免 Chaines Char not accepted in QA system, working fine in Dev and PROD

Hi Experts,
I am stuck withchines char e.g. 免
BW QA is not accepting it, I can see the PSA data 免 converted to #, where as same records show proper 免 in BW DEV and PROD.
I checked the data in source system (RSA3) properly showing 免.
I rechecked the SM59 RFC setting in QA and compare with DEV.
All system are unicode supported.
Please help to resolve.
Thank-You.
Regards,
VB

I crated a new flat file text datasource and tried to load data (chines char) and that to work in QA.
Don't understand what's issue with 0CUST_SALES_ATTR extractor. ?
Any help/experience is welcome.
Thank-You.
Regards,
VB

Similar Messages

Smartform working fine in DEV and Quality But Problem in Production server

Hi
i had done a smartform ..that is working fine in devlopement and
quality server but the data in few of the column not appearing in production
server.i had debug it and found prolem in S0RT Syntax ..Had not faced this kind of problem before i had 20 records in my itab.
iam sorting it by vbeln and posnr ....
and deleting the adjacent duplicates ....comparing veln and posnr...
both are same ..in 20 records .
but iam fetching the adrees number at first in the loop.
so the first record of table is with adrs number...
                                                   vbeln          posnr
a1       a2      a3            a4    a5     a6              a7              a8          a9
ARE1 2006 1000029708 1   2011 513009012 CIS/M08607 471403 290644
ARE1 2006 1000029708 1   2011 513009012 CIS/M08607              290644
ARE1 2006 1000029708 1   2011 513009012 CIS/M08607              290644
ARE1 2006 1000029708 1   2011 513009012 CIS/M08607              290644
ARE1 2006 1000029708 1   2011 513009012 CIS/M08607              290644
if i sort the above table in devlopement and quality ..it will be in the same way
as above but in production it gets sorted in this way
                                                   vbeln          posnr
a1       a2      a3            a4    a5     a6              a7              a8          a9
ARE1 2006 1000029708 1   2011 513009012 CIS/M08607              290644
ARE1 2006 1000029708 1   2011 513009012 CIS/M08607              290644
ARE1 2006 1000029708 1   2011 513009012 CIS/M08607              290644
ARE1 2006 1000029708 1   2011 513009012 CIS/M08607              290644
ARE1 2006 1000029708 1   2011 513009012 CIS/M08607 471403 290644
and when i delete duplicate only i get
                                                   vbeln          posnr
a1       a2      a3            a4    a5     a6              a7              a8          a9
ARE1 2006 1000029708 1   2011 513009012 CIS/M08607              290644
in this where i dont get the adrs number so cant get adrs detail...
Can anyone theie tell me what is the problem with it ONLY IN PRODUCTION SERVER..
ITS WORKING FINE DEV AND QUALITY SERVER...
REGARDS....

are u using my DELETE keywords ?
if yes , then use
delete adjacent duplicates from itab comparing all fields.
Regards
Prabhu

Flash objects not displaying in Firefox (but works fine in Chrome and IE)

Well, I'm trying to embed a Shockwave Flash object into a website I'm building. It displays in Chrome and IE, but it doesn't show up at all in Firefox. It's just white space. Ive tried it on two machines, so it's presumably the code. Both the machines have Adobe Flash enabled... I'm not sure what the problem is. I've not worked with embedding Flash objects in HTML before, so, it's probably something really obvious. I just used the insert command on dreamweaver and it wrote the code that I'm using. If anyone can help me, it would be much appreciated. Here's my code:
<pre><nowiki><object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="99%" height="600" id="FlashID">
<param name="movie" value="The file path" />
<param name="quality" value="high" />
<param name="wmode" value="opaque" />
<param name="swfversion" value="10.1.0.0" />

<param name="expressinstall" value="../Scripts/expressInstall.swf" />


<object type="application/x-shockwave-flash" data="the file path" width="99%" height="76.5%">

<param name="quality" value="high" />
<param name="wmode" value="opaque" />
<param name="swfversion" value="10.1.0.0" />
<param name="expressinstall" value="../Scripts/expressInstall.swf" />

<div>
<h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
<p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
</div>

</object>
</nowiki></pre>

If you can't post an address for a page demonstrating the problem, could you check the Web Console (Ctrl+Shift+k) and Browser Console (Ctrl+Shift+j) for any messages related to the Flash media? For example, does either console show that Firefox is requesting the SWF file? Does either show an error in content type or any kind of security message?

