SM37 under my name the job is always active and Never finished.
Can any one help me on this?
Thank in advance..

Just check whether the job is running in the background or not
Double Click on the job name and take the Server & Process Id.
Go back to the SM37 Screen.
Click on Application Servers or directly Open the transaction SM51.
Select the Server and find the process Id with the help of the things you found already
Now, you can see the database level.
Check if the values or moving or not. This way you could track the details
If not, Ask BASIS guys to check whether the job is reading from rollback or not.
If it is, cancel and rerun the job...or else..leave the job..it will finish off in some time.
Hope everything is clear

Back ground job scheduling(urgent)

Hi all,
can anybody will help me ,regarding the step by step procedure to schedule the background job.
i have to do back ground job scheduling for one program so that in that specified time my report will execute?
plz suggest.
ur idea will be highly appreaciated.
Regards
pabitra

HI
Please follow the below steps to schedule a background job.
First - create a Report-Variant for your print programm using the SE38.
Then...
1.) Call the transaction SM36
Enter a Job Name / You may set a job class other
than 'C' (See online Help on that field).
2.) Push the STEP Button
3.) Push the ABAP Program button
Enter der programm name an the variant name
save that window
4.) Push "BACK"
5.) Push "Start Condition"
6.) Push Date/Time
Enter Date + Time for the first start
Mark "Periodic Job" !!
7.) Push "Period Values"
Set the period you want the job to be started
Save everything
For more info please refer to this link:
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/c4/3a7ed1505211d189550000e829fbbd/content.htm">Background Processing</a>
Kind Regards
Eswar

Back ground job sheduling

Hi SAP guru's
if I execute alv list display and alv grid display in back ground is there any difference.
is it possible printing a logo in back ground job schedule.
Points will be rewarded.

