MI - Configuration Parameter Sets

When trying to access the "Configuration Parameter Sets" option under the Mobile Administrator page I am getting an error:
Connection is already closed and no longer associated with a managed connection
When I try to create a new parameter set I get a java.lang.NullPointerException exception. Please help.
Thanks,
Mahwish

Hi,
   If you click on any link under the mobile Administrator you will get similar error like "Connection is already closed and no longer associated with a managed connection"
     For this above issue please check the following points.
1. Visual Admin>Services>Connection Container.. here Check the number of connections values??
2. Check all the authorization are assigned to access the RFCs to user which is mentioned in SAPJRAFactory_EN.
   If we resolve the above problem you would not get any null pointerException during creation of the parameter sets.
Regards,
Anil Kumar.

Similar Messages

CSCth95017 - Configurable parameter on how callingparty is displayed for hunt groups.

Hello all,
The "fixed-in" versions for this bug are listed below;
Fixed in: (5)
9.0(0.98000.74),9.0(0.98000.21),8.6(4.98000.21)
8.6(2.21023.1),1.9(9.98000.16)
But the bug is related to firmware and the "fixed-in" versions look like CUCM versions;
Symptom:
As of phone load 9.x and higher, calls to a hunt pilot show the following format for the calling party on the ringing phone.
From 'Calling Party Name' for 'hunt pilot DN'
i.e. From John Doe for XXXX
The previous format was
From 'Calling Party Name' ('Calling Party Number')
i.e. From John Doe (XXX-XXX-XXXX)
Need a configurable parameter to change the format to the previous format if the customer desires.
Conditions:
Occurs on phone loads 9.0(x) and above.
Workaround:
Downgrade to 8.4.x
Can anyone clarify the "fixed-in" versions for this bug and where the versions are available for download.
Cheers!
Rob
"Always movin' ahead and never lookin' back" - Springsteen

Hi Rob, The original documentation highlighted this as a phone issue. You have a good eye to catch this. The ultimate resolution was committed on the server side. I updated the bug Release-note to include more information about the fix. You will see that in Bug Toolking and Bug Search Tool in 24-48 hours. Looks like it was necessary to change the information CUCM was sending out in order for the phones to leverage that information. Here is what I added to the bug: New Service Parameter : "Display Hunt Pilot Name or DN for Hunt Group Calls When Alerting" Default Value : True ? Default behavior will be new behavior from 8.x . For customers who want the previous behavior of 7.x will have to set this parameter to false after upgrade. Call Processing Fix from SCCP and SIP Side : - For Hunt Pilot calls, CUCM will not send Hunt Pilot URI to in outgoing INVITE when this service parameter is false but internally CUCM still treats this call as Hunt pilot call so that we do not break other features. - For Hunt Pilot calls, CUCM will send the HP URI to phone when this SP is true. For the versions above: 9.0(0.98000.74) - this is an internal nightly build (.98xxx.). this *may* get it included in 9.0(1) 9.0(0.98000.21) - this is an internal nightly build (.98xxx.). this *may* get it included in 9.0(1) 8.6(4.98000.21) - this is an internal nightly build (.98xxx.). this *may* get it included in 8.6(5) 8.6(2.21023.1) - this gets it fixed in 8.6(2) engineering special branch commonly referred to as es23. TAC can provide this to you. This *may* get it included in the next 8.6.2su that gets posted to Cisco.com. 1.9(9.98000.16) - this appears to be a typo. Regards, Wes

Configurable parameter of ccBPM for time out

Hi,
We are using ccBPM for collection files based on some correlation and we have set-up a deadline branch for a particular time interval to collect files.
We want to set the time out parameter as aconfigurable parameter so that everytime we dont need to touch ccBPM and can make changes in ID.
i have tried using this but in deadline branch I can only define numeric value..
Could you please tell me if we have any other way to implement this or we cannot use configurable parameter for deadline branch time duration?
Thanks in Advance
Best Regards,
Harleen Kaur Chadha

