Mi ipod nano no prende y no carga

mi ipod nano no prende

Google trnslate:
YESTERDAY WE WAS GOING THE SONGS AND BEGAN ISO 7 INSTALLATION AND PUT ON WHITE AND SHUT OFF, ANYONE KNOW I CAN DO?
Try:                                               
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable       
- Try on another computer                            
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar                                     
Also, in the future do not use all CAPS. It is shouting

Similar Messages

  • HOLA! MI IPOD NANO NO PRENDE :( Y ES NUEVO

    AYER LE ESTABA SUBIENDO CANCIONES Y COMENZO LA INSTALACION DEL ISO 7  Y SE PUSO EN BLANCO Y SE APAGO, ALGUIEN SABE QUE PUEDO HACER?

    Google trnslate:
    YESTERDAY WE WAS GOING THE SONGS AND BEGAN ISO 7 INSTALLATION AND PUT ON WHITE AND SHUT OFF, ANYONE KNOW I CAN DO?
    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     
    Also, in the future do not use all CAPS. It is shouting

  • Mi ipod nano 7th generacion no enciende ni carga

    tengo un ipod nano 7G, dejo de prender sin razon alguna, no carga, no lo detecta itunes, ya probé con presionar el boton Home y el boton de encender y no hace nada.

    If you don't see your connected device in iTunes for Mac - Apple Support

  • Mi ipod nano de 1eraGeneracion solo carga no lo reconoce ni la pc ni el itunes que hago?

    Nescesito ayuda con mi ipod nano de 1era generacion mi pc no la reconoce solo lo carga y el itunes igual

    Google translate:
    my ipod touch is not installed when the PC connected to the device driver software is not installed correctly says the message and therefore is not recognized or the compu or itunes
    See:
    http://support.apple.com/kb/TS1538?viewlocale=es_ES
    link is in spanish

  • My IPOD nano no lo reconoce el pc

    Cuando conecto mi Ipod Nano de 4 GB al pc, el no se reconoce ni como IPOD, ni como unidad de disco, el IPOD carga normalmente, ya cambie el cable de conexion, pero todo sigue igual, no tengo manera de ingresarle canciones.

    mabytos wrote: (Google Translate)
    When I connect my iPod Nano 4 GB to pc, the not recognized or as IPOD, or as a disk drive, IPOD normally load and replace the connection cable, but as usual, I have no way to admit you songs.
    Pruebe una o varias de las siguientes acciones:
    - Reinicie el equipo
    - Desinstalar y Resintall iTunes
    - Reinicie el iPod (no se borrará todo)
    - Vaya a Mi PC (Windows XP) o Equipo (Windows Vista o 7) y ver si se muestra (debe mostrar como una cámara digital)
    - IPod Restore (se borrará todo)
    - Asegúrese de iTunes y iOS firmware está actualizado.
    Espero que esto ayude.
    What I said:
    Try one or more of the following:
    - Restart you computer
    - Uninstall and Resintall iTunes
    - Reset iPod (will not delete everything)
    - Go to My Computer (Windows XP) or Computer (Windows Vista or 7) and see if it shows (should show as digital camera)
    - Restore iPod (will DELETE everything)
    - Make sure iTunes and iOS firmware is up to date.
    Hope this helps.
    Message was edited by: keeferaf

  • 4gen ipod nano not holding charge.

    Hi,
    I got a 4gen ipod nano 8gb, i havent used the ipod since a year almost & its been lying in the draw. Today when i tried to switch it on it had no power which was obivious. So i put it for charge on my imac but even after 4-5hours leaving on charge whenever i disconnect the cable the ipod just dies off. I even tried plugging it straight through the usb charger but still doesnt remain on for even a second asoon as i remove the cable. If the carger is on it operates fine. Have i caused "deep discharge state" in my ipod batter? just read that in the user manual where they say"how to store ipod for long perods" any help guys to get it back to life?
    Thanks..