Hi Durga, this will help u.
Some differences:
a) from abap coding point of view,
alv list is done with Function modules,
alv gris can also be done with FM,
but can also be done using OO concepts.
b) Alv grid (using oo concept) requires
designing the screen layout .
Hence, in one screen, we can show more
then one alv grid
(we cannot show more than
one alv list on one screen)
c) ALV grid uses ActiveX controls
present on the Presentation Server.
Hence, it consumes More Memory
on the presentation server.
d) ALV LIST is Display Only.
Whereas
ALV Grid Can Be made EDITABLE for entry purpose.
e) In alv grid, these options are possible,
but not in alv list.
without horizontal lines
without vertical lines
without cell merging during sorts
display total lines above the entries
ALV LIST Can be coded using only FMs
ALV GRID Can be coded using FMs and object oriented concepts
ALV LIST Can be displayed hieraicharlly
ALV GRID cannot be displayed hierarichally
Also, I am sending LOGO report, pls check it.
REPORT YMS_EXCISE MESSAGE-ID E4 NO STANDARD PAGE HEADING LINE-SIZE 350. .
TABLES : J_1IEXCHDR, " header table
J_1IEXCDTL, " item table
J_1IPART2, " Excise Part II details
LFA1, " vendor master table
J_1IMOVEND, " vendor excise details table
MSEG, " Document Segment: Material
MKPF, " Header: Material Document
DD07T, " domain text table
T001W. " Plant and Branch Details
DATA : BEGIN OF IT_CHDR OCCURS 100,
DOCNO LIKE J_1IEXCHDR-DOCNO,
DOCYR LIKE J_1IEXCHDR-DOCYR,
EXNUM LIKE J_1IEXCHDR-EXNUM,
EXDAT LIKE J_1IEXCHDR-EXDAT,
WERKS LIKE J_1IEXCHDR-WERKS,
EXBED LIKE J_1IEXCHDR-EXBED,
EXCCD LIKE J_1IEXCHDR-EXCCD,
ECS LIKE J_1IEXCHDR-ECS,
END OF IT_CHDR.
DATA : BEGIN OF IT_CDTL OCCURS 100,
DOCYR LIKE J_1IEXCDTL-DOCYR,
DOCNO LIKE J_1IEXCDTL-DOCNO,
EXNUM LIKE J_1IEXCDTL-EXNUM,
EXDAT LIKE J_1IEXCDTL-EXDAT,
LIFNR LIKE J_1IEXCDTL-LIFNR,
MATNR LIKE J_1IEXCDTL-MATNR,
MAKTX LIKE J_1IEXCDTL-MAKTX,
CHAPID LIKE J_1IEXCDTL-CHAPID,
EXBAS LIKE J_1IEXCDTL-EXBAS,
EXBED LIKE J_1IEXCDTL-EXBED,
ECS LIKE J_1IEXCDTL-ECS,
MENGE LIKE J_1IEXCDTL-MENGE,
MEINS LIKE J_1IEXCDTL-MEINS,
RDOC2 LIKE J_1IEXCDTL-RDOC2,
END OF IT_CDTL.
DATA TEXT(10).
DATA : BEGIN OF IT_OUT OCCURS 0,
SERIALNO LIKE J_1IPART2-SERIALNO,
TEXT1 LIKE TEXT,
EXNUM LIKE J_1IEXCDTL-EXNUM,
EXDAT LIKE J_1IEXCDTL-EXDAT,
NAME LIKE LFA1-NAME1,
DDTEXT LIKE DD07T-DDTEXT,
EXCCD LIKE J_1IEXCHDR-EXCCD,
BUDAT LIKE MKPF-BUDAT,
EXBAS LIKE IT_CDTL-EXBAS,
EXBED LIKE IT_CDTL-EXBED,
ECS LIKE IT_CDTL-ECS,
MATNR LIKE IT_CDTL-MATNR,
MAKTX LIKE IT_CDTL-MAKTX,
CHAPID LIKE IT_CDTL-CHAPID,
MENGE LIKE IT_CDTL-MENGE,
MEINS LIKE IT_CDTL-MEINS,
DEL_IND(1),
END OF IT_OUT.
DATA IT_PART2 LIKE J_1IPART2 OCCURS 0 WITH HEADER LINE.
DATA S_NO(4) .
DATA DB_CNT LIKE SY-TABIX.
DATA EBELN_T LIKE MSEG-EBELN .
TYPE-POOLS : SLIS.
DATA : AFIELD TYPE SLIS_FIELDCAT_ALV.
DATA : LIST_HEADER TYPE SLIS_T_LISTHEADER,
FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
LS_FTCAT TYPE LVC_S_FCAT,
SORTCAT TYPE SLIS_T_SORTINFO_ALV,
SORTCAT_LN LIKE LINE OF SORTCAT,
G_REPID LIKE SY-REPID,
