MIB and OID trouble

I am making a program to visualize the topology of our network at work, how switches and other network-components are aranged. My problem is to get the rigth information from the network-components because I dont know the object identifiers (OID) in the MIB in the network-component.
what is the OID to get to know if the network-component are connected (in use) or not..
what is the OID to get to know what other network-component the component are connected to..
I realy hope you can help me with this.. thanks a lot.
esben

In general it isn't going to happen.
The SNMP protocol is not defined to such a level that you can be sure of what a SNMP enable device is going to do. So you need the MIB and the documentation for each device.
Now if every single device is from a single small manufacter (or one division of a large company) and all of them are from the same time period (probably all purchased within a year of each other) then you might get lucky in that the functionality is basically the same for all of the them.

Similar Messages

Callmanager MIB and OID

Is there a way a I can find more details about CISCO-CCM-MIB and its OIDs ? I am in a mid of uploading the CISCO-CCM-MIB to Network Management App and select appropriate OIDs.. Can some one point me to a good document or link for monitoring the alarms and critical events on the Cisco Callmanager 7 cluster using SNMP MIBs ?

The supported mibs for CallManager should be located on a page under the support lists here:
http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml
And for MIB detail information, you can hit http://www.cisco.com/go/mibs and navigate to find the CISCO-CCM-MIB, or alternatively directly to where our mibs are available via ftp:
ftp://ftp.cisco.com/pub/mibs/v2/

Cisco Call Manager MIB and OID.

Hi,
One of our customer has developed their own NMS software to manage multiple OEM products.
They want to integrate Cisco Call Manager 7.0 and Cisco Router with the NMS software for monitoring/managing of Voice traffic.
The monitoring of CUCM 7.0 will consists of the following-
1. Call History
2. Missed calls.
3. Calls in progress,
4, Dropped Calls.
The Monitoring of Cisco Router will Consists of Interface statistics and Portwise Traffic statistics of LAN and WAN Ports.
I believe this monitoring is done through Call Detailed Record and if I will load the CDR MIBs in NMS software it will be able to log CRD logs from CUCM 7.0.
Please suggest that if the same is possible.??.
kindly help me in getting the MIBs/OIDs for the same.
Best regards,
Puneet K.

Hi,
For 200+ users you should better go with Cisco CallManager (CUCM). Although ISR G2 supports 250+ users, it will not provide clustering mechanism and additional HA capabilities as CUCM does.
You can read the Call Processing chapter of the CUCM SRND:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/9x/callpros.html
Hope to help, please remember to rate helpful posts.
Kind regards,
- Adrian.

Aironet 1100 AP MIB and OID's

How can I get a list of the oid's that are subordinate to 1.3.6.1.4.1.9.1.507?
I need to know how to control these AP's with SNMP for a large deployment and I need specific controls. Thanks Websniper

Open the CSCOpx\etc\cwsi\devices.xml file in your management device for example ciscoworks you will find list of Member OID.

Questions on SSO and OID implementation on oracle EBIZ R12.0.6 ID 376811.1

Hello Guys,
IS ORACLE 10g enterprise edition is same oracle identity management because I am bit confused what is going on when we logged an SR we have been told to use oracle 10g AS (10.1.3.5) but in the note its always says oracle 10g AS 10.1.4.X. which is in turn an Identity management so we need install oracle 10gAS (10.1.3.5) then on top of that we install oracle identity management which comprises of OSSO and OID . is it correct ??
in reference note 376811.1
please advise
thanks
MN

