Mi mac book pro is too slow what can I do?
My Macbookpro is too slw what can I do?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Similar Messages
-
My mac book pro is not starting what can i do?
My mac book pro is staring but has a gray icon and does not boot up, what can i do?
That's a esy fix, usually it's caused by a outdated or incompatible at boot kernel extension file installed by a third party program.
You can hold the shift key down on a wired or built in keyboard while booting for "Safe Mode" to disable these bootup kernel extension files, then go around and update all your third party software then reboot.
Another method is to hold option key down while booting (if on 10.6 with the disk in) and boot off the 10.6 disk, or into 10.7-10.8 Recovery HD partition and reinstall OS X over itself, reboot then Software Update until clear.
That will clear out all and give a fresh OS X copy in the process, but doesn't touch your programs or files.
Read more in detail here
..Step by Step to fix your Mac -
My mac book pro is stolen. What can i do?
My macbook pro is stolen. What can i do? Is a mac pro traceable? Are you assurd against theft?
Plz help.Sorry to hear about your Macbook, You should contact the police and may a report. The MacBook is not traceable unless you have some type of software installed that can perform a trace. You should change all of your password for items that they may have access to i.e. iTunes as soon as possible.
-
My mac book pro runs so slow and little round rainbow keep popping up
My mac book pro runs very slow and little round rainbow keeps popping up
First, back up all data immediately, as your boot drive might be failing.
Step 1
This diagnostic procedure will query the system log for messages that may indicate a hardware fault. It changes nothing, and therefore will not, in itself, solve your problem.
If you have more than one user account, these instructions must be carried out as an administrator. I've tested them only with the Safari web browser. If you use another browser, they may not work as described.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|nspace-h|n Cause: -' | tail | open -ef
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
Step 2
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
Step 3
When you notice the problem, launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 4
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long. -
My Mac Book Pro was really slow at everything and would kick me out of my photos every time i got on them. now it won't even allow me to log on. i put my password in and the screen will flash white and go back to the login page. HELP please...
There is nothing wrong with your Dell, it will work fine with any MacbookPro. I have been using Dell displays for over 12 years with many different Mac models. I have two 21" Ultra Sharp displays working side by side to design a Keynote presentation right now.
The issue your having is with the way Keynote takes control of the video output to both displays, it sends the presentation signal to one and the presenter display to the other, this is set up in;
Keynote preferences > Presenter display.
If you want to show a wesite or another app on either display, use application switcher:
press the the command key on the keyboard, then the tab key; a row of applications will show what applications are running, choose which one you want to show. Use command > tab to return to Keynote. -
How do I fix my mac book Pro from running slow?
How do I fix my mac book Pro from running slow?
Why is my computer slow?
Step by Step to fix your Mac -
Can I interrupt a migration from Mac Book Pro to Imac and what are the consequences
can I interrupt a migration from Mac Book Pro to iMac and what are the consequences
Les:
Here are some options:
• You could copy the data file to your laptop, work on it, and update the file on the iMac when you are back.
• You can use an application like Log Me In to access your home computer from your laptop.
• You can use DropBox. Install it on both computers, place your data file in a folder on the iMac, access it and work on it on your laptop and it will be automatically updated on your computer at home, even if it is not turned on, as soon as it is connected to the internet.
Please do post back with further questions or comments.
cornelius -
90% space is empty in my mac book pro still working slow unable to work properly....
my mac book pro is working slower and i am unable to do any wprk in it... its more than 90% space is empty.
Back up all data immediately as your boot drive may be failing.
If you have more than one user account, these instructions must be carried out as an administrator.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|Previous Sh' | tail | open -ef
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that. -
my boyfriend wants to play is mac book pro through our television. what do we need? i want to get this for him for x-mas
MiniDisplayPort-to-? adapter, available at Apple stores and Best Buy and antplace selling Apple. Plugs into the Thunderbolt or "lightning bolt" port.
Replace ? with HDMI or VGA or DVI.
Know that TVs spave pixels further apart, for viewing at 10-15 ft instead of close as monitors do. Makes viewing small text at 10 ft difficult sometimes.
