Mi-Fi and a router

I have a Cannon printer on a router. They say it's the only way to make it wireless. I have 4G MI-FI4510L. To print off internet, I have to click print, which puts it in printer queue,Then disconnect Mi-Fi and turn Router on. Any way that both can be recognized and print straight from internet while still on internet?

The pepwave is definitly an interesting peice of equiptment which appears to address all of the roadblocks in this situation. I've never tinkered with a device like that but it sounds like it would be helpful. The diagram that TechIsMyLife provided does seem feasible. Thanks for sharing that link!
Keep in mind that even though the PepWave would allow you to connect the MiFi to the Router, you still have to cascade them togeather in order to make them share the same network. A quick Google search should reveal the steps necessary to complete the cascading process.
I think a better setup would be to eliminate the 2nd router if at all possible. That way you can have the printer connect wirelessly to the MiFi and cut out an extra piece of equiptment to manage. From the information you have provided so far, it sounds like you only need the extra router to enable your printer anyways. If you find that you really want that extra router to be involved, then TechIsMyLife's solution is the only way to do it.

Similar Messages

Using Remote app on iPhone 5 without a separate internet connection and wifi router.

Hi,
I need to be able to control iTunes within my MacBook Pro remotely. Using my mobile broadband service and wireless router I've been able to get the Remote app to allow my iPhone 5 to do the job nicely through Home Share. So I went and bought a separate WiFi router and tried to do the same thing. Of course when it didn't work, I discovered that I need an internet connection and WiFi network to make the Home Sharing work.
So I got to thinking, can I create a WiFi hotspot using the Personal HotSpot functionality of my iPhone, set up Home Sharing on phone and MacBookPro and then use the Remote app. Ideally this would work as it seems all the key components are in place.
The MacBook Pro accepts the iPhone hotspot as a means of Home Sharing, however the iPhone won't use the personal hotspot to Home Share and I can't connect to the iPhone personal hotspot on the iPhone itself.
Does anyone know how to make this work for me? It would be such as neat solution if I can get it to work - not to mention the potential to save me about $200 (I need to set this model up for two people).
Cheers
Kathy

Same trouble here, iPad 2 with latest OS and remote app, iPod with latest OS and app.

VPN between ASA5505 Easy VPN Server and 881G Router as Easy VPN Client

Hello,
I have problem in VPN between ASA5505 Easy VPN Server and 881G Router as Easy VPN Client. ASA 5505 have 7.2.3 software and 881G router have 15.1 software.
881G is configured as hardware client in network exstention mode, and it is placed behind NAT. ASA5505 is working as server. Same VPN Group works correctly from VPN software clients.
When I send traffic from 881G client side, in show cryto sessin detail I see encrypted packets. But with same command I dont see decrypted packet on ASA5505 side. On both devices Phase 1 and Phase 2 are UP.
VPN is working when I replace ASA5505 with ASA5510 correctly with have 8.4.6 software. But problem is that i need to do this VPN between ASA5505 and 881G.
Can you help me, how can I debug or troubleshoot this problem ?
I am unable to update software on ASA5505 side.

Hello,
Hire is what my config look like:
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 set pfs
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 40 set pfs
crypto dynamic-map outside_dyn_map 40 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 60 set pfs
crypto dynamic-map outside_dyn_map 60 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 80 set pfs
crypto dynamic-map outside_dyn_map 80 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 100 set pfs
crypto dynamic-map outside_dyn_map 100 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 120 set pfs
crypto dynamic-map outside_dyn_map 120 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 140 set pfs
crypto dynamic-map outside_dyn_map 140 set transform-set ESP-AES-128-SHA
crypto dynamic-map outside_dyn_map 160 set pfs
crypto dynamic-map outside_dyn_map 160 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 180 set pfs
crypto dynamic-map outside_dyn_map 180 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 200 set pfs
crypto dynamic-map outside_dyn_map 200 set transform-set ESP-AES-256-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 1
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 2
authentication pre-share
encryption 3des
hash sha
group 1
lifetime 86400
crypto isakmp policy 3
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
tunnel-group HW-CLIENT-GROUPR type ipsec-ra
tunnel-group HW-CLIENT-GROUP general-attributes
address-pool HW-CLIENT-GROUP-POOL
default-group-policy HW-CLIENT-GROUP
tunnel-group HW-CLIENT-GROUP ipsec-attributes
pre-shared-key *******
group-policy HW-CLIENT-GROUP internal
group-policy HW-CLIENT-GROUP attributes
password-storage enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value cisco_splitTunnelAcl
nem enable

Site-to-Site VPN between Cisco ASA 5505 (8.4) and Cisco Router (IOS 15.2)