DC not deploying in QA but working fine in DEV

Hi All,
I have created one activity in DEV for one view from one DC then I made some changes and checked in (NWDI), activated and released.
Later trying to deploy it into QA server it is not deploying, giving error like :
(Activity name)staging deployment partially completed due to some DC deployment is finished with error.
but we haven't touched this DC.
earlier we havn't faced this problem, we have upgraded QA SP 9 to SP11.
If we run the application from QA getting error like NoClassDefFound error.
Even we are trying to deploy another DC which we are getting error at deploy time it self also not deploying.
what might be the problem? Any ideas from experts?
Regards,
Srikanth

Hi Parama,
Thank you.
I tried so many times to recheck in DEV server even though it is giving same error?
Regards,
srikanth

Source System Mapping between BW Dev and Prod system

Hi,
I have a DB Connect Source System in BW Dev system called DBSRCDEV which points to one of our Oracle Dev DB.
In Production, the DB Connect Source System is called DBSRCPROD and it points to the corresponding Oracle Prod DB.
In Development, I created a data source on this Source System (DBSRCDEV) and I tried to transport it to Production. But it failed with error saying that DBSRCDEV does not exist.
Where and how can I maintain or configure the mapping between DBSRCDEV and DBSRCPROD Source System so that I can transport my data source to Production?
Please help.
Thanks,
CH

Hi,
usually you need to maintain the setting for the change of the logical system name (source system) in each target system of a transport. So in your prod system goto rsa1->tools->change logical system names...
After maintaining that table, try to import your request again.
regards
Siggi

Premiere elements12 will not accept ADOBE ID that worked for photoshop elements 12, help

premiere elements will not accept ADOBE ID that worked for photoshop elemets 12

katmama
From one of your prior threads, you appear to be working in Windows 8.1 64 bit with your Premiere Elements 12.
Where are you when you say that Premiere Elements 12 will not accept your Adobe ID - are you at the Sign In dialog step of the end of the
installation? Whatever the location, what is being rejected or not recognized specifically - can you tell if it is the Adobe ID or password?
Are you working with antivirus and firewall(s) disabled?
Please check out the following troubleshooting steps and let us know if any of them worked for you
http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
ATR Premiere Elements Troubleshooting: PE12: Sign In Failure (Connect to Internet or Fix Computer Clock)
Do you have more than one Adobe ID with Password Account?
We will be watching for further developments and will have more comments based on your reply.
Thank you.
ATR

I have a problem with the device does not accept 5 slot after work and survey content is not possible activation of the device and iTunes

I have a problem with the device does not accept 5 slot after work and survey content is not possible activation of the device and iTunes imei: 01******206
<Personal Information Edited by Host>

لدي جهاز ترقفت الشبكه ويعطي جاري البحث وتم تحديثه ولم يتم حل المشكلهة والان الجهاز لايقبل التنشيط والايتونز لايتعرف عليه امل تنشيطه 013619004986206

I prefer to arrange my photos by title but when I shut down Iphoto, my photos rearrange by date. This is not acceptable for my growing library of snanned black and white ancestral photos. How do I get photos in events to stay in place ?

I prefer to arrange my photos by title but when I shut down Iphoto, my photos rearrange by date. This is not acceptable for my growing library of snanned black and white ancestral photos. How do I get photos in events to stay in place ?

I actually am illiterate on the use of the finder to to view photos in folders. I guess I will go to a class at the local Apple store for a lesson on the uses of finder .
My method of viewing my photos are through events in I photo.
1. Download from camera or scan in from old photos.
2 I organize photos into events by occasion, or happenings in a certain year, or a group of photos with memorabilia of a certain person from childhood and on. etc.
3. Because Iphoto does not allow rearranging as I was able to do in my old PC with Corell, I drag all of the photos to an " album" on the left side of sceen.
4. I arrange photos in "order" after which I number each photo in sequence. I do this for a few of reasons.
          - if a photo is accidentally deleted I know it. I can usually remedy this by checking my trash or
rescanning.
          - I can sort by title without complications and this holds in "album"
5. The pictures will re arrange automatially to match the album in I photo.
6. This worked great in I-photo 09 but now in mountain lion the pictures in events go back to "
sort by date" and will not hold "sort to Title"each time I photo is closed down. What a nuicance it is to have to go to view and click "title" again and again every time Iphoto is opened.
7. Can I go back to Photo 09? .