Another poster also recently reported that using the mouse on the external display is "laggy". Some models of Mac have only a graphics card integrated into the CPU (which can be challenged by running a big external TV) and some have a "discrete" or "second" graphics card that handles TVs better. -
All my Photos disappeared after I saved a photo to Iphoto from an email from my wife. I am running Mountain lion on Mac book pro 2012, help. What did I do wrong?
Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
My 4yr old mac book pro is running slow. Any suggestions?
My 4yr old mac book pro is running slow. Any suggestions?
Examine these articles for possible solutions;
https://discussions.apple.com/docs/DOC-3521
https://discussions.apple.com/docs/DOC-3353
You should find them excellent for troubleshooting.
Ciao. -
I already bought mac book pro last year but it can't view windows just like mac pro for education. I want to make like mac pro for education How?
First, if you have a MACBOOK PRO (a laptop), you should post in that forum. MAC PRO (desktop) and Macbook Pro are different things, so when you use those terms interchangeably, it's impossible to know what you're talking about.
Second, even guessing that you have a laptop, I still have no idea what your question means. Are you trying to load Microsoft Windows on it? Every Mac can run Windows using either Boot Camp or Parallels/Fusion/VMWare solutions. Please explain in more detail what you're trying to do, and we'll try to help. But post in the Macbook Pro forum if you're talking about a laptop.
Matt -
I need a link to buy online battery for Mac Book Pro 15" late 2008. Can't find this battery in the Apple Store...Battery: Model No. A1281 10.8 V 50 Wh.
The only place that you can get an Apple battery is from Apple. All of the counterfeiter's will claim that they have an OEM battery for the simple reason so that they can fool you in purchasing from them.
At least from OWC you know exactly what you will be purchasing and they have a one year warranty. I have purchased two from them, one for my 2006 MBP and one for my 2010 MBP.
Ciao. -
I am getting no signal to my dj mixer using m-audio firewire audiophile sound card connected to my mac book pro using Traktor Dj software can anyone help?
The firewire port reads the dj software and I can hear music playing through the sound card when I plug my headphones into it but there is no signal to the hardware (my dj mixer).
I have reset the firewire by turning off my mac book pro for a few hours and can see the sound card device in the fire wire section after clicking on the apple icon on the top left corner of my mac.
My dj mixer works on another mac computer with the same soundcard and different firewire cable.
Hope someone can help
Thanks
Waynekmiddlet88,
yes, it could be due to nearly anything listed in your kernel extensions, startup items, launch daemons, launch agents, or user items above. Please check all of your installed third-party software to make sure that the versions which are installed on your MacBook Pro are compatible with Mavericks; uninstall every software package which isn’t Mavericks-compatible. After you’ve done that, boot into Safe mode, and see if you still get the beach ball of doom there. If it doesn’t appear there, restart normally and see if it appears then. -
My macbook pro is very slow. what can i do?
my macbook pro is very slow. what can i do?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Maybe you are looking for
-
Ctrl+Tab and Ctrl+F6 still not working in Excel 2013?
I am using Windows 7 64-bit. I just switched to Office Home & Business 2013 (32-bit), and I discovered that ctrl+tab behavior in Excel 2013 is incredibly broken. If you are using any other programs concurrently with Excel, then it makes switching tas
-
ORA-20001 FLEX-ID DOES NOT EXIST
Hi Experts, Please am having this issue when running create Grade api for HCM of Oracle EBS. When i execute this script below to existing Business Group( Vision University 1759 or Vision Corporation 202 ) data is transferred to per_grades and per_gra
-
Javascript is not working in Safari on my iPad, version 6.1.3. Anyone know why?
I have an iPad with os version 6.1.3. Javascript on websites is not working in Safari. Does anyone know why? How can I correct this situation?
-
Itunes can't talk to ipod - PC Format
I recently purchased a used iPod (it was bought new in 4/05). My son also has an ipod. We wanted to have separate content on each ipod so I set up different accounts on our PC. My son's ipod has never had problems connecting to iTunes. When I connect
-
Calls failing to connect due to "Internal Error"
I have been having issues, with increasing frequency, with Skype on my Mac as well as iPhone. Now EVERY time I try to call a phone number it gives the notification of "Call ended - internal error". What the **bleep**?