MI31, Include Previous Inventoried batches Flag, WHY only for current year

Hello All,
We are using MI31 to generate Physical Inventory documents and our need is to always generate PI for batches having Stock but Not to Generate PI for Batches which have Stock 0 and are already counted(posted) atleast Once.
Means if a batch has 0 stock today, we did an inventory count now and post successfully, Now for future we DON'T WANT TO COUNT THIS BATCH ANYMORE.
We though of achieving this by running MI31 two times, once for batches with non-zero stock and second time for batches with zero stock.
So, first time, with Flags "Only Mat without zero stock" and "Incl Batches subj to PhyInv", so that everytime PI is created.
Second time, with Flag "Only Mat with zero stock" and WITHOUT marking flag "Incl Batches subj to PhyInv", so that a new PI doc is created only if there is no doc created earlier for this batch. This is working well but only wrt to CURRENT YEAR. If there is a PI doc for this batch which is processed last year, then again a new doc is created if I run this year which is NOT NEEDED.
Is there any other customisation/setting/way to avoid these extra documents ?? We don't want to print PI this year for batches with zero stock which are already processed in 2010 (or earlier) and want to ignore them permanently.
I hope I am clear in my query.
Regards,
Diwakar

Thanks for the reply Jurgen.
Yes, Archiving is one option but not sure would be agreed, I will discuss the pros n cons for it.
if you dont want to count zero stock batches, then click the button "Acc.to Stock " in the middle of the selection screen and activate the box for only material without zero stock
This will NOT ensure that 0 stock batches are counted at least ONCE which is the requirement. Therefore I am thinking for running them separately.
Anyhow, it means there is NO solution to IGNORE 0 qty batches which are already counted atleast Once (in previous years) :(
Can you think of any other workaround to achieve the same (other than archiving) ?
I guess we can mark them deleted and then play with the deletion flag indicator in this program.

Similar Messages

Why only for me my webpage is little bit broken?

Why only for me my webpage is little bit broken not showing correctly? With other browsers is OK, but then i using Firefox 4+ version it's little bit broken, my friends using same browser like me, but for they website looking good. Please help me, because i don't like use old firefox versions :/
You can see how for me it look's: http://img818.imageshack.us/img818/8585/unledal.jpg At normally the text from panel's should little bit exposed from panel.

Fix your coding so your web pages are displayed in "standards mode" rather then the "quirks mode". The problem with the quirks mode is that it forces Firefox to guess your intentions about how something is to be displayed, when your friends view that page Firefox guesses right, but for you Firefox is guessing wrong. Eliminate the "guess" factor and Firefox should display your web page the same for all users. <br />
http://en.wikipedia.org/wiki/Quirks_Mode
Plus, once you fix the code, maybe you can get rid of that NO IE logo that appears when someone uses IE to view that page. Times are changing, IE 8 and even more so IE9, can display web pages almost as good as Firefox, Opera, and Chrome, and if not the web page is more than likely at fault.

Parameter for current year and previous year

Hi all,
I currently have 2 reports where the query is the same except in the where clause I have it filtered to current year and previous year based on the List_Date. I would like to make this one report with a parameter of Current or Previous year.
Would I create 2 more datasets one for current and another for previous? I would think there is a easier way. Any help or direction would be great.

If you define a parameter in SSRS, you can use it's value in your query. Just make sure the parameter name, and CASE (SSRS is case sensitive when it comes to parameters) are the same in SSRS and your query. There's a parameter tab on the dataset properties.
It SHOULD auto fill, but it never hurts to check, just in case.
Don't forget to mark helpful posts, and answers. It helps others to find relevant posts to the same question.
Yes it did auto fill the parameter tab in the dataset and I get a parameter to enter the year when I preview the report. Still a little confused on how I do current or previous year. Are the next steps what I need to do?
@yearParam parameter:
1) Create Available or Default values
2) Current and Previous year as label
3) For Value do I need to use a expression for current year =Year(now()) and previous Year?
4) Add a filter on the tablix for list_date?

Power View in SharePoint only shows current year.