Hi Harleen Kaur Chadha,
I understand your requirement is to collect messages for particular time period (like standard pattern BpmPatternCollectTime). And, if this time period changes, you want implement the changes without editing ccBPM.
As far as I know, it is not possible. I do not recommend you to think about it, because, the time duration for which messages should be collected will not change every day in actual business scenario. I guess once you define time period based on business and technical details, it will be constant. Letu2019s say if it changes once in a blue moon, then edit the ccBPM. If you want more control on size of message getting collected you can combine these patterns [Link|http://help.sap.com/saphelp_nwpi711/helpdata/en/08/16163ff8519a06e10000000a114084/frameset.htm ]
Regards,
Raghu_Vamsee
Edited by: Raghu Vamsee on Jan 13, 2011 4:20 PM

WDA application configuration parameter Stylesheet URI not working

Hi Experts,
I created an application configuration for a webdynpro ABAP application and populated theme path for parameter Stylesheet URI on application configuration. However when I execute the application using this application configuration, the application does not pick up the theme.
If I pass the same path using URL parameter SAP-EP-THEMEROOT, it works. Also it works if I maintain it as URL parameter in SPRO
However for my requirement I need it to work specifically from application / application configuration parameter. Has anyone faced this problem and found a solution?
Thanks in Advance
Tanmay

I believe you need a redirect if you want to change between SSL and non-SSL.
How about something in the line of (example with code 404):
<If $code=404 && $security>
Error fn="redirect" url="http://oursite/error.html"
</If>.. where +$security+ means SSL.
About the Error and URI, it seems uri="/error.html" would work, but it will not switch you from SSL to non-SSL.
I'm curious why you would want to redirect a user to the non-SSL instance in this scenario..

Safari was very slow in opening up Google sites. I found a discussion thread that suggested changing the "Configure IPv6" setting to "Off" in the System Preferences, Network, Advanced, TCP/IP section. That seems to work well. Are there any risks?

Safari was very slow in opening up Google sites. I found a discussion thread that suggested changing the "Configure IPv6" setting to "Off" in the System Preferences, Network, Advanced, TCP/IP section. That seems to work well. Are there any risks to leaving the Configure IPv6 setting to Off?

Nope. You can always reverse that if you choose.

"Configure Color Setting" was disabled and grey

Dear All:
any ideas why my SAP GUI was not able to change colour?
the button of "Configure color Setting" was disabled and grey.
SAP Logon 720
Window 8.1
Window acct with administration right.
I had re-install the SAP GUI will select all plugin and add on, but the button still in grey and disabled.
Thank you.

Also note that SAPGUI for Windows 7.20 is not supported.
For Windows 8.1 you must use 7.30 patch 7 or higher.
See note
http://service.sap.com/sap/support/notes/66971
Regards,
Jude

Hiii..the lan setting does niot configure in my mac os x 10.8.2...plz give me the clue that i configure my setting easily.

the lan setting does niot configure in my mac os x 10.8.2...plz give me the clue that i configure my setting easily.

How to set up Outlook.com with IMAP
Outlook.com or Hotmail.com IMAP setup
Getting Hotmail IMAP to Work on a Mac

XI configuration parameter

Hi All,
I need to change XI configuration parameter LOCK_MESSAGE of category runtime to 0.
But i am not able to locate this parameter,can you please suggest how to change this parameter.
thanks and regads
Amit

Hi,
Are you not finding it here?
Log in to SAP PI -> Go to transaction SXMB_ADMIN -> Category (Runtime)-> click Configuration
Regards
Suraj
Edited by: S.R.Suraj on Sep 15, 2009 7:05 AM

Configuration parameter which are stored in automationBuild.xml file

Do you know the correct path for below configuration parameter which are stored in automationBuild.xml file which is kept in src folder of osm project?
<property name="studio.weblogic.home" value=""/>
<property name="studio.java.sdk.home" value=""/>
<property name="studio.osm.sdk.home" value=""/>

Hi Sachin,
Here is the info,
studio.weblogic.home=<Weblogic_Installated Dir>/wlserver_10.3
studio.java.sdk.home= <JDK Installed Dir> +(C:\jdk1.6.0_11, Something like this)+
studio.osm.sdk.home=<OSM Installed Dir>/SDK
Thanks,
Naveen Jabade

Cannot configure parameter FORMULA_FILE_NO in task /CPMB/IOBJ_SOURCE_MD_CON

Hi
When I am trying load data from Bi infoobject to BPC dimension following error I am getting.
"Cannot configure parameter FORMULA_FILE_NO in task /CPMB/IOBJ_SOURCE_MD_CONVERT"
Can any body give me suggestion to resolve this issue
Mahi

Hi
Here I have taken small exmaple
I have taken city and country . country is attribute of city. I my transformation file id=id, city=0city, country=0country. No conversion file. I have validated transformation file successfully. I hve created data manager package. here I hve selected process chain i.e iobj_masterdata_load . I have not changed dynamic script. when running the package I am geting the above error
thanks in advance
mahi

How to configure DSL set up?