Hi, I'm trying to create Site-to-Site VPN between Cisco ASA 5505 and Cisco Router 3945.
I've tried create configuration with and without ASA wizard, but anyway it doesn't work.
Please help me to find where is the issue.
I have two sites and would like to get access from 192.168.83.0 to 192.168.17.0
192.168.17.0 --- S1.S1.S1.S1 (IOS Router) ==================== S2.S2.S2.S2 (ASA 5505) --- 192.168.83.0
Here is my current configuration.
Thanks for your help.
IOS Configuration
version 15.2
crypto isakmp policy 1
encr aes 256
authentication pre-share
group 2
crypto isakmp key cisco address 198.0.183.225
crypto isakmp invalid-spi-recovery
crypto ipsec transform-set AES-SET esp-aes esp-sha-hmac
mode transport
crypto map static-map 1 ipsec-isakmp
set peer S2.S2.S2.S2
set transform-set AES-SET
set pfs group2
match address 100
interface GigabitEthernet0/0
ip address S1.S1.S1.S1 255.255.255.240
ip nat outside
ip virtual-reassembly in
duplex auto
speed auto
crypto map static-map
interface GigabitEthernet0/1
ip address 192.168.17.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
access-list 100 permit ip 192.168.17.0 0.0.0.255 192.168.83.0 0.0.0.255
ASA Configuration
ASA Version 8.4(3)
interface Ethernet0/0
switchport access vlan 2
interface Vlan1
nameif inside
security-level 100
ip address 192.168.83.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address S2.S2.S2.S2 255.255.255.248
ftp mode passive
same-security-traffic permit intra-interface
object network inside-network
subnet 192.168.83.0 255.255.255.0
object network datacenter
host S1.S1.S1.S1
object network datacenter-network
subnet 192.168.17.0 255.255.255.0
object network NETWORK_OBJ_192.168.83.0_24
subnet 192.168.83.0 255.255.255.0
access-list outside_access_in extended permit icmp any any echo-reply
access-list outside_access_in extended deny ip any any log
access-list outside_cryptomap extended permit ip 192.168.83.0 255.255.255.0 object datacenter-network
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool vpn_pool 192.168.83.200-192.168.83.254 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (inside,outside) source dynamic inside-network interface
nat (inside,outside) source static inside-network inside-network destination static inside-network inside-network no-proxy-arp route-lookup
nat (inside,outside) source static inside-network inside-network destination static datacenter-network datacenter-network no-proxy-arp route-lookup
nat (inside,outside) source static NETWORK_OBJ_192.168.83.0_24 NETWORK_OBJ_192.168.83.0_24 destination static datacenter-network pdatacenter-network no-proxy-arp route-lookup
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 DEFAULT_GATEWAY 1
crypto ipsec ikev1 transform-set vpn-transform-set esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set vpn-transform-set mode transport
crypto ipsec ikev1 transform-set L2L_SET esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set L2L_SET mode transport
crypto dynamic-map dyno 10 set ikev1 transform-set vpn-transform-set
crypto map vpn 1 match address outside_cryptomap
crypto map vpn 1 set pfs
crypto map vpn 1 set peer S1.S1.S1.S1
crypto map vpn 1 set ikev1 transform-set L2L_SET
crypto map vpn 20 ipsec-isakmp dynamic dyno
crypto map vpn interface outside
crypto isakmp nat-traversal 3600
crypto ikev1 enable outside
crypto ikev1 policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 20
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
group-policy GroupPolicy_S1.S1.S1.S1 internal
group-policy GroupPolicy_S1.S1.S1.S1 attributes
vpn-tunnel-protocol ikev1
group-policy remote_vpn_policy internal
group-policy remote_vpn_policy attributes
vpn-tunnel-protocol ikev1 l2tp-ipsec
username artem password 8xs7XK3To4s5WfTvtKAutA== nt-encrypted
username admin password rqiFSVJFung3fvFZ encrypted privilege 15
tunnel-group DefaultRAGroup general-attributes
address-pool vpn_pool
default-group-policy remote_vpn_policy
tunnel-group DefaultRAGroup ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group DefaultRAGroup ppp-attributes
authentication ms-chap-v2
tunnel-group S1.S1.S1.S1 type ipsec-l2l
tunnel-group S1.S1.S1.S1 general-attributes
default-group-policy GroupPolicy_S1.S1.S1.S1
tunnel-group S1.S1.S1.S1 ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:f55f10c19a0848edd2466d08744556eb
: end

Thanks for helping me again. I really appreciate.
I don't hve any NAT-exemptions in Cisco IOS Router. Transform-set I will change soon, but I've tried with tunnel mode and it didn't work.
Maybe NAT-exemptions is the issue. Can you advice me which exemptions should be in Cisco IOS Router?
Because on Cisco ASA I guess I have everything.
Here is show crypto session detail
router(config)#do show crypto session detail
Crypto session current status
Code: C - IKE Configuration mode, D - Dead Peer Detection
K - Keepalives, N - NAT-traversal, T - cTCP encapsulation
X - IKE Extended Authentication, F - IKE Fragmentation
Interface: GigabitEthernet0/0
Session status: DOWN
Peer: 198.0.183.225 port 500 fvrf: (none) ivrf: (none)
      Desc: (none)
      Phase1_id: (none)
IPSEC FLOW: permit ip 192.168.17.0/255.255.255.0 192.168.83.0/255.255.255.0
        Active SAs: 0, origin: crypto map
        Inbound: #pkts dec'ed 0 drop 0 life (KB/Sec) 0/0
        Outbound: #pkts enc'ed 0 drop 0 life (KB/Sec) 0/0
Should I see something in crypto isakmp sa?
pp-border#sh crypto isakmp sa
IPv4 Crypto ISAKMP SA
dst             src             state          conn-id status
IPv6 Crypto ISAKMP SA
Thanks again for your help.

My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:(((( it happen every time if I restart the modem and/or router

My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:(((( it happen every time if I restart the modem and/or router.. Any idea how to fix this?

Hello Rattisate,
Sorry to hear you are not able to connect to Wi-Fi on your MacBook Pro. I would be concerned about this too. You can find information on how to troubleshoot this in the following article:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Follow the steps in the section labeled, "Symptom: My Mac does not connect to the Internet."
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

How to setup apple time capsule with FIOSinternet and VZ router?)