G_BACK_GROUND(70), "like bapibds01-objkey,
GS_VARIANT LIKE DISVARIANT,
G_SAVE ,
GT_EVENTS TYPE SLIS_T_EVENT,
ALV_EVENT TYPE SLIS_ALV_EVENT,
EVENTCAT TYPE SLIS_T_EVENT,
EVENTCAT_LN LIKE LINE OF EVENTCAT,
LAYOUT_IN TYPE SLIS_LAYOUT_ALV,
LAYOUT_IN1 TYPE SLIS_LAYOUT_ALV.
CONSTANTS : GC_FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE
'TOP_OF_PAGE',
GC_FORMNAME_USER_COMMAND TYPE SLIS_FORMNAME VALUE
'USER_COMMAND',
GC_FORMNAME_BEFORE_OUTPUT TYPE SLIS_FORMNAME VALUE
'BEFORE_OUTPUT'.
ALV_EVENT TYPE SLIS_ALV_EVENT,
DATA EX_NO LIKE IT_CHDR-EXNUM VALUE 0.
DATA REGTYP_1 LIKE J_1IPART2-REGTYP.
SELECTION-SCREEN BEGIN OF BLOCK B WITH FRAME.
PARAMETERS WERKS TYPE J_1IEXCHDR-WERKS.
SELECT-OPTIONS : BUDAT FOR J_1IEXCHDR-EXDAT.
PARAMETERS : R1 RADIOBUTTON GROUP GRP DEFAULT 'X',
R2 RADIOBUTTON GROUP GRP.
SELECTION-SCREEN END OF BLOCK B.
INITIALIZATION.
G_REPID = SY-REPID.
G_SAVE = 'A'.
PERFORM BUILD_EVENT USING GT_EVENTS[].
PERFORM ALV_EVENT_INIT.
AT SELECTION-SCREEN.
REFRESH LIST_HEADER.
PERFORM TOP_OF_PAGE_LIST_HEADER USING LIST_HEADER.
START-OF-SELECTION.
PERFORM ALV_EVENT_INIT.
G_REPID = SY-REPID.
G_BACK_GROUND = ' ' .
IF R1 = 'X'.
CLEAR R2. CLEAR : REGTYP_1.
REGTYP_1 = 'A'.
set titlebar 'BALAJI' with DB_CNT.
ELSEIF R2 = 'X'.
CLEAR R1.CLEAR : REGTYP_1.
REGTYP_1 = 'C'.
set titlebar 'BALAJI1' with DB_CNT.
ENDIF.
SELECT * FROM J_1IPART2
INTO CORRESPONDING FIELDS OF TABLE IT_PART2
WHERE REGTYP = REGTYP_1 AND
TRNTYP = 'GRPO' AND
BUDAT IN BUDAT.
DOCYR = IT_CDTL-DOCYR AND
DOCNO = IT_CDTL-DOCNO.
LOOP AT IT_PART2.
SELECT SINGLE * FROM J_1IEXCHDR
INTO CORRESPONDING FIELDS OF IT_CHDR
WHERE TRNTYP = 'GRPO' AND
DOCYR = IT_PART2-DOCYR AND
DOCNO = IT_PART2-DOCNO AND
WERKS = WERKS AND
exdat IN BUDAT.
ORDER BY EXDAT.
IF SY-SUBRC = 0.
APPEND IT_CHDR.
ELSE.
CONTINUE.
ENDIF.
IF SY-SUBRC <> 0.
MESSAGE E084.
ENDIF.
ENDLOOP.
LOOP AT IT_CHDR.
SELECT * FROM J_1IEXCDTL
INTO CORRESPONDING FIELDS OF IT_CDTL
FOR ALL ENTRIES IN IT_CHDR
WHERE
TRNTYP = 'GRPO' AND
DOCNO = IT_CHDR-DOCNO AND
DOCYR = IT_CHDR-DOCYR AND
EXNUM = IT_CHDR-EXNUM AND
EXDAT = IT_CHDR-EXDAT AND
WERKS = IT_CHDR-WERKS.
IF SY-SUBRC = 0.
APPEND IT_CDTL.
ELSE.
CONTINUE.
ENDIF.
ENDSELECT.
ENDLOOP.
LOOP AT IT_CDTL.
CLEAR TEXT.
DB_CNT = DB_CNT + 1.
READ TABLE IT_CHDR WITH KEY EXNUM = IT_CDTL-EXNUM.
READ TABLE IT_PART2 WITH KEY DOCNO = IT_CDTL-DOCNO .
IT_OUT-SERIALNO = IT_PART2-SERIALNO.
SELECT SINGLE NAME1 FROM LFA1
INTO IT_OUT-NAME
WHERE LIFNR = IT_CDTL-LIFNR.
SELECT SINGLE * FROM LFA1
WHERE LIFNR = IT_CDTL-LIFNR.
IF LFA1-LAND1 EQ 'IN'.
TEXT = 'INVOICE'.
IT_OUT-TEXT1 = TEXT.
ELSE.
TEXT = 'BOE'.
IT_OUT-TEXT1 = TEXT.
ENDIF.
SELECT SINGLE * FROM J_1IMOVEND
WHERE LIFNR = IT_CDTL-LIFNR.
SELECT SINGLE * FROM DD07T
INTO IT_OUT-DDTEXT
WHERE DOMNAME = 'J_1IVTYP' AND
DDLANGUAGE = 'EN' AND
DOMVALUE_L = J_1IMOVEND-J_1IVTYP.
IF DD07T-DDTEXT = 'First Stage Dealer of indigenous excisable goods'
OR
DD07T-DDTEXT = 'Second Stage Dealer of indigenous excisablegoods'.
DD07T-DDTEXT = 'Dealer'.
ENDIF.
IT_OUT-DDTEXT = DD07T-DDTEXT.