On a 3 system network and utilizing a network harddrive to store the profiles, 2 systems work fine, the 3rd indicates 'file being used' and wants to use another profile.

On a 3 system network, utilizing a network harddrive to store the 'profile folder', 2 systems work fine as long as only one is used at a time, but the 3rd system shows a 'profile in use' error all the time and wants to use another profile. 2 of the systems are running Win7 64-bit and 1 is running XP 32-bit. One of the Win 7 systems and the XP system work fine utilizing the same profile on the network harddrive. The two working systems have been shutdown and the error continues for the third system. All 3 systems are running Firefox 3.6.6. What is the problem? Please note that the same setup was used for Thunderbird and ALL 3 systems worked as planned.
== 3rd system was setup to use the same profile

Hi Torsten,
Thanks for your reply.
netsh winhttp show proxy revealed that proxy settings were set to a test proxy without bypassing local addresses.
I used netsh winhttp set proxy proxy-server="http=proxy.mydomain.net:8080" bypass-list="*.mydomain.net;<local>"
to set the correct proxy settings, restarted the server and updates started coming in.
Source:
http://serverfault.com/questions/427058/why-is-windows-update-suddenly-failing-with-error-0x80244019
Grts.

Please can anyone help with the continuing password rejection problem with email.Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

Please can anyone help with the continuing password rejection problem with email on my imac.My Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

I use free Yahoo mail webMail access because folders I created in webmail access doesn't get set up in Apple Mail. While I was searching for post about password and keychain issues, I stumbled on several threads that complain about Mail folder issues, so I'm holding off on Apple Mail.
On the password and keychain issue that your post is all about. I've been using login keychain to save and automatical fill my login screens for a year or so successfully, with Safari and Chrome. Automatic form fill also works for Facebook login. Unfortunately, about 4 to 6 months ago, automatic password form fill stopped working with Yahoo webmail, while still worked for GMail (Safari and Chrome). I tried deleting the password entry for my two Yahoo email accounts to start fresh, but neither Safari not Chrome will even ask me if I want to save the password. I was so frustrated that I eventually installed the keypassX 0.43 (password manager) that is quite primitive sompare to OS X's keychain (when it works). Probably no surprise to you yet.
The surprise, to me at least, is that, for whatever reason, password auto form-fill from keychain started working again for Yahoo webmail login on Safari about 5-7 days ago. Still doesn't work on Chrome!
Two tips I can share, at least with webmail access:
1. Password is save only for one of my yahoo mail accounts. When I login in with my other yahoo account, I get no prompt to save the password, and form fill doesn't work when I try to log in a second time with my other Yahoo mail account.
2. On inspection of my login keychain, I see a webform password item saved for my Yahoo account that works with keychain. The name of the password is: login.yahoo.com(MyAccountName1#). When I open the password item and look in the Access Control tab, I see Safari and Chome are listed as allowed to access this password item..
I also an "Internet password" item with a name of just login.yahoo.com. When I open the the password item, it looks just like the password item created for MyAccountName#1, but the MyAccountName#2 is listed in the Account field. Inside the Access Control tab, no apps are listed in access permission. I added Safari and Chrome to the lists of allowed app, saved the password item.
Now when I bring up the Yahoo login page(by bookmark) on Safari, form fill fills in MyAccountname#1 for name and the proper password and I can login in. When I change the name to MyAccountName#2, the correct password is retrieved and I can log in! Alas, it still doesn't work on Chrome.
BTW, I changed the password item type from "Internet password" to "Web Form password" and saw no difference! I also edited the name to be "login.yahoo.com (MyAccountName#2)" to look like the web form password item that works, but it has no effect either.
From my experimentation, here's my observation:
1. A Web Form password item is created for the first account name(MyAccountName#1) for login.yahoo.com and typed as Web Form password. When I log in using MyAccountName#2, an Internet Password is created, but no applications are listed as allowed to access the password item, even when the password item was created after just logged in and logged out to yahoo with the account name and password for MyAccountName#2.
2. Manually adding Safari as an app that is allowed to use the password item works. Doesn't work with Chrome!
The version of Safari I'm using is Version 5.1.7 (6534.57.2). My installed version of Chrome is Version 21.0.1180.79 beta.