Hello,
I have Apple time capsule and the VZ Router MI424WR. I current set up:
1. VZ router - wireless off, the rest is standard
2. Time capsule: Wireless on in Bridge mode
Result: Internet works but the wireless network is very in-stable. Airtunes is nearly not usable.
I searched in the Internet and there was several comments that is is not a good combination. Therefore it is recommended to convert the VZ router in a modem mode and use only the Time capsule as the router. I tried this several times I do not get it to work. I followed this procedure (http://data.agaric.com/node/2160) but then I need the PPPoE Account number and password. But there do I get this? The Verizon support was not really helpful.
Please, is there a good and complete description to solve that issue?
Thanks in advance
Moebius

Go back to your first setup ...
Verizon router with wireless turned off
Apple Time Casule with wireless turned on
Method 1:
With the Time Capsule in "Bridge Mode", if I remember correctly, you should connect the WAN port to one of the open ports on the Verizon router (I believe bridge mode also turns off the DHCP server on the Time Capsule, if not, find that and turn if off as well).   Change the addressing mode for the Time Capsule to "static" and assign it an address on the LAN which is not in use (choose something you know is out of the way but on the LAN -- I suggest 192.168.1.180 to start -- you can change it once you get everything working).
If it doesn't work this way for you, move the cable from the WAN port on the Time Capsule to Port 1 and try again.
Method 2:
This results in a router behind a router setup, but unless you have devices connected directly to the Verizon router, it shouldn't be a problem.
With the Time Capsule disconnected from the Verizon router, turn on "Connection Sharing" (not bridge mode) and make sure DHCP is enabled on the Time Capsule. You need to change the address range being used by the Time Capsule (which I think defaults to 192.168.1.x to another network -- I suggest, 192.168.2.x with a netmask of 255.255.255.0 and give the router an address of 192.168.2.1 on the LAN side. Now, connection the WAN port to one of the Verizon router LAN ports. If you had anything connected to the Verizon LAN ports, move those over to the LAN ports on the Time Capsule and reboot them.
Method 3:
This is the least desirable of the scenarios because it relies on Verizon's crappy radio in their router (the Time Capsule has a much better radio and support 802.11n as well as b and g) whereas Verizon's only support b/g.    Go back to the configuration for Method 1, but also turn OFF wireless on the Time Capsule and turn on wireless on the Verizon router.   Try both bridge scenarios described -- using the WAN port first and if that didn't work, then moving the connection to port 1.
There is no scenario where you can place the Verizon router behind the Time Capsule -- since I believe Verizon is using all MoCA connections for the WAN side of their connection (you'd have to get Verizon to convert you to ethernet WAN and then they would not support you most likely for any STB issues with your FiOS if the Time Capsule was between the ONT and their router ... so don't even bother wasting time there ... more headaches than it would be worth.
If you're still not sure exactly what each configuration screen on the time capsule should say, post some screen snaps (or the configuration settings/choices which you are unsure about and someone will likely know the answer here).

I want to set up my Epson printer using an airport and RR router. It was previously set up using a different router through HTC but same printer. How do I do this?

I want to set up my Epson printer using an Airport and RR router. The same Mac Book and printer was formerly set up using a HTC router. How do I reset computer so it communicates with printer?

http://support.apple.com/kb/HT3771
Mac 101: Printing (Mac OS X v10.6)

TS1702 Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a

Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a blur.

Do you have a question? This is a user to user help forum. Apple is not here only other users like yourself. You don't report problems to Apple here.
By the way, it might help if you indicated where you are located.
To complain to Apple use http://www.apple.com/feedback/ipad.html

When my 4S connects to my home wifi, it kicks all other devices off and the router has to be restarted. Can anyone help?

I am using an iPhone 4S with 16gb memory. I did not yet update to iOS 8. I'm using 7.1.2. I have never had any problems previously using 3G or wifi. We just moved and have a new Netgear router supplied by our new ISP. We have ADSL connection. The router seems to be working fine for all the devices in the house. At any time we may have 2 or 3 laptops connected, as well as Kindle Fires, iPod Touches, and my husband's iPhone (which is the same make, model, year as mine). My iPhone will connect, but usually within minutes after connecting my iPhone 4S (though sometimes 30 minutes or more later), it kicks everyone offline and the router needs to be restarted. The router shows appropriate green lights and I can see it on my list of available networks, but if I try to connect I get the "unable to connect to this network" message until we restart the router. No one else is able to reconnect until the restart, either.
I have tried resetting network settings on my iPhone. I have completely turned off my iPhone and the router. I have talked with someone at our ISP and they did a reset of the router with me. They think the router is bad. But it works completely fine for everyone else in the house, so I can't help but think we are having a connection issue between the router and my iPhone.
Any help you can offer would be greatly appreciated! Thank you!

Is her iPhone in a case by any chance? If so, remove the case and try again. How does her iPhone work in free Wi-Fi locations?
Try resetting the iPhone...
Press and hold the Home and On/Off buttons simultaneously until you see the Apple logo, then release. This may take up to 10 seconds. This is the equivalent of a re-boot and you will not lose any data.
If none of the above work take it to an Apple store or AASP for evaluation. She will not be charged folr this and they will suggest a solution if there is a fault.

Adding VLAN to Po-Group and OSPF routing what is the correct way?