I have a customer using the Power View add in for SharePoint 2013 based on SQL 2014. I have created a BISM object that connects directly to an OLAP cube.
When I build reports or Pivot tables against this object they work fine. However when I build dashboards in Power View they only show the current year's data
We do have a default date dimension which forces for some reason Power View to only display current year. Therefore the slider doesn’t work since it has only current year / date showing up.
After removing the date dimension in one of our dev. cubes, Power View showed all dates and we were even able to uses the date animation with slider worked fine.
We don't want to do this in production however, because many of our reports rely on the default date dimension.
Has anyone come across this or know a workaround?
SG

I am going nuts! I had selected 'Analysis Services' instead of 'Microsoft BI Semantic Model for Power View'

How to modified automatic batch number with plant and current year details

hi all,
i want tomodify automatic batch number with plant and current year details. if any one understand plz explain.
thanks,
radhakrishna.

Hi,
I am not clear what is u r requirement exactly?
I mean you don't want automatic batch no or modify the batch no. with plant means and Current year details means. Can give details more
Regards
Ganesh

My computer is a few years old and I understand the One to One membership is only for 1 year. Are there annoy other support options I can purchase?

My computer is a few years old and my suppost One to One membership is only for 1 year from purchace. Are there any other suppost memberships available for purchase?

Do you mean physical support for repairs, or just advice? The latter is available free of charge on these forums as well as in Apple Stores.
Apple Support Options:
http://support.apple.com/kb/HT2046?viewlocale=en_US

SQL Server 2012 Cumulative update package 2 (CU2) for SQL Server 2012 Service Pack 2 - why only for x86 ?

Hey guys...
Im a little bit confused... i wanted to download the newest hotfixes for SQL server 2012...
But the download for :
2983175 Cumulative update package 2 (CU2) for SQL Server 2012 Service Pack
is only for the platform: x86 available ... but my SQL server 2012 is running in a x64 environment...
(when i checked the older cumulative updates... they're all only for x86.. can someone tell me why ? )
thanks and regards,
Dominic

There doesn't exist an SQL Express "Standard". It's two different editions.
For Express there are three 32bit/64bit editions:
Express, Express with Tools and Express with Advanced Services.
Express with Tools is essentially Express with Management Studio Tools, Express with Advanced Services adds also BI (Business Intelligence) + Reporting Services.
As for where you can apply the cumulative update, on the link you can see this:
Microsoft SQL Server 2012 Service Pack 2, when used with:
Microsoft SQL Server 2012 Analysis Services
Microsoft SQL Server 2012 Developer
Microsoft SQL Server 2012 Enterprise
Microsoft SQL Server 2012 Express
Microsoft SQL Server 2012 Business Intelligence
Microsoft SQL Server 2012 Standard
Microsoft SQL Server 2012 Web
"If there's nothing wrong with me, maybe there's something wrong with the universe!"

Why only for ios?

I want to download the phone apps but they are only for ios! Why? Will it be available for Android in the future?

i think so, cause now you can run CC even if just for review in android..you also can use lightroom for android.
but if adobe touch realized with windows it kill many device

How do I keep a page as my home page when dragging icon to left of URL to house image & confirming that I want it as home page works only for current session, so when Firefox next opened, I end up with some stupid search page which McAfee doesn't like?

A couple of days ago, I connected to the Internet as usual & opened Firefox, only to be greeted by an almost blank screen with a Google-type search box in the middle & this message from McAfee:
"Your default search settings have changed. This may pose a security risk. Would you like to restore them to McAfee Secure Search to provide a safer searching experience?"
instead of my usual home page (BT Yahoo). I naturally clicked on the "Yes" option in the message, but rather than restoring my BT Yahoo home page, all that did was to insert the McAfee logo to the left of the search box in the top right-hand corner of the screen. The first time it happened, I had to search for the BT Yahoo page & then followed the standard procedure for setting it again as my home page. It worked only for that session: each time I shut down Firefox or restarted my computer after that, all I got was the blank "search page" & restoring the previous session was the only way to get back to BY Yahoo. How on earth do I make the home page setting permanent?
As far as I'm aware, I have done nothing to alter my search settings. However, I am anything but computer-literate, so I may have done/pressed something without realising it, but trying to understand what is now happening is far beyond my limited IT skills.

See McAfee support to find out how to disable that McAfee feature - that isn't part of the normal Firefox installation.

