Mi iphone se queda en la manzana
Hola mi nombre es Blanca Mejía, lo que me paso es que actualizando la ultima versión de ios7 mi teléfono se apago de la nada.
Enciende solo cuando lo conecto a una computadora pero no pasa de la manzanita.
itunes no lo reconoce y no tengo forma de entrar.. ya me estoy desesperando he intentado de todo.. no me importaría tener que restaurarlo de cero con tal que revivaaa!!!
Es muy probable que se daño algún componente interno y se requiera un reemplazo total del dispositivo. Lo que puedes hacer es llevarlo a una Tienda Apple o algún proveedor de servicio autorizado Apple para evaluación. Ahí te dirán si se puede hacer algo o tengas que invertir en uno nuevo.
Similar Messages
-
HT201269 mi iphone 4 esta en la manzana y no lo puedo reconocer mi pc ni itune
Mi iphone 4 esta en la manzana y no pude reconocer mi pc ni itune
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Al conectar mi iphone se queda trabado el itunes, que puedo hacer?
al conectar mi iphone se queda trabado el itunes, que puedo hacer?
Google translate:
my ipod 2g locks only appears when you turn the manzanita and did not get off and tried to restore it on itunes but itunes or compu recognize the ipod I can do
iPod touch, iOS 4.2, 2g
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Mi iphone no sube se queda en la manzana y salen una letras
mi iphone no Sube sí Fits la manzana y salen Una letras
Intente restablecer el iPod touch desde el modo de recuperación, como se muestra aquí -> iOS: no se puede actualizar o restaurar
-
HT4623 le di restaurar a mi iphone 3 y ya no prende se queda en la manzana
le di restaurar datos a mi iphone 3 y ya no prende se queda pensando enla manzanita
Es muy probable que se daño algún componente interno y se requiera un reemplazo total del dispositivo. Lo que puedes hacer es llevarlo a una Tienda Apple o algún proveedor de servicio autorizado Apple para evaluación. Ahí te dirán si se puede hacer algo o tengas que invertir en uno nuevo.
-
Mi iphone se queda en modo recuperacion
Hola pasaba por aqui am para pedir ayuda
Tengo un iphone 3g y decidi restaurarlo pero am al momento que casi se restaura mmmm se queda como por 5min y de ahi no avanza y depues me dice que
hubo un problema en la restauracion es el error 1015
Ya intente cerrar Itunes y volverlo a abrir incluso reiniciar el ordenador y nadaProbaste restaurándolo en modo DFU conectado a iTunes, se extrae el software del iPhone e instala el mismo.
Y acá está la lista de todos los errores para que busques el tuyo.
http://support.apple.com/kb/TS3694?viewlocale=es_ES
Saludos!! -
El iphone se queda sin servicio me pide resturación pero sigue sin servicio solo funciona con wifi
Mi iphone 4 se queda sin servicio, me ìde retauracion, lo he hecho pero nada sigue igual, a veces viene la cobertura otras se va. Con wifi si funciona. De que puede ser? Que debo hacer?
Hola Carmencabanillas, a mi me pasa el mismo problema de "SIN SERVICIO", ya descarté que fuera la microsim lo probé en otro equipo y funciona bien, probé microsim de otros operadores pues esta desbloqueado mi iphone 4 y no funciona; lo llevé a mi operador "CLARO" en Colombia y me dice que no esta reportado ni nada de eso que deberia funcionar, entonces descartado microsim y que no esté reportado me queda por decir que es el telefono, este lo he restaurado las veces que quieres, le he restablecido las conexiones de red en fin, se ha hecho de todo a nivel de software y nada.
El problema es que parece ser daño tipo hardware, pero aca en Colombia no lo repara el operador hay que enviarlo a los Estados Unidos... eso me costará un ojo de la cara... que mal por Apple.
Quien me puede ayudar con este caso?
Alguna duda me escriben a [email protected]
Saludos,
Ruben
Message was edited by: rquinchia -
Mi iphone se queda sin cobertura
mi iphone 5 desde un tiempo para aca se queda sin cobertura la misma va y viene asi pasa todo el dia, pero cuando estoy conectado al WIfi funciona bien ademas cuando se queda sin cobertura se queda colgado y cuando vuelve la cobertura funciona bien pero asi pasa todo el dia, ya lo he restaurado con itunes y nada sigue igual tambien lo actualice al ios 8 y nada sigue igual le retiro el chip y nada sigue igual me pueden ayudar
Es problema del equipo, un amigo tiene el suyo en Telcel y le pasaba lo mismo lo llevo y le dieron uno nuevo,
el mio lo que tiene es que en el menu de GENERAL>AJUSTES>TELEFONO la pestaña de LlAMADA EN ESPERA no cambia y la de ID cambia de activo a desactivado de manera automatica y por lo tanto no puedo hacer llamadas ya lo mande a garantia pero la verdad si estoy penando en venderlo en cuanto regrese y comprar un HTC que no tiene problemas de servidor o de linea con Telcel, es un pexxx que si compraste tu cel en apple te digan que el pedo es tu compañia celular y si lo compras en telcel u otra los de apple te manden ala fregada porque no lo compraste con ellos -
Mi Mac se queda en la manzana gris y pensando que puedo hacer???