Hi Community,
I recently had an issue that brought down the links between a couple of switches...luckily this was done after hours and I did not save the config so was able to revert back.
The basic scope of my project is:
We are running out of IP's on the 192.168.1.0/24 sunbnet so wanted to create a seperate VLAN/Subnet for physical workstations.
He is what I orginally did;
1) On our core switch; (Switch1)
     Create the VLAN,
     VLAN interface,
     DHCP pool,
     excluded address'
2) On second switch (Switch 2)
     Add VLAN name, no interface
3) I then updated the PO-group on Switch1 with new VLAN (this brought down the link before I was able to finish my config)
    Therefore I was not able to complete the following:
          add vlan to spanning-tree or updated OSPF routing
Here is what I assume to be the correct order?
1) On Core Switch (Switch 1)
     Create VLAN
     VLAN interface
     DHCP pool
     excluded address'
     add vlan to spanning-tree
     add vlan (passive interface) and sunbet to OSPF routing
2) On Switch 2
     Add vlan name/interfaces with no ip
3) Update PO groups after the above has been configured
     Add new VLAN to Po-Group on Switch 2
     Add new VLAN to Po-Group on Switch 1
4) Last steps
     Updated specific access ports with new VLAN and test
     upon completion of testing, update all other access ports connected ot workstations with new VLAN
Questions:
Did my links go down because I added new VLAN to Po-group BEFORE updating spanning-tree and OSPF routing?
Can anyone verify the order as outlined in the section "Here is what I assume to be the correct order"

So the order in which to apply TASKS is correct?
also just to clarify the following TASK based on your comments.
Step 4- Add new VLANs to OSPF as passive interface
On Switch 1 (core)
We have this line of code
router ospf 100
router-id 192.168.1.10
log-adjacency-changes
passive-interface Vlan10
passive-interface Vlan30
passive-interface Vlan50
passive-interface Vlan500
network 192.168.0.2 0.0.0.0 area 0
network 192.168.1.10 0.0.0.0 area 0
network 192.168.30.254 0.0.0.0 area 0
network 192.168.33.254 0.0.0.0 area 0
network 192.168.51.254 0.0.0.0 area 0
network 192.168.99.5 0.0.0.0 area 0
network 192.168.200.254 0.0.0.0 area 0
TASK: OSPF - Add new VLANs(40 & 41) to OSPF as Passive Interface
******* Begin Here *********
config t
router ospf 100
passive-interface vlan40
passive-interface vlan41
!WE SHOULD ADD THIS LINE OF CODE
network 192.168.40.254 0.0.0.0 area 0
network 192.168.41.254 0.0.0.0 area 0
******* End Here *********
RESULT:
router ospf 100
router-id 192.168.1.10
log-adjacency-changes
passive-interface Vlan10
passive-interface Vlan30
passive-interface Vlan40
passive-interface Vlan41
passive-interface Vlan50
passive-interface Vlan500
network 192.168.0.2 0.0.0.0 area 0
network 192.168.1.10 0.0.0.0 area 0
network 192.168.30.254 0.0.0.0 area 0
network 192.168.33.254 0.0.0.0 area 0
network 192.168.40.254 0.0.0.0 area 0
network 192.168.41.254 0.0.0.0 area 0
network 192.168.51.254 0.0.0.0 area 0
network 192.168.99.5 0.0.0.0 area 0
network 192.168.200.254 0.0.0.0 area 0
Better??
Again thanks...your feedback have been a tremendous help!

Outlook 2010 and 2013 are unable to connect but OWA (and mail routing) works fine

Hi-
Not sure why but this past Sunday (just after DST adjustment) outlook clients (using 2010 and 2013) were unable to connect to an Exchange 2013 server. OWA and mail routing (internal and external) is working fine. I've even tried on multiple machines
and all of them experience the same issue. On a new machine with a fresh version of outlook 2013 installed here is what happens:
Click on Outlook 2013
Click Next until the account setup is displayed.
Name and email is auto-populated
Established network connection is good
Searching for email address settings is good (once the self-signed exchange 2013 cert is accepted)
And then the logging onto the mail server fails. The first pop-up is:
The Connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action.
Clicking "OK" is followed up with a window with the Microsoft Exchange connection info.
It lists Microsoft Exchange server which is populated with: GUID@<domain suffix>
Mailbox which is populated with: =SMTP:<Valid Email address>
On the Exchange Server I have noticed that the Web Management Service (WMSVC) is stopped and will not start. Starting the service outputs:
EventID 7024
"The Web Management Service terminated with the following service-specific error: Unspecified error"
Not really helpful :)
Since this is only happening with Outlook on multiple clients I'm expecting something with Exchange or the ability for outlook to connect to exchange.
Thanks in advance!

