MI Server Installation Problem while installing MAX DB
Dear All,
As a part of installing MI Server, I am getting the following error while installing MAXDB.
The dbmcli call for action ACTIVATE failed.
-24988,ERR_SQL: Sql error
-2014,Identifier too long
Could anyone of you let me know the solution if you know it.
Thanks and regards,
Kishore.
Hi Kishore,
-24988: ERR_SQL - sql error:
An error occurred when a command was issued to the database kernel.
For this If necessary, consult the other database-kernel error message and correct your entries accordingly.
If the error occurs in the Database Manager GUI and there is no way in which you can correct it, please contact your local support organization.
2014: Identifier too long
The specified identifier is too long for the SQLMODE used.
Pay attention to the restrictions in the table when specifying the identifier.
SQLMODE- Length of identifier
ANSI - 18 characters maximum
DB2 - 18 characters maximum
ORACLE - 30 characters maximum
INTERNAL - 32 characters maximum
I never did this myself though, hope you find these links usefulhttps://www.sdn.sap.com/irj/sdn/go/portal/prtroot/com.sap.km.cm.docs/library/mobile/mobile%20infrastructure/best%20practices%20for%20sap%20mobile%20engine%202.5/bblibrary/documentation/mi25_installation_guide.pdf
watch this tread which has a prob smilar to that of yours
Forum: Expert Forums » Community Discussions » Trials, Previews & Other Downloads
sub: NW04s ABAP installation failed at phase 11 of 24
thread:
and this one too:
Hope you solve your issue soon,
Regards
Divya
Similar Messages
-
Oracle Installer Problem while installing Oracle 9i on HP Unix
Hi Everyone ,
I had earlier installed 9.2.0.1 on Linux and had no probs whatsoever . When i am trying to install Oracle 9.2.0.1 on HP Unix , the Oracle Installer opens up a window saying CHOOSE JDK HOME DIRECTORY . I have already set the PATH environment variable to point to /opt/java1.4 and /opt/java1.4/jre/bin and also JAVA_HOME to point to /opt/java1.4 . Even after trying to put the directory information it refuses to go thru giving the Error INVALID JDK HOME.PLEASE ENTER CORRECT JDK LOCATION.
Any replies would be greatly appreciated
Thanks
RaviThis could be due to you have multiple JDK homes like java1.4 and java1.3. Instead of type JDK home in the windows box, try to browse and select the JDK home and try it. Otherwise, if you have multiple JDK homes, then try to remove one of them.
-
Sapinst: installation problem while installing ERP
Hi,
SAP SOLUTION MANAGER 4.0 SR3
SAP ERP 2005 SR2:
OS: Linux RHEL 5 (64bits)
DB: MAXDB
Hello,
after having installed SAP Solution Manager successfully, I'm trying to run sapinst ERP.
Sapinst hangs at phase 11 (Create database instance) after phase 10 (Remove database instance).
Last entry in sapinst.log:
INFO 2008-04-07 14:23:41
Account sqddb1 already exists.
ERROR 2008-04-07 14:23:41
The dbmcli call for action PARAM_INIT_INST failed. Check the logfile XCMDOUT.LOG.
Last entries in XCMDOUT.LOG:
> Subprocess starts at 20080407142311
Execute Command : /sapdb/programs/bin/dbmcli -s -d DB1 -u CONTROL,********
Start subprocess as user with uid: root
Execute Session Command : db_offline
Execute Session Command : db_drop
Execute Session Command : exit
> Subprocess stops at 20080407142335
OK
OK
> Subprocess starts at 20080407142338
Execute Command : /sapdb/programs/bin/dbmcli -n saprcon inst_enum
Start subprocess as user with uid: root
> Subprocess stops at 20080407142338
OK
7.6.00.35 /sapdb/DB1/db
> Subprocess starts at 20080407142341
Execute Command : /sapdb/programs/bin/dbmcli -n saprcon -d DB1 -u CONTROL,********
Start subprocess as user with uid: root
Execute Session Command : param_startsession
> Subprocess stops at 20080407142341
Error! Connection failed to node saprcon for database DB1:
database not found
What can I do?
Thank you in advance
Wilhelm
Edited by: Wilhelm Kessler on Apr 7, 2008 5:12 PMThank you Juan,
sapinst Component Installation Guide requires logging in as root.
Nevertheless I have tried to run sapinst as <sid>adm, but the job crashed at the beginning.
Wilhelm -
Re: problem while installing WEB-enyterprise
Ciao Rajeev
It looks like you don't have the http directory under your active
environment.