I'm using my old first generation iBook clamshell temporarily and I need to figure out how to configure it/set it up for DSL. It was configured for the ethernet system at my old university back in 2001 but I have no idea how my friend did it back then. Thanks so much!

Do you use a router between the DSL connection and computer, or does it connect directly?

Variant Configurator : Value set by user or dependency ?

Hi,
How can i determine whether a value in a characteristic in the variant configurator is set by a user or by a dependency ?
with regards
Erik

Hi,
When a variant is created , inthat particular screen, theres an option
Whether it is cretd by user or system.
And table name is RSVAR
field is TRANSPORT
Thanks,
Shreya

I am have trouble sending email it's saying configured in setting, Why?

I am trying to send a email from notepad and it not working. It said that configured in setting, Why what do I need to do?

Mate, just found this in another thread and it worked!!!!!
See how you go!
Hello,
I managed to fix it this way:
Settings > Mail, etc - remove your iCloud account
Settings > iCloud - check iCloud account is removed
Settings > iCloud - add your account using the e-mail address you want to use (I wanted @me but was getting the .mac error because I set up my account in 2007 with a @mac address, so I added with @me address)
let it do its thing
Settings > iCloud > Account - my Apple ID shows as @mac but when I scroll down my 'Mail' shows as @me and I am able to send e-mails again!
I hope this helps you guys out. I think it would be great if Apple would allow people to merge their @me.com and @mac.com addresses into one of their choice to avoid confusion both for us and their servers! I also had iMessage trouble because of this.

Do you have the recommend Parameter Sets Controlling IPC Resources on Solaris 8 (64-bits)

Do you have the recommend value of "Parameter Sets Controlling IPC Resources"
for Tuxedo8(32-bits) on Sun Solaris8.0 (64-bits) ?

Hi Asgorath,
Unfortunately I do not have an answer for you but I
am experiencing the identical problem on a HP
Proliant BL25p Blade Server. Here is my hardware
config:
CPU - Dual Opteron 2.6 Single Core
Memory - 16gb
Controller - HP Smart Array 6i
Logical drives - 1 (2x72gb RAID1+0)
I have tried the same things as you and I still get
intermittant boots. Power on and off does not always
work as the system still hangs. It's totally hit or
miss. Once it soes boot it seems to work fine. I have
also installed the latest Solaris 10 for x86 Patch
Cluster in hopes that some of the kernal patches
would fix the problem. So far no luck as the system
continues to hang...HARD!! HP was out to my site
today and the Eng. is going back to the group that
qualified Solaris10 on the HP Blades and see if they
have any input. If I receive anything back I will
post it here. I know this post is late and if you
have resolved please post your fix.Hi doc42755,
I have not come up with a solution as of yet, if I do come up with a solution i will most certainly post it here.
However, if you find the solution could you let us know in this thread aswell.
Thanks
Asgaroth

I've got 2 phones an iphone 3gs and i updated it to an ios 6 also an android phone since updating my iphone 3gs to ios 6 it wont let me add vpn configuration or set up internet tethering/ personal hotspot or portable wi-fi

I've got 2 phones an iphone 3gs i updated it to an ios 6 also an android phone since updating my iphone 3gs to ios 6 it wont let me connect or add vpn configuration or set up internet tethering/ portable hotspot or portable wi-fi but i have no problems connecting or adding my android phone to tethering or portable hotspot

http://support.apple.com/kb/HT4517
http://support.apple.com/kb/TS2756
if those two links don't help then contact your phone carrier.

MI - Configuration Parameter Sets

Similar Messages

Maybe you are looking for