    It's likely that the battery is dead and in need of replacement.  The lithium-ion battery needs constant activity in order to maintain its capacity and ability to build up a charge.
    B-rock

  • I am trying to use itunes, it will not open at all, have uninstalled and downloaded new software and 64bit for windows. i have an old ipod nano from about 5 years ago. anything i can do, even to view my purchases and watch/listen to music etc?

    ok i have a advent roma laptop with window 7. my itunes used to work fine, completely. every time i plugged in my ipod it was ok. recently my ipod was not working so i never bothered with itunes, however i have movies/tv prog that i purchased and would like to view them. i have an ipod nano from about 5 years ago, the problem with thet is, it switches on, but the circular control panel does nothing, all you can do is lock and unlock it - nothing else.
    i tried to download new version of itunes, then uninstalled my origonal version, incase it was corrupted etc, i then again tried to down load new version and also version that is windows 64bit. still when i select the downlaod to open as son as it is finnished nothing happens. and now my desktop shortcut has dissapeared. before when it was there, id double click it, nothing, right click to open it, nothing.
    im not the best technically minded but i just dont see what im doing wrong here, please help

    Perhaps it would be helpful for you to view the page source code of this page
    http://www.alanwork.com/
    As you can see, the submenu code links are immediately below the top level code, and are
    wrapped in their own  <UL> </UL> tag pairs.
    Hope that helps

  • Can i have an ipod mini and an ipod nano on same account

    My daughter got an ipod mini 2 christmas's ago and so we have an itunes account. This christmas my son got an ipod nano because they had discontinued the minis. My son likes a lot of the songs that my daughter had on her ipod and i really dont want to use all that money just to rebuy songs. I was wondering if there was any way that I could use one account and they both have the same songs on their ipods.
      Windows XP  

    There are a couple of methods for using more than one iPod on a single computer. One way is is to set your preferences so each iPod is updated with only certain playlists within one library. You could create one playlist for the Mini and one for the Nano. Each playlist can have whatever songs you like in it drawn from the single library. Have a look at the article linked below: How To Use Multiple iPods with One Computer

  • IPod Nano 4Gb (2nd Gen) not detected by Windows or iTunes

    I am hoping someone can help me with this as I am at my wits end.
    When I plug my iPod into the usb port, it begins the charging process, but neither windows, nor iTunes will detect any new devices. I have tried the 4 R's (the fifth needs a connection with iTunes), putting it into disc mode, and even on 3 different windows computers, but no dice. To save the no doubt normal questions, The usb ports are 2.0, and brand spanking new, which i have tested sucessfully with other usb devices, so I know it's not the usb port. I have the latest drivers & updates installed, and the latest version of iTunes also installed.
    Other potentially useful info:
    The model is iPod nano 4bg alu 2nd gen
    It's not new, i was given it as a gift by a friend who upgraded to the video model.
    Though I can't be sure, I suspect that the dock cable isn't an apple product. Given that *very few* places where I live sell official iPod accessories, it is difficult for me to check.
    Like I said, i really hope someone can help me, I really don't know how long i can go listening to my friends rather dubious music tastes...

    hi,
    try the following article my friend...it will definitely resolve your problem..
    http://docs.info.apple.com/article.html?artnum=302420
    http://docs.info.apple.com/article.html?artnum=61711
    Regards,
    Sam

  • TS1363 My ipod nano 5th generation is no longer recognized by itunes, and won't play any of it's music.  It still shows it all listed, but freezes up if you select a song to play.  Is there a way to restore it?

    My ipod nano 5th generation will no longer play any of it's loaded songs.  It still plays the video that is on it, and the radio works.  It is not recognized by itunes and I have gone through all their help steps.  Is there some other way to restore it?

    If the iPod is defective and not abused Apple will exchange it at no cost under your warranty.
    Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • My ipod nano is no longer recognized by itunes after I installed windows 8.1.  The ipod nano still is recognized and works with a Windows 7 computer

    My ipod nano is no longer recognized by itunes after I installed windows 8.1.  The ipod nano still is recognized and works with a Windows 7 computer

    Hello, Pete. 
    Here is an article I would recommend going through when an iPod is not recognized by iTunes or the computer.
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Usually the resolution is updating the Apple Mobile Device Driver.  See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H. 

  • Ipod Nano no longer recognized by Itunes

    I have an Ipod Nano that I used with my Toshiba and Itunes. About a month ago, I got an Ipod Touch (lots of fun)and used it with the same Itunes. It worked fine. However, it does not recognize the Nano anymore. It charges but nothing else happens. Any thoughts? The Nano is recognized by other computers.
    Thanks!