Did you copy the http structure from '$FORTE_ROOT/appdist/webenv' to
'$FORTE_ROOT/appdist/WhateverYourEnvironment' ?
peace
Claudio
-----Original Message-----
From: Rajiv Srivastava <[email protected]>
To: [email protected] <[email protected]>
Date: Tuesday, January 19, 1999 8:48 PM
Subject: problem while installing WEB-enyterprise
while running escript to install HTTP library on my machine(WINNT server)
i am getting a error -
system Error : There are no distributions available for the application
HTTP
can anybody help.
rajeev
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>Hi Starmgmjo,
Thanks for posting you issue. Kindly browse the below mentioned URLs to install SharePoint 2013 Step by Step
http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server
http://sharepoint-community.net/profiles/blogs/configured-domain-services-controller-and-create-users-and-groups
http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server-1
http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server-2
http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server-3
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh -
Problem while installing SAP netweaver developer workplace
hi,
I hav a problem while installing SAP netweaver developer workplace .An error has occured while processing service ´developer workplace installation´.This error occured in phase 14 of 25 ie while unpacking SCS Client.error is as follows:-
[Cannot connect to host uklonki1 Connection refused: connect, -813.]
the database is online and the x-server is also started.hope anyone can help me in this problem.
with regards,
JaisammaHi Michael,
I have tried that, but the result remains the same.
Manish -
Problem while installing CS6, Please Help
Hello everyone, I almost search every help available around the internet for my problem and can't figure that out. Hope you guys might had better knowledge about that. I am facing a problem while installing Photoshop CS6 version and I already deleted my previous version and I am receiving the pop of "LOW COMPATIBILITY". Please tell me what might be the problems and the way to get out of this situation so that I can continue doing work for my deals site dealaboo.
Hi,
Please share your system configuration on which you are trying to install Ps CS6.
Regards,
Ashutosh
Ps Installer QE -
Installation error while installing SAP NetWeaver ABAP Trial Verion 7.02
Hello,
I am getting the following installation error while installing SAP NetWeaver ABAP Trial Version 7.02 (90 days evaluation)
An error occurred while processing option SAP NetWeaver 7.0 including Enhancement Package 2 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step :The database installer reported an error. DIAGNOSIS: Some database applications might still be running. SOLUTION: Check the log file sdbinst.log and C:\sapdb\data\wrk\MaxDBRuntimeForSAPAS_install_ _ .log.). You can now:
Choose Retry to repeat the current step.
Choose Log Files to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL.
Below are the details of my system:
OS: Windows 7 Enterprise Edition (version 6.1.7600)
Processor: Intel(R) Core(TM) i5
System: 64-bit Operating System
Regards,
Tarunhello,
I am getting the below error while intsatlling
An error occurred while processing option SAP NetWeaver 7.0 including Enhancement Package 2 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step :Creating node $(DIR_TRANS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed: Unable to create node
cyber7be\sapmnt\ with type DIRECTORY: can't create parent node...). You can now:
Choose Retry to repeat the current step.
Choose View Log to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/.
os--windows xp-sp3. 32 bit
please help
thanks in advance
Edited by: sumzi_ks on Aug 27, 2011 4:09 AM -
A problem while installing webdynpro
Hi all:
there is a problem while installing webdynpro:
The SAP NetWeaver Developer Studio 7.0.17 Setup has not successfully installed all selected components on your computer, either because a component could not be installed or the process has been aborted.
Click Finish to exit the wizard. For detailed error descriptions, please open file://D:\nwds\NWDS\NWDS\J2EE-R~1\IDE\setup\saplogvw.exe .
The following program files could not be registered:
c:\windows\system32\librfc32.dll
The installed applications may not function correctly until all program files are successfully installed.
Could you please tell me how to solve it ?Hi
Please have a look on these similar thread
1.[Problem in installation SAP Netweaver 2004s |Problem in installation SAP Netweaver 2004s;
2.[Installation error during installing SAP NetWeaver developer studio|Installation error during installing SAP NetWeaver developer studio 7.0.11;
Best Regards
Satish Kumar -
ages is taking annoyingly long to download and install. Any of you faced similar problems while installing it?
Who knows what "ages" means to you, or what speed Internet connection you have, or what else is happening on your computer or network.
Pages/iWork are not small so it can take a while. Sometimes heavy demand at the Apple end can slow their server as well.
Peter -
Problem while installing NWSneakPreviewSP11
Hi All,
I am facing a problem while installing NWSneakPreviewSP11.In installation 29 phases available.
It complete 17 phases successfully but get stuck at 18 phase.
The 18 phase is "Load java DataBase Content" and At status bar it's showing Info:"EP_LOCK_APPLS loaded" message.I have seen view Log also this is not showing any error Message.
What could be the possible reason to get stuck installation ....?
Plz tell me how can i resolve this problem.
Arun SharmaSome of the reasons could be:
1. You do not have sufficient DB Space
2. If it is SP11, you did not set your system Timezone to "Amsterdam, Berlin..." which is +1 GMT
3. You might be using JDK other than 1.4.2_08 (this problem was reported when 1.4.2_10 was used)
HTH
Venkat -
I am facing problem while installing iTunes
I am facing problem while installing iTunes with this error
"There is problem with you installer package. A program required for this install to complete could not be run."Hi Owen,
I have tried .net Package & Deployment as well as InstallShield 2008. finally i have tried B1DE also. B1DE gives us template only in vb.net but not in C#.net and i want this in c#.net.