ELSEIF DD07T-DDTEXT = 'Second Stage Dealer of indigenous excisable
*goods'.
DD07T-DDTEXT =
CLEAR EBELN_T.
SELECT SINGLE LFBNR FROM MSEG
INTO EBELN_T
WHERE MBLNR = IT_CDTL-RDOC2 .
SELECT SINGLE * FROM MSEG
WHERE BWART = '106' AND
LFBNR = EBELN_T ."and
ebeln = ebeln_t.
IF SY-SUBRC = 0.
IT_OUT-DEL_IND = 'X'.
ELSE.
IT_OUT-DEL_IND = ' '.
ENDIF.
SELECT SINGLE BUDAT FROM MKPF
INTO IT_OUT-BUDAT
WHERE MBLNR = EBELN_T ."MSEG-LFBNR.
IT_OUT-EXNUM = IT_CDTL-EXNUM.
IT_OUT-EXDAT = IT_CDTL-EXDAT.
IT_OUT-EXCCD = IT_CHDR-EXCCD.
IT_OUT-EXBAS = IT_CDTL-EXBAS.
IT_OUT-EXBED = IT_CDTL-EXBED.
IT_OUT-ECS = IT_CDTL-ECS.
IT_OUT-MATNR = IT_CDTL-MATNR.
IT_OUT-MAKTX = IT_CDTL-MAKTX.
IT_OUT-CHAPID = IT_CDTL-CHAPID.
IT_OUT-MENGE = IT_CDTL-MENGE.
IT_OUT-MEINS = IT_CDTL-MEINS.
APPEND IT_OUT.
EX_NO = IT_CDTL-EXNUM.
ENDLOOP.
Title Portion
IF REGTYP_1 = 'A'.
SET TITLEBAR 'BALAJI' WITH DB_CNT.
ELSEIF REGTYP_1 = 'C'.
SET TITLEBAR 'BALAJI1' WITH DB_CNT.
ENDIF.
AFIELD-COL_POS = 1.
AFIELD-FIELDNAME = 'SERIALNO'.
AFIELD-SELTEXT_L = 'INPUTS'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 2.
AFIELD-FIELDNAME = 'TEXT1'.
AFIELD-SELTEXT_L = 'TYPE OF DOC'.
AFIELD-JUST = 'L'.
AFIELD-DECIMALS_OUT = '0'.
AFIELD-NO_ZERO = 'X'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 3.
AFIELD-FIELDNAME = 'EXNUM'.
AFIELD-SELTEXT_L = 'DOC.NO'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 4.
AFIELD-FIELDNAME = 'EXDAT'.
AFIELD-SELTEXT_L = 'DOC.DATE'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 5.
AFIELD-FIELDNAME = 'NAME'.
AFIELD-SELTEXT_L = 'NAME OF THE SUPPLIER'.
AFIELD-NO_ZERO = 'X'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 6.
AFIELD-FIELDNAME = 'DDTEXT'.
AFIELD-SELTEXT_L = 'TYPE-OF-SUPPLIER'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 7.
AFIELD-FIELDNAME = 'EXCCD'.
AFIELD-SELTEXT_L = 'ECC OF THE SUPPLIER'.
AFIELD-NO_ZERO = 'X'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 8.
AFIELD-FIELDNAME = 'BUDAT'.
AFIELD-SELTEXT_L = 'INPUT RECV DATE'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 9.
AFIELD-FIELDNAME = 'EXBAS'.
AFIELD-SELTEXT_L = 'ASSESSABLE-VALUE'.
AFIELD-DO_SUM = 'X'.
AFIELD-JUST = 'R'.
AFIELD-DECIMALS_OUT = '2'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 10.
AFIELD-FIELDNAME = 'EXBED'.
AFIELD-SELTEXT_L = 'DET OF CREDIT TAKEN CENVAT'.
AFIELD-JUST = 'R'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 11.
AFIELD-FIELDNAME = 'ECS'.
AFIELD-SELTEXT_L = 'DET OF CREDIT TAKEN E-CESS'.
AFIELD-JUST = 'R'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 12.
AFIELD-FIELDNAME = 'MATNR'.
AFIELD-SELTEXT_L = 'MATERIAL-CODE'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 13.
AFIELD-FIELDNAME = 'MAKTX'.
AFIELD-SELTEXT_L = 'DESCRIPTION'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 14.
AFIELD-FIELDNAME = 'CHAPID'.
AFIELD-SELTEXT_L = 'TARIFF-ID'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 15.
AFIELD-FIELDNAME = 'MENGE'.
AFIELD-SELTEXT_L = 'QUANTITY'.
AFIELD-JUST = 'R'.
AFIELD-DO_SUM = ' '.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 16.