    I've run into similar problems. I have four iPods (a firewire 3G, a Shuffle, a nano and a 5G) attached to my PC and I've yet to get all of them to show up in iTunes at once, even after restoring and reloading each of them. The Shuffle shows up for a few seconds, then goes away. The Nano, 3G and 5G stick around for a while, but if two of them are connected to the system, one of them (usually the nano or the 3G) vanishes from iTunes when the third is connected.
    ITunes won't say so specifically, but you won't be able to successfully restore a device unless it's the only one connected to your system. What's more, if you have more than one iPod connected when you attempt to restore one, there's a good chance you'll screw up your other one instead. No big deal, unless you're on your way out the door and must now wait for 6000 songs to resync, but still a hassle.
    3G, Shuffle, nano, 5G   Windows XP Pro   3.2 GHz Core Duo, 2GB RAM, 512 GB 1900 XTX

  • My ipod nano will no longer sync with itunes since i have purchased an iphone 4s and synced it with itunes.

    My ipod nano will no longer sync with itunes since i purchased an iphone 4s and synced the phone with itunes.  When I plug my ipod into my imac, it does not even read or recognize my ipod.  What do i do?

    Are you using the original cable that came with Nano and not your iPhone's cable?  Have you worked through the troubleshooting in this Apple support document?
    http://support.apple.com/kb/TS1410
    B-rock

  • Ipod nano shuts down windows as soon as is connected

    I have just purchased an ipod nano 4th generation, downloaded itunes software with no problem, the nano is fully charged, this has been done on a different computer, my problem is that soon as I connect the ipod via the usb cable the pc shuts down and then tries to restart itself (no blue screen)it will not restart though whilst the ipod is connected, i have read that i should update usb drivers but am not able to see which one the ipod connects to as the shut down is fairly instant, has anyone else had this problem and how could it be resolved, need big help please

    I've experienced the same problem since 21st November and attended the Ipod Genius Bar at Oxford Street and still no resolution. Today i have both my childrens Nano 4th Generation working/syncing etc.
    The Nano identifies an apple ipod driver when connected to the computer for the first time when online. Itunes refuses to accepts this and shuts down, similar to your problem.
    Without being online or opening itunes i opened computer management then device manager and disable the apple driver.
    I then opened the assigned a USB Mass Storage Device driver to the Nano. I then opened the Nano in windows and found several files including calender etc on the disk. I deleted all the contents and disconnected it from the computer through the eject device feature.
    I then opened Itunes and connected the Nano and it recognised it and required it to be fully restored which i did.
    I have since connected it to Itunes Store etc and no problems.
    By the way i have removed both Itunes & Quicktime no less than eleven times and reassigned drive letters to the Nano as well as re-create my itunes library on a seperate disk drive but the problem stems from the device drives and the programs/files already on the Nano.
    I hope this helps.

  • Windows vista 64 bit and ipod nano

    Hi, we are having problems getting our 3 new ipod nano generation 5 to work on our windows vista computer. Itunes won't recognize them have tried to uninstall itunes but get a message to verify we have sufficient access to that key, or contact support personnel, and then we click ok and it stops the uninstall does anyone know how to correct this problem or what we need to do to get the ipods to work on itunes with windows vista 64bit computer? I saw an answer for a 32bit computer but read that it is different for a 64bit computer. Thanks!

    I, too, am having the same problems. Very frustrating to have a nano 4 generation that needs only the latest iTunes software but a computer that requires 64 bit software.
    If you get an answer, let me know. I even paid to have music loaded on my nano ipod yesterday and because it was attached to my computer, when I booted up, it somehow went to checkdisk mode and cleaned all the music out! Am ready to throw it out and get a non-Mac ipod instead. But if you have THE answer, I'd really like to hear about it. Thanks.

Maybe you are looking for

  • How can i plot a 600mm * 3200mm PDF created from Illustrator in perfect quality?

    Hi, I have this huge 600mm * 3200mm plan drawing, which i want to plot. I have importet Autocad .DWG files into illustrator and mingled with the lineweights and colores.  But, when i save it as a .PDF and send it through the plotter, it comes out all

  • Broken UI in Smart playlists

    I have found that when you want to add "Playlist is" statements in a smart playlist (which I use A LOT for merging my favourites), the UI is basically broken. It is impossible to tell a "Folder" in the iTunes hierarchy from a Playlist.... In fact, yo

  • Select query, case statment

    Hi, I have two tables Registration and Place. "Registration" table has Name and Registration_id column and "place" table has Registration_id, task_id and state columns. So both tables have inner join on Registration_id column. now one Registration_id

  • Regarding saving of a business card in my blackberry

    hello, Is there any way or code of saving the business card or v card ,when business card comes from any phone . please help thanks and regards amrinder

  • Has anyone gotten PDAnet for tablet working on the Thrive?

    I have been trying to get my thrive to connect to my phone through Bluetooth and PDAnet tablet. It connects for about 5 seconds and then disconnects. Has anyone else had luck with this?