Hello Hussien,
Anyways I upgraded to 10.1.3.5 patch_set 10gAs on ebiz r12.0.6
I have other question regarding the doc ID 376811.1
in there is section
Pre-Install Task 4: Apply the latest certified Application Server Patchset
Oracle E-Business Suite Release 12 is certified with the Application Server Patch Sets listed in the table below:
Certified AS Patchset Download Location One-off Patch details (if any)
Oracle Identity Management 10g Release 3 Patch Set 1 (10.1.4.2) 5983637 8811442
Oracle Identity Management 10g Release 3 Patch Set 2 (10.1.4.3) 7215628 8811442
Oracle Application Server and Oracle Developer Suite 10g Release 2 (10.1.2) Patch Set 2 (10.1.2.2.0) 4960210
Oracle Application Server and Oracle Developer Suite 10g Release 2 (10.1.2) Patch Set 3 (10.1.2.3.0)
5983622
Follow the installation instructions provided in the patch README to install the patch on your Identity Management Server and to check supported operating systems.
Oracle always recommends latest certified AS patchset for E-Business Suite customer
I installed oracle 10gas 10.1.4.0.1 its up and running so do i need to just apply the patchset oracle Identity management 10gR3 patcheset (10.1.4.3)
or I have to apply both 10.1.4.3 and the oracle Application server 10g release 2 (10.1.2)patch set 3(10.1.2.3.0) ???
because in enterprise manager application server control it says version 10.1.2.0.2 and identity management components show 10.1.4.0.1 .
thanks in advance.

My new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help

my new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help
my iphone4 is 10 times faster
i have backed up on itunes and restored but still no luck
even siri is lagging

my new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help
my iphone4 is 10 times faster
i have backed up on itunes and restored but still no luck
even siri is lagging

SSO and OID concepts

Is there any document which explains the concept and architecure of SSO and OID concepts in simple words ??

Check the following notes/documents:
Overview of Oracle Single Sign-On
http://download.oracle.com/docs/cd/B32110_01/web.1013/b28957/toc.htm
Note: 261914.1 - Integrating Oracle E-Business Suite Release 11i with Oracle Internet Directory and Oracle Single Sign-On
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=261914.1
Note: 233436.1 - Installing Oracle Application Server 10g with Oracle E-Business Suite Release 11i
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=233436.1

AD and OID connector installation on Base version 11.1.1.5.0 failed.

Hi Experts,
I am trying to install AD and OID connectors on base oim 11.1.1.5.0
OID connector version: Release 9.0.4.12
AD connector version: Release 9.1.1.7
while installing these connectors in 3 steps
a. Configuration of connector libraries
b. Import of the connector XML files (by using the Deployment Manager)
c. Compilation of adapters
first step passed and it is failing at 2nd step and 3rd
Error:
DOBJ.XML_IMPORT_ERROR Missing root objectcom.thortech.xl.dataobj.tcUSR [DataObjectDef] (importable)
can anyone suggest me on this.
Thanks,

What's the error in the log files? full stacktrace?
-Bikash

I have updated my 4s iphone to ios 6.1.3 and have trouble connecting it to wi fi . i tried to back up it on itunes and then restore it but now i have left with a phone that still doesnt connect to wi fi and lost all my data. anyone knows how to fix it?

i have updated my 4s iphone to ios 6.1.3 and have trouble connecting it to wi fi . i tried to back up it on itunes and then restore it but now i have left with a phone that still doesnt connect to wi fi and lost all my data. anyone knows how to fix it?

If no change after restoring the iPhone with iTunes as a new iPhone or not from the backup, there is a hardware problem.

TS3899 "cannot get mail" in iphone5 suddenly. been using iphone to check 2 email accounts for months now, one is gmail and not troubled. the other is thunderbird and i get this error message now. no settings have been changed or anything! ideas?

hey all, I have been getting the "cannot get mail" error message on my iphone5 suddenly.
ive been using iphone to check two email accounts for months now, one is gmail and not troubled. the other is mail from thunderbird and i get this error message now saying it is not responding. no settings have been changed or anything, it just suddenly stopped receiving mail on my device as of Tuesday afternoon.
Does anyone have iny ideas about why? i have yet to update to the new OS7 yet, could that be it?