Quise instalar una aplicación para limpiar y ordenar mi Mac y se quedo trabada la apague y hoy solo
Se ve la pantalla blanca con la manzana y el circulito de que esta pensando...There is a troubleshooting article at the link, but it is only in English, sorry.
Mac OS X: Gray screen appears during startup
I would try starting up in Safe mode, and dragging the application you installed to the trash. That may be enough to get rid of it. -
Necesito saber que hacer con la Ipad Air ya que esta no me inicia y se queda solo en la manzanita, y es la segunda vez que me lo hace, la compre en diciembre y en menos de un mes ya me ha presentado dos veces este problema.
I need to know what to do with the Ipad Air as this does not start me and left alone in the manzanita, and is the second time that makes me buy it in December and in less than a month has already presented me twice this problem .
-
aun no he podido restaurarlo.
Intente restablecer el iPod touch desde el modo de recuperación, como se muestra aquí -> iOS: no se puede actualizar o restaurar
-
Mi iphone se mojo y al conectarlo a mi computadora enciende pero se queda en la manzana y no abre nada..
alguien sabe si tiene solucion???
Gracias..Mantenga pulsado el botón de inicio y el botón de encendido al mismo tiempo,durante diez o más segundos para hacer un reinicio.
-
HOLA CHICOS Y CHICAS PODRIAN AYUDARME, ORIENTARME FIJENSE QUE MI IPHONE SE QUEDA SIN SEÑAL SE QUEDA EN BUSCANDO... Y DE AHI NO PASA YA LO LLEVE A TELCEL Y 5 VECES ME LO COMPONEN Y A LA SEMANA VUELVE Y NO ME LO QUIEREN CAMBIAR AYUDENME YA LO RESTAURE Y MARCA ERROR. ESPERO SU AYUDA GRACIAS
Me pasa lo mismo pero con un Iphone 5. El celular se quedó sin señal y lo restauré de igual manera. Lo puse en modo de recuperación (pues a pesar de tener mi cuenta de Icloud no me permitía restaurarlo) y traté de restaurar el equipo. Cuando estaba restaurando el firmware me pasó lo mismo del Error Desconocido (3)
-
Mi ipod queda en la pantalla de inicio
Hola Amigos de la comunidad de la manzana
Tengo mi ipod y lo intente Restaurar de fabrica, Pero al Hacerlo se queda en la manzana de inicio, alguna otra idea?Google translate:
Hello Friends of the apple community
I have my ipod and try Restore factory, But Do it stays on the apple boot, any other ideas?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
que pena es para ver quien me puede ayudar
mi mac pro no arranca se queda en la manzana gris con fondo blanco e intentado con los comandos pero no quiere arranca ayer lo deje un tiempo en el blanco con gris y despues la manzana gris se volvio un simbolo de prohibido que puedo hacer porfavor ayudahttp://support.apple.com/kb/TS2570
Maybe you are looking for
-
I am afraid to download the new update software ios 6.1.6. Because everytime I let it put new software on, It makes my Ipod 4th generation mess up one way or another. Usually it makes the wifi go off and I cannot get it back on. Then I can't even use
-
Dataset can not be open error while running report rtcctool
Hello Experts, While running report rtcctool we are gettin following dumps the says ABAP runtime errors DATASET_CANT_OPEN Occurred on 05/27/2011 at 10:00:52 Unable to open file "/usr/sap/B**/DVEBMGS00/sec/SAP_AGS_OLCNT_VERIFY.pse". I am
-
Unable to print ... Scanning and copying is working good ..
We got our HP Deskjet Ink Adv 2060 August 2012. since then it works really well ... until last 2days ago when we want to do printing but it started not to print .. the dialogue box is not appearing to tell what something is happening ... Can you tel
-
Labview 2011 with TruckSim 8.01 Automated Runs
Hello, I have been using Labview on and off for a few months so I am still fairly new. I skimmed through the help files and various support and could not find the answer, but sorry if this is an obvious and basic question. I am running TruckSim with
-
Deactivate 'APPROVE' button in the ALV in RCATS_APPROVE_ACTIVITIES.
Hi all, I am trying to deactivate 'APPROVE' button in the ALV output of the program RCATS_APPROVE_ACTIVITIES. Any ideas??? Thanx in advance!!!!