Mi itunes no detecta mi ipod touch, mi itunes no detecta mi ipod touch

mi itunes no detecta mi ipod touch
kien m ayuda

Here:
iOS: Device not recognized in iTunes for Windows
or
iOS: Device not recognized in iTunes for Mac OS X

Similar Messages

  • IPod Touch, not detected in Windows or iTunes...

    First of all, hello to everyone...
    i want to say that i read a lot EVERYWHERE about my issue and still i couldnt find a solution...
    the problem is easy, i have a 3rd gen ipod touch, OS 4.2.1 now fully working... but, it's not detected in windows or itunes, as simple as that, and as u all have read in lots of other posts...
    my ipod is now working because i took it to an apple store and they charged it in a MAC and they had no problem at all. the MAC detected the ipod, with all its content and my ipod's name...
    but when i took it home -this has been hapenning since maybe... 5 MONTHS!-, i plug it in my PC and nothing happens...
    ok, first of all, my spec... win vista home premium 64 bits, last version of itunes...
    i tried ALL the solutions provided in APPLE official support page, and nothing happens... that means:
    1- completely uninstall itunes and then reinstalling it... i ALSO FORMATED my entire hard drive twice!!!!
    2- tried all USB ports and even an entirely different PC and nothing happened
    3- bought 3 different IPOD to USB cables and nothing happened
    4- tried setting ipod to restore, that way itunes SOMETIMES detected the ipod but i coulnt restore because of different error codes, so i had to take it several times to apple store to "unblock" it...
    the only way it works -detection and charge- is with MAC computers or dock systems such as an iHome my gf has thats the way im charging it now, but otherwise it wont work...
    i would really appreciate any help, since idont know what else to do!!
    thx in advance!!

    HI I was having some other problems getting my itouch to restore because it was not being recognized in itunes and kept erroring out. Now it has finally restored after I updated all kinds of drivers and removed and reinstalled itunes and apple software a million times,(yes this is all after installing itunes 8.1 and paying for an itouch upgrade as well) Now itunes says it cannot do anything with the ipod because it is getting an invalid response from the device. So it won't put anything back on my itouch or even show that I have plugged it in. I emailed tech support, If I find anything out I'll let you know, will you do the same for me?

  • My ipod touch 3rd gen is not detected in itunes

    When my itunes updated to 10.5 version it hasn't detected my ipod..at first i can see it synching but after a while it disappeared.it's my first time to have this bug on my ipod..and i was worried because i could no longer update my ipod touch using the itunes..i already check the trouble shoot for ipod touch but to my disappointment it was no use...still same problem...i want this prob fix as soon as possible..pls help...

    http://support.apple.com/kb/TS1538
    And for the disabled iPod:
    http://support.apple.com/kb/HT1808

  • IPod Touch accelerometer not responding, can't detect in iTunes to Restore

    Well here's an odd problem. My 64GB iPod Touch 3rd gen suddenly stopped responding to rotation/movement from the accelerometer.
    The Rotation Lock feature is off. I've toggled this on and off many times. There is no icon in the status bar indicating it is on.
    Everything is stuck in portrait mode. When trying to play a game that relys on the accelerometer the game will also not respond to movements.
    I followed Apple's KB directions and held down the Sleep+Home buttons to hard-reset the iPod, and that seemed to occasionally help, but sometimes the accelerometer still would not respond. I plugged in the iPod, went into iTunes (latest version, 10.1.2) and did a full Restore, erasing and resetting everything to default 4.2.1 firmware. I did not revert to a previous saved backup, so there should be no trace of the previous firmware at all.
    After the Restore, I synced my music and apps back to the iPod, and the accelerometer seemed to work fine. After a while, the screen would not rotate again, and apps using the accelerometer would not respond. Again, I checked that Rotation Lock was off.
    I plug the iPod back into my MBP, hear the "Ding" charging sound from the iPod, but iTunes does not detect it! However, it is listed in System Profiler under USB as "iPod":
    iPod:
    Product ID: 0x1299
    Vendor ID: 0x05ac (Apple Inc.)
    Version: 0.01
    Serial Number: xxxxx
    Speed: Up to 480 Mb/sec
    Manufacturer: Apple Inc.
    Location ID: 0xfa140000
    Current Available (mA): 500
    Current Required (mA): 500
    Extra Operating Current (mA): 500
    To rule out my user account, I used a Guest account, opened iTunes, and it still doesn't detect the iPod, although it still appears in System Profiler.
    Is this some software bug? Is the hardware at fault? I've been out of warranty by about a month now, as I bought it a year ago, so it's kind of frustrating that my iPod would suddenly bug out like this. It's still usable, but it's annoying to be forced to type everything in portrait, and be unable to use app that relys on the accelerometer.
    Message was edited by: ThreeD912
    Message was edited by: ThreeD912