Hi
I know this is an old post, but I'm having a very similar issue. I have CU6 installed and all other client connectivity apart from internal Outlook connectivity is working fine. I have distributed the new Self-Signed Certificate and the tested to verify
the clients trust it. I have tried on multiple machine with multiple accounts and none of them connect.
I'm at the stage of reinstalling, but I would rather troubleshoot the problem, just in case ever hit the same wall in the future. I have run Test-OutlookConnectivity with the following output;
RunspaceId : 71f8d740-c499-4bbe-8baf-9cbb12566fb8
Server : PW-SC-01.companyname.local
MonitorIdentity : Outlook.Protocol\OutlookRpcDeepTestProbe\NEW2013
RequestId : 75641e34-aa49-4fce-aad7-181b56dd7b29
ExecutionStartTime : 10/11/2014 13:50:03
ExecutionEndTime : 10/11/2014 13:50:03
Error : Error 0x6ba (The RPC server is unavailable) from ClientAsyncCallState.CheckCompletion:
RpcAsyncCompleteCall
EEInfo: ComputerName: n/a
EEInfo: ProcessID: 14544
EEInfo: Generation Time: 2014-11-10 13:50:03.737
EEInfo: Generating component: 2
EEInfo: Status: 0x000006BA
EEInfo: Detection location: 1710
EEInfo: Flags: 0
EEInfo: NumberOfParameters: 1
EEInfo: prm[0]: Long val: 0 (0x00000000)
EEInfo: ComputerName: n/a
EEInfo: ProcessID: 14544
EEInfo: Generation Time: 2014-11-10 13:50:03.737
EEInfo: Generating component: 13
EEInfo: Status: 0x000006BA
EEInfo: Detection location: 1352
EEInfo: Flags: 0
EEInfo: NumberOfParameters: 1
EEInfo: prm[0]: Long val: -1073606646 (0xC002100A)
EEInfo: ComputerName: n/a
EEInfo: ProcessID: 14544
EEInfo: Generation Time: 2014-11-10 13:50:03.737
EEInfo: Generating component: 14
EEInfo: Status: 0xC002100A
EEInfo: Detection location: 1380
EEInfo: Flags: 0
EEInfo: NumberOfParameters: 2
EEInfo: prm[0]: Long val: 12175 (0x00002F8F)
EEInfo: prm[1]: Unicode string: /rpc/rpcproxy.dll?PW-SC-01.companyname.local:6001
EEInfo: ComputerName: n/a
EEInfo: ProcessID: 14544
EEInfo: Generation Time: 2014-11-10 13:50:03.737
EEInfo: Generating component: 14
EEInfo: Status: 0x00010000
EEInfo: Detection location: 1385
EEInfo: Flags: 0
EEInfo: NumberOfParameters: 2
EEInfo: prm[0]: Long val: 8 (0x00000008)
EEInfo: prm[1]: Binary Buffer: [48-1263-10248-1262-126-9632122164676121-3988104-118-11373-61-94
-111-112-98-1217048136942-12272-122-91311550483449324830638543192311910198979999101115115461121199
91111091091154699111461171074830231349524949485349505348484990231349574949485349505348484990483449
324830638543192311910198979999101115115461121199911110910911546991114611710748-12613448136942-1227
2-122-913111503-126115048-1261102-126110-22103-15-109-16-121-119-3121-4-106119-119-9369122-5779121
719-98-24-67-32918-98-236-19-10715326827-76102-61100108-12718-438331-37109-102-57-9942-11389-10374
-77-5-4-107109-11847342222-63-48-7468-17-1067033-56111-33-54-16-105-62-76-1282011-1664-12158-4915-
88-53-9-29-2994-49-54-5211-1364-212121-12396-127-353-396185117-681229-434246070-109818119-4858-128
-106-1279248-49110-44-81-121494199-118-17-106-71106828294-93-110-110-106-415084-127126-45-12331421
-61-2757-24-128-28-25111-52113121-56-98-5821527282-47255245104-111-55-1099747-115-11172-287-12526-
79-12430-119421360-107-6430-5410282-52-51-128533354-116672757-77-75-111-72-118-10114-84484825-40-1
8-70-24-9111-61-5391-8034125-12632-16-19-128112030-8-427523101-93-127-5348-127-5648146385291511-14
4325-9648-127-110638529174-127-11848-127-121-12623119101989799991011151154611211999111109109115469
911146117107-1262211211945115994548494611211999111109109115461081119997108-12626651171161116810511
59911111810111446808767111109109115461081119997108-12626651171161116810511599111118101114468087671
11109109115469911146117107-12613808767111109109115461081119997108-12613808767111109109115469911146
11710748196385293741248106843615573148126385291911-14248048136942-12272-122-913115503-12611081-930
6613-74953718-12745-14-25-94107-80-5-45-2231536-1728-12897-8587577-1252765-892896-83-10267-7926-20
-9841-1079-12-29-4315671111357-684036-40-5129-91-24-461066-12306-65-9118-89115191071-30-20-1067161
-83-91-74105-931649-48-96126-13-71-118-8967567-40-64-104-113-31-51-102357125100-50113-103-113123-9
873-627067-25-908-10131118125122-71-115-37-1850-1055851-31410-77-7312-36848124-26104-10711043-2048
-48-12666611759121127-2960-1571-9-95-98-1036911610-74221-32-25114-108749933-7147562114-3635-101-81
-1058-73108-61-78-128-116-715155112714-37-18-84-8331-2716-1174257-76-5-1598-15-12875-98-7329632178
-10714-123-6312212-1028359-56-76-683-873987-2120-845954-7617-71-57999828110], size=926
Exception : Microsoft.Exchange.Rpc.ServerUnavailableException: Error 0x6ba (The RPC server is unavailable)
from ClientAsyncCallState.CheckCompletion: RpcAsyncCompleteCall
EEInfo: ComputerName: n/a
EEInfo: ProcessID: 14544
EEInfo: Generation Time: 2014-11-10 13:50:03.737
EEInfo: Generating component: 2
EEInfo: Status: 0x000006BA
EEInfo: Detection location: 1710
EEInfo: Flags: 0