Drill down by customer only for 1 year (only total then) in query designer

Hello experts,
I face a need I don't manage to fit with the query designer. It sounds easy, but I didn't find solution after few trials.
The target report has to look like that :
       01.2010   02.2010   03.2010   04.2010   u2026   12.2010   Total
Customer
cust 1        ratio          ratio         ratio          ratio    ratio     ratio     Total
cust 2        ratio          ratio         ratio          ratio    ratio     ratio     Total
cust 3        ratio          ratio         ratio          ratio    ratio     ratio     Total
cust 4        ratio          ratio         ratio          ratio    ratio     ratio     Total
cust 5        ratio          ratio         ratio          ratio    ratio     ratio     Total
cust 6        ratio          ratio         ratio          ratio    ratio     ratio     Total
Year 2010   total          total          total          total    total      total      total
     2009      total           total          total          total    total      total      total
     2008      total           total          total          total    total      total      total
     2007      total           total          total          total    total      total      total
The particular point disturbing me is to display detailled ratio according to customer caractéristique ONLY for the current year (2010) and ONLY TOTAL for past years.
Thanks in advance for help, points will be awarded.
Guillaume

Hi Petiaux,
All the replies have been correct & all you need to do is a combination of a few. A step-by-step approach for your report, I'll explain in detail, and please correct me if I'm wrong.
01.2010 02.2010 03.2010 04.2010 u2026 12.2010 Total
Customer
cust 1 ratio ratio ratio ratio ratio ratio Total
cust 2 ratio ratio ratio ratio ratio ratio Total
cust 3 ratio ratio ratio ratio ratio ratio Total
cust 4 ratio ratio ratio ratio ratio ratio Total
cust 5 ratio ratio ratio ratio ratio ratio Total
cust 6 ratio ratio ratio ratio ratio ratio Total
Year 2010 total total total total total total total
So, the above is the first set of details you need to make. Follow up by using offsets for 1 variable followed up till the 12th month. Create a variable for 0CALMONTH (Cal Yr-Month) in a selection. Follow up by copying this variable 12 times, changing the offset of the input varaible to +1, +2, etc..
Now for the next set as below, there are 2 approaches.
2009 total total total total total total total
2008 total total total total total total total
2007 total total total total total total total
1. If you are using i/p variable as Cal-Month, then its best you can approach to find the differences by making a selection for the same variable in a range like New Var (EnterMonth -12 : Enter Month -23 ). Same fashion, approach to calculate (EnterMonth - 24 : EnterMonth-35) etc. But limitations are there for this approach, as you need to select ranges & with each year you need to update the query.
2. Use CELL Editor: At the top of the icon tray, you can notice a 'cell' symbol, wherein you can find the cell editor. Under the 2009, 2008, 2007 headings you can choose to create a selection with following restrictions: 0CALYEAR (Cal Year) as varaible. But the only thing here is the input variable for this query must be 2 seperate variables > One CALYEAR & another CALMONTH. So this is another approach, where user will have option to enter cal month & cal year seperately in 2 different text input boxes.
3. Perform the calculation for 2010. Copy the same for 2009,2008,2007 etc with offsets. You can try hiding the rest of the month feilds, after calculating the total for all months of the years in 2009,2008 etc using offsets. Although it sounds crazy idea, but sometimes if customers require such an output we need to do something crazy though. I hope it might work, but as stated its the last option if nothing works out.

Why only for my PayPal website does Firefox render a glitched page?

I use PayPal for many of my online purchases. While I have been able to open my PayPal website, it displays as text only in a column on the left side of my screen. This display is not user friendly. This is the only website that this happens on; all my other secure sites open and display just fine. What's the problem with PayPal not working on Firefox? I can go to Chrome and the website opens just fine but that's a bit inconvenient since I'm vested in Firefox. Could I have something set wrong in my Tools and Options or is this strictly a Firefox problem? Help!

To jscher: Yep, it shows all that. And to my recollection, I've never set up any exceptions.
To cor-el: I saw nothing in that area concerning CSS content at all.
Does solving this problem seem a little more complex than it should be? :-)

Load data only for current month using ABAP Routine

Hi Everyone,
I am loading data from R/3 using the 0HR_PA_OS_1 extractor. This requirement is to load the position numbers from R/3. Using the extractor for a given position 28 I get the following dataset results.
CALMONTH POSITION
11-2004           28
12-2004           28
01-2005           28
02-2005           28
      |
07-2007          28     CURRENT DATE
Now when I pull data in BW I only want to load the record for most current i.e. 07-2007. I DO NOT want that ALL the records since the day the position was created should be loaded.
Now I do understand this can be achieved using a ABAP routine in the INFOPACKAGE. Below is the routine that I am using and what it is doing is that it is only bringing in the first record.
data: l_idx like sy-tabix.
clear: l_idx.
read table l_t_range with key
       fieldname = 'CALMONTH'.
l_idx = sy-tabix.
Current month only
l_t_range-low = sy-datum(6).      "Current month
l_t_range-high.
l_t_range-option = 'EQ'.                           "equals
l_t_range-sign = 'I'.
modify l_t_range index l_idx.
p_subrc = 0.
Can anyone suggest a solution as to why this is happening?
Thanks,
Rahul