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Hello. May I ask: I am using Acrobat 6.0.2, and having trouble formatting a PDF created from multiple (jpeg) files. Each page is formatted to A4 size, portrait. But when I create the PDF, each sheet appears as tiny, in the middle of a huge white page.

Hello. May I ask: I am using Acrobat 6.0.2, and having trouble formatting a PDF created from multiple (jpeg) files. Each page is formatted to A4 size, portrait. But when I create the PDF, each sheet appears as tiny, in the middle of a huge white page. I cannot seem to find any controls to adjust this. Any advice appreciated.

Thanks CtDave, for the further info. Unfortunately, those suggestions are not working, which is strange.
....Until last week, I used to make multi-page PDFs straight from Photoshop: File > Automate > Make PDF. One simply choses the files, orders them, and creates a PDF. (Resolution doesn't matter; 300 DPI is no problem.) However, my new Photoshop CS5 does not have the option in Automate.
What I've done, seeing as Acrobat is letting me down, is use Bridge (new to me) to create the PDF. It worked without a problem, but seems like more work than the old PS method. I will download a newer version of Acrobat to see if that makes any difference.
.....Also, thanks Test Screen Name: I agree with you that jpeg is irrelevant, and that one can make a PDF from Photoshop (Print > Save As - pdf). But that only works for SINGLE PAGE pdf, not multiple pages as far as I can tell.
Kind regards,
Prince Nuada

How to write Join View Adaptor which will pull data from Siebel and OID ?

Hi Experts,
I wanted to write web service call where OIF will talk to OVD than OVD will have join adaptor which will pull few data like msisdn from Siebel and view data from oid like given name and generate SAML assertion.
I wanted to know how to write join adaptor for the same
Help Appreciated.

Hi Experts,
Is anyone has any idea on webservice call to OIF which will call OVD that will have join adaptor connecting siebel and oid ?
any help is appreciated

OIM User Creation Error After OIM and OID Intregation

Hi,
I am new in oim and i am getting popup error message for user creation from OIM application after oim and oid intregation through libovd.
Error message : LDAP create event failed : orclguid attribute has duplicate value.
please guide me for resolving error.
Thanks & Regards,
Rajeev

Hi,
Thanks for reply...i checked1307549.1 in metalink, In that link they are telling us to modify some tables in the data base.i have some question regarding the following steps please help.
=== ODM Solution / Action Plan ===
1. Use the following query to find fields with "plain text" values:
select svr.svr_name, spd.spd_field_name, svp.svp_key, svp_field_value
from svp
inner join spd on spd.spd_key = svp.spd_key
inner join svr on svr.svr_key = svp.svr_key
2. Set these plain text values to null after making backup of table.
*(kashyap:: Which fields values we have to change)*
3. Edit the Directory Server to re-set values.
*(kashyap:: could you please explain this)*
Expected error at this stage:
-- no "System Error call admin...", but that makes sense since the values in question pertained directly to the Directory Server --

I baught second hand iMac and having trouble to reset to factory setting Help pls

I baught second hand iMac and having trouble to reset to factory setting Help pls

The previous owner left a Recovery HD partition on the drive. You cannot use it because it will only install a version of OS X that is tied to that persons Apple ID. You cannot use his/her Apple ID nor reinstall his/her copy of OS X. You must start, literally, from scratch.
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Integration and reconciliation of OIM and OID

I need to do integration with OID and OIM, when i import the XML file, there are two XML files,
1) oimOIDuser
2) oimUser
which xml should be used for the integration of OIM and OID.
and for the trusted source Reconciliation.
-sudhan elango.

oimOIDUser.xml
If you are using OIM 9.1.0 or later then you don't have to import the connector
You can install it by copying the contents of the installation in OIM_HOME/xellerate/ConnectorDefaultDirectory
and then Deployment Manager-> Install connector and from the connector list select OID connector and Load
Hope it helps,
Saggu

MIB and OID trouble

Similar Messages

Maybe you are looking for