EEInfo: NumberOfParameters: 1
EEInfo: prm[0]: Long val: 0 (0x00000000)
EEInfo: ComputerName: n/a
EEInfo: ProcessID: 14544
EEInfo: Generation Time: 2014-11-10 13:50:03.737
EEInfo: Generating component: 13
EEInfo: Status: 0x000006BA
EEInfo: Detection location: 1352
EEInfo: Flags: 0
EEInfo: NumberOfParameters: 1
EEInfo: prm[0]: Long val: -1073606646 (0xC002100A)
EEInfo: ComputerName: n/a
EEInfo: ProcessID: 14544
EEInfo: Generation Time: 2014-11-10 13:50:03.737
EEInfo: Generating component: 14
EEInfo: Status: 0xC002100A
EEInfo: Detection location: 1380
EEInfo: Flags: 0
EEInfo: NumberOfParameters: 2
EEInfo: prm[0]: Long val: 12175 (0x00002F8F)
EEInfo: prm[1]: Unicode string: /rpc/rpcproxy.dll?PW-SC-01.companyname.local:6001
EEInfo: ComputerName: n/a
EEInfo: ProcessID: 14544
EEInfo: Generation Time: 2014-11-10 13:50:03.737
EEInfo: Generating component: 14
EEInfo: Status: 0x00010000
EEInfo: Detection location: 1385
EEInfo: Flags: 0
EEInfo: NumberOfParameters: 2
EEInfo: prm[0]: Long val: 8 (0x00000008)
EEInfo: prm[1]: Binary Buffer: [48-1263-10248-1262-126-9632122164676121-3988104-118-11373-61-94
-111-112-98-1217048136942-12272-122-91311550483449324830638543192311910198979999101115115461121199
91111091091154699111461171074830231349524949485349505348484990231349574949485349505348484990483449
324830638543192311910198979999101115115461121199911110910911546991114611710748-12613448136942-1227
2-122-913111503-126115048-1261102-126110-22103-15-109-16-121-119-3121-4-106119-119-9369122-5779121
719-98-24-67-32918-98-236-19-10715326827-76102-61100108-12718-438331-37109-102-57-9942-11389-10374
-77-5-4-107109-11847342222-63-48-7468-17-1067033-56111-33-54-16-105-62-76-1282011-1664-12158-4915-
88-53-9-29-2994-49-54-5211-1364-212121-12396-127-353-396185117-681229-434246070-109818119-4858-128
-106-1279248-49110-44-81-121494199-118-17-106-71106828294-93-110-110-106-415084-127126-45-12331421
-61-2757-24-128-28-25111-52113121-56-98-5821527282-47255245104-111-55-1099747-115-11172-287-12526-
79-12430-119421360-107-6430-5410282-52-51-128533354-116672757-77-75-111-72-118-10114-84484825-40-1
8-70-24-9111-61-5391-8034125-12632-16-19-128112030-8-427523101-93-127-5348-127-5648146385291511-14
4325-9648-127-110638529174-127-11848-127-121-12623119101989799991011151154611211999111109109115469
911146117107-1262211211945115994548494611211999111109109115461081119997108-12626651171161116810511
59911111810111446808767111109109115461081119997108-12626651171161116810511599111118101114468087671
11109109115469911146117107-12613808767111109109115461081119997108-12613808767111109109115469911146
11710748196385293741248106843615573148126385291911-14248048136942-12272-122-913115503-12611081-930
6613-74953718-12745-14-25-94107-80-5-45-2231536-1728-12897-8587577-1252765-892896-83-10267-7926-20
-9841-1079-12-29-4315671111357-684036-40-5129-91-24-461066-12306-65-9118-89115191071-30-20-1067161
-83-91-74105-931649-48-96126-13-71-118-8967567-40-64-104-113-31-51-102357125100-50113-103-113123-9
873-627067-25-908-10131118125122-71-115-37-1850-1055851-31410-77-7312-36848124-26104-10711043-2048
-48-12666611759121127-2960-1571-9-95-98-1036911610-74221-32-25114-108749933-7147562114-3635-101-81
-1058-73108-61-78-128-116-715155112714-37-18-84-8331-2716-1174257-76-5-1598-15-12875-98-7329632178
-10714-123-6312212-1028359-56-76-683-873987-2120-845954-7617-71-57999828110], size=926
at Microsoft.Exchange.Rpc.ClientAsyncCallState.CheckCompletion()
at Microsoft.Exchange.Rpc.ExchangeClient.ClientAsyncCallState_Connect.End(IntPtr&
contextHandle, TimeSpan& pollsMax, Int32& retryCount, TimeSpan& retryDelay, String& dn
PoisonedCount : 0
ExecutionId : 63105129
SampleValue : 33.5194
ExecutionContext : Mailbox logon verification
EMSMDB.Connect()
Task produced output:
- TaskStarted = 10/11/2014 13:50:03
- TaskFinished = 10/11/2014 13:50:03
- Exception = Microsoft.Exchange.Rpc.ServerUnavailableException: Error 0x6ba (The RPC
server is unavailable) from ClientAsyncCallState.CheckCompletion: RpcAsyncCompleteCall
EEInfo: ComputerName: n/a
EEInfo: ProcessID: 14544
EEInfo: Generation Time: 2014-11-10 13:50:03.737
EEInfo: Generating component: 2
EEInfo: Status: 0x000006BA
EEInfo: Detection location: 1710
EEInfo: Flags: 0
EEInfo: NumberOfParameters: 1
EEInfo: prm[0]: Long val: 0 (0x00000000)
EEInfo: ComputerName: n/a
EEInfo: ProcessID: 14544
EEInfo: Generation Time: 2014-11-10 13:50:03.737
EEInfo: Generating component: 13
EEInfo: Status: 0x000006BA
EEInfo: Detection location: 1352
EEInfo: Flags: 0
EEInfo: NumberOfParameters: 1
EEInfo: prm[0]: Long val: -1073606646 (0xC002100A)
EEInfo: ComputerName: n/a
EEInfo: ProcessID: 14544
EEInfo: Generation Time: 2014-11-10 13:50:03.737
EEInfo: Generating component: 14
EEInfo: Status: 0xC002100A
EEInfo: Detection location: 1380
EEInfo: Flags: 0
EEInfo: NumberOfParameters: 2
EEInfo: prm[0]: Long val: 12175 (0x00002F8F)
EEInfo: prm[1]: Unicode string: /rpc/rpcproxy.dll?PW-SC-01.companyname.local:6001