I was trying to understand the code that it creates. I won't be able get the code also.
I would like to go from other way apart from B1DE.
Need Urgent Help... -
Hyperion essbase server installation problem
I had a problem while installing hyperion essbase. In the essbase server, I entered a username and while doing administrative configuration utility, I was asked to enter these details and when I entered it says that the information was incorrect. I tried several times but it was locked I guess. So, please help me how to change the user name and the pass word in the essbase server so that I can run the configuration utility with no problems?
Thanks in advance
TejaswaniYou might get a better/faster response in the Hyperion forum at Hyperion EPM
Srini -
Problem while installing solaris 10 on HP proliant DL 380 G5.
Hi,
facing problem while installing solaris 10 05/09 on HP proliant DL 380G5. The array controller is E200.
i have installed the raid controller driver CPQary3-2.1.0-solaris10-i386, it is going ahead but not detecting the whole hard disk space. My hard disk space is SAS 146GB. There are two 146GB hard disk present. It is showing only 978 MB & only one hard disk. So please help me out. my mail ID is [email protected]I have a similar issue trying to load Solaris 10u4 on an IBM x236.
I had to put in a recognized SCSI card, attach an external array to the card, and install Solaris 10u4 on the array. Then I had to install the correct driver from OpenSolaris (an Adaptec one for IBM ServeRAID), and do a live upgrade onto the now-visible internal disks. Then I removed the array and cleaned up the traces from the live upgrade.
You may have to do something similar.
And last month the boot drive got corrupted when power was interrupted. "Oops. Wrong plugs..." This time the external array will stay connected. -
Getting problem while installing Snow Leopard (10.6.3) on my Mac Mini. The following issue is showing :
"mac os x snow leopard cannot be installed on this computer"
And My Mac Configuration details: Model Name: Mac Mini Model Identifier: Macmini2,1
Intel Core 2 Duo
1.83Ghz
l2Cache: 2mb
Memory : 2GB
Bus Speed: 667MHz
Please help me......
ThanksActually i have Mac OS X 10.5.4 DVD, I need to upgrade it to Snow Loepard(OS X 10.6)...
Please suggest me what to do???
Thanks -
Have a problem while installing Asmlib packages
hi all
I have some problem while installing ASMlib packages.
my OS=Redhat linux 5.3
kenel version using this command uname -r=2.6.18-128.el5
I have downloaded packages and successfully installed following 4
oracleasm-support-2.1.7-1.el5.i386.rpm
oracleasmlib-2.0.4-1.el5.i386.rpm
oracleasm-2.6.18-128.el5-2.0.5-1.el5.i686.rpm
oracleasm-2.6.18-128.el5-debuginfo-2.0.5-1.el5.i686.rpm
but while installing following got error
rpm -ivh oracleasm-2.6.18-128.el5debug-2.0.5-1.el5.i686.rpm
kernel-debug = 2.6.18-128.el5 is needed by oracleasm-2.6.18-128.el5debug-2.0.5-1.el5.i686
rpm -ivh oracleasm-2.6.18-128.el5PAE-2.0.5-1.el5.i686.rpm
kernel-PAE = 2.6.18-128.el5 is needed by oracleasm-2.6.18-128.el5PAE-2.0.5-1.el5.i686
rpm -ivh oracleasm-2.6.18-128.el5xen-2.0.5-1.el5.i686.rpm
kernel-xen = 2.6.18-128.el5 is needed by oracleasm-2.6.18-128.el5xen-2.0.5-1.el5.i686
thanx in advanceI think you just need below rpms to configure asmlib:
oracleasm-support-2.1.7-1.el5.i386.rpm
oracleasmlib-2.0.4-1.el5.i386.rpm
oracleasm-2.6.18-128.el5-2.0.5-1.el5.i686.rpm
Read this thread:
Error install ASMLib on RedHat linux
Maybe you are looking for
-
I get an error from iTunes saying it cant recognize the "iPhone"
I just upgraded to itunes 7.6.0.29, after that got a pop up with a message from iTunes saying it cant recognize the "iPhone" and to detach it and try again. Just for verification uninstalled 7.6 and reinstalled 7.5. The problem went away. Then upgrad
-
Itunes is not recognizing my Ipod Touch. I am thinking my computer is recognizing it as a camera. Any ideas on correcting this.
-
Photoshop elements shuts down 'the application has requested the runtime to terminate it in on unusu
The photoshop elements starts opening then the message appear: 'The application has requested the runtime to terminate in on unusal way' and the photoshop elements shuts down
-
Object Tables and Relational Tables
the statement below are they true for both Object and Relational tables? Rows are stored in extents can rows can be made up of one column collection types can be used in a column Thanks!
-
Hello experts How can I get access to formated search form? How to return its marix values (it returns 3 values)? I can choose forms uniqal ID, but how can I get a specific row from it? Or how can I display the list of indexes after puttin "*" in the