One explanation would be
- If there is no CALMONTH selection values specified in the selection tab, l_t_range would be empty. This would mean there would be no line for CALMONTH selection, and the code won't modify the l_t_range.
If this is true, you need to check sy-subrc after reading from the itab.
data: l_idx like sy-tabix.
clear: l_idx.
read table l_t_range with key fieldname = 'CALMONTH'.
if sy-subrc = 0.
l_idx = sy-tabix.
* Current month only
l_t_range-low = sy-datum(6). "Current month
* l_t_range-high.
l_t_range-option = 'EQ'. "equals
* l_t_range-sign = 'I'.
modify l_t_range index l_idx.
else.
move 'CALMONTH' to l_t_range-fieldname.
l_t_range-low = sy-datum(6).
l_t_range-sign = 'I'.
l_t_range-option = 'EQ'.
append l_t_range.
endif.
p_subrc = 0.

Does UK hosting with Business Catalyst include VAT? Can it be paid for per year?

I have been using Adobe Muse for about a year - LOVE IT! I'm starting to get professional business's as clients who obviously want quotes for their websites and hosting. I would like to stick with Business Catalyst for hosting...their online help support (chat) is just fantastic.
Anyhoo, there is no effective price structure for this. It is all in US Dollas which is taking me a bloomin decade to convert. And, do the prices include VAT? It doesn't say anywhere. Can the plans be paid for annualy? It seems very unhelpful on the Adobe website.
Also, please tell me if I am misunderstanding...Adobe can bill the clients for the hosting. Which is great. But obviously I am a business and put my percentage on top. So how would that work?
Its a long ol' curve to learning something 100%..any help or advice here would be much appeciated. Thanks.

Hi,
BC only bills in US or AU dollars at this stage. You might want to reference the partner help guides under "Account & Billing" to see how billing your clients and custom pricing works within BC. - http://www.businesscatalyst.com/support/partner-help
There's two billing frequency options (monthly or annually). Furthermore if needing more assistance with account related questions I would recommend reaching out to the account team to help answer all your remaining questions to be 100% certain before moving forward.
- http://helpx.adobe.com/contact/index.html (Select Business Catayst and proceed)
Kind regards,
-Sidney

My 30GB iPod battery last only for 1 year and 2 months.

i got my ipod in makati city, philippines at the PowerMac center in Greenbelt 3, ayala center.. now i have to buy a new battery for my ipod for me to use it again.. but i just want to know find out why is my ipod battery didn't last that long?. and if i am going to get it replaced, then how much will i pay for?. i check it online, but the price maybe different if i get there in manila or somewhere here in the philippines coz everything here is expensive to buy..
it sometimes become double the price.. so i want to know if could get it cheaper coz i broke my ipod just after the warranty period last (the 1 year warranty)..
thanks alot..
<Edited by Moderator>

Did you see if they have batteries at the PowerMac center?
They are available at CDR King.
http://www.yugatech.com/blog/anything-apple/cheap-ipod-battery-replacement-at-cd r-king/
Makati City - Ayala MRT Station
C-31 Concourse Level, Ayala Station, San Lorenzo Village, Makati City.
Store Hours: 11:30am-8:30pm
815-9670
11:00AM-8:00PM

Display Column only when Current Year Selected

Hi Gurus,
1)I have a Req where in I need to Display a Column only when 2012 is selected,It shouldn't appear when i select 2010 & 2011 in the Prompt.
2)I have to display a column only when the Last month of the Quarter is selected.
Any help???

Hi,
Make it two reports, one with the column and the other report without the column. Place both the reports in two different dashboard sections and use conditional show/hide section as explained here,
http://total-bi.com/2011/01/obiee-hide-show-sections/
Regards,
Dpka

MI31, Include Previous Inventoried batches Flag, WHY only for current year

Similar Messages

Maybe you are looking for