EEInfo: ComputerName: n/a
EEInfo: ProcessID: 14544
EEInfo: Generation Time: 2014-11-10 13:50:03.737
EEInfo: Generating component: 14
EEInfo: Status: 0x00010000
EEInfo: Detection location: 1385
EEInfo: Flags: 0
EEInfo: NumberOfParameters: 2
EEInfo: prm[0]: Long val: 8 (0x00000008)
EEInfo: prm[1]: Binary Buffer: [48-1263-10248-1262-126-9632122164676121-3988104-118-11373-61-94
-111-112-98-1217048136942-12272-122-91311550483449324830638543192311910198979999101115115461121199
91111091091154699111461171074830231349524949485349505348484990231349574949485349505348484990483449
324830638543192311910198979999101115115461121199911110910911546991114611710748-12613448136942-1227
2-122-913111503-126115048-1261102-126110-22103-15-109-16-121-119-3121-4-106119-119-9369122-5779121
719-98-24-67-32918-98-236-19-10715326827-76102-61100108-12718-438331-37109-102-57-9942-11389-10374
-77-5-4-107109-11847342222-63-48-7468-17-1067033-56111-33-54-16-105-62-76-1282011-1664-12158-4915-
88-53-9-29-2994-49-54-5211-1364-212121-12396-127-353-396185117-681229-434246070-109818119-4858-128
-106-1279248-49110-44-81-121494199-118-17-106-71106828294-93-110-110-106-415084-127126-45-12331421
-61-2757-24-128-28-25111-52113121-56-98-5821527282-47255245104-111-55-1099747-115-11172-287-12526-
79-12430-119421360-107-6430-5410282-52-51-128533354-116672757-77-75-111-72-118-10114-84484825-40-1
8-70-24-9111-61-5391-8034125-12632-16-19-128112030-8-427523101-93-127-5348-127-5648146385291511-14
4325-9648-127-110638529174-127-11848-127-121-12623119101989799991011151154611211999111109109115469
911146117107-1262211211945115994548494611211999111109109115461081119997108-12626651171161116810511
59911111810111446808767111109109115461081119997108-12626651171161116810511599111118101114468087671
11109109115469911146117107-12613808767111109109115461081119997108-12613808767111109109115469911146
11710748196385293741248106843615573148126385291911-14248048136942-12272-122-913115503-12611081-930
6613-74953718-12745-14-25-94107-80-5-45-2231536-1728-12897-8587577-1252765-892896-83-10267-7926-20
-9841-1079-12-29-4315671111357-684036-40-5129-91-24-461066-12306-65-9118-89115191071-30-20-1067161
-83-91-74105-931649-48-96126-13-71-118-8967567-40-64-104-113-31-51-102357125100-50113-103-113123-9
873-627067-25-908-10131118125122-71-115-37-1850-1055851-31410-77-7312-36848124-26104-10711043-2048
-48-12666611759121127-2960-1571-9-95-98-1036911610-74221-32-25114-108749933-7147562114-3635-101-81
-1058-73108-61-78-128-116-715155112714-37-18-84-8331-2716-1174257-76-5-1598-15-12875-98-7329632178
-10714-123-6312212-1028359-56-76-683-873987-2120-845954-7617-71-57999828110], size=926
at Microsoft.Exchange.Rpc.ClientAsy
FailureContext :
ExtensionXml :
ResultType : Failed
RetryCount : 0
ResultName : 75641e34aa494fceaad7181b56dd7b29-OutlookRpcDeepTestProbe/NEW2013
IsNotified : False
ResultId : 1748063
ServiceName : InvokeNow
StateAttribute1 : Momt
StateAttribute2 : UnknownIssue
StateAttribute3 : PW-SC-01.companyname.local
StateAttribute4 : Unknown
StateAttribute5 : {C54AD38D-1E00-4F53-ABAE-26518C3FF82F}
StateAttribute6 : 0
StateAttribute7 : 0
StateAttribute8 : 0
StateAttribute9 : 0
StateAttribute10 : 0
StateAttribute11 : Momt
StateAttribute12 :
StateAttribute13 : VgEAVAdXaW5kb3dzQwBBCEtlcmJlcm9zTA9QV0NPTU1TXG5hdGhhbmhVLlMtMS01LTIxLTIwNTc0OTEwMzItMzE4NDA2NDk3OC
0xNTQ2MTE0ODM1LTI2MzJHHQAAAAcAAAAtUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtNTEzBwAA
AAdTLTEtMS0wBwAAAAdTLTEtNS0yBwAAAAhTLTEtNS0xMQcAAAAIUy0xLTUtMTUHAADAE1MtMS01LTUtMC0zNDc3ODcxMTMHAA
AALlMtMS01LTIxLTIwNTc0OTEwMzItMzE4NDA2NDk3OC0xNTQ2MTE0ODM1LTQxODcHAAAALVMtMS01LTIxLTIwNTc0OTEwMzIt
MzE4NDA2NDk3OC0xNTQ2MTE0ODM1LTUxMgcAAAAuUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtND
E3NAcAAAAuUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtMzU3MAcAAAAuUy0xLTUtMjEtMjA1NzQ5
MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtNDEyMgcAAAAuUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMT
Q4MzUtMTE2NAcAAAAuUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtMTE0MQcAAAAuUy0xLTUtMjEt
MjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtNDE1MwcAAAAuUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LT
E1NDYxMTQ4MzUtNDE0NQcAAAAtUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtNTE4BwAAAC5TLTEt
NS0yMS0yMDU3NDkxMDMyLTMxODQwNjQ5NzgtMTU0NjEx
StateAttribute14 :
StateAttribute15 :
StateAttribute16 : 0
StateAttribute17 : 0
StateAttribute18 : 0
StateAttribute19 : 0
StateAttribute20 : 0
StateAttribute21 : /o=companyname/ou=first administrative group/cn=Recipients/cn=NathanH
StateAttribute22 : EMSMDB.Connect()
StateAttribute23 : https://pw-sc-01.companyname.local:444/rpc/rpcproxy.dll?PW-SC-01.companyname.local:6001
StateAttribute24 : Negotiate
StateAttribute25 : [33]10/11/2014 13:50:03 [FAILED!] EMSMDB.Connect();
Identity : fcd6159dd8fe42aebf10100cc4934356
IsValid : True
ObjectState : New