AFIELD-FIELDNAME = 'MEINS'.
AFIELD-SELTEXT_L = 'UOM'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 17.
AFIELD-FIELDNAME = 'DEL_IND'.
AFIELD-SELTEXT_L = 'Deleted'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
* LAYOUT FOR ZEBRA CATLOG
LAYOUT_IN-COLWIDTH_OPTIMIZE = 'X'.
LAYOUT_IN-ZEBRA = 'X'.
LAYOUT_IN-GET_SELINFOS = 'X'.
LAYOUT_IN-CONFIRMATION_PROMPT = 'X'.
LAYOUT_IN-DETAIL_POPUP = 'X' .
SORTCAT-decimals = '0'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = G_REPID
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_SAVE = G_SAVE
IS_VARIANT = GS_VARIANT
IT_FIELDCAT = FIELDCAT
IT_SORT = SORTCAT
IS_LAYOUT = LAYOUT_IN
IT_EVENTS = EVENTCAT
I_BACKGROUND_ID = g_back_ground
TABLES
T_OUTTAB = IT_OUT.
*& Form TOP_OF_PAGE_LIST_HEADER
text
-->LIST_HEADERtext
FORM TOP_OF_PAGE_LIST_HEADER USING LIST_HEADER TYPE SLIS_T_LISTHEADER.
DATA : HLINE TYPE SLIS_LISTHEADER,
TEXT(60) TYPE C.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE 'ROOTS INDUSTRIES LTD' TO TEXT.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
SELECT SINGLE * FROM T001W WHERE WERKS = WERKS.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE 'PLANT :' TO TEXT.
WRITE WERKS TO TEXT+8.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE T001W-NAME1 TO TEXT.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE T001W-STRAS TO TEXT.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE T001W-ORT01 TO TEXT.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE 'DATE :' TO TEXT.
WRITE BUDAT-LOW TO TEXT+7.
IF BUDAT-HIGH NE ''.
WRITE 'TO' TO TEXT+18.
WRITE BUDAT-HIGH TO TEXT+22.
ENDIF.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
ENDFORM. "TOP_OF_PAGE_LIST_HEADER
*& Form ALV_EVENT_INIT
text
FORM ALV_EVENT_INIT .
CLEAR ALV_EVENT.
ALV_EVENT-NAME = SLIS_EV_TOP_OF_PAGE.
ALV_EVENT-FORM = 'ALV_TOP_OF_PAGE'.
APPEND ALV_EVENT TO EVENTCAT.
CLEAR ALV_EVENT.
ALV_EVENT-NAME = SLIS_EV_TOP_OF_LIST.
ALV_EVENT-FORM = 'ALV_TOP_OF_LIST'.
APPEND ALV_EVENT TO EVENTCAT.
CLEAR ALV_EVENT.
ALV_EVENT-NAME = SLIS_EV_END_OF_LIST.
ALV_EVENT-FORM = 'ALV_END_OF_LIST'.
APPEND ALV_EVENT TO GT_EVENTS.
CLEAR ALV_EVENT.
ALV_EVENT-NAME = SLIS_EV_END_OF_PAGE.
ALV_EVENT-FORM = 'ALV_END_OF_PAGE'.
APPEND ALV_EVENT TO GT_EVENTS.
ENDFORM. "ALV_EVENT_INIT
*& Form ALV_TOP_OF_PAGE
text
FORM ALV_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = LIST_HEADER
I_LOGO = 'ENJOYSAP_LOGO'.
ENDFORM. "ALV_TOP_OF_PAGE
*& Form BUILD_EVENT
text
-->P_GT_EVENTS[] text
FORM BUILD_EVENT USING P_EVENTS TYPE SLIS_T_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = P_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_USER_COMMAND INTO
ALV_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_USER_COMMAND TO ALV_EVENT-FORM.
APPEND ALV_EVENT TO P_EVENTS.
ENDIF.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_BEFORE_LINE_OUTPUT INTO
ALV_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_BEFORE_OUTPUT TO ALV_EVENT-FORM.
APPEND ALV_EVENT TO P_EVENTS.
ENDIF.
ENDFORM. " BUILD_EVENT
kindly reward if found helpful.
cheers,
Hema.