    My money's on an intermittent hardware issue. Replacing the logic board would most likely fix it.
    Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
     MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

  • I'm using ipod touch for a year now. I was using this morning and suddenly the ipod doesn't work at all maybe it got wet from my bag but there wasn't wet stuff in there. and itunes said iTunes has detected an iPod in recovery mode. please help me

    I'm using iPod touch for a year now. It was doing fine this morning but in the afternoon suddenly when I took it out of my bag, the screen was just black and it wouldn't turn on and stuff. So I thought it didn't have battery so I charged it didn't work. I plugged to the computer and it said iTunes has detected an iPod in recovery mode. You must restore this iPod before in can be used with iTunes.
    Maybe my bag was little wet today but i don't think that is why.. since it wasn't that bed.. just some paper was wet and stuff..
    What should I do..? Please help me.

    Connect to the Computer you Usually Sync with and Follow the Steps Here...
    Recovery Mode
    http://support.apple.com/kb/HT1808

  • Im having problems with my iPod Touch 2nd gen. It's disabled and tells me to connect to iTunes. But when I do that, iTunes wont detect the iPod.I have put the iPod in USB- mode, and by that I mean I have tried connecting with holding the home button Help?

    It's disabled and tells me to connect to iTunes. But when I do that, iTunes wont detect the iPod.I have put the iPod in USB- mode, and by that I mean I have tried connecting with holding the home button when connecting the USB. Help?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • My iPod Touch is in Recovery Mode and iTunes Won't Detect It ?

    iPod Touch 4G
    iOS 5.1
    Purchased 2010
    I Opened Up iTunes and Upgraded to iOS 5.1.1 from 5.1 as a "Download Only". The Next Morning I Go To My Computer Plug In My iPod and Update. My iPod Then Goes into Recovery Mode and When I Quit Recovery mode It goes straight to recovery mode again with and without the cable. iTunes does not detect it when i plus it in and neither does my computer, i have tried restarting apple mobile support and that does not work. The nearest apple store is 20 miles but i could go there.

    See if you can kick it out of recovery mode with RecBoot.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • HT1386 Both my iPod touch and iPad have been syncing properly with iTunes, until todat that is. I downloaded iTunes 11.1.5 and now iTunes isn't showing up/reading/detecting any of my devices. I can no longer sync both my iPod touch and iPad. Please HELP

    Both my iPod touch and iPad have been syncing properly with iTunes, until todat that is. I downloaded iTunes 11.1.5 and now iTunes isn't showing up/reading/detecting any of my devices. I can no longer sync both my iPod touch and iPad. Please HELP

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates

  • IPod Touch is being detected by Windows Vista but not iTunes

    After updating iTunes to 9.0.1 my iPod Touch is being detected as a camera by my Windows Vista computer, but iTunes is unable to detect my iPod.
    I have all ready tried using different USB ports and a different USB cable with no success. I have also tried uninstalling and reinstalling iTunes with no luck.
    Please help!

    I have the same issue here. Please help...

  • ITunes not detecting iPod Touch

    So I just got the 32GB iPod Touch today. 2nd Gen of course.
    Already had iTunes in my PC before this. So as how it should go, I plugged the iTouch in, it started to sync my music. Okay so that was normal. Then it asked to update it's firmware to 2.2. And I said yes.
    After updating it asked to install, but my songs were still syncing with the iTouch. I said yes to install the updates anyway. It started installing and suddenly my iTunes just crashed, saying some error and it couldn't install the latest firmware. Ever since then iTunes won't/can't detect my iTouch anymore but Windows can.
    The driver installed is 'Apple Recovery (iBoot) USB Driver', is that the right one? That's about as far as it goes now. And when I turn on the iTouch it just shows that picture of the USB and an arrow to connect to iTunes.
    Annoying enough, I've tried every single solution I could find on this forum. Even with the usbaapl.sys copy paste into inf folder, still doesn't work. Countless times reinstalling iTunes still doesn't work, reset the iTouch, still no hope. So if someone would please? I understand I'm not the only one going through this. I'm on a 64bit Vista, and YES I have iTunes 64bit version installed. I'm thinking if I should go to the Apple Shop to ask for help but I doubt they'd be of any service/knowledge of this. Really really frustrating. Please help, someone!?