The enter key is not working in firefox but it has working fine in chrome and IE so please help me to rid out from this.

The enter key is not working in firefox but it has working fine in chrome and IE so please help me to rid out from this.

Hello gokulaan, '''try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

I have a Mac running 10.9.2. My wireless mouse with not scroll in mail but works fine in other applications? Any suggestions?

I have a Mac running 10.9.2. My apple wireless mouse will not scroll in Mail but works fine in other applications.
Any suggestions?

First, see this discussion. If the solution suggested there doesn't work for you, continue.
If you've installed a Mail plugin called "Mail Unread Menu" and you know how to remove it, please do that, then quit and relaunch Mail. Test. Otherwise, see below.
Back up all data.
1. Triple-click anywhere in the line below on this page to select it:
~/Library/Mail/Bundles
Right-click or control-click the highlighted line and select
Services ▹ Open
from the contextual menu.* A folder may open, or you may get an error message that the item can't be found. Either result is normal. If the folder does open and has contents, move the contents to the Desktop. Relaunch Mail and test. If there's no change, put the contents of the folder back and quit Mail again.
2. Repeat with this line:
/Library/Mail/Bundles
This time you may be prompted for your login password when you remove the items. Make sure they're removed from the folder and not just copied to the Desktop. If necessary, copy them first and then move the originals to the Trash.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

In firefox, the video from website "tv.vu.edu.pk" is not displaying even i have installed the latest version of JAVA. There rotates a circle around java monogram every time but video is not playing even it is working fine with internet explorer

In firefox, the video from website "tv.vu.edu.pk" is not displaying even i have installed the latest version of JAVA. There rotates a circle around java monogram every time but video is not playing even it is working fine with internet explorer

It's not working here as well with Java 6 U25 on Linux.

Rendered images are not appearing on the webpage. works fine on IE. All plugins appear to be present includeing Adobe Flash

rendered images are not appearing on the webpage. works fine on IE. All plugins appear to be present including Adobe Flash

If that only happens on a specific page or domain then make sure that you do not block images on that domain.
See [[Images or animations do not show]]
*A way to see which images are blocked is to click the favicon (<i>Site Identification</i> icon) on the left side of the location bar.
*A click on the "More Information" button will open the Security tab of the "Page Info" window (also accessible via "Tools > Page Info").
*Go to the <i>Media</i> tab of that "Tools > Page Info" window.
*Select the first image link and scroll down though the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
*You can see the permissions for the domain in the current tab in Tools > Page Info > Permissions
*You can see all image exceptions in Tools > Options > Content: Load Images > Exceptions

While notes, reminders and calendar are working fine, keynote (beta) and pages (beta) are not responding, they are sticking. What should I do? I would appreciate help. Thank you.

while notes, reminders and calendar are working fine, keynote (beta) and pages (beta) are not responding, they are sticking. What should I do? I would appreciate help. Thank you.

Unfortunately, most of my advice is in the "hindsight is 20-20" category.
First off, I would never have purchased the peripheral accessories until the 14 day return period had expired. Second, you learned the hard way what the "14 days" really means.
Too bad you didn't do any homework, reading this and other forums and tech sites. Even word of mouth from others. That, more than anything could have steered you towards different phone choices from the get-go and I will leave that there with no further comment other than to say most of the issues you described have been discussed in this forum, ad nauseam.
Once you got into the refurbished phone exchanges, that is where things really went haywire. What someone tells you over the phone is a sketchy proposition, and when it comes down to it, it's your word against theirs.
I think Verizon tried to make it right, though. Remember, they don't make the phones. Don't throw the baby out with the bathwater.
You stated yourself you were a satisfied Verizon customer before this. Had the first two phones performed as they should, you would still be a satisfied Verizon customer.
Doubt any of that will make you any happier, but after you went through the effort of writing such a long post, I thought I'd try.

免 Chaines Char not accepted in QA system, working fine in Dev and PROD

Similar Messages

Maybe you are looking for