I just purchased an Apple TV. I have a pc running windows 7. It is connected to a router and the router is connected to a wireless router. I connect my iPhone, iPad and apple tv to wireless network but do not know how to put the pc on the wifi network

I just purchased an Apple TV. I have a pc running windows 7. It is connected to a router and the router is connected to a wireless router. I connect my iPhone, iPad and apple tv to wireless network but do not know how to put the pc on the wifi network so the Apple TV can do home share.

I don't mean to be facetious but sometimes the simplest things are overlooked. To connect to your library you have to have the computer where the iTunes library is located running and with iTunes open. It also needs to be on the same network. My network is dual band and works with either stream but a friend of mine does not. He has to set the computer and the Apple TV to the same band. Hope this helps.

How to split a single file and then route it to different systems

Hi All,
I have a requirement like...my incoming file(single file) needs to be split into 3 files based on a field "company code".and then route it into different systems.
my incoming file is like this .....
Header,name,.....,.....,........,.....,.....
Detail,.....,.....,.....,.....,......,companycode(100),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(101),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(100),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(102),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(101),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(102),....,.....,......
EOF.
I need to split this file and my ouput file should be like this
For 1st system
Header,name,.....,.....,........,.....,.....
Detail,.....,.....,.....,.....,......,companycode(100),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(100),....,.....,......
EOF.
For 2nd system
Header,name,.....,.....,........,.....,.....
Detail,.....,.....,.....,.....,......,companycode(101),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(101),....,.....,......
EOF.
For 3rd system
Header,name,.....,.....,........,.....,.....
Detail,.....,.....,.....,.....,......,companycode(102),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(102),....,.....,......
EOF.
and then send it three systems based on company code.
Can anyone tell me how this can be achieved?
Thanks,
Hemanth.

Hi Nallam,
I tried the same thing but in the input file as there are different company codes,It is not splitting the file into three parts and sending only concerned data to repective system instead the whole file is going to the all the systems.
I came to know that the file has to splitted in the mapping only, we are able to do it by using mapping but the problem is in Routing,as in receiver determination we makes use of source structure for giving the condition. Can you please help me on this.
Thanks,
Hemanth.

EDI - 753Routing Request and 754 Routing Instructions transactions- what SAP ECC6 EDI output type, msg type, msg code, basis idoc is best practice to generate the idoc?

One of our Trading Partner wishes to implement the 753 Routing Request and 754 Routing Instructions. Can anyone give me best practice answer the following Questions? We are on SAP ECC6 R3
What Application? i.e. V2, V7?
What output condition to use? i..e. LALE, LAT2, SEDI????
What Message type? i.e SHPADV?
What Basic Idoc Type? i.e SHPMNT05?
What Message Code? i.e. SHPM?
What Process Code? i.e. SHPM??
What Function Module? i.e. IDOC_OUTPUT_SHPMNT??
Does the SAP Transpotation Module have to be configured for this to be implemented?
Your comments are greatly appreciated, we have until Nov 1 to be compliant?

Good Morning,
While I did not get any responses from my question, yes, I was able to determine what needed to be configured. I hope the below will help you: This is for SAP ECC6
The output application for the 753 Routing Request is "V7"
The output type is "SEDI"
Transmission medium is "6"
The Basic Idoc type is "Shipmnt05"
when setting up your Partner Profile (WE20) add:Message Partner Role "SP" with Message type "SHPADV', Message coed "753", Basic Type "SHPMNT05", Message Control add Application "V7", Message type "SEDI", Process Code "SHPM".
also http://scn.sap.com/thread/698368 pages 14 and 15 were helpful.
I have not configured the Inbound 754. For now the inbound 754 Routing Instructions will be emailed to our traffic department.
Thank you,
Have a great day,
jane

I have one PC with a modem and linksys router #BEFW11S4 i...

I have one PC with a modem and linksys router #BEFW11S4 installed. I have 3 other PC's which connect to it via Linksys wireless-G adapters. Things have been working just fine until recently when now at least twice a day my Pc's with the adapters lose connection with the router. Any suggestions?

Open routers set up page ..... click status & see the firmware version ...... if required update ....download the latest firmware from http://www.linksys.com/download ........

When I try to Home-Share It works most of the time. It will always show up, but sometimes I tap on the icon of my library then it wont load, I restart my computer, IOS Divice and my router It still wont load my Library .... WHY!

When I try to Home-Share It works most of the time. It will always show up, but sometimes I tap on the icon of my library then it wont load, I restart my computer, IOS Divice and my router It still wont load my library. I even went and tried to reinstall Itunes and everything nothing works.

Hi,
/Users/sarahschadek/Desktop/Safari.app/Contents/MacOS/Safari
Move the Safari app from the Desktop to the Applications folder.
Restart your Mac.
That's why you see this:
When I try to do the updates my computer says it has ready it goes through like it is downloading them then at the end it says some of the files could not be saved to "/" files.
After your restart your Mac, click the Apple  menu (top left in your screen) then click: Software Update ...
Carolyn

Mi-Fi and a router

Similar Messages

Maybe you are looking for