Back ground submission in bw,urgent

hi,
i want to submit bw std report in back ground.
how can i submit,is there any t.code like r/3.
plz giv the steps,i m very new to bw.
thanks
murty

In Process Chain (Transaction code RSPC) you have something called Reporting Agent(for versions 3.x)
Goto RSPC-->Click on any chain and then click on a button called Process Types(left hand side of screen) -->Select Node Reporting Agent and there is something called Print the report in background...(I have not used it since I am working in BI 7)
To use Broadcaster you can broadcast any report from Portal to the required target location e.g Mailbox etc.The report can be HTML ,spreadsheet or PDF or many other formats .I don't know whether you guys are using it!!!Its really cool new feature ,try this out if available ..I can give you more detail if you need.
Regards,
rocks

Back ground Job Creation and maintanance ?

Gurus
I have a report, which will take more than the normal 10 min time.
ISo i have to run it in the back ground session.
Please let me know how to create a back grund job and maintain and process it?
Also please tell me the Tcodes associated with this process.
Thanks a lot.. Points will be awarded....of course...
Meenakshi.N

On the report screen, press F9 (or program -> execute in background). Give the printer name and to send to spooler or print immediately option in the initial screen. Press OK.
Then, give the start time (options will appear) and click on "Save" button.
Now, to see the status of the job, go to SM37.and execute by your username. Here you can see the job status, spool etc.
Let me know if you have any questions.

Back Ground Job- Lay out settings

Hi Frnds,
We will be executing some big reports in the Back ground , now before executing the report i have to select the Lay out , is there any option for this .??
And when i execute the report in back ground i get the data Page wise , but when i execute the report in foreground , i get the report continuous in one page .
Is there any option of getting that report continuously in one page when i execute in back ground ??
Regards
Rakesh

Hi Rakesh
Output of background program are totally based on Printer settings you have selected.
Take help of your BASIS team to configure a new printer specially for background job, which can display full report in one page.
Basis team is only responsible for it.
try and revert

How to set Back ground job & get my desired output layout in sm36 & sm37 ?

Hai SAP ABAP/BASIS Gurus,
I am currently taking ME2N PO Pending value Report by setting variant in input screen & setting my own output layout ie only four field ie.Plant, Material,Currency,Still to be delivered value will be visible in output screen
I set Back ground in sm36 using my variant & i saw my output in sm37.. But I cant get output as my desired field..
This is my problem..
1) I Cant Get the Same output in shedule job [sm36 & sm37] like When i run in foreground for ME2n.
I am using ALV Scope of list..
2) If I use BEST Layout in Scope of list means i get the desired Output field layout as same as my foreground output field..
I want to get the output layout as desired & also in ALV format[ Useful for excel work]
Kindly guide me.
Thanks in advance..
swetha
Edited by: Swetha SAP Girl on Jul 2, 2009 5:06 PM

Hi Swetha,
To get the missed fields in the spool, while creating the background job(execute in background option) you can see the printer setting block at the end of the background job settings window, in that check the 'Spool Request Max. Width 255 char' check box and then continue. It will generate the spool list with maximum width and you can see all the fields in the spool output.
Thanks,
Muthu
Edited by: Muthu Prabakaran Selvam on Jul 3, 2009 2:35 PM

SMARTFORMS - White letters on black back ground

Hello Experts
I am creating a smartform that has white text and black back ground. In print preview it looks perfect but when I send the form to the printer the white letters do not appear, it is all black. I did a print screen when it was in print preview mode and it printed fine on the printer, white letters on black back ground. What am I missing to get it to print via smartforms, something in the CALL FUNCTION?
      CALL FUNCTION fm_name
        EXPORTING
          control_parameters = gs_control_param
          output_options     = ls_output
          is_packlist_data   = i_packlist
          zle_ps_header      = ls_header
          user_settings      = space
        TABLES<br />
          text_lines         = lt_text_lines.

Hai Gary,
Welcome to SDN.
Nothing is wrong with you print program.
Just need to change your Printer . As the normal printer can print only black letters.
You need to get a colour printer to get the desired result.
Hope this solves your issue.
Cheers,
Suvendu

MI 21 printing in back ground

Similar Messages

Maybe you are looking for