    Joshes wrote:
    I'm thinking if I should go to the Apple Shop to ask for help but I doubt they'd be of any service/knowledge of this.
    Hello, 
    Why not? Apple staff their retail stores with 'Geniuses' for exactly this reason - all part of the Apple experience. You can reserve a booking online first:
    http://www.apple.com/retail/
    Alternatively have you tried working through some of the kbase articles. I would suggest that you totally remove all Apple software components and then re-install:
    http://support.apple.com/kb/HT1925
    Given that your issue followed a firmware update you may well need to Restore the iPod too:
    http://support.apple.com/kb/HT1414
    Let us know how you get on.
    mrtotes

  • Windows or itunes not detecting ipod touch

    my computer is not detecting my ipod, ive tried reinstalling itunes, restarting my computer and device and pretty much all of the troubleshooting solutions offered online but still it will not be detected, it has previously worked without fail its just in the last few days i have noticed it. the actual sync cable is fine and ive treid several.
    thanks

    - Have you tried everything here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    - Try anohter computer ot help determine if you have an iPod or computer problem
    - Make and appointment at the Genius Bar of an Apple store.

  • Itunes not detecting my ipod touch

    someone please help me out..hav got d latest version of itunes but still my touch is not getting detected..while installing latest itune software error comes as soon as d installation process begins saying "one more installation process is already running" n d options which come r "retry" n "cancel"
    if i click retry d itune gets installed but does not detect my ipod
    i tried to uninstall n reinstall it many times but was of no use...
    help me please...

    Have retried rebooting after uninstalling but before reinstalling. The error message indicates that something is still running that interferes with what you want to do.

  • IPod Touch 4G not detected in iTunes 10.0.1.22 when using Remote App 2.0

    I'm guessing Apple's Remote App 2.0 works well for iPhone 4 and iPad, but when I try using it with iPod Touch 4G, it does not show up in devices to enter the passcode.
    same wifi network
    iTunes 10.0.1.22, Home Sharing On, Library Sharing enabled, Looking for remotes enabled.
    iPod Touch 4G (iOS 4.1) (no problems with wifi)
    Apple's Remote App 2.0 Home Sharing login works well. Adding Library produces 4 digit passcode.
    BUT, again, it does not show up in Devices to have the opportunity to enter the passcode.
    iTunes is an approved app in firewall settings.
    Win 7 (32bit) Network Detection/Printer&File Sharing is enabled.
    Interesting:
    When I try to connect to Airport Express with my PC,
    I receive "unknown error (-15006)"
    Another iMac running iTunes 9 is able to stream music to the airport express without problem.
    Using my PC, I'm able to connect to the iMac, and stream music from the iMac to my PC.
    When Airport Utility (on PC) is open I can't detect Airport Express (even though the light is solid green.
    I'm still guessing iTunes 10.0.1.22 has AirPlay/AirTunes issues, and in general doesn't want to detect any wifi devices.
    I haven't yet looked up the error code, but would love to hear some thoughts out there.
    Anyone else have similar issues? Are there any fixes?
    Please share.
    Thanks.

    another piece of info about Remote App 2.0 on my iPod Touch 4G
    I'm able to turn on the Home Sharing button inside the app.
    The text description below it says:
    "Remote will automatically find the iTunes libraries and Apple TV's that have Home Sharing turned on using the account _____."
    Both my iTunes and this app have Home Sharing turned on and logged-in using the same account info, but Remote App is NOT automatically detecting my iTunes library. Nothing happens!! When I then click the "Add an iTunes Library" button, Remote app generates a 4-digit passcode number, but still won't detect my iTunes account. The same is true for iTunes; it will not detect my iPod Touch as a nearby wireless device on the same wifi network.
    I don't know how to move beyond this issue!
    Am I correct to assume that signing into my Home Sharing account on Remote App should automatically find my iTunes Library and populate the Remote App screen on my iPod Touch with a button/link to start navigating my iTunes Library, while at the same time iTunes should detect my iPod Touch in Devices and give me a screen to enter the passcode? Do I actually need a passcode if I'm using Home Sharing?
    I'm guessing that Home Sharing is for when I'm at my house, and a passcode is for when I'm at a friend's house. Could someone confirm if this is really the case?

  • Ipod touch not detect by pc or itunes but 2 other iphones are.

    My ipod touch isnt being detect by itunes or pc but my other 2 iphones are. I have reinstalled itunes and also hard booted the ipod. Is there anything else i can try? thanks

    - See if placing the iPod in recovry mode will allow iTunes to see the iPod so you can restore the iPod. For recovery mode:
    iPhone and iPod touch: Unable to update or restore
    - Last, make an appointment a the Genius Bar of an Apple store.

  • HT4623 I updated my Ipod touch 4th gen (IO6 or whatever its called) And it has the picture that says to connect my ipod to Itunes, and I did, now it says "ITunes has detected an Ipod in recovery mode. You must restore this Ipod before it can be used with

    I updated my Ipod touch 4th gen (IO6 or whatever its called) And it has the picture that says to connect my ipod to Itunes, and I did, now it says "ITunes has detected an Ipod in recovery mode. You must restore this Ipod before it can be used with ITunes." I just updated it and now I have to restore it??! I don't wanna lose all my things on my ipod just for a stupid update! Please someone help!

    Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766
    Note:
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download

  • IPod touch 2G not detected in iTunes 10.1.2.

    Hello,
    I have a Apple iPod touch 2nd Generation bought in 2009 running iOS 4.1.
    I'm currently running iTunes 10.1.2(x64) on Microsoft Windows 7 Ultimate(x64).
    Recently when I connected my iPod touch to my PC, it didn't got detected in iTunes but was seen connected in Windows Explorer.
    According to your support instructions on(http://support.apple.com/kb/TS1363?viewlocale=en_US), I tried everything but didn't got any help.
    Please help.

    The same is happening me.. here is the report.
    Microsoft Windows 7 Ultimate Edition (Build 7600)
    TOSHIBA Satellite L355
    iTunes 10.1.2.17
    QuickTime 7.6.9
    FairPlay 1.10.24
    Apple Application Support 1.4.1
    Biblioteca de actualización del iPod 10.0d2
    Controlador de CD 2.2.0.1
    DLL del controlador de CD 2.1.1.1
    Apple Mobile Device 3.3.1.3
    Apple Mobile Device Driver 1.52.0.0
    Bonjour 2.0.4.0 (214.3)
    Gracenote SDK 1.8.2.457
    Gracenote MusicID 1.8.2.89
    Gracenote Submit 1.8.2.123
    Gracenote DSP 1.8.2.34
    Número de serie de iTunes 43BA2EADEC61017A
    El usuario actual no es un administrador.
    La fecha y hora local actual es 2011-03-03 13:37:57.
    iTunes no se está ejecutando en modo seguro.
    La composición acelerada de WebKit está activada.
    Compatible con HDCP.
    Compatible con Core Media.
    Información de pantalla de vídeo
    Intel Corporation, Familia Mobile Intel(R) 965 Express Chipset (Microsoft Corporation - WDDM 1.1)
    Intel Corporation, Familia Mobile Intel(R) 965 Express Chipset (Microsoft Corporation - WDDM 1.1)
    ** Información de complementos externos **
    No hay complementos externos instalados.
    ** Pruebas de conectividad del dispositivo **
    iPodService 10.1.2.17 se está ejecutando en estos momentos.
    iTunesHelper 10.1.2.17 se está ejecutando en estos momentos.
    Apple Mobile Device service 3.3.0.0 se está ejecutando en estos momentos.
    Controladores de bus serie universal:
    Controladora de host universal USB de la familia Intel(R) ICH8 - 2830. El dispositivo funciona correctamente.
    Controlador de host universal USB de la familia Intel(R) ICH8 - 2831. El dispositivo funciona correctamente.
    Controlador de host universal USB de la familia Intel(R) ICH8 - 2832. El dispositivo funciona correctamente.
    Controlador de host universal USB de la familia Intel(R) ICH8 - 2834. El dispositivo funciona correctamente.
    Controlador de host universal USB de la familia Intel(R) ICH8 - 2835. El dispositivo funciona correctamente.
    Controlador de host mejorado USB2 de la familia Intel(R) ICH8 - 2836. El dispositivo funciona correctamente.
    Controlador de host mejorado USB2 de la familia Intel(R) ICH8 - 283A. El dispositivo funciona correctamente.
    No se ha encontrado ningún controlador de host FireWire (IEEE 1394).
    ** Pruebas de sincronización del dispositivo **
    No se ha encontrado ningún iPod, iPhone o iPad.

Maybe you are looking for

  • Itunes no longer play or import music CD's, on my PC - MS Media Plyr does

    Help, my PC was able to import music before to itunes but no-longer does. When I start-up my PC with Music CDs in both CD drives - computer asks what I want as default music player and I select itunes. CD DIAGNOSTICS: Microsoft Windows XP Professiona

  • Strange behaviour CAP1602

    Hi, I am installing the new CAP1602 AP´s  aon my customers network and are seeing a strange thing. First, some basic information. Customer is using Cisco Prime Infrastruture 1.3 and I have created a few templates for provisioning. My customer has two

  • Error showing on the Event Viewer

    Hello, I have installed the Oracle9iAS at win2k SP3, i have this error when i reboot my server where this showing in the event viewer log. The OracleOra9ias_homeWebCache service hung on starting. But when i go to the services, it show this service st

  • Adding functionality to the pushbuttons in selection screen

    Hi, Where to add the logic to the pushbutton in the selection screen.In the PBO or PAI of that screen.If possible can anyone send an example for that?

  • Urgent - STO - Third Party Carrier ex: FedEx / UPS - Outbound Delivery

    Hi Gurus, I am working on an issue in which when an UB/UD order type STO is created, the Third Party shipping-Carrier info. ex: FedEx 1 day, 2 days, 5 days / UPS 1 day, 2 days, 5 days, etc., is entered in the Partner Tab. This needs to be pulled into